1
Download Hitachi Command Control Interface
Transcript
raidcom add snapshot Error message Executing Error code /Async SSB1 SSB2 CMDRJE Executing 2E20 000B The command ends abnormally because an unmounted volume is specified as the S-VOL of a Thin Image or Copyon-Write Snapshot pair. CMDRJE Executing 2E20 000C The command ends abnormally because the blocked volume is specified as the S-VOL of a Thin Image or Copyon-Write Snapshot pair. CMDRJE Executing 2E20 000D The command ends abnormally because the volume in formatting operation is specified as the S-VOL of a Thin Image or Copy-on-Write Snapshot pair. CMDRJE Executing 2E21 8107 The command ends abnormally because the shared memory (FC, TPF, or Extension1) is not expanded for necessary capacity. CMDRJE Executing 2E21 8108 The command ends abnormally because the shared memory (SS1 or more) is not expanded for necessary capacity. CMDRJE Executing 2E21 8109 A Thin Image or Copy-on-Write Snapshot pair cannot be created due to one of the following reasons: Description • The shared memory is not expanded for necessary capacity. • It is in the initializing process. CMDRJE Executing 2E21 9010 The program product is not installed. CMDRJE Executing 2E30 000C The specified LDEV is used as a quorum disk. CMDRJE Executing 2E30 0076 A pair cannot be created because the volume is already used in the S-VOL of a Thin Image or Copy-on-Write Snapshot pair is specified as the P-VOL. CMDRJE Executing 2E30 0077 A pair cannot be created because the volume is already used in the P-VOL of a Thin Image or Copy-on-Write Snapshot pair is specified as the S-VOL. CMDRJE Executing 2E30 0078 A pair cannot be created because the volume is already used in the S-VOL of a Thin Image or Copy-on-Write Snapshot pair is specified as the S-VOL. CMDRJE Executing 2E30 007A The command ends abnormally because the volume other than OPEN-V is specified as the P-VOL of a Thin Image or Copy-on-Write Snapshot pair. CMDRJE Executing 2E30 007B A pair cannot be created because the volume that is set the command device is specified as the P-VOL of a Thin Image or Copy-on-Write Snapshot pair. CMDRJE Executing 2E30 007C The command ends abnormally because the volume other than OPEN-V is specified as the S-VOL of a Thin Image or Copy-on-Write Snapshot pair. CMDRJE Executing 2E30 007D A pair cannot be created because the volume that is set the command device is specified as the S-VOL of a Thin Image or Copy-on-Write Snapshot pair. CMDRJE Executing 2E30 007E 9–66 The command ends abnormally because the volume that has no path definition is specified as the P-VOL of a Thin Image or Copy-on-Write Snapshot pair. Troubleshooting Hitachi Command Control Interface User and Reference Guide
