Download MYD-SAMA5D3X Development Board

MYD-SAMA5D3X Development Board









MYC-SAMA5D3X CPU Module as Controller Board
DDR2 SO-DIMM 200-pin Signals Consistent with Atmel's Official Board
536MHz Atmel SAMA5D3 Series ARM Cortex-A5 Processors
512MB DDR2 SDRAM, 256MB Nand Flash, 4MB Data Flash, 16MB Nor Flash
Serial ports, USB, Ethernet, CAN, RS485, SD, Audio, LCD, HDMI
Two Ethernet for SAMA5D35/36
Two CAN for SAMA5D34/35/36
HDMI and LCD Display for SAMA5D31/33/34/36
Ready-to-Run Linux 3.6.9 and Android 4.0.4
Figure 1-1 MYD-SAMA5D3X Development Board
Description
The MYD-SAMA5D3X Development Board is designed by MYIR for the newest Atmel ARM Cortex-A5 based
SAMA5D3 series processors which can operate at up to 536MHz. It has a base board which can be equipped with
five different CPU modules based respectively on Atmel’s SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 and
SAMA5D36 MPUs. All five CPU modules are sharing the same circuit design with minor configuration settings. It is
capable of running Linux and Android operating systems and offered with optional 4.3- and 7-inch LCD panels
USB 3G module, USB Camera module, USB WiFi module and GPS module. It can work in harsh environment
supporting -40 to +85°C extended temperature operation.
The CPU module has the most features of the processor and integrates 512MB DDR2 SDRAM, 256MB Nand Flash,
16MB Nor Flash and 4MB Data Flash on board. It is connected with the base board through a 1.8v DDR2 SD-DIMM
200-pin connector which provides an interface for the base board to carry all the I/O signals to and from the CPU
module. A set of peripherals have been brought out through headers and connectors on the base board including
serial ports, USB, Ethernet, CAN, LCD, HDMI, Audio, SDIO/SD/MMC, etc.
1/8
The MYD-SAMA5D3X Development Board comes along with Linux 3.6.9 and android 4.0.4 software packages,
necessary cable accessories as well as detailed documents to allow customers to start development soon when
getting the goods out of box. It is a solid and flexible reference design to enable users to extensively evaluate,
prototype and create applications that require audio, mass storage, networking, connectivity and more. Typical
applications are such as control panel/HMI, smart grid, medical and handheld terminals, smart watches, outdoor
GPS, DECT (digital enhanced cordless telecommunications) phones, etc.
The MYD-SAMA5D3X Development Kit includes following items and add-on options:
MYD-SAMA5D3X board
Product DVD
Optional Camera module
Ethernet cable
5V Power Adapter
Serial cable
Optional 4.3- or 7-inch LCD/TSP
Optional 3G module
Optional WiFi module
Figure 1-2 MYD-SAMA5D3X Development Kit
USB cable
Optional SO-DIMM200-pin socket
Optional GPS module
Below are the five partnerships for MYD-SAMA5D3X:
 MYD-SAMA5D31 Development Board – with MYC-SAMA5D31 CPU Module for Atmel SAMA5D31
 MYD-SAMA5D33 Development Board – with MYC-SAMA5D33 CPU Module for Atmel SAMA5D33
 MYD-SAMA5D34 Development Board – with MYC-SAMA5D34 CPU Module for Atmel SAMA5D34
 MYD-SAMA5D35 Development Board – with MYC-SAMA5D35 CPU Module for Atmel SAMA5D35
 MYD-SAMA5D36 Development Board – with MYC-SAMA5D36 CPU Module for Atmel SAMA5D36
Item
Processor
10/100 Ethernet
10/100/1000 Ethernet
UART
LCD/HDMI
CAN
2/8
MYD-SAMA5D31
MYD-SAMA5D33
MYD-SAMA5D34
MYD-SAMA5D35
MYD-SAMA5D36
ATSAMA5D31
ATSAMA5D33
ATSAMA5D34
ATSAMA5D35
ATSAMA5D36
0
1
1
1
1
1
2
1
0
0
2
1
0
0
2
1
2
Table 1-1 Comparison for Model Selection
1
2
0
2
1
2
1
2
Hardware Specification
The Atmel® SAMA5D3 series of microprocessor units (MPUs) is based on the ARM® Cortex™-A5 processor,
operating at up to 536MHz (850DMIPS) at under 150mW, delivering a high-performance, low-power platform for
cost-sensitive industrial and consumer applications. It has comprehensive peripheral set for connectivity and user
interface applications including Gigabit and 10/100 Ethernet, up to three HS USB ports, dual CAN, three
SDIO/SD/MMC, UARTs, SPIs, TWIs, soft modem, LCD controller with graphics accelerator, camera interface, 12-bit
ADC, 32-bit timers and more.
Figure 1-3 SAMA5D3 Series Key Features
The MYD-SAMA5D3X series development boards include one CPU module mounted on one base board. It exposes
many of the Atmel SAMA5D3 features to the user in support of developing specific solutions.
Figure 1-5 MYC-SAMA5D3X CPU Module
Controller Board of MYD-SAMA5D3X
Figure 1-4 Base Board of MYD-SAMA5D3X
3/8
This board is characterized as in below table 1-2:
Item
Processor
CPU Module
MYD-SAMA5D31
MYD-SAMA5D33
MYD-SAMA5D34
MYD-SAMA5D35
MYD-SAMA5D36
MYC-SAMA5D31
MYC-SAMA5D33
MYC-SAMA5D34
MYC-SAMA5D35
MYC-SAMA5D36
ATSAMA5D31
ATSAMA5D33
ATSAMA5D34
ATSAMA5D35
ATSAMA5D36
- 536MHz Atmel SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 and SAMA5D36 ARM Cortex-A5 Processors
- CPU internal 128KB of SRAM and 160KB of ROM
- On-board 512MB DDR2 SDRAM, 256MB Nand Flash, 16MB Nor Flash, 4MB Data Flash
- On-board Gigabit Ethernet PHY
- 1.8V DDR2 SO-DIMM 200-pin Expansion Connector
Dimensions
PCB Layer
Power Supply
Working Temp.
- SO-DIMM 200-pin Signals Consistent with Atmel's SAMA5D3-EK Official Board
CPU Module – 67.6 x 45mm; Base board – 154 x 110mm
CPU Module – 8-layer design; Base board – 4-layer design
5V/2A
Storages
0~70 Celsius (commercial grade) or -40~85 Celsius (industrial grade)
Serial ports
One 3-line RS232 Debug serial port (DB-9)
USB
One RS485 serial port (UART2, 10-pin 3.5mm pitch terminal block connector)
Ethernet
CAN
Audio
LCD/TSP
One Micro SD card slot
One SD/MMC card slot
One 5-line RS232 serial port (UART1, DB-9)
Two High-speed USB 2.0 Host ports (Type A)
One Mini USB 2.0 OTG port (Mini USB Type-AB)
ETH1_10/100
0
ETH0_10/100/1000
0
Audio input/output port
Support
Support
ETH0_10/100/1000
2
Support
ETH1_10/100
ETH1_10/100
2
2
ETH0_10/100/1000
Not support
Supports 24-bit true color TFT LCD, resolution up to 2048 x 2048 pixels
ETH0_10/100/1000
Support
4-line resistive touch screen
4.3-inch LCD for option (including Touch screen, with resolution 480 x 272 pixels)
Camera
HDMI
Telephone
JTAG
RTC
Buttons
7-inch LCD for option (including Touch screen, with resolution 800 x 480 pixels)
One ISI interface (driver is not provided at present)
One HDMI interface (driver is provided but no source code)
One Telephone interface (driver is not provided at present)
20-pin standard JTAG interface
Battery backed RTC socket (Battery CR1220 and CR1225 models are recommended)
LED
One Reset button, One Wakeup button and Two User buttons
Expansion
There expansion interfaces (J2, J3, J4) brings out:
Interface
Two Power indicators (Red, one on CPU board and one on base board)
One user LED (Blue, on CPU board)
2 x SPI, 2 x I2C, 1 x PWM, 4 x ADC, GPIOs
Note: The resources brought out from the expansion interfaces may be multiplexed with others. Please refer to the
product user manual and schematics for details for your development.
Table 1-2 Hardware Specification of MYD-SAMA5D3X Development Board
4/8
Function Block Diagram
Figure 1-6 Function Block Diagram of MYD-SAMA5D3X
Dimension Chart of MYD-SAMA5D3X
Figure 1-7 Dimension Chart of MYD-SAMA5D3X
5/8
MYD-SAMA5D3X Development Board Layout
Figure 1-8 MYD-SAMA5D3X Development Board Peripherals
Figure 1-9 MYC-SAMA5D3X CPU Module Top-view
Figure 1-10 MYC-SAMA5D3X CPU Module Bottom-view
6/8
Software Features
The MYD-SAMA5D3X is a Linux and Android ready-to-run development board. MYIR offers software packages
along with the board. Many peripheral drivers are provided in source code to help customers quickly start their
own development and create their own applications. The software features are summarized as below:
OS
Item
Boot
Features
Boot Strap
First boot program (source code available)
Boot Mode
Boot Linux from NAND Flash
u-boot
Image update
Linux
Kernel
File system
Drivers
Graphical
Library
Kernel
Android
Drivers
Description
File system
update
Version
File system
Format
Secondary boot program (source code available)
Support programming kernel image into Nand Flash through USB
Support programming file system into Nand Flash through USB
Linux 3.6.9 (source code available)
Supports ROM/CRAM/EXT2/EXT3/FAT/NFS/ JFFS2/UBIFS
UBIFS file system
USB Host, USB Device, Ethernet, MMC/SD, CAN, RS485, NandFlash, TWI (I2C), SPI,
WM8904 (Audio), LCD Controller, RTC, Touch-Screen, PWM, USART, LED
(source code available)
HDMI (no source code provided)
QT
Version
Already ported (source code available)
Android 4.0.4
Ethernet, Serial port driver (USART1, DBGU),
USB (USB_HOST*2,USB_OTG), SD card driver (Micro SD, MMC/SD),
LCD+touch (LCD and touch screen driver), GPIO driver
(source code available)
HDMI (no source code provided)
7/8
Order Information
Product Item
Part No.
Packing List
MYD-SAMA5D31 Development Board
MYD-SAMA5D31
MYD-SAMA5D34 Development Board
MYD-SAMA5D34
 One MYD-SAMA5D3X Development Board
 One DB9-to-DB9 Serial cable
 One Net cable
 One USB cable
 One 5V/2A Power adapter
 One Product DVD
(including user manual, datasheet, schematic in
PDF format and software packages)
MYD-SAMA5D33 Development Board
MYD-SAMA5D35 Development Board
MYD-SAMA5D36 Development Board
MY-LCD43TP 4.3-inch LCD Module
MY-LCD70TP 7-inch LCD Module
MY-SODIMM200 Socket
MYC-SAMA5D31 CPU Module
MYC-SAMA5D33 CPU Module
MYC-SAMA5D34 CPU Module
MYC-SAMA5D35 CPU Module
MYC-SAMA5D36 CPU Module
MYD-SAMA5D33
MYD-SAMA5D35
MYD-SAMA5D36
MY-LCD43TP
MY-LCD70TP
MY-SODIMM200
MYC-SAMA5D31
MYC-SAMA5D33
MYC-SAMA5D34
MYC-SAMA5D35
MYC-SAMA5D36
Add-on Options
 MY-LCD43TP 4.3-inch LCD Module
 MY-LCD70TP 7-inch LCD Module
 MY-SODIMM200 Socket
 MYC-SAMA5D3X CPU Module
 MY-CAM001U USB Camera Module
 MY-CU005U USB 3G Module
 MY-WF003U USB WiFi Module
 MY-GPS008C GPS Module
Remark:
1. One MYD-SAMA5D3X Development Board includes one CPU module MYC-SAMA5D3X mounted on the base board.
If you need more CPU module, you can order extra ones.
2. Our products are delivered of commercial grade (0~70 Celsius) by default. Anyhow the MYD-SAMA5D3X board
based on Atmel ARM Cortex-A5 processor can work in harsh environment with working temperature ranging
from -40 to 85 Celsius. Please contact us for price and availability of products of industrial grade if you needed.
3. The HDMI chip supports working temperature from -20 to +85 Celsius.
4. We accept custom design based on the MYD-SAMA5D3X, whether reducing, adding or modifying the existing
hardware according to customer’s requirement.
More details about the MYD-SAMA5D3X can be found at:
http://www.myirtech.com/list.asp?id=432
MYIR Tech Limited
Room 1306, Wensheng Center, Wenjin Plaza, North Wenjin Road, Luohu District,
Shenzhen, China 518020
E-mail: [email protected]
Phone: +86-755-22984836
Fax: +86-755-25532724
Website: http://www.myirtech.com
8/8