Download EtherNet/IP Scanner Protocol API

The Application Interface
136/216
Packet Description
Structure EIP_OBJECT_PACKET_TCP_STARTUP_CHANGE_IND_T
Variable
Type
Value / Range
Type: Indication
Description
tHead - Structure TLR_PACKET_HEADER_T
ulDest
UINT32
Destination Queue-Handle
ulSrc
UINT32
Source Queue-Handle
ulDestId
UINT32
Destination End Point Identifier, specifying the final receiver of the
packet within the Destination Process. Set to 0 for the Initialization
Packet
ulSrcId
UINT32
Source End Point Identifier, specifying the origin of the packet inside the
Source Process
ulLen
UINT32
ulId
UINT32
ulSta
UINT32
ulCmd
UINT32
ulExt
ulRout
24
Packet Data Length in bytes
32
0 ... 2 -1
Packet Identification as unique number generated by the Source
Process of the Packet
See chapter Status/Error Codes Overview..
0x1A28
EIP_OBJECT_TCP_STARTUP_CHANGE_IND - Command
UINT32
0
Extension not in use, set to zero for compatibility reasons
UINT32
x
Routing, do not touch
tData - Structure EIP_OBJECT_TCP_STARTUP_CHANGE_IND_T
ulStartupMod UINT32
e
0…2
Start mode, how to set the IP-address
ulIPAddr
UINT32
Valid IP
address
IP address
ulNetMask
UINT32
Valid Network
mask
Network mask
ulGateway
UINT32
Valid Gateway
address
Gateway address
ulEnFlags
UINT32
See above
Flags
ulBaudrate
UINT32
Baud rate to apply (10/100 Mbit/s)
Table 85: EIP_OBJECT_TCP_STARTUP_CHANGE_IND – Indicate change of TCP parameter
EtherNet/IP Scanner |
DOC050702API10EN | Revision 10 | English | 2010-12 | Released | Public
© Hilscher, 2006-2010