Download Micro800 Programmable Controllers General Instructions

Transcript
Input/Output instructions
Chapter 15
LCD_BKLT_REM status codes
Status code
Description
0
Enable input is false.
1
Success.
2
Remote LCD not detected.
May occur when:
•
Remote LCD is not physically connected to
the controller (or the wiring is incorrect).
•
Serial port settings are other than what is
required for the Remote LCD.
3
Connection error.
May occur when there is an internal state machine error. (Possibly
caused by an incompatibility between Controller FW version and
RLCD FW version.
4
Invalid color code.
5
Invalid mode.
6-65535
Reserved.
RockwellAutomationPublication2080-RM001B-EN-E-March2014March2014
351