Download YR-680U 英文(201106131700085755).cdr
Transcript
Thank you for your purchasing this product. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. 彩 色 高 清 摄 像 机 CAUTION 使 用 说 明 书 ! RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL DESCRIPTION YR-680U employs 1/3" High Sensitivity CCD概 and述 HAWK DSP image processing technology, 3-DNR, whose operating speed is 100 times higher than the traditional one's. Its resolution is as high as 600TVL. When light change reaches a certain value, sense up switches on automatically, which greatly increases image sensitivity and makes it get perfect pictures under any light and truly reaches the starlight level sensitivity. It supports BLC, White Balance, AGC, Flicker Prevention, Motion Detection, Privacy and other functions. The advanced digital noise reduction eliminates the noises effectively, making the picture clearer and brighter. High Resolution Color Camera User Manual Advanced image processing technology, realizes 600TVL, high definition and bright images YR-680U 600 TV Line 420 TV Line PRECAUTIONS 1. Use the appropriate power The input power for YR-680U is DC12V/AC24 . Be sure to connect it to the appropriate power. Wrong connection may cause malfunction and/or damage to the camera. 2. Do not attempt to disassemble the camera. To avoid electric shock, do not remove screws or camera housing. There are no user serviceable parts inside. Ask a qualified service person for servicing. 3. Handle the camera with care. Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handling or storage. 4. Do not expose the camera to rain or moisture, or try to operate it in wet areas. Do not place the camera in the following locations: ①Locations where temperature is lower than -10C or higher than 50C; ②Locations where humidity is higher than 95%; ③Locations where there are large amounts of water vapor and steam. 5. Do note use strong or abrasive detergents when cleaning the camera body. Use a dry cloth to clean the camera when dirty. In case the dirt is hard to remove. Use a mild detergent and wipe gently. 6. Clean the CCD faceplate with care. When cleaning the CCD panel, do not use strong or abrasive detergents. Use a piece of lens tissue or cotton tipped applicator and ethanol. 7. Do not attempt to aim the camera at the sun Do not attempt to aim the camera at the sun or other extremely bright objects that cause smear to appear irrespective of whether the camera is operating or not. This can damage the CCD (Charge Coupled Device). 8. Do not put the camera in a place with interference. When this camera is installed near the equipment like wireless communication device which emits strong electromagnetic field, some irregularity such as noise on monitor screen may happen. FEATURES 产品特征 Digital WDR 数 字 宽动态 DC12V/AC24 Duplicate Supply Design Advanced digital WDR technology greatly improves the effect to gain bright images in dark. Compatible with DC12V and AC24V. It can switch over to the suitable mode according to the input power supply. High 高 清Resolution 晰度 Horizontal 600 TVL High Resolution OSD Menu HS-BLC 强光抑制 Powerful menu operation function, which can set all functions of the camera. Automatically distinguish strong light piont, shield the strong light on the image to improve the definition of the image for better surveillance. Day & Night Adopt the color mode in day, when the light is enough; at night when the illumination is lower, higher sensitivity and image quality are needed, so it changes to W/B mode automatically. 3-DNR (Digital Noise Reduction) adopt special caculation rules,reduce the noise of video and color, improve the definition of the image, create clear and scrip images. SPECIFICATION 基本参数 PARTS INSTRUCTION Function Instruction Model 2 1 Sensor 3 4 6 5 1、CS-Mount Lens Adapter 2、 Back Focal Length Fixing Screws 3、Auto Iris Lens Interface 7 8 1.Control – 1 3 2 4 2.Control + 3.Drive + 4.Drive - Right Up Menu Left Down ≥50dB(AGC Off) 4×.8×.16×. 32×.64×.128×.256×.Off Low、Middle、High、Off On;Off;High light Suppression Electronical Iris/Auto Iris (DC Driver) Motion Detection Privacy Adjustment Title OSD Function Setting: 3-DNR Digital WDR Sync Mode Menu: OSD Menu,choose OSD menu or quit. Up/down:Up and Down button moves vertically Left/right:Left and Right moves horizontally or modify paramete,rs,, with “ ” means with inferior menu setting, press“Left/Right”for setting,“back ” for superior menu setting. Voltage Power Current Lense Dimension 外观尺寸 126. 5 Operating Temperature Storage Temperature Dimension(mm) 56 Weight .Specifications subject to change without notice. 6 9. 9 135 .8 PAL/NTSC 600TVL 0.01Lux Sense Up Electronic Shutter Mode White Balance Range OSD Menu Mirror Day&Night Auto Iris Interface Definition YR-680U 1/3" High Sensitivity CCD S/N Ratio AGC BLC Iris Control 4、OSD menu 5、Bracket Screw Fixing Hole 6、video out 7、PWR: Power Indicator LED 8、Power in NO. DC Drive Sensor Video Format Resolution Mini Illumination 1/60(1/50)-1/100000 Second Manual, Auto Tracing, Automatical (Automatical) 2200~10000°K Horizontal, Vertical, Rotation Auto、Color、Monochrome On/Off On/Off Brightness, Sharpness On/Off(Max15Characters) On/Off Off; Indoor; Outdoor Internal DC12V/AC24V <100mA CS Mount -10 ℃~50 ℃ -20 ℃~50 ℃ 136(L) * 56(H) * 70(W) 450g CAMERA 摄 MENU OPERATION 像 机FUNCTION 菜 单 功 能 操 作 主 菜单: Main Menu : LENS : SETUP LENS EXPOSURE WHITE BAL DAY/NIGHT 3DNR SPECIAL ADJUST RESET EXIT 3DNR DC SPECIAL: AWB COLOR ON LEVEL RETURN 50 1、Click the MENU button to show the main menu, and move cursor to SPECIAL by up and down 特殊 功 能 : buttons. Click the MENU button to enter setting. SPECIAL 1、Click the MENU button to show the main menu, and move the cursor to EXPOSURE. Use left When set as DC driver, brightness range can be set between 1~100. 镜头: and right buttons to set "LENS". MANUAL: manual Iris lens; DC: DC driver Iris lens. CAM TITLE OFF D-EFFECT MOTION OFF PRIVACY OFF SYNC INT RETURN LENS BRIGHTNESS 50 ETURN 2、Move the cursor to CAM TITLE, and set CAM TITLE by left and right buttons: OFF/ON. It can edit 15 Cam Title at most. EXPOSURE : 调 整 : the MENU button to show the main menu, and move the cursor to 1、Click EXPOSURE by up and down buttons. Click MENU button to enter setting. CAM TITLE 0 A L X EXPOSURE SHUTTER 1/50 BRIGHTNESS 50 MIDDLE AGC SENSE-UP AUTO BLC OFF D-WDR OFF CLR POS END 2、Move the cursor to SHUTTER, and set SHUTTER by left and right buttons: 1/50,FLC,1/250, 1/500, 1/2000, 1/5000, 1/10000, 1/100000. 3、Move the cursor to BRIGHTNESS, and set BRIGHTNESS by left and right buttons between 0-1009 (only available when the lens is in manual mode and shutter in auto mode.) 4、Move the cursor to AGC, and set AGC by right and left buttons: LOW; MID; HIGH; OFF. 5、Move the cursor to SENSE UP, and set SENSE UP by left and right buttons: ×4: 4 times; ×8: 8times ; ×16: 16times; ×32: 32times; ×64: 64times; ×128: 128 times; ×256: 256times; OFF (only available when the lens is in manual mode and shutter in auto mode; when the lens is set as DC and shutter set as fixed 1/50) D-EFFECT OFF OFF D-ZOOM OFF GAMMA 0.45 D-ZOOM D-ZOOM PAN ×32 X 32 4 5 TITLT RETURN 6、Move the cursor to BLC, and set BLC by left and right buttons: OFF; BLC; HSBLC BLC MIDDLE 4、Move the cursor to MOTION, and set MOTION by right and left buttons: OFF/ON. When MOTION is set as ON, it can set: Motion Area: motion area is divided into 4 areas; AREA DISPLAY: OFF/ON. Area Position: LEFT/RIGHT; TOP/BOTTOM; Area Size: WIDTH; HEIGHT; SENSITIVITY: 0~40 level MOTION 2 LEFT/RIGHT WIDTH TOP/BOTTOM 4 3 HEIGHT 3 RETURN HSBLC LEVEL DEFAUALT 5 LEFT/RIGHT WIDTH 2 AREA SELECT AREA1 AREA DISPLAY ON LEFT/RIGHT 8 WIDTH 32 TOP/BOTTOM 4 HEIGHT 24 TOP/BOTTOM 4 3 HEIGHT 3 7、Move the cursor to D-WDR ,and set D-WDR by right and left buttons: Off; Indoor; Outdoor. 5、Move the cursor to PRIVACY, and set PRIVACY by left and right buttons: OFF/ON. When PRIVACY is on, it can set: Privacy Area: privacy area can be divided into 8 areas; AREA DISPLAY: OFF/ON; Area Position : LEFT/RIGHT; TOP/BOTTOM; Area Size: WIDTH: HEIGHT; Color: 0~15 level PRIVACY and down buttons. Click the MENU button to enter setting. 2、Move the cursor to WHITE BAL, and set WHITE BAL by left and right buttons: MANUAL: Manual White Bal; ATW: Auto Tracing White Bal; AWB: Automatical White Bal; When set as MANUAL, its color temperature can be set: RED: 0~100; BLUE: 0~100 1、Click the MENU button to show the main menu, and move the cursor to DAY/NIGHT by up and down buttons. Click the MENU button to enter setting. 2、Move the cursor to DAY/NIGHT, and set DAY/NIGHT by left and right buttons: AUTO: atuo color to black; COLOR; B/W: black and white. AREA SELECT AREA1 AREA DISPLAY ON LEFT/RIGHT WHITE BAL MANUAL 40 21 OFF RETURN WHITE 白 平衡 BAL: : 1、Click the MENU button to show the main menu, and move the cursor to WHITE BAL by up BLUE RED RETURN 40 SENSITIVITY MOTION VIEW RETURN 日DAY/NIGHT: 夜切换 : FREEZE MIRROR RETURN SENSE-UP GAIN DEFAUALT . 3、Move the curosr to D-EFFECT, and set D-EFFECT by left and right buttons: FREEZE: OFF/ON; MIRROR: OFF; MIRROR: horizontal mirror; V-FLIP: vertical mirror; ROTATE; D-ZOO: OFF/ON. It can make a 32 times digital magnification to the picture and set Gamma between 0.05~1. RETURN SENSE-UP RETURN 1 2 3 4 5 6 7 8 9 BC DE FGHIJK MNOPQRSTUV ( ) YZ & : ~, WIDTH 8 16 TOP/BOTTOM 8 HEIGHT 16 COLOR 0 RETURN ADJUST: 调节 1、Click the MENU button to show the main menu, and move the cursor to ADJUST by up and down buttons. Click MENU button to enter setting. 2、Move the cursor to SHARPNESS, and use left and right buttons to set: SHARPNESS value: 0~31; BLUE: 0~100; RED: 0~100 ADJUST DAY/NIGHT AUTO SHARPNESS 25 DELAY 5 BLUE 97 S-LEVEL 55 RED 89 E-LEVEL RETURN 65 RETURN RESET: 复位 Recover as factory default. DAY/NIGHT B/W 3DNR : 3D降噪 BURST RETURN RESET ON/OFF 1、Click the MENU button to show the main menu, and move the cursor to 3DNR by up and down buttons. Click the MENU button to enter setting. 2、Move the cursor to 3DNR, and set 3DNR by left and right buttons: OFF; ON: range 0~100; FACTORY RETURN EXIT : 退出 Exit menu after setting is finished. RESET