Download FDRMOVE FDRERASE - Innovation Data Processing

ME S S A G E S
AND
CO DE S
MESSAGES
390.3
program BYPASSED UNIT=uuuu CHANGEVOL NUMBER WRAPPED
Reason: This form of the FDR170 message is issued by FDRERASE or FDRINITV when
volumes were being relabeled by a CHANGEVOL= parameter that included slashes “/”
to generate a sequence number. The sequence number exceeded its maximum value
for the number of slashes specified.
FDR171
ERASE RELEASED ITS CSA STORAGE
Reason: FDRERASE released the small area of CSA it uses to track active and completed erase
operations.
FDR172
ERASE STARTED/ENDED PASS n PATTERN=hh
Reason: FDRERASE has started or ended pass “n” on a DASD volume, using pattern byte X'hh'.
See the description of the ERASEPASS= and ERASEPATTERN= operands for details.
The pattern is “ERASE” if the tracks are being hardware erased (ERASE pattern “01”).
FDR173
ERASE HARDENED DATA TO UNIT=uuuu IN nnn SECS errortext internal
Reason: At the end of a pass for ERASE or SECUREERASE, FDRERASE issued commands to
ensure that the overwriting data has been “hardened” from cache to the physical
DASD. This took “nnn” seconds. If an error occurred while hardening the data,
“errortext” appears; it can be “I/O ERROR” or “TIMEOUT”. TIMEOUT indicates that
the control unit has not acknowledged the hardening of the data for over the
HARDENTIMEOUT value (default 2 minutes), or the count of remaining tracks has not
decreased for some time. “internal” is some internal numbers about the hardening
operation. Note that this message may appear in the erase subtask listing
(SYSPRTxx) or the SWAP task listing (SYSPRINT).
Action: FDRERASE has successfully erased or overwritten the DASD. However, if “errortext”
appears, FDRERASE cannot be certain when the data is actually written to the
physical DASD, but it continues with the erase operation.
FDR174
function REWROTE VTOC TO UNIT=uuuu [additional text]
Reason: For FDRERASE ERASE operations and FDRINITV INITVTOC operations,
CPYVOLID=YES was specified and FDRERASE or FDRINITV invoked ICKDSF to
rewrite an empty VTOC on the volume (FDRERASE erases it first). “additional text”
can be:
AND REBUILT INDEXED VTOC – A VTOCIX was also allocated and initialize on
the volume.
FAILED CHECK IXSYSPxx – ICKDSF failed, check the IXSYSPxx DD statement
output for error messages.
FAILED IXSYS ERROR – An error occurred dynamically allocating or opening
IXSYSPxx or IXSYSXxx.
CHAPTER
390
– PAGE 390-24 –