Download Wavecom WMO2 GSM 1900 Technical data

WMO2 G900 / G1800 / G1900
WCOM/GSM/WMO2/WMO2ATDOC
Friday 21 May 1999
4.10.10 Read Language Preference +WLPR
Application to GSM
GSM to application
Application to GSM
GSM to application
Command syntax:
AT+WLPR= <index >
Response syntax:
+WLPR: <value>
Read a Language Preference value of EF-LP. The first indexes sould have
the highest priority.
AT+WLPR?
Read command
+WLPR: 4
Four language preference are available in EF-LP
OK
AT+WLPR=1 Read first EF-LP index value
+WLPR: 5
Language preference is 5
OK
4.10.11 Write Language Preference+WLPW
Application to GSM
GSM to application
Command syntax:
AT+WLPW=<index >,<value>
Response syntax:
OK or +CME ERROR: <err>
Write a Language Preference value in EF-LP
AT+WLPW=1,5 Write Lang Pref equal to 5 in EF-LP with index 1
OK
EF-LP correctly updated
4.10.12
Application to GSM
GSM to application
Read GPIO value +WIOR
Command syntax:
AT+WIOR=<index >
Response syntax:
+WIOR: <value>
Set the I/O port as an input and read the I/O pin, 0 if the pin is reset, 1 if the
pin is set. Eight I/O ports are available, so the <index> value is between 0
and 7.
AT+WIOR=4 Read I/O (number 4) value
+WIOR: 0
GPIO number 4 is reset
OK
4.10.13
Write GPIO value +WIOW
Command syntax:
AT+WIOW=<index >,<value>
Response syntax:
OK
Set the I/O port as an output with a I/O pin value, 0 for reset, 1 for set
Application to GSM
GSM to application
AT+WIOW=4,0
OK
4.11
Reset I/O (number 4)
GPIO value is written
Other AT commands
4.11.1 V.25 ter recommandation
Other remaining basic commands are not implemented, so an "ERROR"
string will be sent back.
All commands about modulation control, error control and data
compression are not recognized. An "ERROR" string will be sent back.
4.11.2 GSM 07.05 recommandation
All the remaining commands are not implemented, so an "ERROR" string
will be sent back.
4.11.3 GSM 07.07 recommandation
All the remaining commands are not implemented, so an "ERROR" string
will be sent back.
WAVECOM confidential ©
77