Download Installation Manual

 INST
TALL
LATIO
ON MA
ANUAL
L
AV1455DN-S
AV2455DN-S
AV2456DN-S
AV3455DN-S
AV3456DN-S
AV5455DN-S
Arecont Vision MicroDome™ Installation Manual MicroDome™ Surface Mount Installation Contents Package Contents ....................................................................................................................................................... 3 Warranty Information ................................................................................................................................................ 3 Installation Overview ................................................................................................................................................. 4 Installation ................................................................................................................................................................. 5 Focusing the Camera .................................................................................................................................................. 7 Changing the Lens ...................................................................................................................................................... 8 Focusing Alternate Lenses ......................................................................................................................................... 8 Digital Input and Output ............................................................................................................................................ 9 LED Indicators .......................................................................................................................................................... 10 Support .................................................................................................................................................................... 11 Camera Discovery, Setup, and Configuration .......................................................................................................... 12 Wall Mount Accessory ............................................................................................................................................. 13 Pendant Mount Accessory ....................................................................................................................................... 14 Mount Template: MicroDome Camera .................................................................................................................... 15 Mount Template: MicroDome Wall Mount ............................................................................................................. 16 Mount Template: MicroDome Pendant Mount ....................................................................................................... 17 Page | 2
[email protected]
Arecont Vision MicroDome™ Installation Manual Package Contents Item MegaPixel Camera Mounting Kit Arecont Vision CD Description MicroDome™ Ceiling template 6x Mounting Screws 3/8” NPT Male to 1/2” NPT Female Adapter Network Patch Cable 3x Security Torx Dome Cover Fasteners Manual, Warranty, Installation Software Warranty Information 3 Year Limited Warranty ARECONT VISION warrants to Purchaser (and only Purchaser) (the “Limited Warranty”), that: (a) each Product shall be free
from material defects in material and workmanship for a period of thirty-six (36) months from the date of shipment (the
“Warranty Period”); (b) during the Warranty Period, the Products will materially conform with the specification in the applicable
documentation; (c) all licensed programs accompanying the Product (the “Licensed Programs”) will materially conform with
applicable specifications. Notwithstanding the preceding provisions, ARECONT VISION shall have no obligation or
responsibility with respect to any Product that (i) has been modified or altered without ARECONT VISION’s written
authorization; (ii) has not been used in accordance with applicable documentation; (iii) has been subjected to unusual stress,
neglect, misuse, abuse, improper storage, testing or connection; or unauthorized repair; or (iv) is no longer covered under the
Warranty Period. ARECONT VISION MAKE NO WARRANTIES OR CONDITIONS, EXPRESS, IMPLIED, STATUTORY OR
OTHERWISE, OTHER THAN THE EXPRESS LIMITED WARRANTIES MADE BY ARECONT VISION ABOVE, AND
ARECONT VISION HEREBY SPECIFICALLY DISCLAIMS ALL OTHER EXPRESS, STATUTORY AND IMPLIED
WARRANTIES AND CONDITIONS, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, NON-INFRINGEMENT AND THE IMPLIED CONDITION OF SATISFACTORY QUALITY. ALL
LICENSED PROGRAMS ARE LICENSED ON AN “AS IS” BASIS WITHOUT WARRANTY. ARECONT VISION DOES NOT
WARRANT THAT (I) THE OPERATION OF THE PRODUCTS OR PARTS WILL BE UNINTERRUPTED OR ERROR FREE;
(II) THE PRODUCTS OR PARTS AND DOCUMENTATION WILL MEET THE END USERS’ REQUIREMENTS; (III) THE
PRODUCTS OR PARTS WILL OPERATE IN COMBINATIONS AND CONFIGURATIONS SELECTED BY THE END USER;
OTHER THAN COMBINATIONS AND CONFIGURATIONS WITH PARTS OR OTHER PRODUCTS AUTHORIZED BY
ARECONT VISION OR (IV) THAT ALL LICENSED PROGRAM ERRORS WILL BE CORRECTED.
For RMA and Advance Replacement information visit ArecontVision.com Page | 3
[email protected]
Arecont Vision MicroDome™ Installation Manual Installation Overview Ceiling
Gasket NPT Port Camera Housing Mounting Screws Captive Fasteners (Hand Tighten Only) Page | 4
[email protected]
Gasket
Dome Cover
Arecontt Vision MicroDome™
™ Installation Manual Installation ww.arecontvision.com/ and check to ennsure your caamera has thee most curren
nt firmware.
1. Visit http://ww
2. Fo
or installation
ns in harsh en
nvironments iit is recommeended to use all six mountting screws su
upplied with yo
our camera to
o create the b
best seal posssible betweenn your camerra and the mo
ounting surfacce using the su
upplied gaske
et. 3. If using the NP
PT port alwayss use Teflon ttape around tthreads to en
nsure proper ssealing. ork cable checck that the inddicator LED’ss are indicatin
ng the desired
d conditions 4. After plugging in the netwo
(ssee LED Indicaator table). 5. Use Arecont Vision softwarre AV100 or A
AV200 locatedd on the CD o
or available fo
or download aat our website (www
w
w.arecontvisio
on.com) for caamera discoveery and setup
p (see Instrucction Manual located on CD or available
e on our website). n and tilt to ob
btain the desired field of vview (see Focusing Instructtions). 6. Adjust the pan
7. Le
ens may be fu
urther secure
ed by tightening th
he lens lock sccrew using Ph
hillips head sccrewdriver. 8. In
nstall the Dom
me Cover by aaligning the caaptive fastene
ers with the m
mating th
hreaded holes on the came
era housing. 9. When mountin
W
ng the Dome Cover to the Camera Housing ensurre that the gasket is properly seating annd not fo
olded. Failure
e to do so maay result in waater and dustt ingress. 10. When mountin
W
ng the Dome Cover to the Camera Hou sing do not over torqu
ue the three ccaptive fasten
ners as this w ill cause th
he threads to strip. Only h
hand tighten tthese screws.. Tech Tip Best Practtice Tips  When mountin
W
ng to vertical surface it is b
best to use thhe Wall Mount Accesso
M
ory (MCD‐WM
MT) which inccludes a juncttion box.  Fo
or outdoor usse it is alwayss best to prop
perly seal the product ussing caulk aro
ound the edge
es to preventt water ingresss from mounting to p
m
orous or uneven surfaces..  Use Teflon tap
pe on threade
ed interfaces.
 Use all 6 supplied mountingg screws for b
best seal wheen mounting o
outdoors. Page | 5
[email protected]
Arecont Vision MicroDome™ Installation Manual Page | 6
[email protected]
Arecontt Vision MicroDome™
™ Installation Manual Focusing the C
Camera O
ew of the cam
mera from you
ur web browsser or the AV Software pro
ovided (AV100
0 or AV200).
1. Open a live vie
2. Lo
oosen the len
ns lock screw using a phillip
ps head screw
wdriver (if necessary). Only do so if len
ns seems very
y tight when turrning. Lock sccrew should enough to pro
ovide some be tightened e
frriction againstt the lens to aavoid fo
ocusing problems. 3. Manually rotat
M
te the lens to
o adjust the fo
ocus until the desired imagge is obtained. 4. Fo
or some lense
es a focus shift will occur o
once the bub ble is in placee. Hold the bubble up to tthe lens when
n fo
ocusing to acccount for the focus shift orr see the “Foccusing Alternate Lenses” ssection below
w for further in
nstruction. 5. Retighten the lock screw if necessary. 6. In
nstall the Dom
me Cover by aaligning the caaptive fasten ers with the m
mating threaded holes on the camera housing. 7. When mountin
W
ng the Dome Cover to the Camera Hou sing ensure that the gaskeet is properly seating and not folded. Faailure to do so
o may result in water and ddust ngress. in
8. When mountin
W
ng the Dome Cover to the Camera Hou sing do not over torqu
ue the three ccaptive fasten
ners as this w ill cause th
he threads to strip. Only h
hand tighten tthese screws.. Tech Tip Tech Tip Page | 7
[email protected]
Arecontt Vision MicroDome™
™ Installation Manual Changging the Lens he captive fassteners. 1. Remove the Dome Cover byy loosening th
2. Lo
oosen the len
ns lock screw using a phillip
ps head screw
wdriver (if necessary). Only do so if len
ns seems very
y tight when turrning. M
crew the lens,, this may takke 3. Manually unsc
se
everal second
ds. 4. Replace lens. 5. Retighten the lock screw if necessary. 6. Reinstall Dome
e Cover per in
nstructions outlined above
e. Focusing Alternate Le
enses mm, 8mm, 12m
mm or 16mm
m lens optionss you will enco
us shift when using the When foccusing the 6m
ounter a focu
bubble. TTo account for this follow tthese steps:
1.
2.
3.
4.
Tech Tip Fo
ocus the camera without tthe bubble. Rotate the lens per the chart below. The
e rotation wi ll account forr most of the focus shift. Put cover with
h bubble on. YYou should be close to beiing focused.
Remove cover and rotate a couple degre
ees at a time in either direection until yo
ou gain the deesired image.. Lens MPM16.0 MPM12.0 MP
PM8.0 MP
PM6.0 16mm 12mm 8mm 6mm Rotattion <3/4 CCW
W 1/4 CCW
>1/8 CCW
W 1/8 CCW
250° 90° 60° 45° m lens you will focus the le
ens without tthe bubble un
ntil you get th
he desired im
mage. Rotate Example: Using a 16mm
the lens aalmost ¾ of a turn (250°). Put the bubb
ble on and vieew the image.. It should bee almost in focus. Remove
e the bubble and rotate a degree or ttwo in one dirrection and v iew the imagge with the bu
ubble on. Depending on the image
e you may nee
ed to adjust in the oppositte direction oor continue in
n the same dirrection until tthe desired image is o
obtained. Page | 8
[email protected]
Arecont Vision MicroDome™ Installation Manual Digital Input and Output Use 4 position connector inside camera housing to interface with Digital I/O. DIGITAL I/O BLACK IN ‐ WHITE IN + YELLOW OUT ‐ ORANGE OUT + Electrical Characteristics Input Voltage (V) (Measured between + and – terminals) Output Current (mA) (Measured between + and – terminals) Applied Voltage Range : 0‐80V MIN MAX ON 2.9 6.3 OFF 0 1.3 ON ‐ 50 OFF ‐ 0.1 NOTE: Both the input and the output are electrically isolated from the rest of the camera’s electrical circuitry via general‐purpose photo couplers. The input is additionally protected with a serial 250 Ohm resistor and a debouncing circuit. Duration of any input signal should be at least 5ms to comply with the requirements of the debouncing circuit. Page | 9
[email protected]
Arecont Vision MicroDome™ Installation Manual LED Indicators LED Yellow Status
Flashing
Green Solid
None
Flashing
Solid
None
Page | 10
[email protected]
Description Link has been established. Normal Operation.
No connection.
Camera has been accessed. Normal operation. N/A
No Connection.
Arecont Vision MicroDome™ Installation Manual Support 1. Arecont Vision FAQ Page Located at ArecontVision.com 2. Check the following before you call:  Restore camera to factory default with AV100, AV200 or the camera webpage.  Upgrade to the latest firmware by visiting ArecontVision.com.  Isolate the camera on a dedicated network and test with AV100 or AV200.  Swap the “troubled” camera with a known good camera to see if the problem follows the camera or stays at the location. 3. Contact Arecont Vision Technical Support one of three ways: 1. Online Portal : Support.ArecontVision.com 2. Phone : 1.818.937.0700 (option #1) 3. Email : [email protected] Page | 11
[email protected]
Arecont Vision MicroDome™ Installation Manual Camera Discovery, Setup, and Configuration For camera discovery and setup please use Arecont Vision software AV200 which you can find on the CD included with your camera or at: http://www.arecontvision.com/softwares.php The user manual for the AV200 software is included on the CD and is also located on our website. To configure the camera use either the AV200 software or the web interface utility. The web interface can be accessed by typing the camera IP address into your web browser or by clicking on the web interface button in AV200. The user manual for our web interface is included on the CD and is also located on our website. Page | 12
[email protected]
Arecontt Vision MicroDome™
™ Installation Manual Wall M
Mount A
Accessorry (MCD‐‐WMT)
Gaskeet Allignment features must be aliggned for prroper instaallation. Installaation Nottes: 1.
2.
3.
4.
Page | 13
Always en
A
nsure gaskkets are p
properly sseated. Use Teflon
U
n tape on
n threaded interfacces. 3/8” male
3
e to 1/2” ffemale NPT adapteer includeed. Mount ho
M
oles from camera h
housing to
o flange aare not syymmetriccal. Alignment
A
t featuress indicate
ed must b
be properrly lined u
up for mo
ount hole alignment
a
t. suppo
ort@arecontv
vision.com
Arecontt Vision MicroDome™
™ Installation Manual Pendaant Mou
unt Accessory (M
MCD‐CM
MT) Installation No
otes: 1. Always eensure gaaskets aree properlyy seated. 2. Use Teflon tape o
on thread
ded interfacees. 3. 3/8” maale to 1/2”” female NPT d. adapter included
4. Mount h
holes from
m cameraa housing to flangee are not symmettrical. Aliggnment featuress indicated must be properlyy lined up
p for mount hole aliggnment. Gaasket
Alignmentt features must be aligned for proper insstallation. Page | 14
suppo
ort@arecontv
vision.com
Arecont Vision MicroDome™ Installation Manual Mount Template: MicroDome Camera Page | 15
[email protected]
Arecont Vision MicroDome™ Installation Manual Mount Template: MicroDome Wall Mount Page | 16
[email protected]
Arecont Vision MicroDome™ Installation Manual Mount Template: MicroDome Pendant Mount Page | 17
[email protected]
Arecont Vision MicroDome™ Installation Manual Contact Arecont Vision Technical Support one of three ways: Online Portal : Support.ArecontVision.com Phone : 1.818.937.0700 (option #1) Email : [email protected] Page | 18
[email protected]