Download Buick ManageUPS User manual

Specifications
Specifications
Table 1. Specifications for the ManageUPSNET Adapter
SNMP
SNMP UPS Agent conforms with SNMPv1 RFCs. Core Agent —
supplied under license from SNMP Research, Inc.
SNMPv1 compatible UPS Agent supports an SNMPv1
translation of RFC1628
MIB Support
Meets the requirements of the upsFullCompliance module
defined in RFC1628
RFC1213 (MIB-II) is supported
ONEAC Extended MIB Support
Network Interface
10Base-T Ethernet — Ethernet Class 1 (DIX) packet format
Serial Interface
Uses RS232 asynchronous port built into UPS for configuration
and updating.
Configuration and Control access via SNMP, HTTP, Telnet or
serial port connection.
Firmware update capability via FTP, TFTP and XMODEM
BOOTP, TFTP and FTP support for easy remote configuration.
MopNET for network shutdown.
Features
Console mode supports out-of-band management with external
modem.
Fault messaging via email and/or SNMP Trap.
Pass-through serial router allows ManageUPSNET to share a
single UPS communications port with other accessories such as
a local diagnostics terminal, PC with UPS software or external
modem for remote diagnostics.
4
Main Processor
Motorola MC68331 32 bit µController
Ethernet Controller
Standard Microsystems SMC91C94
Memory
512K RAM, 512K Flash memory
Power
5 VDC @ 200mA
Regulatory
Complies with FCC Class A emission requirements
ManageUPSNET User Instruction Manual