Download SimView

Figure 34
“Tip” Remember that the Patient Monitor is regarded as one of the maximum 4 cameras that can be used
during recording. In order to enable Patient Monitor recording you must setup the SimView Extension
service and enable it in the Instructor Application, see chapter 4.5 and 4.6 on page 7.
5.2.10 Analog camera
Adding an analog camera follows the same line as the USB camera, but requires that the PC is equipped with
a Laerdal video grabber card. If you have more than one camera select the with the drop down list (6).
Figure 35
Figure 36
Figure 37
19