Transcript
ES-G130471-1 4 物料号： MAKING CONNECTIONS TV Side Panel HEADPHONE QUICK SETUP GUIDE 条形码定位框 35x10.5mm Stick Spacer × 2 DEBUG 0.5A(MAX) Screw (M5×16) × 10 Power Standby button: Power on / Standby Select sound mode Select picture mode • If the item is not specif ied in the accessories list, it should be provided by customer. Select input sources Source Set the TV sleep timer Picture • Recommend the active shutter 3D glasses model FPS3D07A. Other brands 3D Sound Sleep 3D button 3D glasses may not be supported. 2 Power Switch LAN CAUTION 2 Display the main menu / Back menu display Display TV program and input source information Info Menu Confirm the selection / Display a list of channels saved in TV tuner memory ▲/▼/◄/►: Up/Down/Left/Right Stand Cover Stand Cover Return the previous menu HDMI 4/ARC Base Plate CH VOL Open the HiSmart Hub Base Stand DIGITAL AUDIO OUT Outdoor Antenna DIGITAL AUDIO OUT VHF/UHF Antenna OR Select a channel Speaker ANT OUT Mute and restore sound HEADPHONE Connect Headphone for audio out of the TV. Enter the YouTube app Media player controls: Rewind, Play / Pause, Fast Forward, Previous, Stop and Next Time shift of images on USB devices Start video recorder in DTV mode PVR T.shift Turn Subtitles on or off Subtitle AudioI/II Stick Spacer Stand Cover Stick Spacer Portable Storage Device Connect an optical cable from an external digital audio system (Toslink optical cable is needed). Antenna Cable (75Ω) Secure the stand cover to the base plate vertically with the 4 provided screws (M5 x 16). 4 COMPONENT IN Exit the menu Return Enter the Opera browser 3 L AUDIO R PR • To select the USB device: Press [Source] button, when the list of Input Source appears, press [▲/▼] to select the source [HiMedia], then press [OK] to connect. Or press [HiMedia] to directly enter the HiMedia menu ANT Connect an outdoor VHF/UHF antenna. Mute Base Plate HDMI 2 PB USB Connect a USB 2.0 device port for browsing photos, listening music and watching recorded movies. Check the jacks' for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure. Fast access to your saved favorite channels Adjust the volume HDMI 3 Y Display the Electronic Programming Guide in DTV mode Last Special function buttons Carefully place your TV facedown on a soft, cushioned surface to prevent damage to the TV or scratching to the screen. Take out the stand accessories, Insert the stand cover into the base plate, and secure them with 2 provided screws (M5 x 16). AV IN VIDEO Return to the previous channel 1 TV Bottom Panel Select a channel or input numbers INSTALLING THE STAND PC DC 5V 3D Glasses × 1 USB 1 Batteries: AAA × 2 USB 2 Remote Control Remote sensing window USB 3 Warranty Card Button View ANT HDMI 1 (UHD) Quick Setup Guide press [▲/▼] to select the source [VGA], then press [OK] to connect. AUDIO User Manual VIEWING THE REMOTE CONTROL • To select the VGA: Press [Source] button, when the list of Input Source appears, VGA 3 ACCESSORIES LIST PC IN 1 Connect a VGA cable and an audio cable from the PC. DIGITAL AUDIO OUT HLUD58XT880 HLUD65XT880 VGA & AUDIO Switch between different audio only applicable when the TV program has the feature Mix Text Size Zoom Connect an ethernet cable to access a network or the Internet. LAN Headphone Enter the Teletext mode / Mix Teletext with TV pictures HiMedia (digital multimedia player) button Still Freeze a picture on screen Adjust aspect ratio / Adjust Teletext size ERF-32910 LAN LAN DEBUG Just for factory used, it can't be inserted any equipment. Turning the TV On for the First Time The Installation Guide Menu appears the first time you turn on the TV. It will assist you to specify the Remote Pair, Language Setting, Country Setting, Time Zone Setting (just for Australia area), Use Mode, Network Setting and Channel Search 5 SPECIFICATIONS • Press [POWER] to turn on your TV, it will go straight into Setup Wizard menu • Press [▲/▼/◄/►] buttons to navigate the menu and change the settings. Press [OK] Base Plate Stick 2 spacers onto the positions as illustration. Secure the base stand to the TV with the 4 provided screws (M5 x 16). NOTE Product image is only for reference, actual product may vary in appearance. 1. Slide open the battery cover on the back of the remote control. 2. Install two AAA size (1.5V) batteries. Match the “+” and “-” signs on the batteries to the signs on the battery compartment. 3. Close the battery cover. 1 Gently Push 2 3 SECURING THE INSTALLATION SPACE Make sure that your TV has adequate air circulation. Allow enough space around the TV as shown below. Avoid operating the TV at temperatures below Inadequate air 41°F (5°C). Size with base (mm) 1300×795×345 1460×876×345 Size without base (mm) 1300×754×59 1460×852×65 Country Setting - Select the country where you will operate the TV. Weight with base (kg) 29 44 Time Zone Setting - Select the local time zone according to your region. Weight without base (kg) 36 Use Mode - Select your Mode Setting: Home Mode or Shop Mode. Home Mode is the recommended setting which offers full functionality of the television. 37 Screen Diagonal Size 58 inches 65 inches 12 inches (30cm) 4 inches (10cm) Leave at least this much space around the set. 4 inches (10cm) Language Setting - Select your desired language to be displayed on the menu. Network Setting - Connect an Ethernet cable to access a network or the Internet. TV also Screen Resolution 3840 × 2160 3840 × 2160 features wireless connectivity. For more information, see “Using the Network Menu”. Sound Output (RMS) 10 W + 10 W 10 W + 10 W Channel Search - Search and store all available TV channels automatically. Power Consumption 220 W 250 W HDMI / COMP / AV NOTES Install with stand 4 inches (10cm) HLUD65XT880 Remote Pair - Match your remote control with your TV according to the instructions. CHANGE THE BATTERIES Dispose of your batteries in a designated disposal area. Do not throw the batteries into fire. Do not mix battery types or combine used batteries with new ones. Remove depleted batteries immediately to prevent battery acid from leaking into the battery compartment. If you do not intend to use the remote control for a long time, remove the batteries. The effective range of remote control is suggested in the figure below. Connect an HDMI cable or Comp/AV Adapter from an external A/V equipment. No sound connection is needed for HDMI to HDMI connection. If the device signal resolution does not match the specification table you need to change the setting of device according to the table. Please consult your device user manual for instruction. • To select the HDMI / Component / AV Press [Source] button, when the list of Input Source appears, press [▲/▼] to select the source [HDMI] / [Component] / [AV], then press [OK] to connect. Never install the TV set as follows: BEST (HDMI) Match the Remote Control with TV Inadequate air circulation can lead to overheating of the TV and may cause damage to your TV or cause a fire. If the LED is black, the remote has failed to pair with the TV, repeat the pairing procedure. L AUDIO R PR AV IN COMPONENT IN CAUTION PB NOTE BETTER (COMP) Y Wall 1. Please ensure that your TV is switched on. 2. Aim the remote control at the left-bottom of the TV within 4 inches. 3. Press the [Last] and [EPG] buttons on your remote control simultaneously for at least 3 seconds, the LED light on your remote control will light up three times to indicate successful pairing. VIDEO Air circulation is blocked. Model HLUD58XT880 button to confirm. Power Supply 100V - 240V Colour System PAL NTSC Television System PAL B DVB-T Environmental Conditions Temperature: 5°C - 45°C Humidity: 20% - 80% RH Atmospheric pressure: 86 kPa - 106 kPa Component mode 480I/60Hz, 480P/60Hz, 576I/50Hz, 576P/50Hz, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz, 1080P/50Hz, 1080P/60Hz VGA mode 640×480, 800×600, 1024×768, 1280×1024 60Hz HDMI mode Y Pb Component Pr L R GOOD (AV) Video AV L R 50Hz/60Hz 480I/60Hz, 480P/60Hz, 576I/50Hz, 576P/50Hz, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz, 1080P/50Hz, 1080P/60Hz 640×480, 800×600, 1024×768 3840x2160/24Hz, 3840x2160/25Hz, 3840x2160/30Hz only for UHD port NOTE Video Camera/ Set-top Box/ Satellite Receiver Sources of UHD (4K) content must be connected to the HDMI-1 input. For the moment digital television channels do not deliver UHD content. Features, appearance and specifications are subject to change without notice. you refer to the Trouble Shooting tips in the User Manual. Dial: 1800 447 367 (Toll Free) http://www.hisense.com.au
