Download Untitled - Customs
Transcript
6 327 SECTION 6 WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS POWER COMMANDER V •Full fuel and ignition timing control for each cylinder with a new smaller enclosure •The REV Xtend feature increases stock rev limiter •Switch betwen two maps “on the fly” and maps can be adjusted on a “per gear” basis (one map per cylinder, per gear if required) •Adjustment of fuel and timing based on engine temp is provided by the “Cold Start” feature •Will power up with USB cable only for programming NOTE: Not legal for sale or use on pollution controlled vehicles. PART # 1020-0842 1020-0839 1020-0840 DESCRIPTION For 09 FXST/FLST For 09 XL 883 For 09 XL 1200 SUG. RETAIL $369.95 369.95 369.95 PART # 1020-0841 1020-0843 1020-0844 DESCRIPTION For 09 FLHT, FLHX, FLHR, FLTR For 09 Dyna Glide For 09 V-Rod SUG. RETAIL $379.95 369.95 369.95 1020-0839 EXHAUST FUEL/AIR SYSTEMS 66116002 ENGINE TRANSMISSION & DRIVELINE 53409060 GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 328 DS-189152 POWER COMMANDER III USB •USB (Universal Serial Bus) port provides an instant, problem-free 1020-0014 way to connect your Power Commander to a computer •Provides precise information for fine-tuning a fuel-injected 43811130 motorcycle when changing an air filter, installing a new exhaust system or doing additional engine performance modifications •Each unit includes a built-in microprocessor and a specific map designed to improve engine performance over stock; Dynojet continuously maps new calibrations for each bike, which are available for downloading at their website (www.powercommander.com) •If you do not have a computer, you can change the settings with three touch buttons on the faceplate •OEM-style wiring connectors with improved harness protection are supplied; no wiring modifications required •Includes easy-to-follow instructions •Direct injector control technology manages the fuel curve on models that do not have the sensors to monitor fuel adjustment •Features an expansion port for future add-on modules from Dynojet •Software is compatible with Windows 98se/ME/2000/XP; opens all maps with .djm extension •USB special cable and 9V battery power adapter are included •Made in the U.S.A. •Adapters allow you to activate a Power Commander for changing or altering maps while disconnected from the bike •Professional adapter is ideal for service/parts department applications, consumer adapter is for limited use NOTE: Not legal for sale or use on pollution controlled vehicles. POWER COMMANDER III USB PART # DESCRIPTION 1020-0533 For 08 Twin Cam Touring models 1020-0286 For 07 Twin Cam Touring models (w/ O2 eliminators) 1020-0001 For 02-06 Twin Cam Touring models 1020-0002 For 99-01 Twin Cam Touring models 1020-0005 For 97-98 Evolution Touring models 1020-0287 For 07-08 FXST/FLST (w/ O2 eliminators) 1020-0003 For 01-06 FXST/FLST SUG. RETAIL $379.95 369.95 359.95 359.95 359.95 369.95 359.95 PART # 1020-0534 1020-0291 1020-0004 1020-0288 1020-0218 1020-0006 1020-0290 1020-0289 DESCRIPTION For 08 V-Rod™ For 07 V-Rod™ For 02-06 V-Rod™ For 07-08 Dyna Glide (w/ O2 eliminators) For 06 Dyna Glide w/ O2 eliminators For 04-05 Dyna Glide For 07-08 XL883 (w/ O2 eliminators) For 07-08 XL1200 (w/ O2 eliminators) SUG. RETAIL $369.95 369.95 359.95 369.95 369.95 359.95 369.95 369.95 POWER ADAPTERS/ CABLE PART # 66116002 53409060 DS-189152 DESCRIPTION Repl. USB consumer 9V battery power adapter USB dual volt 110V/220V professional power adapter Serial port 9V adaptor (not for USB P.C.’s) SUG. RETAIL $14.95 PART # 43811130 1020-0014 DESCRIPTION International plug adapter kit Repl. USB special cable SUG. RETAIL $12.95 39.95 69.95 11.95 PALM ADAPTER •In order to send maps from Palm Pilots to a Power Commander, a special adapter from Dynojet is required •Adapter has been modified for use with the Palm Cradle or a Palm Hot Sync serial cable •Dynojet Palm Software Map List is now available for download; Version 1 is freeware •Maps can be sent to a Palm device from the Control Center software; the number of maps stored is limited only by your Palm memory PART # DESCRIPTION SUG. RETAIL •Maps can also be sent from the Palm DS-189146 Palm adapter $9.95 to any PCII, PCIII and PCIIIr unit NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturer’s information. All part numbers in BOLD MAGENTA are new for 2009. SECTION WINDSHIELDS CALIFORNIA A.R.B. APPROVED POWER COMMANDER III USB-EX •Provides virtually the same tuning functionality as the original Power Commander III USB •Compatible with Tuning Link software •Creates full fuel adjustability, fuel and ignition mapping and custom maps •A built-in ignition module and ignition timing changes of up to +/- 10° are also incorporated •Rev X-tend feature allows you to increase the stock rev limiter to 6200 rpm •Maps created for Power Commander III USB can be loaded and will automatically be converted to the proper format •Will work with any exhaust system •Increases torque and horsepower PART # DESCRIPTION POWER COMMANDER USB-EX 1020-0751 For 08 Twin Cam Touring models 1020-0366 For 07 Twin Cam Touring models 1020-0372 For 02-06 Twin Cam Touring models 1020-0375 For 99-01 Twin Cam Touring models 1020-0378 For 97-98 Evolution models 1020-0367 For 07-08 FXST/FLST 1020-0373 For 01-06 FXST/FLST 1020-0752 For 08 V-Rod 1020-0371 For 07 V-Rod 1020-0376 For 02-06 V-Rod 1020-0368 For 07-08 Dyna Glide SUG. RETAIL $369.95 369.95 369.95 369.95 369.95 369.95 369.95 369.95 369.95 369.95 369.95 PART # DESCRIPTION POWER COMMANDER USB-EX (CONT) 1020-0374 For 06 Dyna Glide (w/ O2 eliminators) 1020-0377 For 04-05 Dyna Glide 1020-0370 For 07-08 XL883 1020-0369 For 07-08 XL1200 POWER ADAPTERS/CABLE 66116002 Repl. USB consumer 9V battery power adapter 53409060 USB dual volt 110V/220V professional power adapter 43811130 International plug adapter kit DS-189152 Serial 9V consumer battery power adapter 1020-0014 Repl. USB special cable TOURING LUGGAGE SUG. RETAIL $369.95 369.95 369.95 369.95 14.95 69.95 12.95 11.95 39.95 •Connects to any Power Commander USB via a “quick-disconnect” cable •Designed to remain on the bike at all times, even in harsh weather •Displays all available data from the Power Commander when connected •Stores and switches between multiple maps in the on-board memory; maps can be sent to the Power Commander “on the fly” •Adjust maps using the controls on the display screen •Logs data for later analysis •Increase data storage for maps and logging by adding an SD Memory Without multi function hub With multi function hub card; sold separately •Can be easily removed from the bike to be programmed with a desktop computer PART # DESCRIPTION SUG. RETAIL •USB programmable and upgradable 1020-0325 LCD display for Power Commander $299.95 •Uses an active matrix TFT LCD 240 x 320 16-bit screen EXHAUST FUEL/AIR SYSTEMS TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL 1020-0326 •The Multi-Function Hub allows access to advanced expansion features of the Power Commander USB •Compatible with the LCD display, but the display is not required •Four separate functions can be accessed with the Multi-Function Hub •The Map Selection Switch (7/8” bar mount) allows the rider to switch between two different maps in the Power Commander. This allows a map for economy and a separate map for performance •The Gear Position/Speed function allows fuel and timing adjustments to be made depending on the gear selected and the position of the throttle, up to +/-50% fuel and +/-10 degrees of timing •Pressure input allows the fuel to be increased along with the boost level on turbocharged installations. The change of boost level does not require a re-mapping of the Power Commander •Relay outputs allow up to two warning lights or relays to be triggered independently to activate items such as shift lights, nitrous systems, or air shifter. The trigger can be by throttle percent, rpm, or both •Comes complete with installation instructions, wiring diagrams and CD with the required software updates PART # 1020-0326 1020-0327 SEATS & SISSY BARS ENGINE LCD DISPLAY ACCESSORY FOR POWER COMMANDER III USB/USB-EX MULTI-FUNCTION HUB ACCESSORY FOR POWER COMMANDER USB/USB-EX 6 DESCRIPTION Multi-Function Hub and wiring harness for Map Selection Switch only Multi-Function Hub and wiring harness for Map Selection, Gear Position, Speed sensor, Pressure Input and two relay outputs LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1020-0327 CABLES BRAKES SUG. RETAIL $159.95 189.95 TANKS & OIL FILTERS DASHES & GAUGES WIDE BAND COMMANDER AIR/FUEL RATIO MONITOR •Unlike current narrow band air/fuel ratio systems, Dynojet’s Wide Band Commander module uses a Bosch 5-wire LSU 4 wide band sensor that can read ratios from 10.0:1 to 18.0:1 •When installed, the Wide Band Commander provides a 21/16” black- or white-faced 270° sweep electric air/fuel ratio gauge with programmable warning light and mounting hardware, plus data recording that can be 1020-0085 1020-0086 retrieved and analyzed with the supplied software package •Software package requires Windows® SE/ME/2000/XP computer •Onboard memory allows data to be logged, without using a laptop/PC, for download at a later time •Log file data can be played back in the software, or exported as text •Modular programmable for nitrous, water injection, timing retard and many other engine management options •Single wire tach hookup; no tach adapter required •Includes all required sensors, cables, software, 9V power adaptor and all installation materials; the most complete kit on the market •Requires drilling hole in exhaust system to mount oxygen sensor •18mm x 1.5mm oxygen sensor weld boss and plug included; when not powered, PART # DESCRIPTION sensor must be removed and plug attached in mounting hole in exhaust system 1020-0085 Black w/ silver bezel gauge •Dynolink compatible – allows Wide Band Commander to communicate with WinPEP7 1020-0086 White w/ black bezel gauge •Exclusive website for software updates and technical tips: www.widebandcommander.com FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS SUG. RETAIL $529.95 529.95 NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturer’s information. All part numbers in BOLD MAGENTA are new for 2009. HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 329 SECTION 6 WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE 1020-0538 FUELPAK •Available in original version which is not legal for sale in CA or new California A.R.B approved version with all the same features as the original •Throttle position sensor-based system simplifies the process of fuel-injection tuning •Enables you to fine-tune the fuel mixture throughout the entire rpm range with the touch of a button •Increases power and improves throttle response •Very user friendly; plugs into the existing harness on the bike •No computer or software is required, simply punch in the values supplied with the Fuelpak •Values supplied are for use with Vance & Hines exhaust systems •Fuelpak will also work with other exhaust systems (contact V&H tech support for tuning information) •Includes all necessary mounting hardware NOTE: Not legal for sale or use on pollution controlled vehicles. TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS NOTE: Requires the use of a high-performance air filter. PART # DESCRIPTION ORIGINAL FUELPAK FOR 49 STATE USE 1020-0750 For 08 FXCW/C, 08 FLSTSB 1020-0360 For 01-06 FXST, 01-08 FLST (except 07-08 FLSTF, 08 FLSTSB) 1020-0362 For 04-08 Dyna and 02-08 V-Rod models 1020-0568 08 FLHT, FLHR, FLHX, FLTR models 1020-0361 For 02-07 FLHT, FLHR, FLHX, FLTR models 1020-0538 For 07-08 XL, 07-08 FXST/B/C, SSE, 07-08 FLSTF SUG. RETAIL PART # DESCRIPTION CALIFORNIA A.R.B. APPROVED 1020-0823 For 08 FXCW/C, 08 FLSTSB 1020-0818 For 01-06 FXST, 01-08 FLST (except 07-08 FLSTF, 08 FLSTSB) 1020-0820 For 04-08 Dyna and 02-08 V-Rod models 1020-0822 08 FLHT, FLHR, FLHX, FLTR models 1020-0819 For 02-07 FLHT, FLHR, FLHX, FLTR models 1020-0821 For 07-08 XL, 07-08 FXST/B/C, SSE, 07-08 FLSTF SUG. RETAIL $279.95 1020-0192 FI CONTROLLER •Plug-in module offers three user-selectable base fuel curves designed to improve engine operation on fuel-injected models •Can be configured to suit a wide variety of modifications •Adjustments are made via three potentiometers that adjust the fuel curve in the proper ranges for the application •Fuel mixture can be enriched or leaned as required •Uses factory connectors for easy installation – there is no PC required for tuning or adjusting the fuel curves •No modifications to the stock ECU •Removing the FI controller returns vehicle to factory configuration NOTE: Not legal for sale or use on pollution controlled vehicles. 279.95 279.95 279.95 279.95 279.95 $279.95 279.95 279.95 279.95 279.95 279.95 PART # 1020-0190 1020-0191 1020-0192 1020-0539 1020-0503 1020-0193 1020-0540 1020-0504 1020-0541 1020-0505 1020-0194 1020-0542 1020-0543 DESCRIPTION For 97-98 FLHT, FLHR, FLTR models For 99-01 FLHT, FLHR, FLTR models For 02-05 FLHT, FLHR, FLTR models For 07 FLHT, FLHR, FLHX, FLTR models For 06 FLHT, FLHR, FLHX, FLTR models For 01-05 FXST/FLST, 04-05 Dyna Glide For 07 FXST/FLST For 06 FXST/FLST For 07 Dyna For 06 Dyna For 02-07 V-Rod models For 07 XL 883 For 07 XL 1200 SUG. RETAIL $248.95 248.95 248.95 259.95 248.95 248.95 259.95 248.95 259.95 258.95 248.95 259.95 259.95 CABLES BRAKES 1020-0828 TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 330 BIG SHOT™ ADJUSTABLE FUEL INJECTION TUNER 1020-0309 •A load-based fuel injection module; does not require splicing or modifications to motorcycle during installation •Comes pre-loaded with base maps for different models which can then be fine tuned to individual riding style and bike •Laptops and dyno machines are not required during tuning to maximize performance •Utilizes the latest in load-based technology in fuel injection performance •Detects the exact amount of load on the engine at any RPM and any road speed; delivers the perfect amount of fuel to the engine for optimum performance •A superior design over fuel injection modules that work off throttle position NOTE: Not for PART # 1020-0310 1020-0770 1020-0531 1020-0309 1020-0311 1020-0771 1020-0312 1020-0530 sale in California. DESCRIPTION For 06 FXST/FLST/FLT models For 08-09 FLT models For 07 Big Twin and 08 FXST/FLST/FXD models For 95-05 Big Twin models For 06 Dyna models For 08 V-Rod models For 02-07 V-Rod models For 07-08 XL models SUG. RETAIL $251.95 300.95 300.95 251.95 300.95 300.95 251.95 300.95 “CHEAP SHOT” FUEL TUNER •An economical solution to add needed fuel after installing exhaust and air cleaner performance upgrades •Simple splice-in design saves money by eliminating costly plug-and-play connectors •Load-based technology senses load on the engine in any riding situation to provide optimal fuel to the engine •Adjusts like a carburetor •Installation instructions included NOTE: Not for sale in California. PART # 1020-0829 1020-0828 1020-0831 1020-0830 DESCRIPTION For 06-09 Dyna, 07-09 Big Twin For 95-06 Big Twin (except 06 Dyna) For 08 V-Rod For 02-07 V-Rod SUG. RETAIL $151.95 151.95 151.95 151.95 NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturer’s information. All part numbers in BOLD MAGENTA are new for 2009. SECTION 6 WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FI2000R PLUG-IN FUEL PROCESSOR •Proven Fi2000R comes with leads that snap directly into the bike’s injector bodies •Standard open-loop design for 06 Dyna and all 07-08 models can use exhaust systems that do or do not have O2 sensor bungs •More advanced tuning for modified bikes •Think of third tuning pot as an electronic main jet while thinking of the entire Fi2000R as a digital jet kit •Full range of fuel adjustment (0-10 settings) across all rpm ranges •Three easy identifiable lights: green – Fi2000 is adding more fuel to the air/fuel ratio approx. 14:1; Green and yellow lights – these lights will be on in unison when throttle is open more quickly and air/fuel mixture is approx. 12.5:1; Red – light comes on and stays on as long as the Fi200 follows the fuel curve while adjusting to approx. 12.8:1 air/fuel ratio, which is where the engine will produce its best full-throttle power •Step-by-step instructions •Improves rideability by smoothing out the powerband and giving the bike more throttle response •Corrects lean air/fuel mixture problems; eliminates overheating, backfiring on deceleration, hesitation on acceleration or an uneven cruising rpm •Waterproof circuit board •No fuel map adjustments or computer downloads required NOTE: Standard models not legal for operation on public highways in the state of California. PART # STANDARD 1020-0301 1020-0544 1020-0206 1020-0095 1020-0561 1020-0304 1020-0204 1020-0093 1020-0306 DESCRIPTION For For For For For For For For For SUG. RETAIL 07-08 FXST/FLST and 06-08 Dyna Glide 08-09 FXCW/FXCWC 06 FXST/FLST 01-05 FXST/FLST and 04-05 Dyna Glide 08-09 FLHT, FLHR, FLTR, FLHX 07 FLHT, FLHR, FLTR, FLHX 06 FLHT, FLHR, FLTR, FLHX 95-05 FLHT, FLHR, FLTR, FLHX 07-09 XL $249.95 249.95 249.95 249.95 249.95 249.95 249.95 249.95 249.95 PART # DESCRIPTION STANDARD (CONT) 1020-0626 For 08-09 V-Rod 1020-0094 For 02-07 V-Rod 1020-0341 Repl. O2 Sensor Eliminator kit CALIFORNIA 1020-0549 For 06 FXST/FLST 1020-0550 For 01-05 FXST/FLST and 04-05 Dyna Glide 1020-0548 For 06 FLHT, FLHR, FLTR, FLHX 1020-0546 For 95-05 FLHT, FLHR, FLTR, FLHX 1020-0547 For 02-07 V-Rod SUG. RETAIL $249.95 249.95 35.95 249.95 249.95 249.95 249.95 249.95 FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES FI2000R O2 FUEL PROCESSOR TANKS & OIL FILTERS •The Fi2000 O2 digital fuel processor is designed to work with all H-D exhaust systems (stock or aftermarket) equipped with oxygen sensors in place (closed-loop design) •Works much like a carburetor jet kit with adjustments similar to the air-mixture screw, the needle and clip positions and the main jet •The Fi2000 increases horsepower and torque by optimizing stock lean air/ fuel mixtures (helps cool the engine temps as well) •Quick and simple installation with plug-and-ride technology with OEM-style connectors •No confusing computer downloads to install •No expensive dyno testing required •Pre-configured from the factory for your make and model, but easy to adjust should your specific application need it •Improves overall rideability •Virtually eliminates backfiring on deceleration DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES NOTE: Standard models not legal for operation on public highways in the state of California. STD. PART # STANDARD 1020-0303 1020-0545 1020-0302 1020-0314 1020-0562 1020-0305 1020-0307 1020-0628 DESCRIPTION For For For For For For For For SUG. RETAIL 07-09 FXST/FLST 08-09 FXCW/FXCWC 07-09 Dyna Glide 06 Dyna Glide 08-09 FLHT, FLHR, FLTR, FLHX 07 FLHT, FLHR, FLTR, FLHX 07-09 XL 08-09 VSCR V-Rod $279.95 279.95 279.95 279.95 279.95 279.95 279.95 279.95 STD. PART # CALIFORNIA 1020-0553 1020-0558 1020-0552 1020-0556 1020-0564 1020-0555 1020-0560 1020-0629 DESCRIPTION For For For For For For For For 07-09 FXST/FLST 08-09 FXCW/FXCWC 07-09 Dyna Glide 06 Dyna Glide 08 FLHT, FLHR, FLTR, FLHX 07 FLHT, FLHR, FLTR, FLHX 07-09 XL 08-09 VSCRA/B/R V-Rod SUG. RETAIL $279.95 279.95 279.95 279.95 279.95 279.95 279.95 279.95 NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturer’s information. All part numbers in BOLD MAGENTA are new for 2009. TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 331 SECTION 6 WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS TCFI3 AUTO-TUNE FUELINJECTION SYSTEM •Simultaneously auto-tunes fuel curves for front and rear cylinders under actual riding conditions with new WEGO IIID dual-channel wideband oxygen sensor interface •Fully programmable plug-in replacement for Delphi® controller •Robust alpha-N (throttle position and rpm-based) fuel control eliminates problems with long duration/high overlap camshafts •Full support for SAE J1850 data bus used on 04-08 models (except 08 touring models with electronic throttle control) for communications between the engine control 1021-0006 module, instrument cluster, turn signal/security module and diagnostic scan tools •Support for sixth gear indicator on 07-08 models •TCFI also has built-in data logging that stores data for the last 60 minutes of operation at 10 samples per second •PC communications is by means of a USB interface that plugs directly into the existing H-D diagnostic connector •Powerful Windows software for custom programming and extended data logging and diagnostics •User programs a table with the desired air/fuel ratio and the system does the rest – no dyno tuning required •Idle air control including idle rpm and cold start characteristics are fully programmable, which facilitates use of aftermarket throttle bodies with higher airflow •Kit includes TCFI fuel-injection controller, WEGO IIID dual-channel wide-band oxygen sensor interface, two Bosch LSU 4.2 wide-band sensors for front and rear cylinders, USB interface for PC Link, software and two 18 x 1.5mm weld nuts for exhaust pipe NOTE: Not legal for sale or use on pollution-controlled vehicles. PART # DESCRIPTION TFCI3 AUTO-TUNE FUEL-INJECTION SYSTEM 1021-0006 For 01-08 Twin Cam w/ Delphi® EFI system (exept 08 Touring models w/ electronic throttle body) REPLACEMENT COMPONENTS FOR TCFI II FUEL-INJECTION CONTROLLER 1022-0008 Repl. WEGO II oxygen sensor 7806-1563 18 x 1.5mm weld nut (for mounting sensor to exhaust pipe) (ea.) 7806-1564 18 x 1.5mm hex socket plug (for plugging 18 x 1.5 hole after tuning) (ea.) SUG. RETAIL $874.95 112.95 5.95 5.95 DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 332 TWIN TUNER FUEL-INJECTION CONTROLLER •Allows easy adjustments to OEM Delphi fuel-injection systems to improve performance and match the requirements of performance parts •Mode and up/down pushbutton switches make fuel trim adjustments in the RPM and throttle position ranges required by most applications; fuel trim value is displayed on a bright daylight-readable LED display •Advanced mode (using optional USB Interface PART #2101-0075 and PC Link Tuner software) 1020-0358 allows precise fuel adjustments and independent adjustments to the front and rear cylinders •Can use DynoJet Power Commander maps •Easy plug-in installation and setup •Compact size – only 4” L x 2” W x 1/2” H •Compatible with Twin Scan II+ Tuning Aid – install the Twin Scan II+ and ride the bike, then copy the air/fuel ratio corrections calculated by the Twin Scan II+ into the PC Link Tuner software NOTE: Not legal for sale on use on pollution-controlled vehicles. PART # DESCRIPTION 1020-0358 For 01-09 Big Twin w/ 36-pin Delphi EFI (except 08-09 Touring models w/ electronic throttle control) and 08-09 Buell XB, 1125R w/ DDFI fuel-injection system 1020-0834 For 99-07 Buell w/ DDFI fuel-injection system SUG. RETAIL $217.95 217.95 NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturer’s information. All part numbers in BOLD MAGENTA are new for 2009. SECTION 6 WINDSHIELDS TWIN TUNER EX •Allows easy adjustments to OEM Delphi fuel-injection systems to improve performance and match the requirements of performance parts •50-state street legal (ARB E.O. D-641) – fuel adjustments with the Twin Tuner EX are only allowed above 60% throttle position or 5000 rpm •Mode and up/down pushbutton switches make fuel trim adjustments in the RPM and throttle position ranges required by most applications; fuel trim value is displayed on a bright daylight-readable LED display •Advanced mode (using optional USB Interface PART #2101-0075 and PC Link Tuner software) allows precise fuel adjustments and independent adjustments to the front and rear cylinders •Can use DynoJet Power Commander maps •Easy plug-in installation and setup •Compact size – only 4” L x 2” W x 1/2” H •Compatible with Twin Scan II+ Tuning Aid – install the Twin Scan II+ and ride the bike, then copy the air/fuel ratio corrections calculated by the Twin Scan II+ into the PC Link Tuner software PART # 1020-0835 DESCRIPTION For 01-08 Big Twin w/ 36-pin Delphi EFI (except 08 Touring models w/ electronic throttle control) and 08-09 XB, 1125R Buell w/ DDFI fuel-injection system SUG. RETAIL TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS $217.95 ENGINE USB INTERFACE TRANSMISSION & DRIVELINE •Interfaces all Daytona Twin Tec engine controls (ignition and fuel injection systems) to USB port on newer laptops •Includes all required adapters for PART #s DS-242372, DS-242374, DS-242375, DS-242377 and 2101-0034 ignitions and 1021-0001, 1021-0002, 1021-0004, 1021-0005 and 2101-0076 fuel injection systems •Compatible with all Daytona Twin Tec software and Windows 98/MN/XP (updated software drivers included on CD-ROM) •Includes 6’ USB cable •USB interface allows you to connect to laptops with no serial port, and to multiple engine controls; no need for multiple cables or separate USB adapters •A switch activates operation, with one position for TC88 and the second position for all other engine control products •Includes a connector that mates with the four-terminal Deutsch data link connector on 99-up Twin Cam 88 models, as well as adapters for earlier Shovelhead and Evolution applications GASKETS & SEALS ELECTRICAL LIGHTING NOTE: Not compatible with Twin Scan 88 and WEGO II systems, which require a separate adapter. PART # 2101-0075 DESCRIPTION For all Daytona Twin Tec engine controls SUG. RETAIL $99.95 HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS TERMINAL VELOCITY III FUEL MANAGEMENT SYSTEMS 1020-0773 •Maximizes performance while decreasing emissions and fuel consumption •Horsepower and torque increases •Automatically re-calibrates for modifications made to the motorcycle such as aftermarket exhaust, air cleaner, etc. •Adjusts as you ride, compensates for changes in engine load conditions •Available for Delphi, Magneti-Marelli ECU systems and 08-09 throttle-by-wire models •Works in conjunction with the factory closed-loop system; some applications use factory O2 sensors (see chart), other applications include O2 sensor •Quick-connect plugs for easy installation •Works with factory and race tuner downloads NOTE: Not for sale or use on California emission-equipped motorcycles. PART # DESCRIPTION SUG. RETAIL 1020-0773 For 01 FXST, all 02-04 EFI models, 02-07 V-Rod; flat plug/TPS and includes one O2 sensor $499.95 1020-0774 For 05-06 FXST, 05-06 FLHT/FLHR/FLTR; 499.95 round plug/TPS and includes one O2 sensor 1020-0775 For 95-01 models w/ Magnetti-Marelli EFI; 499.95 flat plug/TPS and includes one O2 sensor 1020-0776 For 07-09 FXST, 06-09 Dyna, 07 FLHT/FLHR/FLTR/ 499.95 FLHX; round plug/TPS and uses factory O2 sensors DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES PART # 1020-0777 1020-0778 1020-0779 2130-0009 2404-0059 DESCRIPTION SUG. RETAIL For 08-09 FLHT/FLHR/FLTR/FLHX; 6-pin oval plug/ TPS and uses factory O2 sensors $499.95 For 07-09 XL; flat plug/TPS and uses 499.95 factory O2 sensors For 08-09 V-Rod (all), flat plug/TPS and uses 499.95 factory O2 sensors Repl. O2 sensor (ea.) 104.95 Repl. O2 bung (ea.) 15.95 NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturer’s information. All part numbers in BOLD MAGENTA are new for 2009. TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 333 SECTION 6 WINDSHIELDS TOURING LUGGAGE EZFI TUNER •Add-on module is perfect for tuning situations that require just a little tweaking: only affects fuel delivery (not stock ECM/TSSM functions such as ignition timing, turn signals, safety, instruments, etc.) •Connects to stock ECM for most stock engines •Includes software and instructions •Optional diagnostic cable available 1020-0570 1020-0569 NOTE: Since the EZFI module does not control ignition timing, it is not recommended for engines over 96” cubic inches with higher than stock compression ratios. NOTE: Not legal for sale or use on pollution controlled vehicles. SEATS & SISSY BARS PART # DESCRIPTION FOR ALL 01-07 DELPHI EFI-EQUIPPED BIG TWIN MODELS 1020-0569 EZFI module kit SUG. RETAIL $229.95 PART # DESCRIPTION SUG. RETAIL FOR ALL 01-07 DELPHI EFI-EQUIPPED BIG TWIN MODELS (CONT) 1020-0570 Diagnostic cable $104.95 EXHAUST FUEL/AIR SYSTEMS 1020-0323 ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING 1020-0836 HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 334 1020-0532 THUNDERMAX ECM WITH AUTO-TUNE CLOSED LOOP SYSTEM 1022-0039 •ThunderMax ECM with Auto-Tune module mounts conveniently in place of the factory ECM and plugs in to the existing harness •Maps, software and firmware updates available on line at no charge •Quickly find the best map for your application using SmartLink Map Filters •With the Auto-Tune, AFR tuning for component and exhaust changes are self-adjusting – simply install, download a map and ride while Auto-Tune maintains target AFR in all conditions •Includes ThunderMax ECM and Auto-Tune Module, plug-in harness and two wide band sensors, SmartLink Software and communication cable, Quick-Start Easy Install and Comprehensive User’s Manual, technical support and free software and updates •Select and install a matching base map and enjoy the efficiency of a balanced fuel curve for throttle response like youíve never imagined •No extensive dyno tuning required for most models •Alpha-N design unaffected by long duration camshafts •Replaces factory ECM – easy plug-in installation and set-up •Simple adjustable rev limit, idle, speedo calibration and decel pop control settings •Easily adjust fuel, ignition timing and cold start maps •Supports nitrous and supercharger applications •Versatile – plug and ride or live-tune a custom application •Logs engine starts, engine temperatures and total hours of operation time in 100 RPM increments SUG. •Read diagnostic codes through software or traditional methods PART # DESCRIPTION RETAIL •Record live data during riding or tuning sessions; 1020-0323 For 01-09 Big Twin models w/ choose replay speed for data analysis Delphi EFI (except 08-09 Touring models) $899.95 •ThunderMax includes SmartLink Software and cable for easy PC tuning, 1020-0836 For 08-09 FLT, FLHR, FLHX and FLTR models 989.95 maps for popular engine combinations and Quick-Start Easy Install 1020-0817 For 02-09 V-Rod models 899.95 and Comprehensive User’s Manual 1020-0532 For 07-09 XL models 899.95 NOTE: Legal in California only for racing vehicles which 1022-0039 Repl. oxygen sensor (ea.) 107.95 may never be used upon a highway. NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturer’s information. All part numbers in BOLD MAGENTA are new for 2009. SECTION 6 WINDSHIELDS TOURING THUNDERMAX 50 •California ARB-legal (Executive Order #D-644) complete replacement engine management system for all 01-06 88 cu. in. Delphi®-equipped EFI model Harleys •ThunderMax 50 converts these open-loop EFI bikes to a feedback system that automatically corrects air fuel ratios through the use of wide-band oxygen sensors and the ThunderMax AutoTune module •This system allows continuous AFR tuning, keeping the engine at the specified air fuel ratio regardless of the changes in ambient conditions or terrain the vehicle is being operated in – without tuning on a dynamometer •Features increased torque and power over the stock system and maintains excellent fuel economy •System properly self-tunes aftermarket exhaust systems •Adjustable rev limiter •Provides access to read vehicle diagnostic trouble codes PART # 1020-0837 DESCRIPTION For 01-06 Softail, 04-05 Dyna and 02-06 Touring models LUGGAGE SEATS & SISSY BARS EXHAUST SUG. RETAIL $899.95 FUEL/AIR SYSTEMS THUNDERMAX EFI AUTO-TUNE MODULE •Interfaces with the ThunderMax ECM to provide real-time data of the air/ fuel ratio read by wide-band oxygen sensors installed in the exhaust system •Data is processed in milliseconds by the ThunderMax, which makes instant adjustments to maintain the front and rear cylinder air/fuel ratios specified by the SmartLink software, creating a self-tuning system •Modular design attaches directly to the ThunderMax ECM, eliminating any mounting hassles •Allows ThunderMax ECM owners (version 4.0 and higher) to add true wide-band closed-loop automatic tuning •System fits all 01-08 EFI Harley-Davidson models equipped with ThunderMax (V.4+) ECM (PART #1020-0321) •Requires exhaust system fitted with bungs for oxygen sensors •Allows the user to program the desired air/fuel ratio for maximum power, maximum economy or anywhere in between •Targets specific AFRs, which adjust as you ride •Includes two wide-band oxygen sensors •No splicing required, system simply plugs into the factory wiring harness for total closed-loop functionality •Special Feature – you can view live air/fuel ratios without a computer link by using a ThunderMax digital speedometer ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL NOTE: Legal in California only for racing vehicles which may never be used upon a highway. PART # 1020-0322 DESCRIPTION Thundermax EFI Auto-Tune Module SUG. RETAIL $413.95 HANDLEBARS, CONTROLS & MIRRORS THUNDERMAX ECM •Open loop system allows you to take control of your EFI-equipped motorcycle •Maps, software and firmware updates available on line at no charge •Quickly find the best map for your application using SmartLink Map Filters •Includes ThunderMax ECM, SmartLink Software and communication cable, Quick-Start Easy Install and Comprehensive Users Manual, technical support and free software and updates •Select and install a matching base map and enjoy the efficiency of a balanced fuel curve for throttle response like you’ve never imagined •Alpha-N design unaffected by long duration camshafts •Replaces factory ECM, easy plug-in installation and set-up •Simple adjustable rev limit, idle, speedo calibration and decel pop control settings •Easily adjust fuel, ignition timing and cold start maps •Supports Nitrous and Supercharger applications •Versatile – plug and ride or live-tune a custom application •Logs engine starts, engine temperatures and total hours of operation time in 100 RPM increments •Read diagnostic codes through software or traditional methods •Record live data during riding or tuning sessions; choose replay speed for data analysis •ThunderMax includes SmartLink Software and cable for easy PC tuning, maps for popular engine combinations and Quick-Start Easy Install and Comprehensive User’s Manual •Expandable to “closed loop” with available ThunderMax Auto-Tune module NOTE: Legal in California only for racing vehicles which may never be used upon a highway. PART # DESCRIPTION 1020-0321 For 01-09 w/ Delphi EFI (except 08-09 Touring models) LIGHTING CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES SUG. RETAIL $485.95 FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES THUNDERMAX PIGTAIL HARNESS TIRES, TUBES & WHEELS •Allows a second port for the communication cable connection to the ThunderMax •It is installed to the bike’s wiring harness at the 36-pin ECM connector (connection requires harness plug disassembly; two terminated wires are inserted into two unused ports in the 36-pin connector, and a ground wire added) •Handy for motorcycle models with tight clearances around the ECM such as Dyna, Softail Rocker and 02-05 V-Rod models NOTE: Requires ThunderMax ECM with serial number 114000 or higher (produced beginning August 2008). Will not work on previous model ThunderMax ECM HARDWARE, CHEMICALS & TOOLS PART # 1022-0059 DESCRIPTION ThunderMax pigtail harness SUG. RETAIL $18.95 NOTE: Some products may not be legal for sale or use on pollution controlled vehicles, check your local laws and the manufacturer’s information. All part numbers in BOLD MAGENTA are new for 2009. COVERS, SECURITY & GENERAL 335 SECTION 6 WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS 1050-0001 1022-0037 1010-0015 1020-0027 EXHAUST THUNDERJET® EFI THROTTLE BODIES AND MANIFOLDS FUEL/AIR SYSTEMS ENGINE •Replaces the OEM throttle body and manifold •Throttle bodies accept the OEM stock components, including injectors •Matching manifolds are available separately for various cylinder lengths •High-flow air cleaner assembly is also required (sold separately) •Air cleaner assembly PART #1010-0015 accepts air cleaner covers PART #DS-288949 and PART #DS-288951 (sold separately) NOTE: Will also fit round port Screamin’ Eagle heads. 1010-0268 NOTE: Legal in California only for racing vehicles which may never be used upon a highway. TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL SUG. RETAIL PART # DESCRIPTION FOR 06-09 DELPHI-EQUIPPED TWIN CAM (EXCEPT 08-09 DRESSER) 1022-0037 54mm throttle body/manifold assembly $599.95 1022-0038 60mm throttle body/manifold assembly 599.95 FOR 01-05 DELPHI-EQUIPPED TWIN CAM 1020-0027 50mm throttle body 399.95 1020-0028 54mm throttle body 399.95 1050-0001 Manifold for 4.937” length cylinders (stock length) 199.95 1050-0002 Manifold for 5.013”-5.016” length cylinders 199.95 SUG. PART # DESCRIPTION RETAIL AIR CLEANER ASSEMBLIES FOR ALL THUNDERMAX EFI THROTTLE BODIES 1010-0015 Accepts 8” round Evolution-style cover (cover not included) $239.95 1010-0268 Accepts OEM Twin Cam “football” cover (cover not included) 217.95 LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1010-0236 CABLES 1050-0151 BRAKES 1022-0025 1022-0029 TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 336 1022-0024 1022-0026 54MM SINGLE-BORE THROTTLE BODIES/ MANIFOLDS/AIR CLEANERS •Designed for riders seeking the greatest possible performance gains from their fuel-injected engines •By utilizing air column inertia and carefully timed gas dynamic pressure waves, the S&S VFI Tuned Induction systems ram additional air into the cylinders for increased mid-range torque •For maximum tunability and performance gains an S&S Variable Fuel-Injection (VFI) module is recommended (sold separately), but any compatible, programmable module with enough capability and tuning range can be used •Components must be purchased separately to complete a Single-Bore EFI assembly PART # DESCRIPTION SUG. RETAIL THROTTLE BODIES 1022-0029 For stock 01-05 EFI Big Twin and aftermarket models (Delphi-style) $740.95 1022-0030 For stock 95-01 EFI Big Twin and aftermarket models (Magneti-Marelli-style) 899.95 MANIFOLDS 1050-0151 For 80”, 88”, 89”, 95”, 96”, 103” and 106” motors 125.95 1050-0152 For 116” motor 125.95 TEARDROP AIR CLEANERS 1010-0236 Desperado style 205.95 1010-0237 Teardrop style 205.95 1011-0898 1022-0028 PART # DESCRIPTION TUNED INDUCTION AIR CLEANERS 1022-0024 Natural 1022-0025 Black 1022-0026 Chrome TUNED INDUCTION AIR CLEANER BRACKET KIT 1022-0028 For 95-05 EFI Big Twin models REPLACEMENT PARTS DS-289408 Teardrop-style air filter 1011-0897 Repl. VFI-style air filter, red (ea.) 1011-0898 Repl. VFI-style air filter, blue (ea.) All part numbers in BOLD MAGENTA are new for 2009. SUG. RETAIL $246.95 267.95 334.95 385.95 17.95 48.95 48.95 SECTION 1022-0044 6 WINDSHIELDS TOURING 1022-0040 1013-0003 LUGGAGE 1022-0020 0706-0036 SEATS & SISSY BARS WILD THINGS™ THROTTLE BODY AND MANIFOLD 1022-0015 BIG BORE THROTTLE BODIES •Increase airflow by 35-88% over stock •Accept OEM components •Include matching intake manifold •Satin finish; sold each NOTE: Magneti Marelli throttle bodies require the use of a Delphi-style air cleaner. NOTE: Contact Speed’s Performance Tech Support for tuning information. PART # DESCRIPTION SUG. RETAIL FOR 06-09 DELPHI FUEL INJECTED TWIN CAM MODELS (EXCEPT 08-09 DRESSERS) 1022-0040 51mm $899.95 1022-0041 55mm 899.95 FOR 01-05 DELPHI FUEL INJECTED TWIN CAM MODELS 1022-0010 48mm 899.95 1022-0011 51mm 899.95 FOR MAGNETI MARELLI FUEL INJECTED BIG TWIN MODELS 1022-0014 48mm 950.95 1022-0015 51mm 950.95 •Let that engine breathe •Huge, 57mm straight-bore throttle body and high-flow manifold gives big increases in horsepower •All stock components bolt on to throttle body without modification •Uses the same air cleaner bolt pattern as stock •Allows use of stock cruise control •Require the use of throttle body accessories when installing a Wild Things throttle body and manifold •Re-shaped steel fuel supply tube for Softail models •Manifold spacer kit available for Dresser and Road King models •New split-flow high-volume fuel flow nozzles divide the fuel flow around the valve stem and guide •Directs fuel into the highest flow areas for the ultimate in fuel distribution •Flow enough fuel to feed even the nastiest street motors •Nozzles can be used for stock 06-09 applications with 50mm throttle bodies •PART #1022-0044 requires purchasing Kuryakyn intake flanges Part #467 (available seperately from Kuryakyn) •Sold each •Engineered by Mike Roland EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE PART # DESCRIPTION SUG. RETAIL FOR 06-09 TWIN CAM DELPHI FUEL-INJECTED MODELS (EXCEPT 08-09 FLHT/FLHR/FLTR/FLHX) 1022-0044 Wild Things™ throttle body for stock intake ports $699.95 FOR 01-05 TWIN CAM DELPHI FUEL-INJECTED MODELS 1013-0003 Wild Things™ throttle body and manifold for stock intake ports 595.95 1022-0019 Wild Things™ throttle body and manifold for 1.8” intake ports 599.95 WILD THINGS™ THROTTLE BODY ACCESSORIES 1022-0043 57mm high-flow fuel injection nozzles for 06-09 Twin Cam w/ Wild Things™ throttle body, 06-09 Twin Cam w/ stock throttle body or Screamin’ Eagle 50mm throttle bodies 79.95 1022-0056 Wild Things intake flanges for 99-05 Twin Cam 79.95 0706-0036 Steel fuel supply tube for 01-05 Softail 9.95 1022-0020 Spacer kit for 02-05 Dresser and Road King models 39.95 GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1022-0046 CABLES BRAKES GAS IT FUEL INJECTION KIT 1022-0047 1022-0048 QUICK-RESPONSE THROTTLE BODY AND MANIFOLD KITS •Replace OEM throttle body and manifold •Provide quicker throttle response through elliptical intake track design •Wider manifold to fit most taller engines •Compatible with all OEM electrical components, including throttle position sensors, air control motors and fuel injectors •Available with or without electronic components (MAP sensor, fuel rails and injectors) NOTE: Not compatible with 08-09 FLHT/FLHX/FLHR/FLTR models with electric throttle control. FOR 06-09 DELPHI EFI THROTTLE CABLE-STYLE BIKES W/ 100”-131” TWIN CAM MOTORS PART # DESCRIPTION KITS W/O ELECTRONIC COMPONENTS 1022-0050 62mm throttle body/manifold 1022-0048 58mm throttle body/manifold KITS W/ ELECTRONIC COMPONENTS 1022-0049 62mm throttle body/manifold 1022-0047 58mm throttle body/manifold SUG. RETAIL kit kit $827.95 775.95 kit kit 1,883.95 1,765.95 TANKS & OIL FILTERS •Allows the use of wild custom fuel tanks on 01-05 fuel-injected Delphi models •Relocates stock fuel pump, fuel pressure regulator, fuel filter and fuel level sending unit to underside of fuel tank (not included) •Includes steel weld-in plate, 3.75” x 8” aluminum manifold, all hardware and instructions •Tank bottom must be relatively flat to accommodate port installation •Requires vented tank or vented gas cap •Custom fabrication required •Made in the U.S.A. PART # 1022-0046 DESCRIPTION Gas It fuel injection kit DASHES & GAUGES FRAMES, SUSPENSION & FENDERS SUG. RETAIL $399.95 IF STARTING FROM SCRATCH, PURCHASE ALL OF THE FOLLOWING COMPONENTS FROM YOUR LOCAL H-D DEALER FOR 01-05 DELPHI SYSTEMS OEM PART # DESCRIPTION 27408-01 Fuel pressure regulator 61001-01 Fuel filter kit, includes clamps, o-ring, and hose. 62357-00 Fuel hose, fuel pump to filter 10222 Fuel hose clamps 75300-05 Fuel sender kit 72439-00B Connector assembly kit w/connector kit 62897-01B Pump assembly 62900-01B Fuel line, tank to intake 62189-01A Check valve assembly w/O-ring All part numbers in BOLD MAGENTA are new for 2009. FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 337 SECTION 6 WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE •Reduce your engine’s temperature between 20 and 30 degrees •Designed to change AFR from 14.6:1 to 14.2:1 •Installs in a few minutes; simply plug in between the oxygen sensors and the OEM wiring harness •Recommended for models with high flow air intakes and exhausts •Sold in pairs PART # 1020-0796 DESCRIPTION 06 Dyna and all 07-09 models VFI CLOSED-LOOP SENSOR KIT FUEL PUMP FOR FUEL-INJECTED CUSTOM BIKES O2 ENRICHMENT DEVICE •Pump can be mounted in nearly any tank •Hollow mounting bolts secure the pump flange to the bottom of the tank and provide an outlet for wiring and pressurized fuel •In-tank fiber filter prevents contaminants from damaging the pump or clogging fuel injectors •Kit contains pump, in-tank filter, inlet hose, mounting hardware and instructions •Pump specifications: 55 psi, 17.7 gal/hr, 3A draw SUG. RETAIL PART # 1009-0007 $111.95 DESCRIPTION Fuel-injected fuel pump for custom applications SUG. RETAIL •Owners of existing S&S engines equipped with a Delphi®-style VFI system can update to closed-loop operation by updating their module software via a download at the S&S website and then installing this closed-loop sensor kit •Kit includes two oxygen sensors, two weld-in exhaust bosses, an oxygen sensor wiring sub-harness, all required connectors and instructions PART # 1020-0824 $565.95 SUG. RETAIL $304.95 DS-189001 DS-289144 DS-289284 DESCRITION For 01-06 Delphi-style VFI modules GASKETS & SEALS DS-289143 ELECTRICAL 2103-1001 DS-289285 DS-289142 2103-1002 1022-0021 LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES ELECTRONIC FUEL-INJECTION COMPONENTS •All parts are OEM replacements •Check OEM parts manual for fitment and part number PART # INJECTORS DS-289142 1022-0004 DESCRIPTION SUG. RETAIL 95-98 FLT models; repl. OEM #27218-95 (21 lb. per hour) DS-289284 01-05 FXST, FLST, 02-05 FLT and 04-05 Dyna models; repl. OEM #27609-01 (32 lb. per hour) 2103-1001 99-01 FLT models (optional high flow, 31 lb. per hour) 1022-0009 01-05 FXST, FLST, 02-05 FLT and 04-05 Dyna models; repl. OEM #27609-01 (high flow, 47 lb. per hour) FUEL REGULATOR 1009-0005 95-99; repl. OEM #27219-95 (350 kPa) DS-289143 95-99; repl. OEM #27219-95 (300 kPa) AIR TEMPERATURE SENSOR DS-289144 95-05; repl. OEM #27270-95 ENGINE TEMPERATURE SENSOR DS-289285 99-09; repl. OEM #32446-99 BAROMETRIC PRESSURE SWITCH 1022-0018 95-98; repl. OEM #32424-95 (250 kPa) DS-189001 95-98; repl. OEM #32424-95 (100 kPa) $117.95 137.95 244.95 192.95 76.95 60.95 40.95 1022-0022 1050-0039 PART # DESCRIPTION THROTTLE POSITION SENSOR 2103-1002 01-05 FXSTI, FLSTI, FXSTDI, 02-05 FLT, FLHT and 04-05 Dyna models; repl. OEM #27629-01 1022-0021 06-09 Dyna, FXST, FLST and FLHT models; repl. OEM #27659-06 IDLE AIR CONTROL MODULE 1022-0004 01-05 FXSTI, FXSTSI, FXSTBI, FXSTDI, FLSTI, FLSTFI, 02-05 FLTRI, FLHRI, FLHRCI, FLHTCUI, 04-05 Dyna and 02-09 VRSC models; repl. OEM #27628-01 1022-0022 06-09 Dyna, FXST, FLST and 06-07 FLHT models; repl. OEM #27658-06 MAP SENSOR WITH SEAL 1050-0039 99-09 fuel-injected models (except 08-09 Dressers), 00-06 Big Twin Carb models and 04-06 XL; repl. OEM #32316-99 SUG. RETAIL $62.95 30.95 44.95 46.95 62.95 35.95 66.95 58.95 TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 338 INDUCTION MODULE ASSEMBLY O-RING KIT •Kit contains fuel fitting O-rings •Made in the U.S.A. PART # DS-174988 DESCRIPTION For 95-01 FLT, FLHT, FLHR fuel-injected models; repl. OEM #17043-95 All part numbers in BOLD MAGENTA are new for 2009. SUG. RETAIL $15.95 SECTION 6 WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS 1002-0002 SUPER E AND G SHORTY CARBURETOR KITS DS-0452 •Each carb kit includes an S&S Super E or Super G gas carburetor, S&S teardrop air cleaner assembly, manifold,(unless noted) mounting hardware, fuel line, clamps, overflow line, one extra intermediate jet and two main jets, VOES tubing (when applicable), installation and jetting instructions •Super E has a 17/8” (47.6mm) throat at the DS-0407 butterfly and a 19/16” (39.6mm) venturi and is recommended for use on Big Twin or Sportster engines up to 100-cubic-inch •Super G has a 21/16” (52.3mm) throat at the butterfly and a 13/4” (44.5mm) venturi and is recommended for use on 90-cubic-inch and larger high-performance and modified engines •21/16” G is not recommended for smaller, lower compression engines •If there is a doubt as to which carburetor to use, we suggest the 17/8” Super E •Carburetors only also available NOTE: S&S Super E & G carburetors require the use of a two-cable, pull open/ pull close throttle assembly; S&S kits are compatible with stock cables except as noted. EXHAUST DS-0419 FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE 1001-0018 NOTE: Kits for 88-03 XL models require the use of 81-87 style cables or custom cables; custom braided cables for XL models are available (see section 13) GASKETS & SEALS 1002-0025 NOTE: To use S&S Super E and Super G carb kits on Buell models, the stock throttle and idle cables must be changed. All 94-95 models, and the 96 S-2 and S-2T Thunderbolt (models that use Harley-style switches on 1” handlebars), should use throttle cable PART #DS-223533 and idle cable PART #DS-223534. All 96-02 S-1 Lightning, 97-01 S-3 and S-3T Thunderbolt, 97 S-2 and S-2T Thunderbolt and 97-02 M-2 Cyclone (models with European-style controls on 7/8” handlebars) will use throttle cable PART #DS-223529 and idle cable PART #DS-223530. IMPORTANT NOTE: Recommended for racing only, this carburetor is not legal for use in California on motor vehicles operated on public highways or in other states where similar pollution laws may apply. User must determine the suitability of the product for his or her use and assumes all risk and liability in connection therewith. 17/8” SUPER SUG. DESCRIPTION E CARB KIT RETAIL FOR BIG TWIN MODELS (INCLUDES MANIFOLD) For 99-05 Twin Cam DS-0452 $524.95 For 92-99 Evolution Big Twin DS-0419 519.95 For 84-91 Evolution Big Twin DS-0407 498.95 For 79-84 Shovelhead (band-style intake) DS-0411 500.95 For 66-78 Shovelhead (O-ring-style intake) DS-0402 488.95 FOR BIG TWIN MODELS (NO MANIFOLD) For 92-99 Evolution Big Twin DS-0442 508.95 For 84-91 Evolution Big Twin DS-0440 498.95 For 66-84 Big Twin 488.95 w/ five-gal. tank 1002-00021 21/16” SUPER G CARB KIT DS-0453 $544.95 DS-0434 539.95 DS-0427 544.95 DS-0431 513.95 DS-0422 503.95 - - - - - - •Super Shorty carbs can easily be installed on motorcycles equipped with stock H-D cruise control •Includes all parts and instructions needed to complete installation PART # DESCRIPTION SUG. RETAIL 1003-0022 For 98-06 Big Twin $62.95 17/8” SUPER SUG. DESCRIPTION E CARB KIT RETAIL FOR BIG TWIN MODELS WITH 5- AND 6-GALLON GAS TANKS (INCLUDES MANIFOLD) For 55-65 Panhead $513.95 (O-ring-style intake) DS-04012 FOR XL MODELS (INCLUDES MANIFOLD) For 04-06 XL 1001-0018 580.95 For 91-03 XL DS-0409 529.95 For 86-90 XL DS-0408 521.95 For 83-85 XL (band-style intake and VOES unit) DS-0406 503.95 For 57-78 XL (O-ring intake) (except models w/ mag. ignitions) DS-0404 480.95 FOR BUELL MODELS (INCLUDES MANIFOLD) For 94-02 Buell models DS-0448 575.95 1 PART # DESCRIPTION REPLACEMENT COMPONENTS 1002-0025 Super E carburetor only 1002-0026 Super G carburetor only DS-289408 Repl. air cleaner element for E & G carbs DS-289404 Repl. S&S air cleaner cover for E & G carbs DS-289405 Repl. air cleaner screws (10-pk.) 1011-0324 Repl. breather hose for 93-06 Big Twin and 91-03 XL CRUISE CONTROL ADAPTER KIT SUG. RETAIL SUG. RETAIL $313.95 329.95 17.95 128.95 .95 (ea.) 2 21/16” SUPER G CARB KIT LIGHTING SUG. RETAIL - $544.95 534.95 DS-0426 513.95 DS-0424 503.95 - - Air cleaner notched for clearance. Modifications needed to oil lines on 63-65 models. SUG. RETAIL $.95 (ea.) .95 (ea.) BRAKES TANKS & OIL FILTERS FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS VFI CRUISE CONTROL ADAPTER KITS All part numbers in BOLD MAGENTA are new for 2009. CABLES DASHES & GAUGES 5.95 •Cruise control adapter kits for S&S VFI Systems connect directly to stock 1003-0020 cruise control cables PART # DESCRIPTION 1003-0020 For 98-06 Evolution Big Twin and Twin Cam 1003-0019 For 93-97 Evolution Big Twin HANDLEBARS, CONTROLS & MIRRORS - DS-0429 DS-0428 PART # DESCRIPTION REPLACEMENT COMPONENTS (CONT) 1011-0325 Breather screw seals (silicone-coated steel washer), .520” (10-pk.) 1011-0326 Breather screw seals (silicone-coated steel washer), .380” (10-pk.) ELECTRICAL 1003-0019 SUG. RETAIL $25.95 29.95 HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 339 SECTION 6 ENRICHENERS WITH KNOB WINDSHIELDS 0657-0003 TOURING LUGGAGE SEATS & SISSY BARS •CNC-machined chrome1050-0168 plated aluminum •Replaces the existing enrichener when changing to a different style air cleaner •Fits S&S E and G carburetor 0657-0004 1050-0010 ENRICHENERS WITH KNOBS •Enricheners with eye-catching chrome choke knobs •Replaces the existing enrichener when changing to a different style air cleaner •Available in several styles PART # DESCRIPTION FOR S&S SUPER E & G CARBS 0657-0003 Spike 0657-0004 Flat Top 0657-0005 Power Flow EXHAUST PART # 1050-0010 1050-0168 0657-0005 $49.95 49.95 49.95 DESCRIPTION For S&S E and G choke knob •Beautifully chromed aluminum choke knob •Replaces the plastic knob on most carbs by using the included setscrew •Knob can also be screwed on to 10/32 threaded cables •Matching points cover, derby cover and head bolt covers available separately PART # 0657-0001 •CNC-machined billet aluminum with a polished finish •Replaces the stock enrichener lever •Made in the U.S.A. PART # 7805-0004 DESCRIPTION Ali Baba choke knob SUG. RETAIL $38.95 •This unique chrome cover fits over the choke lever on S&S E and G carbs •Comes with hex key and an extra stainless steel setscrew TRANSMISSION & DRIVELINE ELECTRICAL PART# DS-289039 CHOKE LEVER COVER FOR S&S CARBS •Die-cast chrome-plated cover for the choke lever on S&S E and G carbs •Comes with its own wrench and two setscrews PART # DS-289038 DESCRIPTION Choke lever cover SUG. RETAIL $9.95 EXTENDED FLOAT BOWL AND FOAM CELL CABLES •Increase float bowl capacity to 160cc and the float bowl won’t 1004-0002 go dry during full-throttle passes •Sold in a kit with extended main jet emulsion tube •Use with foam cell PART #1050-0045 (sold separately) to prevent fuel slosh at high G-forces •Foam cell installs over the extended emulsion tube 1050-0045 and is held down by a retainer plate •Made in the U.S.A. BRAKES PART # DESCRIPTION FOR S&S SUPER D CARBURETOR 1004-0002 Extended float bowl 1050-0045 Foam cell and retainer LIGHTING HANDLEBARS, CONTROLS & MIRRORS TANKS & OIL FILTERS DASHES & GAUGES SUG. RETAIL $44.95 S&S CHOKE LEVER COVER ENGINE GASKETS & SEALS SUG. RETAIL $52.95 52.95 ALI BABA CHOKE KNOB SUG. RETAIL S&S CHOKE KNOB FUEL/AIR SYSTEMS DESCRIPTION Round Spike design DESCRIPTION Choke lever cover SUG. RETAIL $10.95 S&S KNOB COVERS •S&S Knob Covers are made to cover both the choke and idle knobs on the S&S 1015-0002 1015-0004 Super “E” and “G” •These covers have that same mean look and attention to detail that makes Mother’s legendary •The choke knob attaches from the bottom of the head •The idle knob mounts from the rear of the head •Both knobs remain totally functional and feature increased accessibility •The i.d. of the choke cover measures .320” from the rear and the idle cover has an i.d. of .450” from the bottom; both attach PART # DESCRIPTION SUG. RETAIL securely with stainless 1015-0002 Skull $46.95 steel setscrews 1015-0004 Devil 46.95 •Available in chrome SUG. RETAIL $199.95 32.95 CHOKE KNOB •Unique design replaces the S&S enrichener lever on E and G carbs •Matches Thunder Cycle’s crankcase engine breathers PART # DESCRIPTION SUG. RETAIL 2103-0501 For use w/ custom air cleaners and velocity stacks $67.95 HOTOP S&S CHOKE KNOB ASSEMBLY •Replaces the stock S&S enrichener lever on E and G carbs when changing to a different style air cleaner assembly •Retains the stock plunger and spring •Setscrew allows progressive enrichment •Kit includes a chrome knob and a brass plunger nut •Made in the U.S.A. PART # DS-289138 DESCRIPTION Choke knob assembly SUG. RETAIL $41.95 FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 340 Removal tool 1050-0123 -6AN FUEL LINE FITTING FOR S&S CARBS •Allows the use of -6AN fittings and fuel line for fuel supply •For all S&S Super E and G series carbs •Used with Pingel fuel valves PART #DS-390285 (22mm inlet) and PART #0705-0058 (3/8” NPT inlet); and The Guzzler® fuel valves PART #s 0705-0029/0705-0050 (22mm inlet) and PART #s 0705-0028/0705-0056 (3/8” NPT inlet) •Sold each •Made in the U.S.A. PART # DS-289141 DESCRIPTION -6AN fuel fitting SUG. RETAIL $33.95 1050-0124 HI-FLOW FUEL NIPPLES •Flow more fuel than the stock OEM nipples •Available in single- and dual-carb setups •Also work with nitrous oxide or wherever an extra fuel line is needed •Eliminates the need for a dual-outlet fuel petcock •Includes removal tool •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR ALL 76-06 KEIHIN CARBURETORS (BUTTERFLY AND CV) 1050-0123 Single outlet $42.95 1050-0124 Dual outlet 42.95 All part numbers in BOLD MAGENTA are new for 2009. SECTION 6 WINDSHIELDS 42-18 TOURING LUGGAGE SEATS & SISSY BARS EXHAUST TM42-6 42-8 FUEL/AIR SYSTEMS HSR42/45 “SMOOTHBORE” CARBURETOR KITS •Kits include the redesigned 42mm/45mm smoothbore carb in a natural finish •Easier, faster installation using stock CV throttle cables •Excellent throttle response, more power, improved acceleration and better gas mileage •Order fewer part numbers to cover more applications •Installation instructions and hardware included TM42-6P HSR42/45 CARBURETORS •For the high-performance engine builder who needs a carb for specific custom applications •Available in standard or highly-polished finishes 42MM/45MM EASY KITS NOTE: Choke cable included, except for the TM42-6, which uses stock choke cable from CV-type carb. NOTE: Airbox adapter HS42/001-K must be ordered separately. PART # TM42-6 TM42-6P TM45-2 TM45-2P DESCRIPTION 42mm carb, standard finish 42mm carb, polished finish 45mm carb, standard finish 45mm carb, polished finish SUG. RETAIL $358.95 488.95 418.95 548.95 •Accept the original H-D intake manifold, choke cable, air cleaner and throttle cables •Keep the stock look of your bike •May be used with high-flow air filters designed for the stock CV carb 42/45MM TOTAL KITS •Everything needed for a complete installation •Include performance intake manifold, rubber flange, 42mm or 45mm carb, high-flow K&N filter, air cleaner cover, breather kit and hardware •84-89 models require the use of 90-95 Big Twin-style cables EASY KITS PART # DESCRIPTION SUG. RETAIL 42MM 42-18 For 99-06 Twin Cam 88 and 90-99 Evolution Big Twin (use stock air cleaner cover; may be used with a Screamin’ Eagle air filter kit; will not work with cruise control) $388.95 42-7 For 90-99 Evolution Big Twin (include chrome air cleaner cover; will not work with cruise control) 448.95 42-10 For 94-03 XL 1200 models (include special backing plate and hardware; use stock oval air cleaner cover and high-flow filter) 448.95 42-11 For 94-06 XL 1200 models and 94-02 Buell must use aftermarket air filter (include air filter adapter) 418.95 45MM 1002-0030 For 99-06 Twin Cam 88 and 90-99 Evolution Big Twin (use stock air cleaner cover; may be used with a Screamin’ Eagle air filter kit; will not work with cruise control) 418.95 TOTAL KITS PART # 42MM CARB KITS 42-8 42-19 45MM CARB KITS 45-2X 45-4X 48-2P 48-2X DESCRIPTION SUG. RETAIL For 84-99 Evolution Big Twin For 99-06 Twin Cam 88/95 $578.95 608.95 For 84-99 Evolution Big Twin For 99-06 Twin Cam 95 658.95 658.95 ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HSR48 CARBURETORS •These high-performance carbs are ideal for realizing the maximum potential from custom and race engines •Available in standard or highly-polished finishes •Both use stock H-D cables and come with a flange •For race and custom applications only PART # DESCRIPTION SUG. RETAIL 48-2X 48mm carb, standard finish $448.95 48-2P 48mm carb, polished finish 588.95 CRUISE CONTROL BRACKET FOR MIKUNI HARDWARE, CHEMICALS & TOOLS •Fits all years with Mikuni HRS42/45/48 using stock cables •Retains cruise control when adding a Mikuni/Screamin’ Eagle carb PART # 1013-0034 DESCRIPTION For Mikuni HSR42/45/48 carbs All part numbers in BOLD MAGENTA are new for 2009. SUG. RETAIL $147.95 COVERS, SECURITY & GENERAL 341 SECTION 6 WINDSHIELDS 1001-0009 TOURING 42MM MIKUNI CARB KITS •Kits include 42mm Mikuni carburetor, Hi-Flow Mikuni air filter assembly with chrome cover, Rivera intake manifold with cast finish and all required brackets and mounting hardware •Easy to install and tune LUGGAGE SEATS & SISSY BARS NOTE: Will require the use of a dual cable throttle assembly and 90-06 style cables. PART # DESCRIPTION SUG. RETAIL 1001-0009 For 70-84 Shovelhead motors $740.95 1001-0010 For 57-85 Iron Head Sportster motors (except models w/ magnetos) 725.95 EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL TOP GUN 48MM SINGLE MIKUNI CARB KIT •A must for big-inch motors •Legendary Rivera performance in a 48mm Mikuni carburetormanifold kit •Includes Rivera’s all new proprietary super-flow intake manifold specifically designed for the large venturi 48mm Mikuni carburetor •Noticeably improves performance and gas mileage •Polished finish NOTE: Use bracket PART #1013-0034 for bikes with cruise control. LIGHTING PART # DESCRIPTION 1001-0011 For 84-06 Evolution and Twin Cam motors SUG. RETAIL $1,039.95 HANDLEBARS, CONTROLS & MIRRORS BENDIX CARBURETORS •High-performance Bendix carburetors are easy bolt-on replacements that need no extra fitting or linkage connections •Most offer adjustable high-speed jets; all provide improved acceleration and easier, quicker starts •Made in the U.S.A. CABLES NOTE: All Bendix carbs may be used for other applications, provided correct cables are used. DS-289079 BRAKES TANKS & OIL FILTERS DASHES & GAUGES DS-289078 PART # DESCRIPTION DS-289078 40mm high-performance carb w/ adjustable main jet, standard finish, for all L81-89 H-D w/ dual-throttle cable linkage (will not fit models w/ CV carbs unless choke hook-up is fabricated, intake manifold purchased and cables modified) DS-289081 38mm high-performance carb w/ adjustable main jet, std. finish, for 69-75 Shovelhead; 57-75 XL (except models w/ magnetos) DS-289080 38mm standard repl. Bendix carb w/ fixed main jet, std. finish, for 69-75 Shovelhead; 57-75 XL (except models w/ magnetos) DS-289079 Choke cable accessory kit (required for installation of 40mm carb on 84-89 Big Twin, 86-87 XL Evolution) DS-174710 Intake-to-carb gasket for Bendix, fits 71-75 Big Twin; repl. OEM #27023-71 SUG. RETAIL $445.95 319.95 295.95 69.95 .95 FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 342 38MM CARB KIT •Kit includes carb, manifold adapter, hose clamps, throttle cable and two main jets, as well as a chrome front K&N air cleaner HIGH-PERFORMANCE CARB KIT NOTE: Does not include manifold. PART # DESCRIPTION DS-289086 38mm Mikuni carb kit for FX, FL and XL models to 81, or L81-89 H-D models with single-cable throttle control SUG. RETAIL $256.95 •Kit includes chrome-plated 40mm carburetor, fittings, adapters, accessories and installation instructions •Offers quicker starts and improved acceleration •Designed to fit OEM or performance air filters •Easy bolt-on installation PART # DESCRIPTION 1002-0001 For 90-99 Evolution Big Twin models All part numbers in BOLD MAGENTA are new for 2009. SUG. RETAIL $643.95 SECTION 6 WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS 2102-3008 EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING EDELBROCK PERFORMER SERIES CARBURETORS •EPS carburetors feature an adjustable accelerator pump for instant throttle response and easier starting •Offer replaceable main jet for precise fuel metering for exceptional top-end performance; an idle air bleed system to set idle fuel independently from other circuits, and a flat needle for superior fuel atomization that allows external needle adjustment without carb disassembly •Sealed 440 stainless steel shaft gives smooth operation for a lifetime; hard anodized flat side makes for unsurpassed wear resistance •Float bowl features an O-ring sealed fuel banjo that rotates 180° for easy custom fuel-line routing; each carb is wet flow-tested for quality •Available in Quick Kits •Quick Kits are designed to be used with stock OEM manifolds, cables and air cleaners •Available in ball-burnished (plain) in 38 or 40mm sizes •Replacement air filter element PART #E-3250 also available; SUG. RETAIL $42.95 HANDLEBARS, CONTROLS & MIRRORS CABLES NOTE: Carbs for 88-03 XL, 90-06 Big Twins spigot mount; all others are flange mount. NOTE: Some 86 883 and 1100 XL models have extra-large cylinder fins, so carbs may need to be spaced or fins modified. PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION 38MM 40MM 2102-3008 For 99-06 Twin Cam $419.95 2102-3009 For 99-06 Twin Cam 2102-3008 For 90-99 Evolution Big Twin 419.95 2102-3009 For 90-99 Evolution Big Twin 2102-3010 For 84-89 Evolution Big Twin 419.95 2102-3011 For 84-89 Evolution Big Twin 2102-3010 For 70-84 Shovelhead Big Twin 419.95 2102-3011 For 70-84 Shovelhead Big Twin 2102-3008 For 88-03 XL Evolution 419.95 2102-3009 For 88-03 XL Evolution 2102-3010 For 86-87 XL Evolution 419.95 2102-3011 For 86-87 XL Evolution SUG. RETAIL $419.95 419.95 419.95 419.95 419.95 419.95 REPLACEMENT JET NEEDLES PART # JET NEEDLES DS-289018 DS-289005 DESCRIPTION BRAKES TANKS & OIL FILTERS DASHES & GAUGES SUG. RETAIL 13-0 needle 15-0 needle FRAMES, SUSPENSION & FENDERS $17.95 17.95 FOOTRESTS & LICENSE PLATE FRAMES MAIN JETS •Top-quality main jets for Performer carburetors •PART #1006-0241 is a kit that contains one of each 13 main jets #64-#88 SUG. PART # DESCRIPTION RETAIL PART # 1006-0241 Main jet kit $61.95 1006-0007 1006-0001 64 main jet 6.95 1006-0008 1006-0002 66 main jet 6.95 1006-0009 1006-0003 68 main jet 6.95 1006-0010 1006-0004 70 main jet 6.95 1006-0011 1006-0005 72 main jet 6.95 1006-0239 1006-0006 74 main jet 6.95 1006-0240 AIR BLEEDS FOR EDELBROCK CARBS DESCRIPTION 76 main jet 78 main jet 80 main jet 82 main jet 84 main jet 86 main jet 88 main jet SUG. RETAIL $6.95 6.95 6.95 6.95 6.95 6.95 6.95 •Top-quality air bleeds available in a variety of colors PART # SIZE 1005-0001 20 1005-0002 25 1005-0003 30 1005-0004 35 1005-0005 40 1005-0006 45 1005-0007 50 All part numbers in BOLD MAGENTA are new for 2009. TIRES, TUBES & WHEELS COLOR Purple Black Gold Red Blue Green Orange SUG. RETAIL $9.95 9.95 9.95 9.95 9.95 9.95 9.95 HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 343 SECTION 6 WINDSHIELDS TOURING COMPLETE DUAL CARBURETOR KITS •Get maximum power from Evolution-style TP and S&S 124 cu. in. engines •Feature dual 40mm pumper chrome-plated carburetors •Also include Perma-Star manifold and billet air cleaner •Throttle cable sold separately PART # DESCRIPTION SUG. RETAIL 1001-0014 For 124” TP motors $1,774.95 1001-0015 For 124” S&S motors 1,774.95 LUGGAGE 1001-0014 SEATS & SISSY BARS EXHAUST 1010-0082 2102-3026 FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS PERFORMER SERIES DUAL-CARBURETOR KITS, MANIFOLDS AND AIR CLEANER •Designed for 84-06 Big Twins (except Ultra) •Kit includes chrome-plated carbs, mounting hardware and fuel line 1010-0008 •Perma-Star three-piece manifold sold separately •Dual-carb oval air cleaner has a billet-look aluminum top and a K&N 23/4” element (sold separately) •Replacement air filter PART # E-3325, SUG. RETAIL $34.95, for billet air cleaner also available NOTE: This setup may interfere with your leg if you are over six feet tall and your bike has forward pegs. PART # CARB KITS 2102-3025 2102-3026 2102-3027 DESCRIPTION SUG. RETAIL 34mm dual-carb kit for 80”-95” engines 38mm dual-carb kit for 96”-113” engines 40mm dual-carb kit for 114”-up engines DUAL-CARB INTAKE MANIFOLDS APPLICATIONS 99-06 Twin Cam std. 88”, 95” 84-99 Evolution Big Twin 80”, 88”, 89”, 96” 88” Evolution-style w/ short S&S cylinders 93” Evolution-style 107” Evolution-style 113” Evolution-style 121” Evolution-style 124” Evolution-style 1 $862.95 901.95 905.95 2102-3034 PART # DESCRIPTION DUAL-CARBURETOR BILLET AIR CLEANER 2102-3034 Billet air cleaner w/ K&N filter EDELBROCK AND TP HEADS (SQUARE INTAKE PORT) 2114-3003 DS-289237 1010-0009 1010-0009 1010-0011 1010-0082 - STOCK AND S&S HEADS 2114-3004 DS-2892411 1010-0008 1010-0010 1010-0008 DS-289241 1010-0083 1010-0085 $279.95 SUG. RETAIL $464.95 490.95 490.95 490.95 490.95 490.95 490.95 490.95 Except 88” with short S&S cylinders. FOOTRESTS & LICENSE PLATE FRAMES DS-223097 TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS OPTIONAL ENRICHENER CABLE KITS COVERS, SECURITY & GENERAL PART # DS-223097 DS-223073 DS-223072 344 SUG. RETAIL DS-223072 DESCRIPTION 16” side-mount enrichener cable kit Repl. cable for DS-223097 24” dash-mount enrichener cable kit MIXTURE ADJUSTMENT TOOL AIR CLEANER SPACER •For installing stock air cleaner and backing plate to an Edelbrock carburetor SUG. RETAIL $35.95 27.95 59.95 PART # DS-223077 DESCRIPTION (QS to CV bolt pattern) for 90-99 80” Big Twin, 88-03 XL SUG. RETAIL 3/8” All part numbers in BOLD MAGENTA are new for 2009. $43.95 •Replaces the mixture adjustment cover screw for easy, convenient adjusting SUG. PART # DESCRIPTION RETAIL DS-289199 Mixture adjustment tool $17.95 SECTION 6 WINDSHIELDS TOURING DEALER STOCKING CARBURETOR PARTS KITS •Kits are designed to help dealers by making it easier for them to service S&S products •Jet kit 1003-0015 contains three each of all intermediate jets and five each of all main jets, plus a main jet tool •Carburetor parts kit PART #1003-0016 contains replacement parts for S&S Super E and G carbs •Dealer stocking parts kit PART #1050-0024 1003-0016 1003-0015 contains kits PART #s 1003-0015 and 1050-0024 1003-0016, plus a miscellaneous parts kit containing the most commonly needed gaskets and parts to service S&S oil pumps, as well as top end gaskets for S&S engines of various bore sizes •Come in durable hinged vinyl divider boxes that have labels on the inside cover for easy location, identification and reordering of parts PART # 1050-0024 1003-0015 1003-0016 DESCRIPTION Dealer stocking parts kit (contains kits 1003-0015 and 1003-0016 below) S&S jet kit S&S carburetor parts kit DS-289111 112923 SUG. RETAIL $1,423.95 300.95 322.95 DS-289113 112903 LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS 1003-0046 ELECTRICAL LIGHTING 160057 160491 HANDLEBARS, CONTROLS & MIRRORS 1003-0056 CARBURETOR KITS AND REPLACEMENT COMPONENTS •Rebuild kits are available in master kits, body-only kits and accelerator pump kits •Replacement gaskets, O-rings and components are made from the highestquality materials available PART # REBUILD KITS 112923 112924 112903 DS-289111 DS-289112 DS-289113 DS-289183 1003-0021 CABLES 112084 DS-289185 DESCRIPTION SUG. RETAIL Master rebuild kit Super E (body, accelerator pump, fasteners, springs, idle mixture screw, seat and needle assembly) Master rebuild kit Super G (body, accelerator pump, fasteners, springs, idle mixture screw, seat and needle assembly) Rebuild kit for Super B (body rebuild kit) Rebuild kit for Super E (body rebuild kit) Rebuild kit for Super G (body rebuild kit) Accelerator pump rebuild kit for E & G (diaphragm, spring, check balls and springs, pushrod and required hardware) PART # DESCRIPTION SUG. RETAIL (EA.) REPLACEMENT COMPONENTS $.95 DS-289934 Manifold to carburator O-ring, Super G (10-pk.) DS-289935 Manifold to carburator O-ring, Super E (10-pk.) .95 DS-289933 Bowl gasket, Super E and G (10-pk.) 2.95 112091 Bowl gasket, Super B and D (10-pk.) 18.95 DS-173249 Carb to air cleaner gasket (5-pk.) 8.95 1/4” Insulator block w/ O-ring Super E 160491 10.95 1/4” Insulator block w/ O-ring Super G 160492 10.95 160057 1” Spacer block Super E 35.95 160357 1” Spacer block Super G 55.95 DS-289183 Gas line insulator 9.95 DS-289185 19” gas line 5.95 1003-0039 Idle speed/pump adjuster spring (10-pk.) 0.95 1003-0085 Idle mixture screw (5-pk.) 7.95 1003-0040 Idle mixture screw spring (10-pk.) 0.95 1003-0041 Bowl plug (5-pk.) 1.95 7 1 1003-0042 Needle: 1 /8” E & 2 /16” G (ea.) 10.95 1003-0043 Bellows seal, accelerator pump (5-pk.) 3.95 1003-0044 Diaphragm spring, accelerator pump (10-pk.) 0.95 1003-0045 Accelerator pump diaphragm (ea.) 12.95 1003-0046 Throttle cable guide/bracket for use w/ butterfly cables (ea.) 10.95 $73.95 76.95 38.95 36.95 38.95 18.95 PART # DESCRIPTION SUG. RETAIL (EA.) REPLACEMENT COMPONENTS (CONT) 1003-0021 Throttle cable guide/bracket for use w/ CV (constant velocity) cables (ea.) $10.95 1003-0047 Fast idle plunger/enrichener (ea.) 10.95 1003-0049 Accelerator pump pushrod (5-pk.) 4.95 1003-0050 Ball check spring (5-pk.) 1.95 1003-0051 Accelerator pump cap assembly (ea.) 21.95 1003-0052 Fuel inlet/seat for 17/8” E & 21/16” G carb (uses needle 1003-0042) (10-pk.) 10.95 1003-0054 Shim kit 5/16” i.d. breather (12-ct., various sizes) 8.95 14.95 1003-0055 Shim kit 1/2” i.d. breather (12-ct., various sizes) 1003-0056 Breather conversion kit for Big Twin (converts early S&S air cleaners to new-style breather hardware) 30.95 0.95 1003-0057 Bowl screws: 10-24 x 23/8” (10-pk.) 1003-0058 Pump cap screw 8-32 (10-pk.) 0.55 112084 Enrichment device for B series carb (will work on Super E & G carbs when changing air cleaners) (ea.) 31.95 All part numbers in BOLD MAGENTA are new for 2009. BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 345 SECTION 6 WINDSHIELDS HS42/001-K TOURING 990-662-002 LUGGAGE SEATS & SISSY BARS HSR48 MAIN JET EXTENSION KIT •Increases amount of fuel to float bowl •Completely submerges main jet within extender, eliminating chance of air bubbles getting though PART # 1006-0248 DESCRIPTION HSR48 main jet extension kit SUG. RETAIL $24.95 REPLACEMENT PARTS FOR HSR 42/45 CARB KITS PART # HS42/001-K 990-605-065 990-662-002 EXHAUST FUEL/AIR SYSTEMS DESCRIPTION Air box adapter w/ three mounting screws Short idle screw adjuster Choke cable, for use with Mikuni plastic nut, spring and brass plunger SUG. RETAIL $18.95 14.95 22.95 ENGINE TRANSMISSION & DRIVELINE KHS-016 PUMP BODY BOOT FOR BENDIX CARBS •Sold each PART # 5103 GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS DESCRIPTION 72-E76 XL, FX And FL W/ Bendix carbs SUG. RETAIL $8.95 CARBURETOR REBUILD KIT •Includes all the parts needed to rebuild HSR42/45 or HSR48 carburetors PART # KHS-016 KHS-031 KHS-031 DESCRIPTION HSR42/45 Carb rebuild kit HSR48 Carb rebuild kit SUG. RETAIL $39.95 39.95 DS-289090 CABLES 1003-0166 BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS DS-173528 FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS BENDIX CARB REPAIR KITS HARDWARE, CHEMICALS & TOOLS GENUINE BENDIX CARB REBUILD KITS COVERS, SECURITY & GENERAL PART # DESCRIPTION SUG. RETAIL DS-289084 40mm Bendix rebuild kit for L81-89 $57.95 DS-289090 Bendix carb rebuild kit for 72-E76 XL; 71-75 FX, FL; repl. OEM #27132-71 39.95 346 •Rebuild kit includes all necessary gaskets, seals, idle screw and accelerator pump •Accelerator pump is also available separately •Comes complete with all the necessary gaskets and seals, as well as an accelerator pump (except DS-173528 includes gaskets only) PART # DESCRIPTION SUG. RETAIL 1003-0166 Bendix carb repair kit for 72-E76 XL; 71-75 FX, FL (import) $19.95 DS-289097 Accelerator pump only for 72-E76 FX, FL; 71-75 XL (import) 10.95 DS-173528 Bendix gasket kit for 72-E76 XL, 71-75 FX/FL (Genuine James) 6.95 All part numbers in BOLD MAGENTA are new for 2009. SECTION 6 WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS DS-289109 DS-289089 CARB REBUILD KITS FOR KEIHIN CV •For use with all 90-06 Big Twin or 88-06 XL models using the CV carb •Includes all the necessary needles, O-rings, etc. for a complete rebuild PART # DESCRIPTION DS-289109 For all 88-06 CV carbs (James) DS-289098 For all 88-06 CV carbs (imported) EXHAUST CARB REBUILD KITS FOR STANDARD KEIHIN SUG. RETAIL $37.95 14.95 •Kits include the parts necessary for rebuilding Keihin carbs •Feature Viton (not neoprene) needles PART # DESCRIPTION SUG. RETAIL FOR 76-89 H-D; REPL. OEM #27006-76 DS-289099 Rebuild kit 76-78 (Japan) $24.95 DS-289089 Rebuild kit 76-89 (Taiwan) 16.95 DS-289105 Repl. accelerator pump boot for Keihin (5-pk.); repl. OEM #27311-76 1.95 (ea.) FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE 1013-0005 GASKETS & SEALS 1013-0006 ELECTRICAL 1013-0004 CARBURETOR SPACERS •Easy way to add extra torque and horsepower •Machined from solid 6061 T-6 billet aluminum that completely eliminates porosity problems •Machined finish can be polished to a bright luster •Made in the U.S.A. PART # DESCRIPTION FOR S&S E & B SERIES CARBURETORS (17/8”) 1013-0004 1” 1013-0005 11/2” 1013-0006 2” FOR S&S G & D SERIES CARBURETORS (21/16”) 1013-0007 1” 1013-0008 11/2” 1013-0009 2” LIGHTING HANDLEBARS, CONTROLS & MIRRORS SUG. RETAIL $33.95 39.95 39.95 33.95 39.95 39.95 CABLES LINKERT CARB REBUILD KIT •Includes all necessary gaskets, seals and O-rings PART # DESCRIPTION DS-289108 36-65 Linkert carb rebuild kit SUG. RETAIL $13.95 DS-289104 TANKS & OIL FILTERS DS-173537 CARBURETOR INSULATOR BLOCK KITS DS-174381 CARBURETOR AND INTAKE MANIFOLD SEAL KITS •Kits contain carb-to-intake seal and two intake-to-cylinder head seals unless noted PART # DESCRIPTION SUG. RETAIL DS-174381 40mm seal kit for 99-06 Twin Cam, 90-99 80” Evolution and 88-06 XL w/ OEM carbs $11.95 DS-173537 44mm seal kit for 99-06 Twin Cam, 90-99 80” Evolution and 88-06 XL w/ Screaming Eagle carbs 11.95 0934-1610 Carb/manifold seal kit for 66-84 Bendix/Zenith, 7.95 Keihin, Tillotson, Sportster, Shovelhead 0935-0088 S&S carb/manifold seal kit; repl. OEM # 27002-66-SS 12.95 0935-0083 SU carb/manifold seal kit; repl. OEM # 27002-66-SU 22.95 0935-0084 1660 Edelbrock manifold seal kit; repl. OEM # 27002-E1660 6.95 0935-0085 1671 Edelbrock manifold seal kit; repl. OEM # 27002-E1671 6.95 0935-0086 Ramjet rigid mount manifold seal kit; repl. OEM 27002-89R 6.95 BRAKES •Kits include 3/8” fiber insulator block and gaskets •Designed to reduce the risk of boiling fuel in the carb •Made in the U.S.A. PART # DS-289104 DS-174889 2011-1214 2011-1215 0935-0100 0934-0945 0935-0099 DESCRIPTION SUG. RETAIL For 76-80 FX and 79-84 FL models; will also fit any Bendix or Keihin carb when longer studs/bolts $18.95 are used (13/4” i.d.) For custom applications; 113/16” i.d. 18.95 w/ 3/8” mounting holes For custom applications; 1.86” i.d. 18.95 w/ 23/4” center-to-center mounting holes For custom applications; 2.06” i.d. w/ 3” center-to-center mounting holes 18.95 For 44-65, carb to intake (Linkert); repl. OEM #29250-55 14.95 For 40-65, carb to intake (Linkert to Bendix/Keihin); repl. OEM #27411-40A 6.95 For carb to intake (Screamin’ Eagle); repl. OEM #29250-99 22.95 All part numbers in BOLD MAGENTA are new for 2009. DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 347 SECTION 6 DS-289306 WINDSHIELDS RECALIBRATION KITS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE •Recalibrate your stock Keihin CV carb to make full use of the performance potential •Include the jets, needles, instructions, etc. necessary to recalibrate stock engines with CV carbs •Kits provide broad-range performance gains and maintain stock driveability PART # DESCRIPTION DYNOJET RECALIBRATION KITS DS-290347 For 00-06 Twin Cam DS-290148 For 99 Twin Cam DS-289306 For 96-99 80” Big Twin and 96-03 XL DS-289303 For 90-95 Big Twin, XL 883, 1200 DS-289450 For 89-03 XL 883 “race only” 1007-0001 For 04-06 XL 883/C DS-289451 For 98-03 XL1200 Sport 1007-0002 For 04-06 XL 1200/C/R DS-289301 For Buell Lightning S1 DS-289309 For 99-02 Buell M2 Cyclone DS-290348 For 00-02 Buell blast SUG. RETAIL $96.95 96.95 96.95 96.95 96.95 96.95 96.95 96.95 96.95 96.95 96.95 STAGE 1 JET KIT •Designed for motorcycles with stock engines using stock airbox, air filter and stock or aftermarket exhaust •Non-accelerator pump models •Fully adjustable to allow for the use of well-designed aftermarket exhausts and stock replacement air filter •Improves throttle response and driveability •Power increases of approximately 5% throughout the entire power range PART # DESCRIPTION SUG. RETAIL DJ-8101 88-89 XL 883/1200 models $96.95 DS-289075 TRANSMISSION & DRIVELINE DS-289076 GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES 1007-0157 DS-289121 DS-289120 THE ORIGINAL “POWER TUBE” ATOMIZER •Atomizer power tube and jets are CNC-machined from brass for consistency and accuracy •Power tube jet kits provide fine tuning with increased horsepower when using a less restrictive air cleaner and exhaust •Converts fuel from a squirting liquid to a fine mist •Eliminates spitting and popping through the carburetor •Master kits include slow jets, main jets, slide spring, drill bit and needles •Made in the U.S.A. NOTE: Covered under the following U.S. patent #s: 5,233,180/5,562,868/5,66 2,836/5,810,264/6,270,060. PART # DESCRIPTION SUG. RETAIL DS-289076 Performance master kit for 88-06 stock 40mm CV carbs $105.95 DS-289083 Performance master kit for 99-06 Screaming Eagle 44mm CV carbs 105.95 DS-289075 Power Tube for HSR 42 and 45 w/ jets 60.95 1007-0157 Power Tube for HSR 42 and 45 (w/o jets) 56.95 DS-289121 Power Tube for 88-95 stock CV carbs (Big Twin, XL, Buell) 85.95 47.95 DS-289120 Power Tube for S&S B, D, E and G series carburetors JET KIT •Recalibrate your stock CV carb to make the most out of the air cleaner, exhaust and cam changes or head work •Kit contains a #5 MAHR needle, 08BOO jet holder, #45, #48 and #50 slow jets, and #190, #195, #200 and #205 main jets •Suggested jetting guidelines are included with the kit •Made in the U.S.A. NOTE: Not for use on pollution-controlled vehicles used on streets or highways. PART # DESCRIPTION SUG. RETAIL DS-195100 For 99-06 Twin Cam 88 $56.95 FRAMES, SUSPENSION & FENDERS FOOTRESTS NO-HASSLE JET KITS & LICENSE CV CARBURETORS PLATE FRAMES FOR •Genuine Keihin parts TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 348 DS-289331 •Includes two slow jets, three main jets and a jet needle •No need for drilling •Detailed instructions for jetting your motor from stock to modified PART # DESCRIPTION SUG. RETAIL DS-289331 For 89-99 Evolution Big Twin $39.95 1007-0015 For 04-06 XL 883/1200 38.95 DS-289332 For 88-03 XL 1200 (except 97-03 1200S) 39.95 DS-289334 For 97-03 XL1200S, 94-98 Buell S1, S2/S2T, S3/S3T and M2 39.95 DS-289333 For 88-03 XL 883 39.95 DS-196002 Keihin slow jet screwdriver 15.95 RECALIBRATION KIT FOR 40MM KEIHIN CV CARB •Super high-quality recalibration kit for CV carbs •Kit has all the components for dialing in a CV carb with or without an accelerator pump PART # DESCRIPTION SUG. RETAIL DS-289304 For all 88-99 CV carbs (except Twin Cam 88) $36.95 All part numbers in BOLD MAGENTA are new for 2009. SECTION WINDSHIELDS THUNDERSLIDE JET KITS DS-290356 STAGE 7 THUNDERSLIDE WITH JET KITS •Stage 7 kits are for 80 plus horsepower engines and include a taller carburetor top for more slide movement •Revolutionary composite plastic slide provides unparalleled performance gains in both horsepower and mileage •Unique set of lift holes moderate how the slide moves with respect to throttle position; the faster the slide opens, the quicker the throttle response •Kits include jets, needles, clips, carburetor top and other necessary parts for CV carbs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL DS-290356 For 00-06 Twin Cam $164.95 DS-290352 For 90-99 Big Twin Evolution 164.95 DS-290351 For Screamin’ Eagle 44mm Keihin CV Twin Cam 88 164.95 DS-290350 For Screamin’ Eagle 44mm Keihin CV Evolution 164.95 6 •Designed for engines with stock or aftermarket air filter and exhaust system •Revolutionary composite plastic slide provides unparalleled performance gains in both horsepower and mileage •Unique set of lift holes DS-289307 moderate how the slide moves with respect to throttle position; the faster the slide opens, the quicker the throttle response •Kit also includes jets, needles, clips and other necessary parts for CV carbs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL DS-290349 For 00-06 Twin Cam $149.95 DS-290149 For 99 Twin Cam 149.95 DS-289307 For 90-99 Evolution Big Twin 149.95 DS-289308 For 89-03 XL 1200 (not Sport) (Stage 1) 149.95 DS-289454 For 98-03 XL 1200 Sport (Stage 1) 149.95 1007-0005 For 04-06 XL 1200/C/R 149.95 TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE 1007-0155 1007-0154 TRANSMISSION & DRIVELINE 1007-0156 GASKETS & SEALS THUNDERPRO THUNDERJET •ThunderJet’s patented third fuel circuit delivers needed fuel to the engine only at higher rpm (4,500 and up) •Designed for today’s larger-displacement engines, with a higher capacity fuel delivery tube for increased volume when used in larger, high-rpm engines •Allows use of the main jet to tune for smooth, broad mid-range power – supplement the top-end with the ThunderJet •Jets are used to control the amount of fuel sent to the engine •Comes with complete installation/tuning instructions and extra jets •The system can operate over a wide range of altitude and atmospheric conditions •Made in the U.S.A. CARBURETOR JET KITS •Designed to recalibrate OEM stock carburetors for use with Vance & Hines exhaust systems •Include complete needle assemblies with five ranges of adjustment, main jets, clips, washer and appropriate drill bits •Include detailed instructions for easy installation PART # DESCRIPTION SUG. RETAIL V22827 For 00-06 Twin Cam models $97.95 V22831 For Buell 00-05 Blast 97.95 ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS NOTE: Some machining of carb body is required. NOTE: Legal in California only for racing vehicles which may never be used upon a highway. PART # DESCRIPTION SUG. RETAIL FOR S&S G AND D CARBS 1007-0154 Polished $89.95 1007-0155 Natural aluminum 77.95 1007-0156 Black 77.95 CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES Keihin CV carb kits FRAMES, SUSPENSION & FENDERS S&S E and B carb kits FOOTRESTS & LICENSE PLATE FRAMES THUNDERJET KITS •ThunderJet’s patented third fuel circuit has a built-in air correction system that permanently solves the problem of poor mid-range and/or lean top-end performance •The system can operate over a wide range of altitude and atmospheric conditions •Made in the U.S.A. TIRES, TUBES & WHEELS NOTE: Some machining of carb body is required. NOTE: Legal in California PART # FOR KEIHIN CV CARBS 1007-0152 1007-0153 DS-289295 DS-289296 DS-289297 only for racing vehicles which may never be used upon a highway. DESCRIPTION SUG. RETAIL PART # DESCRIPTION FOR S&S E AND B CARBURETORS Natural aluminum $65.95 1007-0150 Polished Polished 82.95 1007-0151 Natural aluminum Red 65.95 DS-289298 Red Blue 65.95 DS-289299 Black Black 65.95 DS-289300 Blue All part numbers in BOLD MAGENTA are new for 2009. SUG. RETAIL $82.95 65.95 65.95 65.95 65.95 HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 349 SECTION 6 WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS JET KITS FOR S&S CARBS CV MAIN JET KIT •For jetting most stock and performance engines •Low-range kit contains one each of the following intermediate jets (.025, .0265, .028, DS-0451 .0295) and one each of the following main jets (.062, .064, .066, .068, .070, .072, .074) •High-range kit contains one each of the following intermediate jets (.0295, .031, .032. .033) and one each of the following main jets (.072, .074, .076, .078, .080, .082, .084) •Dealer jet kit contains three each of all intermediate jets (except 10050008 and 1005-0009) and five each of all main jets (except 1006-0233, 10060234, 1006-0235, 1006-0236, 1006-0237 and 1006-0238) plus a main jet tool •Replacement jets also available separately PART # DESCRIPTION SUG. RETAIL (EA.) JET KITS DS-0450 Low-range kit $44.95 DS-0451 High-range kit 44.95 1003-0015 Dealer jet kit 300.95 INTERMEDIATE JETS DS-94025 .025 intermediate jet (3-pk.) 7.95 DS-940265 .0265 intermediate jet (3-pk.) 7.95 DS-94028 .028 intermediate jet (3-pk.) 7.95 DS-940295 .0295 intermediate jet (3-pk.) 7.95 DS-94031 .031 intermediate jet (3-pk.) 7.95 DS-94032 .032 intermediate jet (3-pk.) 7.95 DS-94033 .033 intermediate jet (3-pk.) 7.95 1005-0008 .036 intermediate jet (3-pk.) 7.95 1005-0009 .040 intermediate jet (3-pk.) 7.95 MAIN JETS 1006-0228 .040 main jet (5-pk.) 6.95 1006-0229 .042 main jet (5-pk.) 6.95 1006-0230 .044 main jet (5-pk.) 6.95 1006-0231 .046 main jet (5-pk.) 6.95 1006-0232 .048 main jet (5-pk.) 6.95 1006-0233 .050 main jet (5-pk.) 6.95 1006-0234 .052 main jet (5-pk.) 6.95 1006-0235 .054 main jet (5-pk.) 6.95 1006-0236 .056 main jet (5-pk.) 6.95 1006-0237 .058 main jet (5-pk.) 6.95 1006-0238 .060 main jet (5-pk.) 6.95 DS-72062 .062 main jet (5-pk.) 6.95 DS-72064 .064 main jet (5-pk.) 6.95 DS-72066 .066 main jet (5-pk.) 6.95 DS-72068 .068 main jet (5-pk.) 6.95 DS-72070 .070 main jet (5-pk.) 6.95 DS-72072 .072 main jet (5-pk.) 6.95 DS-72074 .074 main jet (5-pk.) 6.95 DS-72076 .076 main jet (5-pk.) 6.95 DS-72078 .078 main jet (5-pk.) 6.95 .080 main jet (5-pk.) 6.95 DS-72080 DS-72082 .082 main jet (5-pk.) 6.95 DS-72084 .084 main jet (5-pk.) 6.95 •Kit contains 195, 200, 205, 210, 215 and 220 main jets •Made in the U.S.A. PART # DESCRIPTION DS-289186 For CV carbs on 90-06 Big Twin and 88-06 XL models SUG. RETAIL $19.95 MAIN JETS FOR CV-TYPE KEIHIN CARBS •Precision-made in Japan •Master jet kit consists of 14 fivepacks, includes all jets listed below from #140 to #205; you furnish box •Individual main jets sold in five-packs SUG. PART # DESCRIPTION RETAIL FOR 90-06 BIG TWIN AND 88-06 XL DS-289538 Master jet kit $2.95 DS-289533 #140 main jet 2.95 DS-289534 #145 main jet 2.95 DS-289535 #150 main jet 2.95 DS-289536 #155 main jet 2.95 DS-289321 #160 main jet 2.95 DS-289322 #165 main jet 2.95 DS-289323 #170 main jet 2.95 PART # DESCRIPTION FOR 90-06 BIG TWIN AND 88-06 XL (CONT) DS-289324 #175 main jet DS-289325 #180 main jet DS-289326 #185 main jet DS-289327 #190 main jet DS-289328 #195 main jet DS-289329 #200 main jet DS-289537 #205 main jet SUG. RETAIL $2.95 2.95 2.95 2.95 2.95 2.95 2.95 PILOT JETS FOR KEIHIN CARBS •Available for both styles (butterfly and CV) of Keihin carbs 76-06 •Precision-made in Japan •Master kit for CV-style consists of nine five-packs, includes all jets listed below from #40 to #54; you furnish box •Individual pilot jets sold in five-packs SUG. SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION RETAIL CV-STYLE CARB; 90-06 BIG TWIN BUTTERFLY-STYLE CARB; AND 88-06 XL 76-89 BIG TWIN AND 76-87 XL DS-289542 Master jet kit $2.95 DS-289310 #50 pilot jet $2.95 DS-289315 #40 pilot jet 2.95 DS-289311 #52 pilot jet 2.95 DS-289316 #42 pilot jet 2.95 DS-289312 #54 pilot jet 2.95 DS-289317 #44 pilot jet 2.95 DS-289313 #56 pilot jet 2.95 DS-289318 #45 pilot jet 2.95 DS-289314 #58 pilot jet 2.95 DS-289319 #46 pilot jet 2.95 DS-289320 #48 pilot jet 2.95 DS-289539 #50 pilot jet 2.95 DS-289540 #52 pilot jet 2.95 DS-289541 #54 pilot jet 2.95 DASHES & GAUGES FRAMES, SUSPENSION & FENDERS IDLE AIR ADJUSTING SCREW FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 350 •Knurled and slotted head for easy adjustment •Includes brass screw, O-ring, washer and spring •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1050-0172 For all CV carburetors $29.95 ADJUSTABLE MAIN JET FOR BENDIX OR ZENITH CARBS •Kit is easily installed by drilling and tapping a 9/32”-32 thread in the carb’s body •Main jet is completely adjustable and eliminates time-consuming jet changes when fine tuning, changing fuels or climates •Spiral tap is necessary when installing adjustable main jet on Bendix or Zenith carbs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL DS-289093 Adjustable main jet for Bendix or Zenith carbs $57.95 40MM CV VACUUM PISTON NOTE: No warranty on rubber diaphragm. PART # DESCRIPTION 2101-0008 For 88-06 40mm carb; repl. OEM #27585-88 All part numbers in BOLD MAGENTA are new for 2009. SUG. RETAIL $41.95 SECTION WINDSHIELDS RD PRECISION MAIN JETS •Brass carburetor jets are high precision and flow-calibrated for extremely accurate fuel flow rate •Available in a range of sizes for Mikuni and Keihin applications •High-quality replacement; NOT original Mikuni or Keihin jets •Individual jet sizes sold in 4-pack to dealers, sold each to consumer •Dealer kits that include a range of sizes also available Mikuni-style slot head 1006-0012 TOURING Mikuni-style hex head DEALER JET KITS PART # 1006-0012 1006-0013 1006-0014 1006-0015 1006-0016 1006-0017 6 TYPE Mikuni-style slot head (SJ prefix) Mlkuni-style hex head (HJ prefix) Mikuni-style hex head (HJ prefix) Keihin-style slot head (KJ prefix) Keihin-style hex head (CR prefix) Keihin-style hex head (CR prefix) DESCRIPTION 4-pc. each jet 2-pc. each jet 2-pc. each jet 4-pc. each jet 2-pc. each jet 2-pc. each jet SUG. RETAIL sizes 72.5 through 160 $209.95 sizes 70 through 230 90.95 sizes 240 through 500 90.95 sizes 80 through 190 171.95 sizes 80 through 158 107.95 sizes 160 through 235 107.95 LUGGAGE SEATS & SISSY BARS Keihin-style hex head Keihin-style slot head EXHAUST MIKUNI-STYLE SLOT HEAD (SJ PREFIX) PART # 1006-0018 1006-0019 1006-0020 1006-0021 1006-0022 1006-0023 1006-0024 1006-0025 1006-0026 1006-0027 JET SIZE 72.5 75 77.5 80 82.5 85 87.5 90 92.5 95 SUG. RETAIL (EA.) $2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 PART # 1006-0028 1006-0029 1006-0030 1006-0031 1006-0032 1006-0033 1006-0034 1006-0035 1006-0036 1006-0037 JET SIZE 97.5 100 102.5 105 107.5 110 112.5 115 117.5 120 SUG. RETAIL (EA.) $2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 PART # 1006-0038 1006-0039 1006-0040 1006-0041 1006-0042 1006-0043 1006-0044 1006-0045 1006-0046 1006-0047 JET SIZE 122.5 125 127.5 130 132.5 135 137.5 140 142.5 145 SUG. RETAIL (EA.) $2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 PART # 1006-0073 1006-0074 1006-0075 1006-0076 1006-0077 1006-0078 1006-0079 1006-0080 1006-0081 1006-0082 1006-0083 1006-0084 1006-0085 1006-0086 1006-0087 1006-0088 1006-0089 1006-0090 JET SIZE 175 180 185 190 195 200 210 220 230 240 250 260 270 280 290 300 310 320 SUG. RETAIL (EA.) $2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 PART # 1006-0091 1006-0092 1006-0093 1006-0094 1006-0095 1006-0096 1006-0097 1006-0098 1006-0099 1006-0100 1006-0101 1006-0102 1006-0103 1006-0104 1006-0105 1006-0106 1006-0107 1006-0108 JET SIZE 330 340 350 360 370 380 390 400 410 420 430 440 450 460 470 480 490 500 SUG. RETAIL (EA.) $2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 PART # 1006-0048 1006-0049 1006-0050 1006-0051 1006-0052 1006-0053 1006-0054 JET SIZE 147.5 150 152.5 155 157.5 160 170 SUG. RETAIL (EA.) $2.95 2.95 2.95 2.95 2.95 2.95 2.95 JET SIZE 70 80 90 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170 SUG. RETAIL (EA.) $2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 PART # 1006-0109 1006-0110 1006-0111 1006-0112 1006-0113 1006-0114 1006-0115 1006-0116 1006-0117 1006-0118 1006-0119 1006-0120 1006-0121 1006-0122 1006-0123 1006-0124 1006-0125 1006-0126 JET SIZE 510 520 530 540 550 560 570 580 590 600 610 620 630 640 650 660 670 680 SUG. RETAIL (EA.) $2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 JET SIZE 72.5 75 77.5 80 82.5 85 87.5 90 92.5 95 SUG. RETAIL (EA.) $2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 PART # 1006-0137 1006-0138 1006-0139 1006-0140 1006-0141 1006-0142 1006-0143 1006-0144 1006-0145 1006-0146 JET SIZE 97.5 100 102.5 105 107.5 110 112.5 115 117.5 120 SUG. RETAIL (EA.) $2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 PART # 1006-0147 1006-0148 1006-0149 1006-0150 1006-0151 1006-0152 1006-0153 1006-0154 1006-0155 1006-0156 JET SIZE 122.5 125 127.5 130 132.5 135 137.5 140 142.5 145 SUG. RETAIL (EA.) $2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 PART # 1006-0157 1006-0158 1006-0159 1006-0160 1006-0161 1006-0162 1006-0163 1006-0164 JET SIZE 147.5 150 152.5 155 157.5 160 170 190 SUG. RETAIL (EA.) $2.95 2.95 2.95 2.95 2.95 2.75 2.75 2.75 KEIHIN-STYLE HEX HEAD (CR PREFIX) PART # 1006-0165 1006-0166 1006-0167 1006-0168 1006-0169 1006-0170 1006-0171 1006-0172 1006-0173 1006-0174 1006-0175 1006-0176 1006-0177 JET SUG. RETAIL SIZE (EA.) 80 $2.95 82 2.95 85 2.95 88 2.95 90 2.95 92 2.95 95 2.95 98 2.95 100 2.95 102 2.95 105 2.95 108 2.95 110 2.95 GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES KEIHIN-STYLE SLOT HEAD (KJ PREFIX) PART # 1006-0127 1006-0128 1006-0129 1006-0130 1006-0131 1006-0132 1006-0133 1006-0134 1006-0135 1006-0136 ENGINE TRANSMISSION & DRIVELINE MIKUNI-STYLE HEX HEAD (HJ PREFIX) PART # 1006-0055 1006-0056 1006-0057 1006-0058 1006-0059 1006-0060 1006-0061 1006-0062 1006-0063 1006-0064 1006-0065 1006-0066 1006-0067 1006-0068 1006-0069 1006-0070 1006-0071 1006-0072 FUEL/AIR SYSTEMS PART # 1006-0178 1006-0179 1006-0180 1006-0181 1006-0182 1006-0183 1006-0184 1006-0185 1006-0186 1006-0187 1006-0188 1006-0189 1006-0190 JET SUG. RETAIL SIZE (EA.) 112 $2.95 115 2.95 118 2.95 120 2.95 122 2.95 125 2.95 128 2.95 130 2.95 132 2.95 135 2.95 138 2.95 140 2.95 142 2.95 PART # 1006-0191 1006-0192 1006-0193 1006-0194 1006-0195 1006-0196 1006-0197 1006-0198 1006-0199 1006-0200 1006-0201 1006-0202 1006-0203 JET SUG. RETAIL SIZE (EA.) 145 $2.95 148 2.95 150 2.95 152 2.95 155 2.95 158 2.95 160 2.95 162 2.95 165 2.95 168 2.95 170 2.95 172 2.95 175 2.95 PART # 1006-0204 1006-0205 1006-0206 1006-0207 1006-0208 1006-0209 1006-0210 1006-0211 1006-0212 1006-0213 1006-0214 1006-0215 1006-0216 JET SUG. RETAIL SIZE (EA.) 178 $2.95 180 2.95 182 2.95 185 2.95 188 2.95 190 2.95 192 2.95 195 2.95 198 2.95 200 2.95 202 2.95 205 2.95 208 2.95 All part numbers in BOLD MAGENTA are new for 2009. PART # 1006-0217 1006-0218 1006-0219 1006-0220 1006-0221 1006-0222 1006-0223 1006-0224 1006-0225 1006-0226 1006-0227 JET SUG. RETAIL SIZE (EA.) 210 $2.95 212 2.95 215 2.95 218 2.95 220 2.95 222 2.95 225 2.95 228 2.95 230 2.95 232 2.95 235 2.95 TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 351 SECTION 6 JET ASSORTMENT KITS FOR HSR42/HSR45/HSR48 WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS •HSR42 kit includes 150 through 170 main jets (2 each); 22.5 through 35 pilot jets (2 each); -96, -97 and -98 needles (1 each); 2 #60 a/p nozzles; needle clip; all necessary washers, special jet box •HSR45 kit includes 165 through 185 main jets (2 each); 20 through 32.5 pilot jets (2 each); -95, -96 and -98 needles (1 each); 2 #60 a/p nozzles; 2 O-rings, 4 jet needle E-rings; all necessary washers •HSR48 kit includes 180 through 210 main jets (2 each); 20 through 32.5 pilot jets (2 each); -95, -96 and -98 needles (1 each); 2 #60 a/p nozzles; 2 O-rings, 4 jet needle E-rings; all necessary washers •Some kit component are available separately PART # DESCRIPTION JET KITS KHS-025 HSR42 1007-0323 HSR45 1007-0322 HSR48 INDIVIDUAL PARTS 1007-03241 Jet washers (4-pk.) for HSR45 SUG. RETAIL $109.95 108.95 108.95 .95 PART # DESCRIPTION INDIVIDUAL PARTS (CONT) 1007-03271 O-rings (4-pk.) for HSR45 1007-03261 Pump nozzles (4-pk.) for HSR45/48 1007-0325 Needle jet E-rings (4-pk.) for HSR45/48 1004-0010 -96 needle jet for HSR45/48 SUG. RETAIL $3.95 5.95 .95 10.95 KHS-025 PART # DESCRIPTION INDIVIDUAL PARTS (CONT) 1004-0011 -98 needle jet for HSR45/48 1005-00121 -32.5 pilot jets (4-pk.) for HSR48 1006-02461 205 main jets (4-pk.) for HSR48 1006-02471 210 main jets (4-pk.) for HSR48 1 SUG. RETAIL $10.95 2.95 2.95 2.95 Sold to dealer as a 4-pack; sold to consumer as each. MAIN JETS FOR HSR CARBS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS •Large round-type head main jets used in HSR42/45/48 series carbs •From 150 through 200 in increments of 2.5 •Sold to dealer as 4-pack; sold to consumer as each •Genuine Mikuni PART # KN100604150 KN1006041525 KN100604155 KN1006041575 KN100604160 KN1006041625 KN100604165 KN1006041675 KN100604170 KN1006041725 DESCRIPTION #150 main jet #152.5 main jet #155 main jet #157.5 main jet #160 main jet #162.5 main jet #165 main jet #167.5 main jet #170 main jet #172.5 main jet SUG. RETAIL $2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 PART # KN100604175 KN1006041775 KN100604180 KN1006041825 KN100604185 KN1006041875 KN100604190 KN1006041925 KN100604195 KN100604200 PILOT JETS FOR HSR CARBS DESCRIPTION #175 main jet #177.5 main jet #180 main jet #182.5 main jet #185 main jet #187.5 main jet #190 main jet #192.5 main jet #195 main jet #200 main jet SUG. RETAIL $2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 2.95 POWER X-WING •Patented air vane requires no modifications to install •Acceleration gains from idle to wide-open throttle 1050-0180 •Dyno tests show 2-5 horsepower gains and 4-6 ft.-lbs. max torque increases on OEM H-D engines •Independent tests were conducted on 88”, 96” and 110” engines •Complements popular air filter system upgrades PART # 1050-0194 1050-0182 CABLES 1050-0181 BRAKES 1050-0180 1050-0195 1050-0196 1050-0197 1050-0205 FITS MODEL SUG. RETAIL 08-09 FLHT/FLHX/FLHR/FLTR models $129.95 06-09 Softail/Dyna, 06-07 FLHT/FLHX/FLHR/FLTR w/ Delphi EFI 129.95 01-05 Softail, 04-05 Dyna, 02-05 FLHT/FLHR/FLTR, 07-09 XL w/ Delphi EFI 129.95 88-06 models w/ OEM CV carb 129.95 Mikuni HSR 42/45 carbs w/ early style 1.75” H-D adapter 129.95 Mikuni HSR 42/45 carbs w/ late style 2” H-D adapter 129.95 Mikuni HSR 48 carb w/ 2” adapter 129.95 S&S Super E Shorty 129.95 TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 352 •Genuine Mikuni pilot jets •Sold to dealer as 4-pack; sold to consumer as each PART # KVM2848615 KVM28486175 KVM2848620 KVM28486225 KVM2848625 KVM28486275 KVM2848630 DESCRIPTION #15 pilot jet #17.5 pilot jet #20 pilot jet #22.5 pilot jet #25 pilot jet #27.5 pilot jet #30 pilot jet SUG. RETAIL $2.95 2.95 2.95 2.95 2.95 2.95 2.95 PART # KVM2848635 KVM2848640 KVM2848645 KVM2848650 KVM2848655 KVM2848660 •Genuine Mikuni jet needles •Needles are available in a variety of sizes to suit most applications •Sold each HSR42 J8-8DDY01-95 J8-8DDY01-96 J8-8DDY01-97 J8-8DDY01-98 HSR45/48 J8-8CFY02-95 J8-8CFY02-96 J8-8CFY02-97 J8-8CFY02-98 DESCRIPTION Richest Richer Standard Leaner SUG. PART # DESCRIPTION RETAIL 1050-0063 For OEM CV Carb $119.95 1050-0065 For Mikuni HSR 42 carb 119.95 1050-0066 For Mikuni HSR45 119.95 1050-0067 For Mikuni HSR48 119.95 SUG. PART # DESCRIPTION RETAIL 1050-0064 For 06-09 Delphi EFI (except 08-09 Dresser)$119.95 1050-0118 For 01-05 Delphi EFI 119.95 SUG. RETAIL $10.95 10.95 10.95 10.95 TURBULATOR •The turbulator uses a fixed-vane vortex design that turns your intake manifold into a violent mixing chamber TU-4 •These vanes eliminate heavy droplets of fuel, fuel stacking and keep fuel from puddling TU-1 •The result is no more load or dive spots – just crisp, clean throttle response throughout the powerband •Complete atomization also increases fuel mileage and eliminates stand-off •Made in the U.S.A. SUG. DESCRIPTION Bendix/Zenith Carbs S&S B & E series RETAIL $14.95 14.95 PART # TU-4 TU-5 DESCRIPTION CV carbs SS Super G DS-289101 •Provides more horsepower and power at 1/4 and 1/2 throttle •Mounts into the backside/airboot side of the carburetor •Slices the single air venturi going through the carburetor into two smaller, faster venturis via the Power Now “Power Plate™” •The Power Plate has a precisely positioned hole to drastically increase the speed of the top and bottom venturis, thus creating more horsepower and power for your bike SUG. RETAIL $2.95 2.95 2.95 2.95 2.95 2.95 JET NEEDLES FOR HSR SERIES CARBURETOR PART # TU-1 TU-2 POWER NOW DESCRIPTION #35 pilot jet #40 pilot jet #45 pilot jet #50 pilot jet #55 pilot jet #60 pilot jet SUG. RETAIL $14.95 14.95 DS-289106 DS-289102 THE SYSTEM II FUEL ATOMIZERS •Atomizers work as a turbulator to properly mix fuel entering the intake manifold for better efficiency and performance •Available to fit various carburetors •Made in the U.S.A. SUG. PART # DESCRIPTION RETAIL 5 DS-289101 Atomizer for 38mm Bendix and Keihin with 1 /8” i.d. manifold $18.95 DS-289102 Atomizer for 40mm S&S, Mikuni and Screaming Eagle with 17/8” i.d. manifold 18.95 DS-289106 Atomizer for CV carbs 18.95 KEIHIN CARB ACCELERATOR PUMP KIT •Removing the float bowl and drilling one hole is all that is required; no need to remove the carb from the engine •High-flow accelerator pump will increase fuel flow through the pump, significantly improving the low-end and mid-range response •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL DS-289096 For any 80-89 Harley models w/ stock Keihin carburetors $18.95 All part numbers in BOLD MAGENTA are new for 2009. SECTION FLANGE MOUNT INTAKE MANIFOLDS •For mounting an S&S E and G series carburetor or flange mount carburetor on a 99-06 Twin Cam motor with S&S or stock cylinder heads •Will also fit a 84-99 80” Evolution that requires a manifold with a map sensor port •Come with a map sensor port and match OEM intake ports •Made in the U.S.A. PART # DESCRIPTION DS-289146 S&S E-series intake manifold 1050-0046 S&S G-series intake manifold WINDSHIELDS FLANGE-MOUNT INTAKE MANIFOLDS SUG. RETAIL $83.95 83.95 SPIGOT-MOUNT INTAKE MANIFOLDS FOR S&S HEADS •Used to install a stock CV carburetor on S&S 35/8”, 4” and 41/8” bore motors •Will also fit S&S Hot Setup and Super Stock™ head kits •Made in the U.S.A. •Can be used to replace stock “compliance fitting” manifold on 84-89 and stock rigid-mount manifold from 90-99 •Use with stock or S&S cylinder heads •For use with stock 5.5550” length cylinders •Requires the use of S&S intake seals and flanges (sold separately) PART # DESCRIPTION SUG. RETAIL FOR 84-99 EVOLUTION-STYLE BIG TWIN 1050-0109 For S&S E, L, Super A, B, E, H-D Tillotson, Bendix, and Keihin carbs (no MAP sensor port) $83.95 1050-0110 For Super G carbs (no MAP sensor port) 83.95 INTAKE MANIFOLDS •Available for stock, +.050” and +.200” longer cylinders •Compatible with Bendix, Keihin or S&S Super E, B and G carbs •79-84 Shovelheads use rubber-band-type intake seals •66-78 Shovelheads use O-ring-type intake seals •Seals sold separately, see Section 9 •Made in the U.S.A. MANIFOLD CONVERSION KIT FOR 80” EVOLUTION $73.95 73.95 73.95 •Kit converts stock 80” Evolution manifold to a more rigid-mount system •Eliminates cracking and leaking problems associated with the stock rubber compliance fittings •Includes an S&S Performance manifold, mounting flanges, two specially molded O-rings and two .350” spacers for spacing out the stock air cleaner or carb mount bracket •Fits 84-99 80” models if flange-type carburetor or adapter is used •Replacement flange seals also available •Made in the U.S.A. NOTE: Not for use with an S&S G series carb. PART # DESCRIPTION DS-289230 Manifold conversion kit SUG. RETAIL $73.95 73.95 73.95 SEATS & SISSY BARS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS SUG. RETAIL $99.95 ELECTRICAL LIGHTING PART # SUPER G 1050-0047 1050-0048 1050-0049 DESCRIPTION SUG. RETAIL Std. +.050” +.200” $73.95 73.95 73.95 FOR L78-84 SHOVELHEADS AND 79-82 XL (W/O VOES) (BAND-TYPE) PART # DESCRIPTION SUPER B AND E DS-289232 Std. 1001-0007 +.050” 1001-0008 +.200 LUGGAGE FUEL/AIR SYSTEMS FOR 66-E78 SHOVELHEADS AND 57-78 XL (O-RING TYPE) SUG. RETAIL TOURING EXHAUST NOTE: Requires the use of S&S manifold O-rings and U-rings, sold separately. PART # ENGINE SIZE CYLINDER LENGTH SUG. RETAIL FOR S&S TWIN CAM STYLE MOTORS AND HEAD KITS 161722 88”/95” 4.9365” $99.95 161723 107” 5.995” 99.95 161724 116” 5.180” 99.95 FOR S&S BIG TWIN EVOLUTION STYLE MOTORS AND HEAD KITS 161733 88”/107” 5.375”/4.870” 99.95 161734 93”/113” 4.995” 99.95 161736 80”/89”/96” 5.550” 99.95 PART # DESCRIPTION SUPER B AND E DS-289231 Std. 1001-0005 +.050” 1001-0006 +.200” 6 PART # SUPER G 1050-0050 1050-0051 1050-0052 DESCRIPTION SUG. RETAIL Std. +.050” +.200” $73.95 73.95 73.95 SUG. RETAIL $28.95 BLACK FLANGE ADAPTERS •Rubber flange adapters fit 42mm, 45mm and 48mm spigot-type carburetors •Includes clamp •Sold individually HS42/018-42 PART # DESCRIPTION HS42/018-42 42mm, original straight-through design HS42/018-45 45mm, original straight-through design HS42/062-48 48mm, original straight-through design •For use with all current 0934-0665 S&S intake manifolds •O-rings sold in 10-pack 1003-0060 •U-rings sold each PART # DESCRIPTION SUG. RETAIL (EA.) O-RINGS (MANIFOLD TO CYLINDER HEADS) 1003-0060 For 84-06 Big Twin and 86-06 Sportster engines w/ S&S manifold $3.95 U-RINGS (CV CARB TO MANIFOLD) 0934-0666 40-42mm 14.95 0934-0665 44-45mm 14.95 RUBBER FLANGE ADAPTERS FOR SPIGOT-TYPE CARBURETORS BILLET FLANGE ADAPTER FOR SPIGOT-TYPE CARBS •Allows you to mount OEM late-model CV or Mikuni HSR-42 carbs on Sportsters, Panheads, Shovelheads or early Evolutions with two-bolt flange manifolds •CNC-machined from 6061 billet aluminum •Mounting holes are 2.75” on center •Can be polished, plated or painted •Carb-to-manifold seal also available; see section 9 •Made in the U.S.A.; sold each PART # DESCRIPTION DS-289219 Billet flange adapter HANDLEBARS, CONTROLS & MIRRORS INTAKE MANIFOLD O-RINGS AND U-RINGS CHROME INTAKE MANIFOLD FLANGES SUG. RETAIL $26.95 26.95 26.95 All part numbers in BOLD MAGENTA are new for 2009. BRAKES TANKS & OIL FILTERS DASHES & GAUGES •Adapters fit 38mm and 40mm spigot-type carburetors •Includes clamp M-VM-36-200 •Sold individually PART # DESCRIPTION SUG. RETAIL M-VM-36-200 36mm-38mm rubber flange adapter $17.95 M-VM-38-200 40mm rubber flange adapter – 43mm carb spigot o.d. (fits RS40, RS42) 17.95 M-VM-40-200 40mm rubber flange adapter – 52mm carb spigot o.d. 20.95 •Chrome flanges replace the stock flanges •Sold in pairs •Replacement intake manifold seals also available; see section 9 PART # DESCRIPTION DS-289212 For 90-05 Big Twin and 86-06 XL models CABLES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS SUG. RETAIL $22.95 COVERS, SECURITY & GENERAL 353 SECTION 6 WINDSHIELDS INTAKE MANIFOLD FLANGES TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL BILLET INTAKE FLANGES FOR SCREAMIN’ EAGLE ® THROTTLE BODIES •Made from high-strength, durable 6061 T-6 billet aluminum to increase strength and resist problematic cracking at the mounting holes •Direct replacement for the flanges included with Screamin’ Eagle 50mm throttle bodies made for 06-07 applications •Eliminate fatigue cracks and the resultant air leaks in the intake tract •Kit includes manifold seals •Made in the U.S.A. NOTE: Legal in California only for racing vehicles which may never be used upon a highway. PART # DESCRIPTION SUG. RETAIL 1022-0045 For 06-07 Screamin’ Eagle throttle bodies OEM #27623-05 $24.95 •Spring steel, chrome-plated clamp assemblies •Sturdy clamps are easy to install •Includes seals •Sold in pairs •Replacement seals also available, see Section 9 PART # DESCRIPTION DS-203089 For L78-84 Big Twin and 75-85 XL; repl. OEM #s 27063-80 and 27062-7 SUG. RETAIL $18.95 1015-0094 CABLES FRAMES, SUSPENSION & FENDERS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 354 SUG. RETAIL $79.95 •Spring steel, chrome-plated clamp assemblies with high-quality O-rings •Sold in pairs PART # DESCRIPTION DS-203094 For 55-E78 Big Twin and XL models; repl. OEM #s 27063-57 and 27060-55 SUG. RETAIL $14.95 SUG. RETAIL $15.95 1015-0095 CV CARBURETOR TOP COVERS •Machined from 6061 T-6 billet aluminum, polished to a high luster and chrome-plated •PART #s 1015-0094 and 1015-0096 relocate choke cable for easier access •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 88-06 CV40/44 CARBURETORS ON BIG TWIN, XL AND BUELL 1015-0093 Smooth w/ logo $53.95 1015-0094 Smooth w/ logo and choke cable bracket 59.95 1015-0095 Smooth 53.95 1015-0096 Smooth w/ choke cable bracket 59.95 FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS DESCRIPTION Wild Things intake flanges for 99-05 Twin Cam cylinder heads (pr.) •Smooth die-cast chrome cover replaces the OEM black plastic top cover •Installation is a snap; just remove the four OEM screws and bolt on the new cover with them PART # DESCRIPTION DS-288801 For 88-06 Harley CV carb models; repl. OEM #27040-88 1015-0096 DASHES & GAUGES •Now you can install 99-05 style Twin Cam cylinder heads on 06-07 Twin Cam models equipped with the Screamin’ Eagle 50mm throttle body or 06-09 style Wild Things throttle body •Use intake flange seals for 50mm Screamin’ Eagle throttle bodies •Reduced diameter socket head screws are included to ease installation •Sold in pairs SMOOTH CHROME CV CARB TOP COVER HANDLEBARS, CONTROLS & MIRRORS TANKS & OIL FILTERS $4.95 4.95 3.95 INTAKE MANIFOLD CLAMPS WITH O-RINGS LIGHTING BRAKES 1003-0060 SUG. RETAIL (EA.) WILD THINGS™ INTAKE FLANGES PART # 1022-0056 INTAKE MANIFOLD CLAMPS WITH SEALS 1015-0093 •Sold in 5-pack 1001-0019 •Replacement seals also available PART # DESCRIPTION FOR 84-05 BIG TWIN 86-06 SPORTSTER ENGINES WITH S&S INTAKE MANIFOLD 1001-0019 Front flange; repl. H-D #27009-86B 1001-0020 Rear flange; repl. H-D #27010-86B 1003-0060 Repl. seals (10-pk) KHS-029 KHS-028 MIKUNI CHROME CARB TOP COVER •Highly polished chrome cover gives a unique custom look •Available with or without embossed Mikuni logo PART # DESCRIPTION KHS-029 Cover w/ Mikuni logo KHS-028 Cover w/o Mikuni logo SUG. RETAIL $22.95 22.95 DS-190129 FLOAT BOWL SPEED SCREW KITS CARBURETOR SOCKET-HEAD BOLT KITS •Replace the stock screws with strong chrome socket-head bolts •For use on CV carburetors and S&S carburetors •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL DS-190129 For CV carburetor on 90-06 Big Twin and 88-03 XL models $25.95 DS-190695 For top cover only on 88-06 CV carburetors 10.95 DS-190697 For S&S E and G carburetor body and air cleaner 31.95 •Electropolished stainless steel for a great custom look •Will not corrode in extreme climates 1050-0158 •Longer and stronger than the stock screws, makes them easier to handle; will not round off •5/16” hex head design eases bowl removal and jet changing •Made in the U.S.A. PART # DESCRIPTION 1050-0158 For CV/HSR carbs 1050-0159 For S&S B&D carbs 1050-0160 For S&S E&G carbs All part numbers in BOLD MAGENTA are new for 2009. SUG. RETAIL $34.95 34.95 34.95 SECTION 6 WINDSHIELDS 1012-0046 TOURING 1012-0071 LUGGAGE 1012-0037 3-D BILLET BREATHERS 1012-0070 DRILLED BREATHER KITS •Billet aluminum construction •Bolt directly into cylinder heads •Sold in pairs •All mounting hardware included •Made in the U.S.A. PART # DESCRIPTION FOR 99-09 TWIN CAM 1012-0070 Chrome 1012-0071 Black anodized SUG. RETAIL $108.95 94.95 •CNC-machined from solid aluminum billet, then polished and treated to a dipping of luscious show chrome •Three-dimensional CNC engraving on the front •Foam baffle inside with ample vent slots in the back to allow engine to breathe freely •Rear access panel unscrews to allow easy servicing of foam filter element •Support brackets and breather bolts must be ordered separately, per your specific application •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 99-09 TWIN CAM (PR.) 1012-0047 3-D VooDoo breather kit $199.95 1012-0037 3-D Skull breather kit 199.95 FOR 93-99 EVOLUTION BIG TWIN AND 91-09 XL (PR.) 1012-0046 3-D VooDoo billet breather kit 189.95 1012-0036 3-D Skull breather kit 189.95 SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE DS-289187 GASKETS & SEALS ELECTRICAL DS-289002 1012-0049 CHROME BILLET BREATHERS LIGHTING 1012-0050 •Breathers are available for use with the H-D breather kit (single breather) or •Support brackets and breather bolts sold separately •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 99-09 TWIN CAM (PR.) 1012-0049 Finned Bullet $229.95 1012-0051 Finned Dagger 249.95 DS-289002 Dagger 249.95 DS-289189 Bullet 229.95 FOR 93-99 EVOLUTION BIG TWIN AND 91-09 XL (PR.) 1012-0048 Finned Bullet 214.95 for use with a carburetor support bracket (dual breathers) PART # DESCRIPTION FOR 93-99 EVOLUTION BIG TWIN AND 91-09 XL (PR.) (CONT) 1012-0050 Finned Dagger DS-289001 Dagger DS-289188 Bullet FOR USE WITH H.D. BREATHER KIT DS-289187 Bullet •Chromed billet aluminum crankcase breathers screw directly into cylinder heads •Allow a clean, simple way for the engine to “breathe” correctly PART # DESCRIPTION SUG. RETAIL 2106-1001 For all 93-99 Evolution Big Twin and 91-09 XL $99.95 $239.95 239.95 229.95 CABLES 99.95 BRAKES MALTESE CROSS TOP BREATHERS ENGINE BREATHERS SUG. RETAIL HANDLEBARS, CONTROLS & MIRRORS 1012-0029 CRANK VENTS AND SPACERS TANKS & OIL FILTERS 1012-0058 •Sharp styling and billet aluminum construction that’s been chrome finished •Internal filter is easily accessed when cleaning is required •Sold each PART # DESCRIPTION 1012-0030 For 99-09 Twin Cam 1012-0029 For 93-99 Evolution Big Twin, 91-09 XL 1012-0058 Replacement filter for all Wimmer top-breathers DASHES & GAUGES SUG. RETAIL $75.95 75.95 11.95 1012-0008 •Unlike any other vent •Longer stem allows room for most air cleaners •Check ball and valve ensures one-way flow •Take blow-by out of the heads or crankcase and suck it out the vent which allows pressure to be released, improving motor efficiency •Increase gas mileage, horsepower and life of the motor •Stem vents are used on Evolution and Twin Cam engines that breathe through the heads; inline vent is used on models that breathe through the crankcase 1012-0007 •Polished aluminum finish •Crank vent spacers are required when using stem vents with any Speed’s Performance Plus 1012-0296 high-velocity or Speedy Flow air cleaner kit; can also be used to custom space other crank vents or breathers •Crank vents sold each; spacer kits include two .300” x .990” spacers and two .615” x .990” spacers with O-rings PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION 1012-0007 Inline vent $90.95 1010-0296 Spacer kit for Twin Cam-style engines 1012-0008 Stem vent (2 required) 110.95 1010-0297 Spacer kit for Evolution-style engines All part numbers in BOLD MAGENTA are new for 2009. 1012-0297 FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS SUG. RETAIL $50.95 50.95 COVERS, SECURITY & GENERAL 355 SECTION 6 2110-1122 WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS 2110-1123 POWER VENT™ CRANKCASE BREATHER KITS •CNC-machined T-6 billet aluminum •Show-quality polished finish •One-way valve prevents backflow •Kits include machined bolts and plastic washers for a tight seal •Work with most CV carb and EFI applications •Accept 1/8” NPT fitting •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 2110-1123 For 93-99 80” Evolution $173.95 2110-1122 For 99-09 Twin Cam 173.95 DS-289600 2110-1124 PART # 2110-1124 DS-289600 DESCRIPTION For 91-09 XL For 70-92 80” Big Twin SUG. RETAIL $173.95 89.95 1011-0529 ENGINE DEVONATOR SERIES II CRANKCASE BREATHER/ SUPPORT BRACKET KHS-020 TRANSMISSION & DRIVELINE KHS-030 GASKETS & SEALS ELECTRICAL LIGHTING CRANKCASE BREATHER KITS •Allow installation of a 40mm or 42/45mm Mikuni “Smoothbore” carburetor kit on 93-06 Big Twin with the crankcase breather system PART # DESCRIPTION SUG. RETAIL KHS-020 Breather kit for HSR42/45 carb on Evo Big Twin $74.95 KHS-030 Breather kit for HSR42/45 carb on Twin Cam 74.95 •Self-contained breather system •6061 T-6 aircraft aluminum construction •Breathing is routed through the unit and into the throat of the carburetor track; minimizes oil in the intake tract •Fits Harley-Davidson and Buell models with CV carb or Delphi EFI •Chrome finish •Uses factory breather bolts •O-rings, gasket and mounting screws included PART # DESCRIPTION 1011-0529 For 91-06 XL models 1011-0530 For 92-99 Evolution 1011-0531 For 99-09 Twin Cam (except 08-09 Dressers) SUG. RETAIL $192.95 192.95 192.95 HANDLEBARS, CONTROLS & MIRRORS DEVONATOR SERIES CRANKCASE BREATHER •Competition style, brushed billet aluminum breather designed to follow the contour of the heads •Vents atmospherically through a hose barb in the back of the unit •Design efficiency virtually eliminates both oil in the air cleaner box and nagging oil consumption associated with standard vented breathers •Requires 1/2” i.d. breather hose PART # DESCRIPTION SUG. RETAIL and carb support bracket DS-289116 For 91-09 XL models $149.95 •Made in the U.S.A. CABLES BRAKES TANKS & OIL FILTERS 1012-0102 1012-0100 1012-0097 1012-0101 DASHES & GAUGES FRAMES, SUSPENSION & FENDERS 1012-0099 FOOTRESTS & LICENSE SUPPORT BRACKET CRANKCASE PLATE FRAMES BREATHER CONVERSION KIT •Adapts to all Wimmer intakes to eliminate external breathers TIRES, •Internal passageways route oil back to carb or throttle body TUBES & •Twin Cam applications re-use existing breather bolts; Evolution applications include new breather bolts WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 356 NOTE: For use with Wimmer intakes only PART # DESCRIPTION 1012-0100 For 99-09 Twin Cam motors using a CV carb/Delphi EFI and Wimmer intake (except 08 Dressers) 1012-0101 For 99-06 Twin Cam motors using a Mikuni carb and Wimmer intake 1012-0102 For 99-06 Twin Cam motors using a S&S carb and Wimmer intake 1012-0098 SUG. RETAIL $88.95 108.95 93.95 PART # DESCRIPTION 1012-0097 For 93-99 Evolution motors using a CV carb and Wimmer intake 1012-0098 For 93-99 Evolution motors using a Mikuni carb and Wimmer intake 1012-0099 For 93-99 Evolution motors using a S&S carb and Wimmer intake All part numbers in BOLD MAGENTA are new for 2009. SUG. RETAIL $134.95 153.95 139.95 SECTION 1012-0089 7807-0013 1012-0092 6 WINDSHIELDS TOURING CARB SUPPORT BRACKET/ BREATHER KITS •Billet aluminum construction with a chrome, black or wrinkle-black finish •Clean, one-piece design support bracket and breather kit •Crankcase breathes back into the carb or throttle body so no external lines are necessary •Allow custom air cleaners or velocity stacks to be installed in a horizontal or vertical position; no other adapters are required •Include installation hardware PART # DESCRIPTION SUG. RETAIL 93-09 BIG TWIN 1012-0095 08-09 FLHT, FLHR models, chrome $247.95 7807-0012 40mm CV carb or Delphi EFI (01-09 FXST, FLST, 04-09 Dyna Glide and 02-07 FLT), chrome 166.95 1012-0089 40mm CV carb or Delphi EFI (01-09 FXST, FLST, 166.95 04-09 Dyna Glide and 02-07 FLT), black 1012-0090 40mm CV carb or Delphi EFI (01-09 FXST, FLST, 166.95 04-09 Dyna Glide and 02-07 FLT), wrinkle black S&S E or G carb, chrome 172.95 7807-00131 LUGGAGE 7807-0014 SEATS & SISSY BARS 1012-0093 PART # DESCRIPTION 93-09 BIG TWIN (CONT) 1012-00911 S&S E or G carb, black 1012-00921 S&S E or G carb, wrinkle black 93-99 EVOLUTION BIG TWIN 7807-0014 Mikuni 42/45/48 carb, chrome 1012-0093 Mikuni 42/45/48 carb, black 1012-0094 Mikuni 42/45/48 carb, wrinkle black 1 SUG. RETAIL $172.95 172.95 EXHAUST 197.95 197.95 197.95 FUEL/AIR SYSTEMS Not for 100” S&S motors. ENGINE CARB SUPPORT BRACKET WITH BREATHER SYSTEM •Billet aluminum with chrome finish •Clean, one-piece design support bracket with internal breather system •Crankcase breathes back into the carb or throttle body so no external lines are necessary •Accepts most CV/Delphi EFI-style air cleaners •Includes installation hardware PART # DESCRIPTION FOR 93-09 BIG TWIN (EXCEPT 08-09 DRESSER) 1012-0079 For S&S E/G carb, Evolution 1012-0080 For S&S E/G carb, Twin Cam 1012-0081 For CV carb, Evolution 1012-0082 For CV carb/Delphi EFI Twin Cam 1012-0083 For Mikuni HSR 42mm, Evolution 1012-0084 For Mikuni HSR 42mm, Twin Cam TRANSMISSION & DRIVELINE CHROME CRANKCASE BREATHER 1012-0081 SUG. RETAIL $304.95 304.95 304.95 304.95 304.95 304.95 •With this breather, as oil-laden air condenses in the breather body, the excess oil now runs back down into the engine rather than into the air cleaner •A really clean setup PART # DESCRIPTION 1012-0073 For 99-06 Twin Cam w/ C.V. carb 1012-0072 For 93-99 Evolution Big Twin GASKETS & SEALS SUG. RETAIL $59.95 59.95 ELECTRICAL LIGHTING 2110-0316 HANDLEBARS, CONTROLS & MIRRORS CABLES DS-289620 CRANKCASE BREATHER KIT •Maximum efficiency in crankcase ventilation •Bolts directly to carburetor/brace; no exposed filter •For CV/HSR42 carbs PART # DESCRIPTION DS-289147 93-99 80” Big Twin, 91-06 XL CRANKCASE BREATHER KIT BRAKES •One-piece chrome tube design •Comes with breather bolts, washers and hardware •Works with most aftermarket air cleaners SUG. RETAIL $26.95 PART # DS-289620 2110-0316 DESCRIPTION For 93-07 Big Twin For 91-09 XL SUG. RETAIL $32.95 29.95 TANKS & OIL FILTERS DASHES & GAUGES DS-289060 FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES DS-289082 1013-0030 TIRES, TUBES & WHEELS CRANKCASE BREATHER/ SUPPORT BRACKET KITS •Kit allows the installation of aftermarket air cleaner assemblies on late model bikes equipped with OEM CV carb or Delphi EFI system •Includes bracket, filter, hose and all mounting hardware necessary for installation except where noted PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION DS-289082 Fits all 93-09 Big Twin models (except 08-09 Dressers) $64.95 DS-289126 Fits 91-06 XL models DS-289060 Fits 93-09 Big Twin models (no hose or filter) DS-289073 Repl. filter (except 08-09 Dressers) 54.95 1013-0030 Fits 07-09 XL models 58.95 All part numbers in BOLD MAGENTA are new for 2009. SUG. RETAIL $58.95 12.95 HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 357 SECTION 6 WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST AIR CLEANER BREATHER KIT BRAIDED HOSE CRANKCASE BREATHER KIT •Enables the mounting of most aftermarket air cleaners to late-style engines that breathe through the cylinder heads •Fittings can be rotated 360° so that hoses can be routed as necessary •Hose sold separately PART # DESCRIPTION DS-289055 For 93-09 Big Twin and 91-09 XL models •This kit provides the best looking alternative to black rubber hoses when mounting a crankcase breather system •Features a 3/8” i.d. stainless steel braided hose crimped onto chrome banjo fittings •Outlet side of assembly is long enough to custom-route the hose and mount the breather filter in an inconspicuous location •Includes breather filter (with mounting stud), hardware and instructions •Air cleaner and carb support bracket must be purchased separately FUEL/AIR SYSTEMS SUG. RETAIL $45.95 NOTE: Not recommended for stock applications. Make sure the braided line does not contact anything, i.e. the gas tank, carb or wiring, as damage may result. PART # DESCRIPTION SUG. RETAIL DS-289118 For 93-09 Big Twin custom applications only $66.95 1012-0019 1012-0016 BREATHER BOLT KITS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING 31/4” CUT-TO-LENGTH CHROME BREATHER BOLT KITS •Solve the problem when mounting a carb support bracket •Available in two styles and three sizes •Sold in pairs SUG. PART # DESCRIPTION RETAIL PART # DESCRIPTION POINTED BUTTONHEAD 1/2”-13 1/2”-13 1012-0014 $67.95 1012-0017 3/8”-16 3/8”-16 67.95 1012-0018 1012-0015 5/16”-18 5/16”-18 1012-0016 67.95 1012-0019 SUG. RETAIL $67.95 67.95 67.95 •Chrome-plated button-head bolts fit most support brackets and breathers •Kit for 93-99 Evolution-style engines comes with two 1/2”-13 x 13/4” bolts, four thick aluminum washers and four stainless steel washers •Kit for 99-09 Twin Cam-style engines comes with two 3/8”-16 x 13/4” coarse-thread bolts, six stepped aluminum washers and four stainless steel washers •Made in the U.S.A. PART # DESCRIPTION 1012-0038 For 93-99 Evolution 1012-0039 For 99-09 Twin Cam TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS DS-289611 DS-289612 BREATHER BOLT KITS •Designed specifically for Novello velocity stacks with one-piece support and breather •Kits include two chrome spacers, two stainless steel polished bolts and six shims •Give a clean, open look to the carb HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 358 DS-289610 CUSTOM BREATHER BOLTS PART # DESCRIPTION SUG. RETAIL 1012-0009 1/2” Evolution bolt kit for S&S/CV carbs (2.5” long) $79.95 1012-0010 5/16” Twin Cam bolt kit for S&S/CV carbs (2.5” long) 79.95 FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS SUG. RETAIL $39.95 49.95 1012-0009 CABLES BRAKES 1012-0039 DS-289614 DS-289613 HANDLEBARS, CONTROLS & MIRRORS 1012-0038 •CNC-machined 17/16” polished stainless steel bolts •Fit most support brackets and breathers •Sold in pairs with washers •Replacement washers available separately PART # DESCRIPTION SUG. RETAIL 5/16” TWIN CAM BOLTS DS-289611 Hex head $36.95 DS-289613 Button head 36.95 DS-289614 Repl. washers (10-pk.) 6.95 PART # DESCRIPTION 1/2” EVOLUTION BOLTS DS-289610 Hex head DS-289612 Button head DS-289614 Repl. washers (10-pk.) SUG. RETAIL $36.95 36.95 6.95 SPECIALTY BREATHER BOLTS WITH BOLT STANDS 1012-0003 •High-quality CNC-machined stainless steel bolts •Unique 3/4” long threaded bolt standoff (machined into the bolt head) provides a secure mounting bracket attachment point for accessories off the cylinder head breather outlets •When used with spacers (not included) an infinite range of locations can be adapted between the air cleaner backplate and cylinder heads •Package includes two breather bolts, two 3/8” button head bolts, two flat washers and eight nylon washers PART # DESCRIPTION SUG. RETAIL 1/2” 1012-0003 For 93-99 Evolution $44.95 5/16” 1012-0004 For 99-09 Twin Cam 44.95 All part numbers in BOLD MAGENTA are new for 2009. SECTION 6 WINDSHIELDS THREAD REDUCER •Used on 93-99 H-D cylinder heads when installing a carburetor support bracket that requires 5/16”-18 mounting bolts •Reduces a 1/2”-13 threaded hole to 5/16”-18 •Sold each; two required per motor •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1/2”-13 to 5/16”-18 7806-2940 thread reducer $5.95 TOURING THREAD REDUCER BREATHER BOLT WASHER KIT •Converts an Evo motor (1/2”-13 thread pitch) to fit any Wimmer intake that is listed for a Twin Cam motor (3/8”-16 thread pitch) •Sold each; two required per motor PART # DESCRIPTION SUG. RETAIL 1012-0096 1/2”-13 thread reducer $11.95 •Features four 5/16” and four 1/2” aluminum centering washers •Also includes four nylon sealing washers PART # DESCRIPTION SUG. RETAIL 1012-0005 For 91-09 breather systems $7.95 LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS BREATHER SHOP SERVICE KIT •Includes all gaskets, seals and O-ring to service OEM breather systems •Made in the U.S.A PART # DESCRIPTION SUG. RETAIL 0934-0942 Breather service kit $9.95 ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS DS-289190 DS-289053 ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1013-0017 DS-289062 CABLES BRAKES AIR CLEANER BRACES CARB SUPPORT BRACKET WITH CHOKE CABLE MOUNT •Chrome-plated stamped steel •Provides support for carb and air cleaner •Offers mounting of choke control under the carb for easy access PART # DESCRIPTION 2110-1212 For 92-06 Big Twin w/ Mikuni HSR 42/45 carb SUG. RETAIL $29.95 •Chrome air cleaner braces provide additional support for the Dragtron™ II air cleaners or any flat-backed air cleaners •Mount to the cylinder heads •Can be used in conjunction with most breather kits (where applicable) •Breather kits/bolts sold separately •All gaskets and mounting hardware included •For replacement gaskets see Gaskets & Seals section PART # DESCRIPTION SUG. RETAIL DS-289190 For 90-09 Big Twin (except 08-09 Dressers) (CV carb/Delphi EFI.) $29.95 DS-289053 For 84-89 Big Twin Evolution (butterfly carb.) 24.95 1013-0017 For 07-09 XL 24.95 DS-289062 For 88-06 XL 24.95 AIR CLEANER BRACES FOR SHOVELHEAD, XL ADJUSTABLE CARBURETOR SUPPORT BRACKET •Adjusts from 51/4” to 63/8” •Mounts from the center case bolt between cylinders to the lower flange mount of the manifold •Made in the U.S.A. PART # DESCRIPTION 160471 Support bracket SUG. RETAIL $15.95 •Use with our Dragtron™ air cleaners to eliminate carb vibration, which can lead to air leaks •Includes hardware and template •Must use either DS-289104 block or OEM insulator •Chromed steel support braces fit models equipped with Bendix or Keihin carbs PART # DESCRIPTION DS-289092 Air cleaner brace for 66-84 Shovelhead DS-289094 Air cleaner brace for 57-85 XL All part numbers in BOLD MAGENTA are new for 2009. DS-289094 TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS DS-289092 SUG. RETAIL $9.95 9.95 HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 359 SECTION 6 WINDSHIELDS 1015-0086 TOURING DRAG SPECIALTIES DESIGN AIR CLEANERS LUGGAGE 1015-0104 •Chrome air cleaner kit with spear- or twister-style cone designed exclusively for Drag Specialties •Increases airflow approximately 10% more than an OEM air cleaner •Includes filter cone with 360° slots, K&N air filter, 90° chrome elbow and installation hardware •Will accept D&M Bullet replacement cones •Requires the use of a carb support bracket and breather kit (sold separately) •Optional adapters allow mounting on various carbs and Magneti fuel-injection systems PART # DESCRIPTION SUG. RETAIL FOR 90-06 BIG TWIN AND 88-06 XL WITH 40MM CV CARB OR 01-09 DELPHI EFI (EXCEPT 08-09 DRESSERS) 1015-0086 Drag Specialties Spear air cleaner $489.95 1015-0104 Drag Specialties Twister air cleaner 538.95 7807-0018 Repl. air filter 70.95 SEATS & SISSY BARS EXHAUST 7807-0016 7807-0017 FUEL/AIR SYSTEMS 1015-0062 ENGINE 1015-0061 TRANSMISSION & DRIVELINE 1015-0067 GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES 1015-0071 1015-0066 THE BULLET AIR CLEANERS •Chrome air cleaner with a bullet-shaped cone with slots in 180° or 360° style •Increases airflow approximately 10% more than an OEM air cleaner •Includes bullet-shaped filter cone, K&N air filter, 90° elbow and installation hardware •Available with black or chrome elbow •Diamond-cut cones also available; scalloped design •Requires the use of a carb-support bracket and breather kit (sold separately) 1015-0074 FOR 90-06 BIG TWIN AND 88-06 XL WITH 40MM CV CARB OR 01-09 DELPHI EFI (EXCEPT 08-09 DRESSERS) PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION WITH CHROME ELBOW WITH BLACK ELBOW 7807-0016 Chrome cone, 180° slots $489.95 7807-0015 Chrome cone, 360° slots 7807-0017 Chrome cone, 360° slots 489.95 1015-0065 Wrinkle black cone, 360° slots 1015-0060 Red cone, 360° slots 489.95 1015-0066 Black cone, 360° slots 1015-0061 Green cone, 360° slots 489.95 1015-0072 Wrinkle black diamond-cut cone, 360° slots 1015-0062 Blue cone, 360° slots 489.95 1015-0073 Black diamond-cut cone, 360° slots 1015-0064 Black cone, 360° slots 483.95 REPLACEMENT/OPTIONAL CONES AND FILTER 1015-0067 Red diamond-cut cone, 360° slots 594.95 1015-0074 Chrome cone, 360° slots 1015-0068 Green diamond-cut cone, 360° slots 594.95 1015-0081 Red diamond-cut cone, 360° slots 1015-0069 Blue diamond-cut cone, 360° slots 594.95 7807-0018 Repl. air filter 1015-0071 Black diamond-cut cone, 360° slots 594.95 1015-0081 SUG. RETAIL $489.95 489.95 489.95 594.95 594.95 288.95 378.95 70.95 BRAKES DS-289544 TANKS & OIL FILTERS 1015-0106 DS-289543 1015-0017 DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 360 1015-0107 POWER FLOW AIR CLEANERS •Provides the latest look and performance of forward-style intake systems 1015-0025 1015-0026 •Increases airflow approximately 20% more than an OEM air cleaner •Can be installed horizontally or vertically when using a 3.5-gallon Fat Bob or smaller fuel tank; vertical adapter sold separately •Requires carburetor support bracket and breather kit; sold separately •Includes a CNC-machined billet filter cone with tapered, straight, Vindicator or Superslot slots, a 90° elbow, K&N air filter, gasket, hardware and wrench •Replacement/optional cones available with straight or tapered slots •Diamond-cut cones also available; feature unique diamond-cut design on the edges of the slot openings •Optional adapters allow mounting on various carbs and Magneti fuel-injection systems FOR 90-06 BIG TWIN AND 88-06 XL WITH 40MM CV CARB OR 01-09 DELPHI EFI (EXCEPT 08-09 DRESSERS) PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION WITH CHROME ELBOW WITH CHROME ELBOW (CONT) 1015-0106 Chrome cone, Vindicator $489.95 1015-0017 Green cone, tapered slots 1015-0107 Chrome cone, Superslot 489.95 1015-0019 Wrinkle black cone, tapered slots DS-289544 Chrome cone, straight slots 489.95 1015-0020 Black cone, tapered slots 1015-0011 Blue cone, straight slots 489.95 1015-0023 Red diamond-cut cone, straight slots 1015-0013 Black cone, straight slots 489.95 1015-0025 Blue diamond-cut cone, straight slots DS-289543 Chrome cone, tapered slots 489.95 1015-0026 Wrinkle black diamond-cut cone, straight slots All part numbers in BOLD MAGENTA are new for 2009. SUG. RETAIL $489.95 489.95 489.95 594.95 594.95 594.95 SECTION 6 WINDSHIELDS POWER FLOW AIR CLEANERS (CONT) 1015-0030 TOURING 1015-0021 DS-289546 LUGGAGE 1015-0027 1015-0036 1015-0014 FOR 90-06 BIG TWIN AND 88-06 XL WITH 40MM CV CARB OR 01-09 DELPHI EFI (EXCEPT 08-09 DRESSERS) (CONT) PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION WITH CHROME ELBOW (CONT) WITH BLACK ELBOW (CONT) 1015-0027 Black diamond-cut cone, straight slots $594.95 1015-0022 Black cone, tapered slots 1015-0030 Red diamond-cut cone, tapered slots 594.95 1015-0028 Wrinkle black diamond-cut cone, straight slots 1015-0032 Blue diamond-cut cone, tapered slots 594.95 1015-0029 Black diamond-cut cone, straight slots 1015-0034 Black diamond-cut cone, tapered slots 594.95 1015-0035 Wrinkle black diamond-cut cone, tapered slots WITH BLACK ELBOW 1015-0036 Black diamond-cut cone, tapered slots DS-289546 Chrome cone, straight slots 489.95 REPLACEMENT/OPTIONAL CONES AND FILTER 1015-0014 Wrinkle black cone, straight slots 489.95 1015-0037 Chrome cone, straight slots 1015-0015 Black cone, straight slots 489.95 1015-0043 Chrome cone, tapered slots DS-289545 Chrome cone, tapered slots 489.95 DS-289549 Repl. air filter 1015-0021 Wrinkle black cone, tapered slots 489.95 1015-0037 SUG. RETAIL $489.95 594.95 594.95 594.95 594.95 288.95 288.95 70.95 SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE 7807-0011 GASKETS & SEALS 1015-0092 7807-0010 ELECTRICAL MINI POWER FLOW AIR CLEANERS 1015-0088 •Same great features as the Power Flow air cleaners except smaller •Increases airflow approximately 10% more than OEM air cleaners •Works great on FLT models with lowers •Available in tapered-slot style with a chrome or black elbow •Includes a CNC-machined, chrome billet filter cone, 90° elbow, K&N filter and installation hardware •Requires the use of a carb support bracket and breather kit (sold separately) PART # DESCRIPTION SUG. RETAIL FOR 90-06 BIG TWIN AND 88-06 XL WITH CV CARB OR 01-09 DELPHI EFI (EXCEPT 08-09 DRESSERS) 7807-0010 Black elbow $489.95 7807-0011 Chrome elbow 489.95 7807-0018 Repl. air filter 70.95 1012-0013 LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1015-0090 FORWARD-FACING CARB AIR CLEANERS •Bullet and Power Flow air cleaners with chrome cones for forward-facing carbs •Bullet increases airflow approximately 10% higher than OEM air cleaners •Power Flow increases airflow 20% higher than OEM air cleaners CABLES NOTE: Support bracket and breather kit sold separately. PART # FOR S&S SINGLE CARBS 1015-0088 1015-0090 1015-0092 DESCRIPTION SUG. RETAIL Power Flow w/ straight slots Power Flow w/ tapered slots Bullet w/ 360° slots $332.95 332.95 332.95 BRAKES TANKS & OIL FILTERS DASHES & GAUGES DS-289547 FRAMES, SUSPENSION & FENDERS 1012-0011 FOOTRESTS & LICENSE PLATE FRAMES 1015-0108 1015-0109 HUSTLER AIR CLEANERS HS42/001-K AIR CLEANER ADAPTERS •For D&M Power Flow, Bullet, Hustler and Drag Specialties air cleaners PART # DESCRIPTION SUG. RETAIL OPTIONAL ADAPTERS 1012-0011 S&S Super D carburetor (vertical or horizontal) $100.95 233.95 1012-0013 Magneti Twin Cam fuel-injection system (horizontal) 7807-0118 S&S E and G carburetor (vertical or horizontal) 41.95 HS42/001-K Mikuni carburetor (horizontal) 18.95 DS-289547 40mm CV carburetor (vertical) 39.95 •Increases airflow approximately 10% more than an OEM air cleaner and increases air velocity •Requires carburetor support bracket and breather kit; sold separately •Includes a CNC-machined billet cover, Maltese cross or slotted insert, a 90° elbow, K&N air filter, gasket, hardware and wrench •Optional adapters allow mounting on various carbs and Magneti fuel-injection systems PART # DESCRIPTION FOR 90-06 BIG TWIN AND 88-06 XL WITH 40MM CV CARB OR 01-09 DELPHI EFI (EXCEPT 08-09 DRESSERS) 1015-0108 W/ Maltese cross insert 1015-0109 W/ slotted insert All part numbers in BOLD MAGENTA are new for 2009. TIRES, TUBES & WHEELS SUG. RETAIL HARDWARE, CHEMICALS & TOOLS $547.95 547.95 COVERS, SECURITY & GENERAL 361 SECTION 6 WINDSHIELDS 1010-0129 TOURING 1010-0209 1011-0888 LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS SPIKE AIR INTAKES •Quality billet construction and a hot design •Greater airflow over stock applications •Superior strength and a show-quality chrome finish •Internal filter is easily accessible for cleaning •Mikuni adapter converts Wimmer Spike intakes for 99-06 Twin Cam with CV carbs to fit 99-06 Twin Cam with HSR Mikuni carbs •Made in the U.S.A. PART # DESCRIPTION 1010-0126 For S&S E and G series, 92-99 80” Big Twin, and S&S 96”, 107” and 113” motors 1010-0127 For Mikuni 42/45/48, 92-99 80” Big Twin 1010-0128 For 99-07 CV/ Delphi EFI, Twin Cam SUG. RETAIL $725.95 725.95 725.95 PART # 1010-0129 1011-0888 1010-0209 DESCRIPTION SUG. RETAIL For S&S E and G series, S&S 111”/117”/124” motors $725.95 Replacement filter for all Spike air intakes 61.95 Mikuni adapter 73.95 1010-0201 ENGINE 1010-0057 TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING 90° SUPER FILTER INTAKE •Chrome-plated aluminum support bracket and breather system •Patented, washable breather filters •Air filter provides 236 sq. in. of filtering surface •Can be mounted in a horizontal or vertical position •Mikuni adapter converts Wimmer Super Filter intakes for 99-06 Twin Cam with CV carbs to fit 99-06 Twin Cam with HSR Mikuni carbs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1010-0057 For HSR Mikuni, 92-99 80” Big Twin $520.95 1010-0058 For S&S E and G series, 92-99 80” Big Twin, and S&S 96”, 107” and 113” motors 520.95 1010-0201 For S&S E and G series, S&S 111”/117”/124” motors 520.95 1011-0887 1010-0209 PART # 1010-0059 1011-0887 1010-0209 DESCRIPTION For 99-07 CV/ Delphi EFI, Twin Cam Replacement filter for all Super filter intakes Mikuni adapter SUG. RETAIL $520.95 75.95 73.95 HANDLEBARS, CONTROLS & MIRRORS CABLES MINI-MAX INTAKE BRAKES TANKS & OIL FILTERS •Features a chrome-plated aluminum support brace and breather system •Patented washable breather filters included 1010-0051 •Air filter provides 252 sq. in. of waterproof filtering surface •Mikuni adapter converts Wimmer Mini-Max intakes for 99-06 Twin Cam with CV carbs to fit 99-06 Twin Cam with HSR Mikuni carbs •Made in the U.S.A. 1011-0886 1010-0209 NOTE: Not recommended for motors over 96” DASHES & GAUGES FRAMES, SUSPENSION & FENDERS NOTE: Applications listed will not fit S&S 111”, 117” or 124” motors. PART # 1010-0051 1010-0052 DESCRIPTION For HSR Mikuni, 92-99 80” Big Twin For S&S E and G series, 92-99 80” Big Twin, and S&S 96” motors FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 362 SUG. RETAIL $416.95 416.95 PART # 1010-0053 1011-0886 1010-0209 DESCRIPTION For 99-07 CV/ Delphi EFI, Twin Cam Replacement filter for all Mini-Max air intakes Mikuni adapter SUG. RETAIL $416.95 55.95 73.95 1010-0122 NESS-TECH® 90° AIR FILTERS •Carved from billet aluminum and then beautifully chrome-plated •Feature patented “Big Sucker” breather technology 1010-0120 SUG. RETAIL PART # DESCRIPTION 1010-0120 For Evolution and Twin Cam motors w/ CV carb or 01-05 Delphi EFI $302.95 PART # DESCRIPTION 1010-0121 For 107” and under S&S motors w/ S&S carb SUG. RETAIL PART # DESCRIPTION 1010-0122 For 111”-124” S&S motors w/ S&S carb (except 113”) $302.95 All part numbers in BOLD MAGENTA are new for 2009. SUG. RETAIL $302.95 SECTION 6 WINDSHIELDS 2110-6969 DS-288764 TOURING 1010-0239 LUGGAGE 1010-0241 DOMINATOR AND DOMINATOR XL FORCEWINDER KITS •Air intake kits include a polished Dominator breather bracket, Forcewinder polished air intake manifold, K&N filter, black pre-filter sock and all necessary hardware •Pro series models also include a Force Pro Series Billet air filter DOMINATOR FOR BIG TWINS PART # DESCRIPTION SUG. RETAIL FOR 92-99 EVOLUTION BIG TWIN W/ CV CARB 1010-0239 Dominator $412.95 1010-0241 Dominator pro 524.95 FOR 92-99 EVOLUTION BIG TWIN W/ MIKUNI 42/45/48 CARB 1010-0242 Dominator 503.95 1010-0244 Dominator pro 576.95 FOR 92-99 EVOLUTION BIG TWIN W/ S&S E/G CARB 1010-0246 Dominator 503.95 1010-0247 Dominator pro 576.95 FOR 99-06 TWIN CAM W/ CV CARB & 01-09 TWIN CAM W/ DELPHI EFI (EXCEPT 08-09 DRESSER) 1010-0248 Dominator 412.95 1010-0249 Dominator pro 524.95 FOR 99-06 TWIN CAM W/ MIKUNI 42/45/48 CARB 1010-0250 Dominator 503.95 1010-0251 Dominator pro 576.95 FOR 99-06 TWIN CAM W/ S&S E/G CARB 1010-0252 Dominator 503.95 1010-0253 Dominator pro 576.95 DOMINATOR XL FOR SPORTSTER PART # DESCRIPTION FOR 88-06 SPORTSTER W/ CV CARB 1010-0254 Dominator 1010-0255 Dominator pro FOR 86-06 SPORTSTER EVO W/ MIKUNI 42/45/48 CARB 1010-0256 Dominator 1010-0257 Dominator pro FOR 86-06 SPORTSTER W/ S&S E/G CARB 1010-0258 Dominator 1010-0259 Dominator pro SUG. RETAIL $412.95 524.95 503.95 576.95 503.95 576.95 2110-1913 FORCEWINDER XR-2 AIR CLEANER/BREATHER KITS •Second generation Forcewinder kits •99-06 Twin Cam carburetor models, 01-06 Delphi fuel-injected models include a 90° cast elbow, cone-shaped air filter, dry sock, mounting hardware and breather line kit that feeds back into the air cleaner (requires support bracket PART #DS-289190 for Big Twin and PART #DS-289062 for XL models; must be purchased separately) •95-01 FLT models include a 90° cast elbow, cone-shaped air filter, dry sock, support bracket, mounting hardware and a breather line that feeds back into the air cleaner •Optional adapter kits allow mounting of systems to S&S or Mikuni carbs •Made in U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 99-06 TWIN CAM CARBURETED MODELS DS-288763 Polished $341.95 DS-288764 Black 406.95 FOR 01-09 FXST/FLST; 04-09 FXD/FXDWG AND 02-07 FLT FUEL-INJECTED MODELS DS-288763 Polished 341.95 DS-288764 Black 406.95 2110-1914 Wrinkle black 406.95 FOR 92-99 80” EVOLUTION CARBURETED MODELS DS-288760 Polished 341.95 DS-288761 Black 406.95 FOR 99-01 FLT FUEL-INJECTED MODELS 2110-6969 Polished 319.95 FOR 91-06 XL AND 95-02 BUELL (CARB) MODELS DS-288769 Polished 341.95 DS-288779 Black 427.95 FOR 99-02 FUEL-INJECTED BUELL MODELS DS-288766 Polished 362.95 DS-288767 Black 429.95 REPLACEMENT COMPONENTS 1011-0006 Short XR-2 air filter (3.25” long) 73.95 1011-0007 Repl. Force air filter for V-Rods 73.95 DS-288791 Repl. Force air filter 73.95 DS-288792 Repl. Force air dry charger sock 32.95 FORCEWINDER PRO BILLET SERIES AIR FILTER EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES •Patterned after the Original Forcewinder air filter •Comes pre-oiled and ready for installation •Made from billet aluminum with a polished finish •Fits XR air intake systems only PART # DESCRIPTION 1011-0896 Pro billet series air filter TANKS & OIL FILTERS SUG. RETAIL $151.95 DS-288922 FORCEWINDER XR AIR INTAKE SYSTEMS •Kit includes 90° cast aluminum elbow, K&N air filter, black dry charger sock, K&N crankcase breather filter, 3/16” Allen screws, intake gasket, cable ties, a 30” vent hose and instructions •Requires the use of carburetor-support bracket/breather kit (sold separately) •Optional adapter kits allow mounting of systems to S&S or Mikuni carbs •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 90-06 BIG TWIN/XL MODELS W/ 40MM CV CARB, 01-09 BIG TWIN AND 07-09 XL W/ DELPHI EFI (EXCEPT 08-09 DRESSERS) 2110-1913 Wrinkle black $263.95 DS-288923 Black 263.95 DS-288922 Polished 219.95 FOR 97-02 M2, 95-96 S2, 96-98 S1, S1W AND 96-98 S3 BUELL MODELS W/ 40MM CV CARBURETORS DS-288913 Polished 245.95 DS-288914 Black 282.95 REPL. COMPONENTS DS-289239 Repl. air filter 73.95 DS-288792 Dry charger sock 32.95 SEATS & SISSY BARS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS 2104-1904 2104-1902 FORCEWINDER AIR CLEANER ADAPTERS •Used to mount Forcewinder XR/Forcewinder XR-2 air cleaners to S&S E and G carburetors and Mikuni HSR 42/45/48mm carburetors •Carb to air cleaner gasket (5-pk) is available separately; PART #DS-173249 •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR S&S E AND G CARBS 2104-1904 Polished adapter $59.95 DS-288921 Natural adapter 37.95 FOR HSR MIKUNI CARBS 2104-1902 Fits 42/45mm carb (polished) 59.95 2104-1903 Fits 48mm carb (polished) 59.95 All part numbers in BOLD MAGENTA are new for 2009. FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 363 SECTION 6 1010-0152 WINDSHIELDS 1010-0345 TOURING 1010-0344 LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS CORSAIR AIR CLEANER KITS •Aggressively styled, free-flowing high-performance air cleaner •Chrome-plated die-cast housing features a high-flow air filter element supplied by Advanced Flow Engineering (aFe) for maximum performance, includes crankcase breather support bracket and all necessary installation hardware and brackets •Will support engines making in excess of 100 horsepower •Air cleaner extends approximately 6” straight out and 121/2” forward of the engine •PART #1010-0345 is a Corsair assembly (CV bolt pattern) for use with custom adapters, brackets, etc. for custom installation on models for which a complete kit is not offered NOTE: Installation of this air cleaner may decrease rider legroom. PART # DESCRIPTION SUG. RETAIL 1010-0344 For 93-99 Evolution Big Twin w/ CV carb, 99-09 Twin Cam w/ CV carb or Delphi fuel injection (except 08-09 FLHT, FLHR and FLTR) $319.95 1010-0343 For 91-06 XL w/ CV carb 319.95 1010-0345 Corsair air cleaner assembly only 289.95 1011-1380 Repl. air filter element 59.95 1011-1381 Repl. pre-filter element 29.95 1010-0220 HI-FIVE AIR CLEANER KITS •A high-performance line of inhaler air cleaners from Küryakyn •Five-spoke, tiered and slotted design enhances looks and performance •Die-cast construction •Large slotted openings enhance airflow •Exclusive K&N air filter design passes air through sides and outer end •Backing plate design minimizes air disturbance as it enters the carburetor or throttle body •Snap-in rings cover carb fasteners; radius of the inside edge of the cleaner is flow-bench tested for optimal airflow •Threaded ports on the backing plate provide convenient locations to connect crankcase breathers or float bowl vents if needed (plugs and fittings included) •Measures approximately 7” in diameter 1010-0338 and 3” thick PART # DESCRIPTION CHROME 1010-0152 For 99-06 Twin Cam w/ CV carb or 01-09 Delphi EFI (except 08-09 FLHT, FLHR, FLTR and FLHX) 1010-0153 For 93-99 Evolution Big Twin w/ CV carb 1010-0154 For 91-06 XL w/ CV carb WRINKLE BLACK 1010-0338 For 93-99 Evolution Big Twin w/ CV carb 1010-0221 SUG. RETAIL $219.95 219.95 219.95 239.95 1010-0217 PRO R HYPERCHARGER™ ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES SKULL AIR CLEANER KITS •Extremely rigid, high-strength composite construction •Includes chrome outer cover, backing plate, high-flow air filter element and all necessary brackets, crankcase breathers and other required hardware included •PART # 1010-0221 is an assembly (CV bolt pattern) that can be used with adapters, brackets or mount kits to cover applications for which a complete kit is not available •Sold each PART # DESCRIPTION SUG. RETAIL 1010-0220 For 99-09 Twin Cam w/ CV carb or Delphi EFI (except 08-09 FLHT, FLHR and FLTR) $239.95 1010-0219 For 93-99 Evolution Big Twin w/ CV carb 239.95 1010-0218 For 91-06 XL models w/ CV carb 239.95 1010-0221 Skull air cleaner assembly only 199.95 DS-288938 DS-288938 FOOTRESTS & LICENSE PLATE FRAMES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 364 PRO SERIES HYPERCHARGER™ •Features a 50% larger air filter for massive airflow •Internal shape has been modified to allow increased airflow and velocity •One-piece construction, ball-milled, “speed lines” symmetrical butterflies and new “Pro” embossed bearing cups •Edges of Pro Series Hypercharger are radiused for a more streamlined appearance •An upgrade kit is available for new-style (replaceable bearing cup) Hyperchargers and includes a new “Pro” outer case half, bearing cups, butterflies, large K&N air filter and necessary hardware FRAMES, SUSPENSION & FENDERS TIRES, TUBES & WHEELS DS-288939 •The best-flowing Hypercharger™ ever produced •Careful redesign of all interior shapes increases airflow •Additional air scoop on outer cover directs air onto the high-flow, washable and reusable air filter •Unrestricted air under high-load riding situations from huge front butterflies are vacuum operated •Include all necessary mounting hardware and crankcase breather kit •PART # 1010-0217 is an assembly (CV bolt pattern) that can be used with adapters, brackets or mounting kits to cover applications that do not have a specific kit PART # DESCRIPTION SUG. RETAIL 1010-0215 For 99-06 Twin Cam w/ CV carb and 06-09 w/ Delphi EFI (except 08-09 FLHT, FLHR and FLTR) $309.95 1010-0216 For 01-05 Twin Cam w/ Delphi EFI 309.95 1010-0214 For 93-99 Evolution Big Twin w/ CV carb 299.95 1010-0213 For 91-06 XL models w/ CV carb 299.95 1010-0217 Pro R cleaner assembly only 259.95 1011-1079 Repl. K&N air filter (ea.) 49.95 PART # 1010-0151 DS-288938 1010-0147 1010-0149 1010-0150 DS-288937 DS-288936 1010-0148 DS-288939 DESCRIPTION W/ chrome butterflies for 01-05 Twin Cam w/ Delphi EFI W/ chrome butterflies for 99-06 Twin Cam w/ CV carb, 06-09 Delphi EFI (except 08-09 FLHT, FLHR and FLTR) W/ black butterflies for 99-06 Twin Cam w/ CV carb, 06-09 Delphi EFI (except 08-09 FLHT, FLHR and FLTR) W/ chrome butterflies for 99-01 FLT (Dresser and Road King) w/ Magnetti-Marelli EFI W/ chrome butterflies for 95-98 FLT (Dresser and Road King) w/ Magnetti-Marelli EFI W/ chrome butterflies for 93-98 80” Evolution w/ CV carb W/ chrome butterflies for 91-06 XL w/ CV carb W/ chrome butterflies for custom applications (requires Küryakyn adapters, brackets and/or mounting kit) Upgrade kit All part numbers in BOLD MAGENTA are new for 2009. SUG. RETAIL $289.95 279.95 279.95 299.95 299.95 269.95 269.95 239.95 129.95 SECTION 6 WINDSHIELDS HYPERCHARGER™ AIR CLEANERS 1010-0156 LUGGAGE SEATS & SISSY BARS SUG. PART # DESCRIPTION RETAIL HYPERCHARGER WITH SMOOTH TRAP DOOR 1010-0156 W/ chrome butterflies for 99-06 Twin Cam w/ CV carb, 06-09 Delphi EFI (except 08-09 FLHTC, FLHT, FLHR, FLTR and FLHX ) $239.95 1010-0157 W/ chrome butterflies for 01-05 Twin Cam w/ Delphi EFI 269.95 1010-0136 W/ chrome butterflies for 93-99 Big Twin w/ S&S E or G series carb 269.95 1010-0139 W/ chrome butterflies for 93-99 Big Twin w/ stock carb and Screamin’ Eagle breather 219.95 1010-0140 W/ chrome butterflies for 93-99 Big Twin w/ stock carb 229.95 1010-0144 W/ chrome butterflies for 92 Big Twin w/ stock carb 219.95 1010-0143 W/ chrome butterflies for 90-91 Big Twin w/ stock carb 219.95 1010-0142 W/ chrome butterflies for 84-89 Big Twin w/ stock or S&S B series carb 219.95 1010-02291 W/ chrome butterflies for 66-84 pre-Evo Big Twin and XL w/ stock carb, S&S B series or QwikSilver II carb 199.95 1010-0155 W/ chrome butterflies for 95-98 Evolution Road King or Dresser w/ Magnetti-Marelli EFI 259.95 1010-0137 W/ chrome butterflies for 91-06 XL w/ stock carb and H-D breather 219.95 1010-0141 W/ chrome butterflies for 91-06 XL w/ stock carb 229.95 1010-0135 W/ chrome butterflies for 88-90 XL w/ stock carb 219.95 1010-0134 W/ chrome butterflies for 86-87 XL with stock or S&S B series carb 219.95 1010-0138 W/ metallic gray butterflies for 94-02 Buell w/ stock carburetor (requires mount kit 1010-0230) 189.95 HYPERCHARGER WITH BLOOD GROOVE TRAP DOOR DS-288845 W/ chrome butterflies for 99-01 FLTR, FLHT, FLHR w/ Magnetti-Marelli EFI 279.95 DS-288844 W/ chrome butterflies for 99-06 Twin Cam w/ CV carb, 06-09 Delphi EFI (except 08-09 FLHTC, FLHT, FLHR, FLTR and FLHX) 249.95 STINGER TRAP DOOR FOR HYPERCHARGER™ DESCRIPTION Stinger trap door (ea.) SUG. RETAIL $49.95 HYPER STREAMLINER •Gives your Hypercharger™ a whole new look •Beautifully designed insert installs in minutes without any performance loss •Fits all Hyperchargers (except Pro Series Hyperchargers) PART # 1014-0001 DESCRIPTION Hyper Streamliner PART # DESCRIPTION HYPERCHARGER WITH BLOOD GROOVE TRAP DOOR (CONT) 1010-0162 W/ chrome butterflies for 01-05 Twin Cam w/ Delphi EFI 1010-0161 W/ black butterflies for 99-06 Twin Cam w/ CV carb, 06-09 Delphi EFI (except 08-09 FLHT, FLHTC, FLHR, FLTR and FLHX) DS-288821 W/ chrome butterflies for 93-99 Evolution Big Twin w/stock carb DS-288822 W/ black butterflies for 93-99 Evolution Big Twin w/stock carb DS-288940 W/ chrome butterflies for 93-99 80” Evolution w/ S&S E & G carb DS-288823 W/ chrome butterflies for 91-06 XL models w/stock carb 1010-0163 W/ chrome butterflies for 91-06 XL w/ stock carb and Screamin’ Eagle crankcase breather DS-288824 W/ black butterflies for 91-06 XL models w/stock carb HYPERCHARGER ACCESSORIES DS-288827 Adapter to mount Hypercharger on S&S E and G carburetors for 93-99 Big Twin and 91-06 XL models (requires PART #DS-288826 adjustable enrichener and 1/2”-13 x 11/2” breather bolts) DS-288826 Adjustable enrichener for S&S E and G carbs on 93-99 Big Twin and 91-06 XL models 1010-0146 Chrome blood groove trap door 1010-0327 Candy red trap door 1010-0328 Candy blue trap door 1010-0329 Chrome trap door 1010-0347 Black trap door 1010-0330 Candy red butterflies 1010-0331 Candy blue butterflies 1010-0332 Chrome butterflies 1010-0348 Black butterflies DS-288825 Repl. K&N filter element for Hyperchargers listed above 1010-0230 Mount kit for 94-02 Buell w/ stock caburetor 1 SUG. RETAIL 259.95 SUG. RETAIL $36.95 259.95 289.95 259.95 229.95 259.95 39.95 19.95 23.95 17.95 17.95 19.95 17.95 13.95 13.95 13.95 13.95 42.95 49.95 ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS •Slots on both sides and enlarged openings at bottom of housing allow more air to enter the filter •Large, round breather element underneath cover allows air to enter the end of the filter •Teardrop center of cover provides improved airflow and a clean look •Internal crankcase vent system directs gasses and oil droplets into the carburetor induction module, eliminating a mess on the outside of the engine •The result is improved airflow for better performance •Carb adapter and replacement K&N air filter elements sold each •Available with a chrome finish All part numbers in BOLD MAGENTA are new for 2009. FUEL/AIR SYSTEMS 259.95 Requires drilling a hole in the Hypercharger back (and mounting bracket where applicable) for float bowl vent. PART # DESCRIPTION TWIN VELOCITY PLUS AIR CLEANERS 1010-0342 For 99-09 Twin Cam w/ stock CV carb or Delphi fuel inejction (except 08-09 FLHTC, FLHR, FLTR, FLHX) 1010-0341 For 93-99 Evolution Big Twin w/ stock CV carburetor 1010-0340 For 90-92 Evolution Big Twin w/ stock carburetor ACCESSORIES 1013-0023 Adapter for S&S carbs for 99-06 Twin Cam DS-289240 Adapter for S&S carbs for 90-99 Evolution Big Twin 1013-0022 Adapter for Mikuni HSR 42/54/48 carburetor for 93-08 Evolution or Twin Cam DS-288862 Repl. primary K&N filter element DS-288863 Repl. secondary K&N filter element EXHAUST $279.95 TWIN VELOCITY™ PLUS AIR CLEANER KITS •If you have a need for more performance, look no further •Stinger trap door maximizes airflow into the carburetor or throttle body through a high-flow filter element •Highly cost-effective way to boost airflow to any standard Hypercharger •Easy four-bolt replacement for standard trap door •Chrome finish PART # 1010-0145 TOURING DS-288821 •These air cleaners look great and work even better •Available with a standard (smooth) trap door or our Blood Groove design •Chrome-plated body and trapdoor with either chrome or black butterflies •Include Küryakyn’s breather where applicable DASHES & GAUGES FRAMES, SUSPENSION & FENDERS SUG. RETAIL $219.95 219.95 219.95 FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS 49.95 49.95 HARDWARE, CHEMICALS & TOOLS 39.95 46.95 9.95 COVERS, SECURITY & GENERAL 365 SECTION 6 1022-0052 WINDSHIELDS 1022-0055 TOURING LUGGAGE 1010-0475 SEATS & SISSY BARS 1022-0055 EXHAUST 1010-0478 FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS AIR INTAKES •It's all about how much air a motor can take in •Here are systems that work better and look better than any other systems on the market •An all-aluminum venturi in both designs helps shape the air for better flow •Hand-formed chrome steel covers for a distinctive look that is a perfect match for any Vance & Hines exhaust system •Exhaust, fuel and now air is the complete the package •Each includes a high-flow washable and reusable air filter •Made in the U.S.A. DUKE COVER PART # CHROME 1010-0475 1010-0477 1010-0476 BLACK 1010-0478 1010-0480 1010-0479 1010-0406 1010-0407 DRAK COVER SUG. RETAIL DESCRIPTION For 01-09 Twin Cam w/ Delphi EFI (except 08-09 FLHT, FLHR, FLHX, FLTR), 99-06 Twin Cam w/ CV carb For 08-09 FLHT, FLHR, FLHX, FLTR For 04-09 XL For 01-09 Twin Cam w/ Delphi EFI (except 08-09 FLHT, FLHR, FLHX, FLTR), 99-06 Twin Cam w/ CV carb For 08-09 FLHT, FLHR, FLHX, FLTR For 04-09 XL 1010-0450 $259.95 259.95 259.95 279.95 279.95 279.95 PART # CHROME 1022-0052 1022-0055 BLACK 1010-0406 1010-0407 SUG. RETAIL DESCRIPTION For 01-09 Twin Cam w/ Delphi EFI (except 08-09 FLHT, FLHR, FLHX, FLTR) For 08-09 FLHT, FLHR, FLHX, FLTR $229.95 229.95 For 01-09 Twin Cam w/ Delphi EFI (except 08-09 FLHT, FLHR, FLHX, FLTR) For 08-09 FLHT, FLHR, FLHX, FLTR 259.95 259.95 1010-0298 1010-0211 1010-0270 CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 366 MO-FLOW™ BILLET AIR CLEANERS •Made from T-6 billet aluminum •Each air cleaner assembly contains a velocity plate and reusable pleated gauze performance filter that has been engineered and flow tested to obtain maximum airflow and protection for your motor •Hidden fasteners and an internal breather assembly for a clean look •Available in polished chrome, wrinkle black or gloss black finish •All mounting hardware included PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION SUG. RETAIL GLOSS BLACK CHROME (CONT) 1010-0450 For 08-09 FLHT, FLHR, FLHX, FLTR $299.95 1010-0272 For 93-99 Evolution Big Twin w/ S&S E or G carb $299.95 1010-04451 For 99-06 Twin Cam w/ CV or Mikuni carb, 01-09 1010-02121 For 91-06 XL motors w/ CV carb or Mikuni carb 299.95 Twin Cam w/ Delphi EFI (except 08-09 Dressers) 299.95 1010-0271 For 91-06 XL motors w/ S&S E or G carb 299.95 1010-0448 For 99-06 Twin Cam w/ S&S E or G carb 299.95 WRINKLE BLACK 299.95 1010-0350 For 08-09 FLHT, FLHR, FLHX, FLTR 1010-04441 For 93-99 Evolution Big Twin w/ CV or Mikuni carbs 299.95 1010-0447 For 93-99 Evolution Big Twin w/ S&S E or G carb 299.95 1010-03011 For 99-06 Twin Cam w/ CV or Mikuni carb, 01-09 1010-04461 For 91-06 XL motors w/ CV carb or Mikuni carb 299.95 Twin Cam w/ Delphi EFI (except 08-09 Dressers) 299.95 1010-0449 For 91-06 XL motors w/ S&S E or G carb 299.95 1010-0299 For 99-06 Twin Cam w/ S&S E or G carb 299.95 CHROME 299.95 1010-02981 For 93-99 Evolution Big Twin w/ CV or Mikuni carbs 1010-0349 For 08-09 FLHT, FLHR, FLHX, FLTR 299.95 1010-0303 For 93-99 Evolution Big Twin w/ S&S E or G carb 299.95 1 1 1010-0270 For 99-06 Twin Cam w/ CV or Mikuni carb, 01-09 1010-0300 For 91-06 XL motors w/ CV carb or Mikuni carb 299.95 Twin Cam w/ Delphi EFI (except 08-09 Dressers) 299.95 1010-0302 For 91-06 XL motors w/ S&S E or G carb 299.95 1010-0211 For 99-06 Twin Cam w/ S&S E or G carb 299.95 1 Requires adapter for Mikuni, PART #HS42/001-K, SUG. RETAIL $17.95. 299.95 1010-02101 For 93-99 Evolution Big Twin w/ CV or Mikuni carbs All part numbers in BOLD MAGENTA are new for 2009. SECTION 6 1010-0316 1010-0421 WINDSHIELDS 1010-0317 VENTURI AIR CLEANERS TOURING •Choice of Speed 5 five-spoke or Speed seven-spoke exposed filter design that enhance air flow •Backing plate promotes smooth airflow into carburetor/throttle body •Built-in internal crank case breathers •Includes high-volume K&N air filter •All mounting hardware included •Made in the U.S.A. 7 LUGGAGE 1010-0420 SEATS & SISSY BARS PART # DESCRIPTION SUG. RETAIL FOR 93-06 BIG TWIN MODELS W/ STOCK CV CARB, 01-09 SOFTAIL MODELS, 04-09 DYNA GLIDE MODELS, 02-07 FLT MODELS W/ DELPHI EFI 1010-0316 Speed 5, chrome $419.95 1010-0317 Speed 5, Contrast Cut™ 419.95 1010-0420 Speed 7, chrome 419.95 1010-0421 Speed 7, Contrast Cut™ 419.95 08-09 FLT MODELS 1010-0373 Speed 5, Chrome 419.95 1010-0374 Speed 5, Contrast Cut™ 419.95 PART # DESCRIPTION 08-09 FLT MODELS (CONT) 1010-0422 Speed 7, chrome 1010-0423 Speed 7, Contrast Cut™ FOR 91-09 XL W/ CV CARB/DELPHI EFI 1010-0402 Speed 5, chrome 1010-0403 Speed 5, Contrast Cut™ 1010-0424 Speed 7, chrome 1010-0425 Speed 7, Contrast Cut™ SUG. RETAIL $419.95 419.95 419.95 419.95 419.95 419.95 EXHAUST FUEL/AIR SYSTEMS ENGINE 1010-0411 1010-0410 TRANSMISSION & DRIVELINE GASKETS & SEALS 1010-0408 ELECTRICAL 1010-0412 1010-0409 AIR CLEANER KITS •CNC-machined from 6061 aluminum then polished to a mirror finish •Direct bolt-on for S&S Super E and G motors •Air venturi machined into air cleaner for top-breathing engines •Include designer cover, WCC logo enrichner cover, mounting bracket and UNI high-flow filter •CNC machined 6061 aluminum adapters available for CV carburetor, Delphi fuel injection or Mikuni 42mm or 45mm carburetors; sold separately •Made in the U.S.A. LIGHTING 1010-0413 NOTE: For top breathing engines, carb support bracket/breather kits must be purchased separately. PART # AIR CLEANER KITS 1010-0408 1010-0409 1010-0410 1010-0411 1010-0412 DESCRIPTION SUG. RETAIL CFL logo Pay Up Sucker Coffin Ace of Spades Maltese Cross $349.95 349.95 349.95 349.95 349.95 PART # ACCESSORIES 1010-0413 1010-0414 HANDLEBARS, CONTROLS & MIRRORS 1010-0414 DESCRIPTION SUG. RETAIL Adapter for 88 or later CV carburetors or Delphi fuel injection Adapter for Mikuni 42mm or 45mm carburetor CABLES $39.95 39.95 BRAKES TANKS & OIL FILTERS 1010-0196 1010-0198 DASHES & GAUGES FRAMES, SUSPENSION & FENDERS 1010-0199 1010-0197 •Features a "full perimeter flow" intake screen and a washable filter element •Features unique internal crankcase venting through the mounting bolts into the filter chamber (uses no external breathers) •Available in choice of CNC-engraved designs •Includes instructions; mounting hardware sold separately •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL AIR CLEANER ASSEMBLIES 1010-0196 Flame $299.95 1010-0197 Hot Head 299.95 1010-0198 Joker 299.95 1010-0199 Smooth 299.95 1010-0200 Ball-milled 299.95 FOOTRESTS & LICENSE PLATE FRAMES 1010-0200 CHROME BILLET DIAMOND AIR CLEANER ASSEMBLIES AND MOUNTING KITS 1010-0001 1021-0003 PART # DESCRIPTION MOUNTING KITS 1021-0003 For 01-09 Twin Cam w/ Delphi EFI (except 08-09 Dressers) 1010-0001 For 02-06 Twin Cam w/ S&S E and G carbs 1013-0012 or 99-06 Twin Cam w/ CV carb 1013-0011 For 93-99 Evolution Big Twin w/ CV carb All part numbers in BOLD MAGENTA are new for 2009. SUG. RETAIL $39.95 49.95 39.95 39.95 TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 367 SECTION 6 1010-0481 WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST BIG AIR KIT (BAK) •Substantially increased horsepower and torque are provided by the flow bench and dyno-tested design •Features a beautifully chromed billet aluminum cover •Innovative styling enhances and accentuates your “V” Twin engine •The set back, thin-line design does not interfere with rider’s leg •Maximizes overall performance and fuel efficiency and easily supports engines producing over 120hp •Includes breather kit, mounting hardware, micron-fabric rain coat for wet weather riding and easy-to-follow installation instructions FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL PART # 1010-0481 HIGH PERFORMANCE 6” DRAGTRON™ II AIR CLEANER 1010-0482 •Dynamometer-designed radius entry backing plate maximizes air flow and horsepower •2” washable filter is encased in a heavy stainless steel mesh and is easily serviced •Available in chrome finish •Stainless steel hardware is included •Replacement filters available; see page 380 DESCRIPTION 93-09 Big Twin w/ CV carb or Delphi EFI (except 08-09 Dresser) 08-09 FLHT, FLHX, FLHR, FLTR models SUG. RETAIL $299.95 299.95 DS-288500 NOTE: Support brackets and breather kits are sold separately. U.S. Design Patent #305,149; Taiwan Patent pending. LIGHTING HANDLEBARS, CONTROLS & MIRRORS PART # DS-289044 DESCRIPTION For 90-09 Big Twin (except 08-09 Dressers), 88-08 XL (CV carbs/Delphi EFI) SUG. RETAIL $84.95 1010-0038 CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 368 DS-288501 2110-5003 FINNED AIR CLEANERS •Unique style allows the engine to show through the teardrop silhouette •Chrome-plated billet aluminum construction •Features a K&N washable filter element for performance and long life •For popular carburetors; mounting brackets available separately •Matching finned horn PART #2107-0009 is available separately NOTE: Breather kit must be purchased separately. PART # DESCRIPTION SUG. RETAIL FINNED AIR CLEANERS 1010-0038 For 93-06 Big Twin and 91-06 XL models w/ CV carbs $464.95 1010-0039 For 01-09 Big Twin models w/ Delphi fuel injection (except 08-09 Dressers) 464.95 1010-0040 For 93-06 Big Twin and 91-06 XL w/ S&S Super E and G carburetors 464.95 MOUNTING BRACKETS 1013-0001 For 91-06 XL models 47.95 1013-0002 For 93-09 Big Twin models (except 08-09 Dressers) 51.95 MALIAIR HIGH-PERFORMANCE AIR CLEANERS •Features high-volume 400cfm design, internal velocity stack and K&N air filter •Available in satin or chrome with a choice of insert •Support bracket and breather kit required and must be purchased separately •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 90-06 CARBURETED BIG TWIN, 01-09 DELPHI FUEL-INJECTED MODELS (EXCEPT 08-09 DRESSERS), 88-06 XL AND ALL 1200CC BUELL MODELS (EXCEPT FUEL-INJECTED MODELS) DS-288500 Satin air cleaner w/ satin insert $285.95 DS-288501 Satin air cleaner w/ black insert 285.95 2110-5003 Chrome air cleaner w/ black insert 299.95 2110-5004 Chrome air cleaner w/ chrome insert 299.95 All part numbers in BOLD MAGENTA are new for 2009. SECTION 6 WINDSHIELDS HIGH-VELOCITY AIR CLEANER KITS TOURING •Constructed of A356 heat-treated aluminum with polished, chrome or black-anodized finish •Dyno-proven to produce more horsepower and torque •Includes reusable and washable high-flow air filter with rain sock, custom support bracket with internal breathing system and breather bolts •Replacement rain sock available separately •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 08-09 FLHT, FLHR, FLHX, FLTR 1010-0375 Polished $457.95 1010-0389 Black 477.95 1010-0390 Chrome 620.95 FOR 99-06 TWIN CAM W/ CV CARB OR 01-09 DELPHI FUEL INJECTION (EXCEPT 08-09 FLHT, FLHR, FLTR) 1010-0094 Polished 445.95 1010-0379 Black 465.95 1010-0380 Chrome 608.95 FOR 99-06 TWIN CAM-STYLE ENGINES W/ S&S CARB 1010-0096 Polished 445.95 1010-0383 Black 465.95 1010-0384 Chrome 608.95 FOR 99-06 TWIN CAM-STYLE ENGINES W/ MIKUNI CARB 1010-0098 Polished 457.95 1010-0387 Black 477.95 1010-0388 Chrome 620.95 LUGGAGE PART # DESCRIPTION SUG. RETAIL FOR 93-99 BIG TWIN EVOLUTION-STYLE ENGINES W/ S&S CARB 1010-0095 Polished $445.95 1010-0381 Black 465.95 1010-0382 Chrome 608.95 FOR 93-99 BIG TWIN EVOLUTION-STYLE ENGINES W/ CV CARB 1010-0093 Polished 445.95 1010-0377 Black 465.95 1010-0378 Chrome 608.95 FOR 93-99 BIG TWIN EVOLUTION-STYLE ENGINES W/ MIKUNI CARB 1010-0097 Polished 457.95 1010-0385 Black 477.95 1010-0386 Chrome 620.95 REPLACEMENT COMPONENTS 1011-0496 Repl. air filter 69.95 1011-1008 Repl. rain sock 45.95 1010-0376 SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES 1010-0130 BRAKES 1010-0261 SPEEDY FLOW AIR CLEANERS 1011-0534 1011-0535 1011-0536 1011-0537 TWIN CAM RAM CHARGER •Designed for all Delphi fuel-injected bikes •Adds a cool drag look while also increasing horsepower by 5+ and increasing torque by 8+ ft.-lbs. •Machined from solid 6061 T-6 billet aluminum •Tig-welded for superior strength •Polished to a show-quality finish •Pre-filters available separately •Made in U.S.A. PART # DESCRIPTION RAM CHARGER 1010-0130 For all 01-05 Delphi fuel-injected Twin Cams RAM CHARGER PRE-FILTERS 1011-0534 Black 1011-0535 Blue 1011-0536 Red 1011-0537 Yellow •Features one-piece billet aluminum backing plate/carb support with internal breathing system •Eliminates need for banjo fittings, hoses and breather filter •Filter is 5/8” deeper than factory Screaming Eagle filter; better flow than any stage I or II kits on the market •Dyno-proven to add 8-12 horsepower over stock with proper fuel adjustments •Reuses the stock oval outer cover •Setscrews keep the breather bolts from backing out over time •Mikuni application requires adapter (sold separately) •Available with polished or black-anodized finish •Made in the U.S.A. PART # POLISHED 1010-0376 1010-0261 1010-0262 SUG. RETAIL $479.95 43.95 43.95 43.95 43.95 DESCRIPTION SUG. RETAIL For 08-09 FLHT, FLHR, FLHX, FLTR $207.95 For 93-99 Big Twin Evolution with CV carb 207.95 For 99-09 Twin Cam-style engines with CV carb or Delphi 207.95 fuel injection (except 08-09 FLHT, FLHR, FLHX, FLTR) BLACK 1010-0393 1010-0391 1010-0392 For 08-09 FLHT, FLHR, FLHX, FLTR For 93-99 Big Twin Evolution with CV carb For 99-09 Twin Cam-style engines with CV carb or Delphi fuel injection (except 08-09 FLHT, FLHR, FLHX, FLTR) OPTIONAL/REPLACEMENT COMPONENTS HS42/001-K Mikuni air box adapter kit 1011-1338 Repl. air filter All part numbers in BOLD MAGENTA are new for 2009. 227.95 227.95 227.95 17.95 55.95 TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 369 SECTION 6 WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS 1010-0187 ENGINE TRANSMISSION & DRIVELINE 1010-0187 GASKETS & SEALS ELECTRICAL LIGHTING DS-288884 HANDLEBARS, CONTROLS & MIRRORS CABLES DS-288885 “BILLET SUCKER” AIR CLEANER ASSEMBLIES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 370 1014-0030 •Available in Stage I and Stage II •Both feature an oversize exposed filter design for tremendous airflow •Breather passages exit at the mouth of the carb, creating a virtually closed-loop system •Kits include a high-flow air filter, chrome outer cover, chrome backing plate/support bracket and all necessary hardware PART # DESCRIPTION STAGE I KITS 1010-0355 Smooth, for 08-09 FLHT, FLHR, FLHX, FLTR models 1010-0357 Scalloped, for 08-09 FLHT, FLHR, FLHX, FLTR models 1010-0186 Smooth, for all 99-06 Twin Cam CV carb and 01-09 Twin Cam Delphi EFI models (except 08-09 FLHT, FLHR, FLHX, FLTR) 1010-0187 Scalloped, for all 99-06 Twin Cam CV carb and 01-09 Twin Cam Delphi EFI models (except 08-09 FLHT, FLHR, FLHX, FLTR) STAGE II KITS 1010-0356 Smooth, for 08-09 FLHT, FLHR, FLHX, FLTR models 1010-0358 Scalloped, for 08-09 FLHT, FLHR, FLHX, FLTR models 1010-0359 Grooved, for 08-09 FLHT, FLHR, FLHX, FLTR models 1010-0188 Smooth, for all 99-06 Twin Cam CV carb and 01-09 Twin Cam Delphi EFI models (except 08-09 FLHT, FLHR, FLHX, FLTR) 1010-0189 Scalloped, for all 99-06 Twin Cam CV carb and 01-09 Twin Cam Delphi EFI models (except 08-09 FLHT, FLHR, FLHX, FLTR) 1010-0190 Grooved, for all 99-06 Twin Cam CV carb and 01-09 Twin Cam Delphi EFI models (except 08-09 FLHT, FLHR, FLHX, FLTR) DS-288885 Smooth, for all 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam Carb and Delphi EFI models DS-288884 Grooved, for all 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam Carb and Delphi EFI models 1010-0066 Scalloped, for all 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam Carb and Delphi EFI models 1010-0065 Scalloped, for 99-01 Twin Cam FLT fuel-injected models 1010-00621 Grooved, for 91-09 XL models 1010-00641 Scalloped, for 91-09 XL models 1010-04421 Deep cut, for 91-09 XL models (black) REPLACEMENT/OPTIONAL COMPONENTS 1010-0067 Optional Stage II scalloped outer cover 1014-0030 Optional Stage I scalloped outer cover 1010-0361 Repl. Stage II air filter element for 08-09 FLT models 2110-9495 Repl. Stage II air filter element 1010-0360 Repl. Stage I air filter element for 08-09 FLT models 2110-9494 Repl. Stage I air filter element 1 Will fit 88-90 models, breather system is not applicable for these model years. All part numbers in BOLD MAGENTA are new for 2009. SUG. RETAIL $218.95 218.95 218.95 218.95 229.95 229.95 229.95 229.95 229.95 229.95 222.95 222.95 222.95 229.95 222.95 229.95 229.95 120.95 120.95 53.95 53.95 49.95 49.95 SECTION 6 WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS 1010-0181 EXHAUST DS-288882 “BIG SUCKER” PERFORMANCE AIR FILTER KITS •Features a one-piece aluminum backing plate/carb support bracket •Eliminates the need for banjo fittings, hoses and filter •Breather passages exit at the mouth of the carburetor, creating a virtually closed-loop system •Stage I kit includes a high-flow filter and accepts 93-09 oval or round OEM outer cover •Stage II kit includes a 20% larger high-flow filter and accepts an 8” round Ness or 8” round OEM outer cover •All necessary hardware and instructions are included with each kit FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS DS-288880 NOTE: Stage I kit for 08-09 Dynas and XL models will not accept the OEM cover. Must use a round 8” aftermarket cover. 1010-0180 PART # DESCRIPTION SUG. RETAIL STAGE I KITS WITHOUT COVER 1010-0351 For 08-09 FLHT, FLHR, FLHX, FLTR models (natural) $133.95 1010-0353 For 08-09 FLHT, FLHR, FLHX, FLTR models (chrome) 147.95 1010-0179 For 99-06 Twin Cam CV carb and 01-09 Twin Cam Delphi EFI models (natural) (except 08-09 FLHT, FLHR, FLHX, FLTR) 133.95 1010-0181 For 99-06 Twin Cam CV carb and 01-09 Twin Cam Delphi EFI models (chrome) (except 08-09 FLHT, FLHR, FLHX, FLTR) 153.95 DS-288880 For 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam carb and Delphi EFI models (natural) 133.95 DS-288882 For 99-01 FLHTI/FLHRI (natural) 133.95 133.95 1010-00601 For 91-09 XL models (natural) STAGE II KITS WITHOUT COVER 1010-0352 For 08-09 FLHT, FLHR, FLHX, FLTR models (natural) 143.95 1010-0354 For 08-09 FLHT, FLHR, FLHX, FLTR models (chrome) 157.95 1010-0180 For 99-06 Twin Cam CV carb and 01-09 Twin Cam Delphi EFI models (natural) (except 08-09 FLHT, FLHR, FLHX, FLTR) 143.95 1010-0185 For 99-06 Twin Cam CV carb and 01-09 Twin Cam Delphi EFI models (chrome) (except 08-09 FLHT, FLHR, FLHX, FLTR) 163.95 DS-288881 For 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam carb and Delphi EFI models (natural) 143.95 DS-288883 For 99-01 FLHTI/FLHRI (natural) 143.95 1 143.95 1010-0061 For 91-09 XL models (natural) PART # DESCRIPTION SUG. RETAIL STAGE II KITS WITH SMOOTH STEEL COVER 1010-0432 For 08-09 FLHT, FLHR, FLHX, FLTR models (chrome) $171.95 1010-0434 For 08-09 FLHT, FLHR, FLHX, FLTR models (black) 171.95 1010-0431 For 99-06 Twin Cam CV carb and 01-09 Twin Cam Delphi EFI models (chrome) (except 08-09 FLHT, FLHR, FLHX, FLTR) 171.95 1010-0433 For 99-06 Twin Cam CV carb and 01-09 Twin Cam Delphi EFI models (black) (except 08-09 FLHT, FLHR, FLHX, FLTR) 171.95 1010-0430 For 93-99 Evolution Big Twin models w/ CV carb, 99-05 Twin Cam carb and Delphi EFI models (chrome) 171.95 1010-0428 For 99-01 FLHTI/FLHRI (chrome) 171.95 171.95 1010-04291 For 91-09 XL models (chrome) REPLACEMENT/OPTIONAL COMPONENTS 1010-0360 Stage I air filter for 08-09 FLHT, FLHR, FLHX, FLTR models 49.95 2110-9494 Stage I air filter (except DS-288882) 49.95 1010-0361 Stage II air filter for 08-09 FLHT, FLHR, FLHX, FLTR models 53.95 2110-9495 Stage II air filter 53.95 2110-9496 Stage I air filter for DS-288882 only 51.95 1014-0030 Optional Stage I scalloped outer cover 120.95 1010-0067 Optional Stage II scalloped outer cover 120.95 1 Will fit 88-90 models also, breather system is not applicable for these model years. 1010-0396 HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS TIRES, TUBES & WHEELS •Feature steel backing plate integrated into the filter •Backing plate includes additional urethane that forms into a radius inlet •No aluminum backing plate required •Utilizes factory exposed breather hoses and hardware •Accepts factory outer air cleaner cover only DESCRIPTION For 99-06 Twin Cam w/ CV carb, 01-09 Twin Cam w/ Delphi EFI (except 08-09 FLHT, FLHR, FLHX, FLTR) For 08-09 FLHT, FLHR, FLHX, FLTR LIGHTING FOOTRESTS & LICENSE PLATE FRAMES CHEAP SUCKER AIR FILTER KITS PART # 1010-0395 ELECTRICAL HARDWARE, CHEMICALS & TOOLS SUG. RETAIL $88.95 92.95 All part numbers in BOLD MAGENTA are new for 2009. 1010-0396 COVERS, SECURITY & GENERAL 371 SECTION 6 WINDSHIELDS TOURING LUGGAGE DS-289606 SEATS & SISSY BARS 2110-1259 DS-289604 EXHAUST FUEL/AIR SYSTEMS 2110-1260 ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS 2110-1257 POWER PACC™ AIR CLEANERS 1010-0037 •High-performance air cleaner system provides dramatic out-of-the box performance gains of up to 15% •Precision-machined, one-piece billet backing plate eliminates flimsy brackets •Snap-in venturi creates 100% unobstructed air flow for increased horsepower and torque through the entire rpm range •Includes specially designed washable extra-high-volume reusable air filter •All kits include complete premium mounting hardware •Accept most aftermarket or stock-style air cleaner covers •Available with or without Doherty Machines’ patented PowerVents™ •Instructions included for simple installation •Made in the U.S.A. NOTE: Not for use with Magneti-Marelli fuel injection systems. ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS PART # AIR CLEANER DS-289605 DS-289604 AIR CLEANER DS-289607 DS-289606 AIR CLEANER 2110-1258 2110-1259 2110-1260 DESCRIPTION FOR USE WITH OEM COVER For 99-06 Twin Cam For 93-99 80” Big Twin WITH POWERVENT FOR USE WITH OEM COVER For 99-06 Twin Cam For 93-99 80” Big Twin FOR USE WITH S&S TEARDROP COVER For 00-06 Twin Cam For 93-99 80” Big Twin For 84-92 80” Big Twin SUG. RETAIL $233.95 233.95 316.95 316.95 238.95 238.95 238.95 PART # DESCRIPTION SUG. RETAIL AIR CLEANER WITH POWERVENT FOR USE WITH S&S TEARDROP COVER 2110-1257 For 99-06 Twin Cam $325.95 2110-1256 For 93-99 80” Big Twin 325.95 AIR CLEANER WITH POWERVENT FOR USE WITH OEM OR AFTERMARKET COVER 1010-0037 For 01-09 Delphi fuel-injected models (except 08-09 Dresser, 08-09 Dyna, 07-09 XL) 299.95 REPLACEMENT COMPONENTS DS-289615 Repl. air filter w/ breather washers and O-ring 63.95 CABLES 1010-0131 1010-0132 BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 372 PRO-MOD BREATHER KIT WITH AIR CLEANER 1010-0311 •Designed to be modular by allowing a custom look, and adds horsepower •Can be used as a complete system or as just a Pro-Mod Breather •Machined from solid 6061 T-6 billet aluminum with a unique internal breather design (no hoses) •Accepts stock Screamin’ Eagle air cleaner cover – Yost round air cleaner included •Includes all necessary hardware for easy installation •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL RAW FINISH 1010-0132 For 99-06 Twin Cams w/ CV carburetor or 01-09 w/ Delphi fuel injection (except 08-09 Dresser) $196.95 1010-0131 For 93-99 Evolution Big Twins w/ CV carb 196.95 CHROME FINISH 1010-0310 For 99-06 Twin Cams w/ CV carburetor or 01-09 w/ Delphi fuel injection (except 08-09 Dresser) 308.95 1010-0311 For 93-99 Evolution Big Twins w/ CV carb 308.95 All part numbers in BOLD MAGENTA are new for 2009. SECTION 6 WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS DS-289070 DS-289130 1010-0419 1010-0325 AIR CLEANERS •Original S&S chrome teardrop air cleaner assemblies •Include an S&S cover, backing plate and high-quality filter element and hardware kit •Increase horsepower with no other changes •Available for most OEM carburetors •Made in the U.S.A. EXHAUST FUEL/AIR SYSTEMS 1010-0237 ENGINE NOTE: Covers may need to be notched when used with custom or 5-gallon or larger fuel tanks. NOTE: Installation of an S&S air cleaner may require re-jetting. 1014-0040 1010-0235 PART # DESCRIPTION AIR CLEANERS FOR S&S CARBURETORS DS-289137 For E & G series carbs on 99-06 Twin Cam models DS-289211 For E & G series carbs on 92-99 Evolution Big Twin models DS-289129 For E & G series carbs on 84-92 Big Twin and 86-90 XL models DS-289130 For E & G series carbs on 48-84 Big Twin and 57-85 XL models DS-289070 For L series carbs AIR CLEANERS FOR STOCK H-D CARBURETORS/FUEL-INJECTION SYSTEMS 1010-0419 For 08-09 EFI Touring models 1010-0325 For CV carbs on 93-06 Big Twin, 01-09 Big Twin EFI models (except 08-09 touring) 1010-0326 For CV carbs on 91-06 XL DS-289401 For Keihin carbs on 84-89 Big Twin and 86-87 XL models DS-289070 For Tillotson, Bendix and Keihin carbs on 66-84 Shovel Big Twin and 66-85 XL models DS-289400 For CV carbs on 94-02 Buell models AIR CLEANERS FOR SINGLE-BORE EFI MODELS 1010-0237 For stock H-D heads or S&S heads for stock or 4” bore, teardrop 1010-0236 For stock H-D heads or S&S heads for stock or 4” bore, Desperado 1010-0235 For S&S heads for 41/8” bore, Desperado REPLACEMENT PARTS DS-289404 Repl. S&S air cleaner cover for E & G carb DS-289403 Repl. S&S air cleaner cover for S&S CV air cleaner and Super B carbs DS-289405 Repl. air cleaner cover screws (10-pk.) 1011-0324 Repl. crankcase breather hose for 93-06 Big Twin, 91-06 XL and 81-03 Buells 1011-0325 Breather screw seals (silicone-coated steel washer), .520” i.d. (10-pk.) 1011-0326 Breather screw seals (silicone-coated steel washer), .380” i.d. (10-pk.) DS-289408 Repl. filter element for DS-289137, DS-289211, DS-289128, DS-289129, DS-289130, 1010-0325 and 1010-0326 DS-289409 Repl. filter element for DS-289070, DS-289400, DS-289401, DS-289402, DS-289410 and S&S Super B 1014-0040 Chrome Desperado-style air cover; repl. standard cover for all E & G carb kits SUG. RETAIL $205.95 205.95 205.95 205.95 205.95 246.95 215.95 215.95 218.95 205.95 218.95 205.95 205.95 205.95 128.95 128.95 .95 5.95 .95 .95 17.95 15.95 128.95 TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS 1022-0024 1022-0025 DASHES & GAUGES 1022-0026 1013-0016 TUNED INDUCTION AIR CLEANERS AND BRACKETS •Swept forward, 2-into-1 design rams additional air into the cylinder •Natural supercharging effect increases mid-range torque •Nearly twice the filter area of a teardrop air cleaner •Air cleaners are available in several different finishes •Chrome bracket kits feature a support bracket and breather system all in one •Air cleaner and bracket kits must be purchased separately •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL TUNED INDUCTION AIR CLEANERS 1022-0024 Natural $246.95 1022-0025 Black 267.95 1022-0026 Chrome 334.95 CHROME BRACKET KITS 1013-0014 For 93-06 Big Twin models w/ S&S E/G series carbs 421.95 1013-0015 For 93-06 Big Twin models w/ CV carb or 01-07 Big Twin models w/ Delphi EFI 385.95 1013-0014 1011-0898 PART # DESCRIPTION CHROME BRACKET KITS (CONT) 1013-0016 For S&S 124” motors with S&S E/G series carb REPLACEMENT PARTS 1011-0897 Repl. red filter w/ clamp (ea.) 1011-0898 Repl. blue filter w/ clamp (ea.) 1011-1336 Moisture-repellant rain cover for S&S tuned induction filters (pr.) All part numbers in BOLD MAGENTA are new for 2009. FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES 1011-1336 SUG. RETAIL $421.95 48.95 48.95 37.95 TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 373 SECTION 6 WINDSHIELDS 1010-0294 TOURING LUGGAGE SEATS & SISSY BARS 1011-1388 1011-0520 EXHAUST RK SERIES INTAKE ASSEMBLIES FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL •Complete intake assembly fits neatly behind the stock air cleaner cover •Provide a significant increase in airflow, smoother delivery to engine, while boosting performance and filtration •Feature a K & N High-Flow air filter, pleated design for optimum airflow, specially designed lip seal for perfect seal, powder-coated billet aluminum backplate (except PART #1010-0417 which is cast aluminum) that eliminates external breathers and a built-in, dyno-tuned velocity stack •Maintain factory appearance, utilizes the stock air cleaner outer cover •Twin Cam version available in two heights: 15/8” tall (stock) or 21/4” tall (large capacity) 1010-0322 NOTE: C.A.R.B. approved for 99-06 models. PART # DESCRIPTION SUG. RETAIL FOR 99-06 TWIN CAM W/ CV CARB, 01-09 TWIN CAM W/ DELPHI EFI (EXCEPT 08-09 FLSTSB, DYNA AND DRESSER MODELS) $173.95 1011-0520 Stock capacity filter assembly; 15/8” tall 1011-1388 Replacement filter for PART #1011-0520 15/8” tall 60.95 1010-0294 Upgrade filter kit for PART #1011-0520 (includes 128.95 longer spacers); 21/4” tall 1010-0273 Large capacity filter assembly; 21/4” tall 216.95 PART # DESCRIPTION SUG. FOR 99-06 TWIN CAM W/ CV CARB, 01-09 TWIN CAM W/ DELPHI EFI (EXCEPT 08-09 FLSTSB, DYNA AND DRESSER MODELS) (CONT) 1010-0295 Repl. filter for PART #1010-0273; 21/4” tall FOR 08-09 FLHT/FLHR/FLHX/FLTR MODELS 1010-0417 Stock capacity filter assembly; 15/8” tall FOR 04-06 XL 883/1200 MODELS 1010-03221 Large capacity filter assembly; 23/8” tall 1 LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS RK SERIES BILLET AIR FILTER ASSEMBLIES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 374 $66.95 248.95 340.95 Does not include cover. RK3901 •Chrome-plated polished billet aluminum cover •Round or Teardrop, Flames, Ball-Grooved or Mirror Finish •Includes K&N Original High-Flow Air Filter •Provides a substantial increase in horsepower •Pleated design provides optimum airflow •Powder-coated billet aluminum backing plate •Spacers and hardware included •Specially designed drycharger extends service intervals and is pre-treated to repel water; sold separately RK3912 RK3911 RK-3902 PART # DESCRIPTION FOR 92-99 80” BIG TWIN WITH OEM CARB RK3901 Smooth round filter assembly RK3911 Grooved round filter assembly RK3902 Smooth teardrop filter assembly RK3912 Grooved teardrop filter assembly RK-3922 Flame teardrop filter assembly FOR 91-97 XL 1200 WITH OEM CARB RK3903 Smooth round filter assembly RK3913 Grooved round assembly SUG. RETAIL $240.95 227.95 227.95 240.95 240.95 240.95 227.95 •Designed to fit Harley-Davidson motorcycles equipped with various carburetors •These are neither street legal nor recommended by Harley-Davidson •Increase horsepower with proper carburetor calibration •These air cleaners clamp directly to 1010-0314 the carburetor flange PART # DESCRIPTION 1010-0314 76-89 Keihin butterfly carbs; 5” dia. and polished outer cover (except all S&S E & G carbs) 1011-1058 36-38mm Mikuni carbs; 5” dia. open round style RK-3922 PART # DESCRIPTION FOR 91-97 XL 1200 WITH OEM CARB (CONT) RK3904 Smooth teardrop filter assembly RK3914 Grooved teardrop filter assembly RK3924 Flame teardrop filter assembly REPLACEMENT FILTERS/DRYCHARGERS E-3333 Teardrop-style filter E-3336 Round-style filter RK-3901PK Drycharger for round filter assembly RK-3902PK Drycharger for teardrop filter assembly FOOTRESTS CUSTOM AIR & LICENSE PLATE FRAMES CLEANER ASSEMBLIES TIRES, TUBES & WHEELS RETAIL SUG. RETAIL $227.95 240.95 240.95 59.95 58.95 24.95 24.95 1011-1059 1011-1060 1011-1058 SUG. RETAIL $71.95 59.95 PART # 1011-1059 RC-0920 1011-1060 DESCRIPTION SUG. RETAIL $71.95 36-38mm Mikuni carbs; 6” dia. chrome bonnet style 40-45mm Mikuni carbs; 5” dia. open round style 61.95 40-45mm Mikuni carbs; 6” dia. chrome bonnet style 71.95 All part numbers in BOLD MAGENTA are new for 2009. SECTION 6 WINDSHIELDS TOURING 1010-0398 1010-0397 LUGGAGE TRIFLOW STAGE 2 AIR INTAKES TRIFLOW STAGE 1 AIR INTAKES •Virtually no restriction in airflow, yet provides air-cleaner protection •Billet aluminum construction with black wrinkle powdercoated finish •Show-chrome decorative inlay plate •21/4” washable filter •Includes all required mounting hardware PART # DESCRIPTION SUG. RETAIL 1010-0397 For 99-09 Twin Cam w/ CV carb/Delphi EFI (except 08-09 Dressers) $329.95 1010-0399 For 99-06 Twin Cam w/ Mikuni carb 381.95 •Virtually no restriction in airflow, yet provides air-cleaner protection •Billet aluminum construction with black wrinkle powder-coated finish •Internal velocity stack that has been flow bench tested for increased air flow •Wider filter (2.75”) than Wimmer’s Stage 1 model for extra airflow •Show-chrome decorative inlay plate •Washable filter •Includes all required mounting hardware PART # DESCRIPTION SUG. RETAIL 1010-0398 For 99-09 Twin Cam w/ CV carb/Delphi EFI (except 08-09 Dressers) $361.95 1010-0400 For 99-09 Twin Cam w/ Mikuni carb 415.95 1010-0313 SEATS & SISSY BARS EXHAUST AIR CLEANER ASSEMBLY •Billet aluminum construction •Includes high-flow filter element •All necessary installation hardware included PART # DESCRIPTION SUG. RETAIL 1010-0418 For 93-06 Big Twin w/ CV carb, 01-09 Twin Cam w/ Delphi EFI (except 06-09 Dyna, 08-09 Dresser) $249.95 1010-0018 FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL 1010-0312 1010-0394 LIGHTING 1010-0019 AIR CLEANER ASSEMBLIES WITH K&N FILTERS •All parts are CNC-machined from billet aluminum stock •Fully polished then chrome plated •Available in old school Finned design or super-compact Round style •Equipped with a high-performance genuine K&N air filter that can be accessed by removing a single screw •Mounting brackets for air cleaners include hardware; required brackets must be purchased separately •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION AIR CLEANER ASSEMBLIES MOUNTING BRACKETS 1010-0312 Old School Finned w/ 4” dia. filter $299.95 1013-0018 For 93-99 Evolution Big Twin w/ Mikuni carb 1010-0313 4” round style w/ 4” dia. filter 229.95 1013-0019 For 99-06 Twin Cam w/ Mikuni carb 1010-0394 6” Retro-Finned round style w/ 6” dia. filter 299.95 1013-0020 For 93-99 Evolution Big Twin w/ S&S carb 1013-0021 For 99-06 Twin Cam w/ S&S carb HANDLEBARS, CONTROLS & MIRRORS SUG. RETAIL $109.95 119.95 169.95 179.95 DS-288999 CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS 1010-0192 “BOB” RETRO-STYLE AIR CLEANER STAMPED STEEL DRAGTRON™-STYLE AIR CLEANER •Retro-style chrome-plated air cleaner measures 51/2” in diameter •Has a re-useable foam filter element •All necessary mounting hardware included •Replacement filter element available separately •Stamped steel version of our popular die-cast Dragtron air cleaner •Fits Bendix, Keihin and Tillotson carburetors PART # DS-288999 DS-289043 DESCRIPTION Air cleaner Repl. foam element NOTE: Requires appropriate carb support bracket. SUG. RETAIL $28.95 4.95 SUG. PART # DESCRIPTION RETAIL 1010-0191 For CV and Delphi fuel-injected applications (except 08-09 Dressers) $64.95 1010-0192 For S&S E and G series carburetors 64.95 1011-0881 Repl. air filter element 14.95 7” ROUND AIR CLEANERS •Chrome air cleaners fit Harley models equipped with Bendix or Keihin carburetors •PART# DS-288903 will require a support brace or a brace/breather kit for models listed (sold separately) •Air filter included SUG. PART # DESCRIPTION RETAIL DS-288903 For 90-06 Big Twin and 88-06 XL models w/ OEM CV carb, 01-09 Twin Cam w/ Delphi EFI (except 08-09 Dressers) $49.95 DS-288998 For Bendix and Keihin (not CV) carbs 39.95 All part numbers in BOLD MAGENTA are new for 2009. FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 375 SECTION 6 AIR CLEANER ADAPTER WINDSHIELDS TOURING LUGGAGE •CNC-machined with a polished aluminum finish •Enables you to mount a CV or S&S E and G-style air cleaner to a Mikuni HSR 42/45/48mm carb •Eliminates the stock O-ring mount and provides a secure fit •Comes with mounting hardware, gasket and breather washers •Made in the U.S.A. PART # DESCRIPTION 7805-0032 Air cleaner adapter SUG. RETAIL $55.95 1015-0100 7806-1918 SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS 2110-1902 1015-0102 CHROME SHOW-OFF COVERS •Simple and easy way to dress up your Forcewinder XR or Forcewinder XR-2 air cleaner •Available in four designs: Skull & Crossbones, Skull, Hot Rod and Tribal •Includes cover, two-sided tape and mounting screws •For use with K&N or Force filter elements only •Made in the U.S.A. NOTE: K&N air filters say K&N on the filter; Force filters say Force on the filter. PART # DESCRIPTION SUG. RETAIL PART # FOR K&N FILTER FOR FORCE FILTER 1015-0100 Skull & Crossbones $163.95 7806-1918 1015-0102 Skull 163.95 2110-1903 7806-1917 Hot Rod 163.95 2110-1902 Tribal 163.95 DESCRIPTION SUG. RETAIL Hot Rod Tribal $163.95 163.95 ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FLAME AIR FILTER COVER FORCE AIR CLEANER COVER •Chrome-plated billet aluminum construction •Fits Wimmer Super Filter intake systems •Made in the U.S.A. PART # 1014-0005 DESCRIPTION Flame air filter cover •Steel accent piece adds even more style to your Force air cleaner cover •Every cover is made by hand and then chrome plated SUG. RETAIL $58.95 PART # 1010-0086 FRAMES, SUSPENSION & FENDERS DESCRIPTION Chrome Force air cleaner cover SUG. RETAIL $149.95 8” AIR CLEANER COVER •Die-cast aluminum with a chrome finish •For Ness stage I and II “Big Sucker” kits or Big Twin Screamin’ Eagle® backing plates PART # DS-288949 DESCRIPTION Smooth SUG. RETAIL $82.95 8634 FOOTRESTS & LICENSE PLATE FRAMES CUSTOM AIR CLEANER COVERS TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS AIR CLEANER FAIRING COVERS, SECURITY & GENERAL PART # 1010-0088 376 •Stylish covers fit over your favorite air cleaner •Composite fiberglass construction yields both strength and light weight •Available in Street Sweeper design •Available for S&S and OEM air cleaners •Bolts directly to Screamin’ Eagle air filters •Chrome finish DESCRIPTION Chrome air cleaner cover SUG. RETAIL $299.95 PART # DESCRIPTION SUG. RETAIL 8624 For all S&S air cleaners $91.95 For round OEM CV air cleaner 91.95 8634 AIR CLEANER COVER PLUGS •Genuine James Gaskets® cover plugs replace those found in OEM air cleaners on 86-91 Big Twin models; repl. OEM #738 •Sold in 10-pk. •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL DS-173431 Air cleaner cover plugs $.95 All part numbers in BOLD MAGENTA are new for 2009. SECTION 6 1010-0165 1010-0164 SKULL AIR CLEANER COVER WINDSHIELDS •Replacement cover for the standard teardrop cover on S&S E or G series air cleaners •Skull motif flows cleanly down the side of the cover for a unique look •High-strength composite material construction with a chrome-plated finish •Installs quickly and easily with supplied hardware PART # DESCRIPTION 1010-0164 Satin black 1010-0165 Chrome TOURING SUG. RETAIL $99.95 139.95 LUGGAGE SEATS & SISSY BARS 1015-0098 1015-0097 EXHAUST FUEL/AIR SYSTEMS SMOOTH STYLE CARBURETOR COVERS FIVE-BOLT DOMED AIR CLEANER INSERT •Available in a teardrop design •Comes without element •Features a chrome finish PART # 1015-0097 1015-0098 1015-0099 DESCRIPTION For Linkert carburetors For all side valve Linkert carburetors For S&S carburetors on 84-91 Big Twin SUG. RETAIL $42.95 52.95 74.95 •Die-cast insert with a chrome finish •Matches the five-bolt style of OEM derby cover PART # DESCRIPTION DS-288929 For 99-09 OEM Twin Cam air cleaners (except 08-09 Dyna) ENGINE SUG. RETAIL $37.95 TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING 1015-0110 DS-288841 1014-0006 DS-288842 HANDLEBARS, CONTROLS & MIRRORS CHROME BILLET AIR CLEANER INSERTS CABLES •Available in a variety of designs •Sold each •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 99-09 TWIN CAM ROUND AIR CLEANER (EXCEPT 08-09 DYNA) 1014-0007 Joker $69.95 1015-0110 Finned 69.95 DS-288841 Flame 69.95 DS-288842 Smooth 69.95 1014-0006 Hot Head 69.95 1010-0007 Ball-milled 69.95 FOR 84-99 EVOLUTION ROUND AIR CLEANER DS-288831 Joker 81.95 DS-288829 Flame 81.95 1014-0037 Hot Head 79.95 DS-288832 Smooth 81.95 FOR S&S E AND G SERIES TEARDROP AIR CLEANER DS-288835 Joker 82.95 DS-288833 Flame 82.95 DS-288836 Smooth 82.95 DS-288753 AIR CLEANER INSERTS BRAKES DS-288831 1010-0007 DS-288836 DASHES & GAUGES FRAMES, SUSPENSION & FENDERS DS-288835 1014-0013 1014-0012 •Chrome or black-anodized 6061 T-6 billet aluminum •Fit all S&S E and G series teardrop air cleaners •Mounting hardware included PART # CHROME 1014-0010 DS-288753 BLACK ANODIZED 1014-0013 1014-0012 DESCRIPTION SUG. RETAIL Maltese Cross Smooth $92.95 88.95 Maltese Cross Tribal 92.95 92.95 TANKS & OIL FILTERS All part numbers in BOLD MAGENTA are new for 2009. FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 377 SECTION 6 WINDSHIELDS TOURING DS-288816 DS-288820 LUGGAGE SEATS & SISSY BARS AIR CLEANER INSERTS 1010-0416 1010-0415 •Bolt-on inserts give a customized look to aftermarket or OEM air cleaner •Constructed of billet aluminum and available in a chrome finish •Made in the U.S.A. AIR CLEANER INSERTS EXHAUST FUEL/AIR SYSTEMS •CNC-machined billet aluminum construction •Finned style with a chrome or gloss black finish •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 99-09 OEM TWIN CAM AIR CLEANER (EXCEPT 08-09 DYNA) 1010-0415 Black $120.95 1010-0416 Chrome 120.95 ENGINE DS-289069C PART # DESCRIPTION FOR 84-99 80” BIG TWIN ROUND AIR CLEANER DS-288816 Millennium smooth FOR 99-09 TWIN CAM MODELS WITH OEM AIR CLEANER (EXCEPT 08-09 DYNA) DS-288819 Millennium smooth DS-288820 Millennium ball-milled FOR S&S E AND G AIR CLEANER DS-289069C Ball-milled SUG. RETAIL $88.95 77.95 77.95 99.95 TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS DIAMOND AIR CLEANER COVER INSERT •High-quality chrome-plated billet aluminum •Matching engine covers, brake caliper insert, footpegs and grips available separately •Made in the U.S.A. PART # DS-288901 AIR CLEANER INSERT DESCRIPTION Insert for 8” air cleaner cover; for all 84-99 OEM round air cleaners SUG. RETAIL $80.95 •Insert is crafted with eye-catching detail in mind •Available in a chrome hog design PART # 1014-0023 DESCRIPTION For Evolution SUG. RETAIL $145.95 CABLES LIVE TO RIDE AIR CLEANER INSERT BRAKES •Die-cast construction with chrome finish •Fits OEM air cleaner PART # DESCRIPTION 1014-0039 For 04-09 XL TANKS & OIL FILTERS SUG. RETAIL $39.95 DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 378 1022-0001 1022-0002 1022-0003 INJECTI-COVERS™ •Constructed from 16-gauge cold rolled steel, polished then chrome-plated •Great looking covers hide the OEM throttle body •Offer a true custom look NOTE: Covers may not fit with all styles of breather kits and support brackets. Check clearance before mounting. PART # 1022-0001 1022-0002 1022-0003 DESCRIPTION For 95-01 FLT EFI models w/ OEM or Screamin’ Eagle air filter For 01-05 FXST/FLST models, 04-05 Dyna and 02-05 FLT w/ Screamin’ Eagle air filter For 01-05 FXST/FLST models, 04-05 Dyna and 02-05 FLT w/ Forcewinder or D&M-style air intake system All part numbers in BOLD MAGENTA are new for 2009. SUG. RETAIL $49.95 59.95 149.95 SECTION 6 WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS 1011-0313 1011-1203 EXHAUST FUEL/AIR SYSTEMS ENGINE 1011-1204 TRANSMISSION & DRIVELINE GASKETS & SEALS 1011-0312 ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS 1011-0320 CABLES 1011-0318 1011-0319 BRAKES REUSABLE AIR FILTERS •Durable epoxy-coated wire mesh designed to maximize airflow and provide peak filtration •100% reusable and washable •High-flow four-layer surgical-grade cotton filtration •Urethane body that won’t crack or curl like rubber •Precision hand-poured design •Made in the U.S.A. YEAR MODEL FOR BIG TWIN 99-09 Twin Cam (exc. 99-01 EFI, 08-09 Dresser, 08-09 Dyna Glide, 08-09 FLSTSB) 08-09 FLHT/FLHR/FLTR/FLHX 99-01 88” Twin Cam (w/ Magneti-Marelli EFI) 95-98 80” Evolution (w/ Magneti-Marelli EFI) 90-99 80” Evolution (carbureted) 86-89 80” Evolution (carbureted) 02-09 V-Rod FOR XL/BUELL 04-09 XL Evolution 88-03 XL Evolution 96-02 Buell (exc. 96 S2/S2T, 00-02 Blast) FOR AFTERMARKET AIR CLEANERS S&S “D” teardrop air filter S&S 6” x 23/16” air filter S&S Super E and G series carb air filter Screamin’ Eagle air filter 08-09 FLHTCUSE/FLHRSE Screamin’ Eagle air filter Evolution Big Twin Screamin’ Eagle air filter Twin Cam (except 08-09 Dresser, 08-09 Dyna) Screamin’ Eagle air filter 04-09 XL Arlen Ness billet Sucker air filter Twin Cam (except 08-09 Dresser) Arlen Ness Stage 1 Big Sucker/Billet Sucker air filter for CV carb or Delphi EFI (except 08-09 Dresser) TANKS & OIL FILTERS DRAG SPECIALTIES # K&N REF. # OEM # 1011-0320 1011-1203 1011-0322 1011-0319 1011-0318 1011-0321 1011-0784 HD1499 HD8899 HD-1395 HD-1390 HD-2086X HD-1102 29461-99 29633-08 29462-99 29291-95 29259-91A, 29330-96 29259-86 29437-01 1011-1067 1011-0317 1011-0312 HD-8834 HD-1388 BU-1297 29331-04 29036-88/A/B, 29331-96 29239-96Y, P0213.9 67.95 65.95 54.95 1011-0313 1011-0314 1011-0315 1011-1204 1011-0316 1011-0528 1011-0783 1011-0528 E-3224 E-3225 E-3226 HD-0600 HD-0800 HD-0800 29244-08 29055-89 29442-99A 29044-04 29442-99A 31.95 31.95 31.95 52.95 45.95 47.95 64.95 47.95 1011-0528 HD-0800 29442-99A 47.95 All part numbers in BOLD MAGENTA are new for 2009. SUG. RETAIL $74.95 69.95 77.95 71.95 59.95 45.95 67.95 DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 379 SECTION 6 1011-0782 FILTER UPGRADE KITS WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS •Easy-to-install filter upgrade for Screamin’ Eagle air cleaners •PART #1011-1411 includes a 3” deep washable reusable filter element with 60% more surface area than the Screamin’ Eagle kit filter •PART #1011-0782 includes a specially designed, washable pleated fabric filter that is 5/8” deeper than the factory performance filter it is designed to replace – more surface area provides more airflow is achieved (9+%) and more power is the result •Required mounting hardware supplied with both kits PART # DESCRIPTION 1011-1411 For 08-09 FLHT, FLHR, FLHX and FLTR models with Screamin’ Eagle air cleaner kit OEM #29260-08 1011-0782 For 99-09 Twin Cam w/ Screamin’ Eagle air cleaner kit OEM #29440-99C (except 08-09 FLHT, FLHR, FLHX, FLTR) SUG. RETAIL $69.95 64.95 HIGH-FLOW AIR FILTER AND ADAPTER KIT •High-flow filter designed especially for Super E and G carburetors •Filter is 1” taller than standard filter and features a low-restriction, pre-oiled filter element •Allows for a 37% increase in airflow •Filter and adapters extend the teardrop housing out 1” for better exposure and a high-performance street racer look •Kit installs in minutes; no permanent modifications required NOTE: Not for use with S&S Super B or Super D carburetors, or Super E and G Kits for Buells. PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION 1011-0323 For S&S Super E and G carbs $49.95 1011-1337 Repl. element REPLACEMENT FILTER ELEMENT •Replacement 21/2” or 3” filter element for HSR42/45/48 carburetor SUG. RETAIL 20.95 SUG. PART # DESCRIPTION RETAIL HS42012-250 21/2” filter element $74.95 HS42/012-3003” filter element 74.95 AIR FILTER APPLICATIONS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 380 YEAR MODEL FOR BIG TWIN AND V-ROD 08-09 FLHT/FLHR/FLHX/FLTR TC Dyna 08-09 02-09 V-Rod 99-09 Twin Cam (carb), 01-08 Softail EFI, 02-07 Dresser EFI and 04-07 EFI Dyna Glide 99-01 88” Twin Cam Fuel-Injected Dressers 95-98 80” Evolution Fuel-Injected 95-99 80” Evolution International 93-00 80” Evolution (except Fuel Injected) 89-92 80” Evolution 86-89 80” Evolution 84-85 80” Evolution (except FLT, FLHT) 83-85 FLT and FLHT 82-83 FXR 80-82 FLT L78-84 FX, FL and FLH 77-E78 FX and FL (31/2” W) L75-76 FX, FL and FLH 67-E75 FX, FL and FLH 41-66 74”, 45” FOR XL 04-09 XL XL Evolution 88-03 XL XL Evolution 86-87 XL XL Evolution 83-85 XL 1000 83-85 XL XR 1000 (2 req’d) L78-82 XL 1000 L73-E75 XL 1000 (3” W) L75-E78 XL 1000 66-E73 XL 900, 1000 FOR BUELL 03-08 XB9/XB12/XB12S/SCG 04-08/XV12SS/STT 08/XB12R 04-08 00-08 Blast 96-02 S1, S2, S3, M2 (except 94-95 S1, 94-98 S2/S2T, 94-96 S3/S3T) FOR AFTERMARKET AIR CLEANERS Edelbrock repl. air filter Edelbrock dual carb air filter Evo reverse tapered: 7” dia. (top) x 61/4” dia. (base) x 23/4” (tall) Evo reverse tapered: 7” dia. (top) x 61/4” dia. (base) x 31/4” (tall) Early Evolution model Screamin’ Eagle air filter (w/ lid); 7” dia. (base) x 7” dia. (top) Late Evolution model Screamin’ Eagle air filter (no lid) Screaming Eagle filter for 08-09 Dyna Screaming Eagle filter for 08-09 FLT, FLHT, FLHR, FLHX, FLTR Twin Cam Screamin’ Eagle tapered air filter (except 08-09 Dresser/Dyna) (no lid); 51/2” dia. (top) x 61/4” dia. (base) Custom Evolution reverse tapered: 7” dia. (top) x 6” dia. (base) x 31/4” (tall) Screamin’ Eagle for 04-09 XL S&S dual-throat carb air filter S&S “D” teardrop air filter; 21/16” S&S Super E and G series carb air filter; 21/2” S&S old style teardrop-shaped housing; 6” x 23/16” air filter 6” custom air filter Dragtron™ air filter Dragtron™ II air filter Drag 7” round air filter (DS-288998) Indian filter 6” OD x 45/8” ID x 23/4” H fits stock S&S teardrop back and Indian teardrop cover (Indian cover not included) Mikuni 36-38mm dirt track air filter “D” Oval: 7” length; 10 ° angle; 21/8” flange 1 K&N # UNI # OEM # 1011-1289 1011-1435 1011-0332 HD-1499 HD-8899 HD-1395 HD-1396 HD-1390 HD-1390 HD-2086X HD-2084 HD-2078 HD-2078 HD-2078 HD-2076 HD-2075 HD-20 E-2470 1011-1345 DS-289499 DS-289511 DS-289507 DS-289506 DS-289508 DS-289503 DS-289503 DS-289503 DS-289501 DS-289500 DS-289502 29633-08 29191-08 29437-01 29461-99 29462-99 29291-95 29325-95A 29330-96 29259-89/91A 29259-86 29259-83A 29288-83 29255-78 29255-78 29255-78 29086-75 29086-73 29036-72 29036-41 1011-0532 HD-1388 HD-2085X HD-2076 RU-1371/RU-1371 HD-2078 HD-2075 HD-2076 HD-20 DS-289510 DS-289505 DS-289500 DS-289503 DS-289501 DS-289500 29331-04 29036-88A/88B/29331-96 29036-86 29036-72 29255-78 29086-73 29086-75 29036-72 1011-0328 BU-5000 BU-1297 1011-0658 NU-3428 P0213.0248 P0213.T - E-3250 E-3325 1011-1061 1011-1062 HD-0600 1011-1409 1011-1410 1011-0471 1011-0472 - 29055-89 - 1011-0557 1011-0533 1011-1068 E-3224 E3226 E-3225 DS-289057 - DS-289513 DS-289514 DS-289504 DS-289498 DS-289509 1011-1159 DS-289504 29442-990A/B/C/D 29044-04B - 1011-1278 1011-1121 - - RU-1371 is equipped for venting, while RU-137 is not. All part numbers in BOLD MAGENTA are new for 2009. SECTION 6 1011-0557 WINDSHIELDS 1011-1061 1011-0533 TOURING 1011-0328 1011-0332 LUGGAGE 1011-0532 1011-1435 SEATS & SISSY BARS 1011-1409 1011-1410 1011-1278 EXHAUST 1011-1289 1011-1121 E3226 HD-1499 HD-2086X ENGINE HD-1390 HD-1388 HD-8899 HD-1395 HIGH-FLOW REPLACEMENT AIR FILTERS TRANSMISSION & DRIVELINE •Designed to increase horsepower and torque •Accordion design provides increased surface area and optimum filtration •Application-specific sealing bead ensures an airtight fit •Original K&N High-Flow Technology •For cleaners and air filter care products see HARDWARE, CHEMICALS & TOOLS section •Made in the U.S.A. PART # 1011-0328 1011-0332 1011-0532 1011-0533 1011-0557 1011-1061 1011-1062 1011-1068 1011-1121 1011-1278 FUEL/AIR SYSTEMS SUG. RETAIL $61.95 68.95 70.95 64.95 55.95 62.95 63.95 54.95 51.95 59.95 PART # 1011-1289 1011-1409 1011-1410 1011-1435 BU-1297 BU-5000 DS-289057 E-2470 E-3224 E-3225 SUG. RETAIL $79.95 69.95 69.95 79.95 57.95 65.95 40.95 39.95 41.95 41.95 PART # E3226 E-3250 E-3325 HD-0600 HD-1388 HD-1390 HD-1395 HD-1396 HD-1499 HD-20 HD-20 SUG. RETAIL $43.95 43.95 36.95 53.95 73.95 67.95 75.95 69.95 81.95 48.95 PART # HD-2075 HD-2076 HD-2078 HD-2084 HD-2085X HD-2086X HD-8899 RU-137 RU-1371 SUG. RETAIL $50.95 51.95 53.95 49.95 48.95 50.95 85.95 46.95 46.95 GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES 1011-0472 1011-0658 1011-0471 1011-1159 BRAKES 1011-1345 DS-289498 TANKS & OIL FILTERS DS-289499 DS-289502 DS-289500 DS-289501 DASHES & GAUGES DS-289503 DS-289504 FRAMES, SUSPENSION & FENDERS DS-289505 AIR FILTER ELEMENTS DS-289507 DS-289506 DS-289508 NU-3428 DS-289509 •Top-quality replacement air filter elements from Uni, the OEM supplier to Harley-Davidson •Constructed of a unique, open-cell polyurethane material that allows maximum airflow while still providing superior filtration •Uni elements are available for a variety of Harley applications •For cleaners and air filter care products see HARDWARE, CHEMICALS & TOOLS section •Sold individually •Made in the U.S.A. PART # 1011-0471 1011-0472 1011-0658 1011-1159 1011-1345 DS-289498 SUG. RETAIL $46.95 35.95 33.95 22.95 37.95 22.95 PART # DS-289499 DS-289500 DS-289501 DS-289502 DS-289503 DS-289504 SUG. RETAIL $26.95 18.95 18.95 17.95 18.95 17.95 PART # DS-289505 DS-289506 DS-289507 DS-289508 DS-289509 DS-289510 SUG. RETAIL $18.95 18.95 18.95 18.95 17.95 24.95 All part numbers in BOLD MAGENTA are new for 2009. PART # DS-289511 DS-289513 DS-289514 NU-3428 FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS SUG. RETAIL $24.95 18.95 17.95 30.95 HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 381 SECTION 6 WINDSHIELDS TOURING 1010-0055 LUGGAGE SEATS & SISSY BARS 1010-0054 1010-0203 EXHAUST 1010-0209 FUEL/AIR SYSTEMS 90° SUPER-SUCKER INTAKE ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS •CNC-machined with a chrome finish •Features an integrated support bracket and breather system 1010-0204 •Patented washable breather filter included •Stack system measures 41/2" L with a 4" diameter •Mikuni adapter converts Wimmer Super-Sucker intakes for 99-07 88" Twin Cam with CV carb/Delphi EFI to fit 99-06 88" Twin Cam with HSR Mikuni carbs •Made in the U.S.A. PART # 1010-0054 1010-0055 1010-0203 DESCRIPTION SUG. RETAIL For HSR Mikuni, 92-99 80" Big Twin $598.95 For S&S E and G series, 92-99 80" Big Twin, S&S 96", 107" and 113" motors 598.95 For S&S E and G series, S&S 111"/117"/124" motors 598.95 PART # 1010-0056 1010-0204 1010-0209 DESCRIPTION For 99-07 CV/ Delphi EFI, Twin Cam Replacement mesh screen Mikuni adapter SUG. RETAIL $598.95 25.95 73.95 ELECTRICAL 1010-0050 1010-0048 1010-0204 LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES 1010-0209 BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS SUPER-SUCKER SHORTY INTAKE •CNC-machined with a chrome finish •Features an integrated support and breather system with washable filters •Tapered stack measures 31/4" L •Mikuni adapter converts Wimmer Super-Sucker shorty intakes for 99-07 88" Twin Cam with CV carb/ Delphi EFI to fit 99-06 88" Twin Cam with HSR Mikuni carbs •Made in the U.S.A. PART # 1010-0048 1010-0049 1010-0202 DESCRIPTION SUG. RETAIL For HSR Mikuni, 92-99 80" Big Twin $456.95 For S&S E and G series, 92-99 80" Big Twin, S&S 96", 107" and 13" motors 456.95 For S&S E and G series, S&S 111"/117"/124" motors 456.95 PART # 1010-0050 1010-0204 1010-0209 DESCRIPTION For 99-07 CV/ Delphi EFI, Twin Cam Replacement mesh screen Mikuni adapter FOOTRESTS & LICENSE PLATE FRAMES SUPER-SUCKER DUST COVER TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 382 SUG. RETAIL $456.95 25.95 73.95 1010-0208 1012-0032 1012-0033 RAIN SOCKS •Water-repellent rain sock helps keep water out of Wimmer Custom Cycle velocity stacks, intakes and filters PART # 1012-0032 1012-0033 1010-0208 DESCRIPTION For Super-Sucker long and shorty velocity stacks For HPF3-2 Super Filters For Spike air intakes SUG. RETAIL $15.95 25.95 25.95 •Keep dust and debris out of the air intake when storing or parking a bike NOTE: Cover is not breathable and should not be used on velocity stack when riding. PART # 1012-0031 All part numbers in BOLD MAGENTA are new for 2009. DESCRIPTION For all Super-Sucker long and shorty velocity stacks SUG. RETAIL $15.95 SECTION 6 WINDSHIELDS TOURING LUGGAGE DS-288846 SEATS & SISSY BARS DS-288279 EXHAUST FUEL/AIR SYSTEMS VELOCITY STACK •Polished billet aluminum for that hot rod look •Includes screen and all mounting hardware •Made in the U.S.A. PART # DESCRIPTION DS-288846 Mikuni HSR42 carb 99-06 Twin Cam DS-288843 Mikuni HSR42 carb 92-99 Evolution Big Twin DS-288499 S&S E and G carburetor 99-06 88" Twin Cam DS-288279 S&S E and G carburetor 93-99 80" Evolution Big Twin DS-288279 SUG. RETAIL $169.95 169.95 189.95 189.95 ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS DRAG STACK ELECTRICAL •A must-have for performance •Precision CNC-machined from 6061 T-6 solid bar •Overall length is 2"; internal bore is angled at 3° •Features full 180° of front edge rollover for optimal vortex action •Made in the U.S.A. PART # 1010-0110 DESCRIPTION For S&S Super D carburetor 7807-0005 SUG. RETAIL $79.95 LIGHTING HANDLEBARS, CONTROLS & MIRRORS 7807-0006 CABLES BRAKES TANKS & OIL FILTERS 7807-0008 DASHES & GAUGES FRAMES, SUSPENSION & FENDERS CHROME VELOCITY STACKS •Feature a one-piece breather/support bracket •No external breather lines are necessary •Available in short or long style •Includes velocity stack with screen, breather support bracket and hardware FOOTRESTS & LICENSE PLATE FRAMES PRO-MOD BREATHER FOR 93-09 BIG TWIN PART # SHORT 7807-0004 7807-0005 7807-0006 LONG 7807-0007 7807-0008 7807-0009 DESCRIPTION SUG. RETAIL For 40mm CV carb or 01-09 Delphi EFI (except 08-09 FLHT, FLHR, FLTR, FLHX) For S&S E and G carb For Mikuni 42/45/48 carb $345.95 345.95 377.95 For 40mm CV carb or 01-09 Delphi EFI (except 08-09 FLHT, FLHR, FLTR, FLHX) For S&S E and G carb For Mikuni 42/45/48 carb 372.95 372.95 404.95 •Breather kit includes a breather bracket, which features a hidden internal vent, a mini velocity stack and chrome finish •Includes a screen to keep large particles out of the engine •Made in the U.S.A. PART # 1010-0133 All part numbers in BOLD MAGENTA are new for 2009. DESCRIPTION SUG. RETAIL For 93-09 Big Twin w/ CV Carb or Delphi fuel injection (except 08-09 Dressers) $173.95 TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 383 SECTION 6 WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS EXHAUST NOSTALGIA VELOCITY STACKS •High-velocity stacks include backing plate with breathers and screen •CNC-machined billet aluminum •Available in chrome or black anodized finish 1010-0318 •All mounting hardware included •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL CHROME 1010-0319 For 93-06 Big Twin w/ CV carb, 01-09 Big Twin w/ Delphi EFI (except 08-09 Dresser) $441.95 1010-0318 For 99-06 Twin Cam models w/ S&S E/G carb 441.95 FUEL/AIR SYSTEMS 1010-0320 PART # DESCRIPTION BLACK ANODIZED 1010-0321 For 93-06 Big Twin w/ CV carb, 01-09 Big Twin w/ Delphi EFI (except 08-09 Dresser) 1010-0320 For 99-06 Twin Cam models w/ S&S E/G carb SUG. RETAIL $369.95 369.95 1010-0306 DRAGSTAK INTAKE ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS •CNC billet aluminum construction •Inside cone deflects air for improved performance •4.375" overall length; 5" diameter mouth •Optional water-repellent cover also available PART # DESCRIPTION FOR S & S E/G CARBURETORS 1010-0306 Satin Dragstak 1010-0307 Chrome Dragstak 1010-0307 SUG. RETAIL $230.95 230.95 PART # DESCRIPTION FOR S & S E/G CARBURETORS (CONT) 1011-1041 Optional Dragstak cover 1011-1041 SUG. RETAIL $27.95 ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES 2106-1008 4" DEATH STACKS •Chrome billet aluminum velocity stacks •Incorporate crankcase breathers into the mounting brackets •Stacks screw onto mounting brackets for clean installation PART # DESCRIPTION SUG. RETAIL 2106-1008 For Mikuni HSR 42/45/48 carbs, 93-99 80" Evolution $326.95 2106-1009 For S&S E and G carbs, 93-99 80" Evolution 326.95 VELOCITY STACK SCREEN •Rubber ring with stainless screen •Fits all velocity stacks with a 4" mouth •Sold each PART # DESCRIPTION 1010-0265 4" screen TANKS & OIL FILTERS SUG. RETAIL $29.95 1010-0263/1013-0013 DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES DIRECT BOLT-ON VELOCITY STACKS •Chrome-plated 1010-0046 billet aluminum •Bolts on from the rear •Includes one mounting screw and internal screen PART # 1010-0046 1010-0264 DESCRIPTION 4" for S&S E and G carbs 4" for S&S D carbs 1010-0264 SUG. RETAIL $220.95 218.95 TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 384 VELOCITY STACK •41/2" stack is CNC-machined from billet aluminum and hand polished •Made in the U.S.A. PART # DESCRIPTION 1010-0043 For S&S Super E and G carbs SUG. RETAIL $218.95 BILLET CARBURETOR SUPPORT BRACKET AND VELOCITY STACK •CNC-machined from billet aluminum and polished to match the motor •Bracket has been designed to mount to the cylinder heads and hold the carburetor in place •Velocity stack mounts to the bracket; one-piece design so spacers are not required; filter screen and stainless steel hardware included •Support bracket and velocity stack sold separately PART # DESCRIPTION SUG. RETAIL FOR PATRICK RACING 128" MOTORS 1013-0013 Carburetor support bracket $149.95 1010-0263 Velocity stack 249.95 All part numbers in BOLD MAGENTA are new for 2009. SECTION 6 WINDSHIELDS TOURING DS-288866 1012-0085 SEATS & SISSY BARS VELOCITY STACKS •CNC-machined billet T-6 aluminum with a chrome or black finish •Hidden mounting design for a clean custom look •High-volume air flow for increased horsepower •Come with debris-catching screen and mounting hardware •Available in a variety of applications •Require the use of an air cleaner brace (sold separately) •Patent pending VELOCITY STACKS WITH SUPPORT BRACKET •CNC-machined T-6 billet aluminum with a chrome or black finish •Feature a one-piece support bracket/breather •Hidden mounting-bolt design for the clean custom look •High-volume airflow for increased horsepower •Come with debris-catching screen and mounting hardware •Breather bolts sold separately PART # CHROME 2110-0630 2110-0640 2110-0650 DESCRIPTION SUG. RETAIL For S&S E/G carb, 99-06 Twin Cam, chrome For S&S E/G carb, 92-99 Big Twin, chrome For 40mm CV carb, 99-06 Twin Cam, 01-05 EFI Softail, 04-05 EFI Dyna and 02-05 EFI FLT, chrome For 40mm CV carb, 93-99 Big Twin, chrome For HSR 42/45 Mikuni carb, 99-06 Twin Cam, chrome For HSR 42/45 Mikuni carb, 93-99 Big Twin, chrome $279.95 279.95 For S&S E/G carb, 99-06 Twin Cam, black For S&S E/G carb, 92-99 Big Twin, black For 40mm CV carb, 99-06 Twin Cam, 01-05 EFI Softail, 04-05 EFI Dyna and 02-05 EFI FLT, black 1012-0076 For 40mm CV carb, 93-99 Big Twin, black 1012-0077 For HSR 42/45 Mikuni carb, 99-06 Twin Cam, black 1012-0078 For HSR 42/45 Mikuni carb, 93-99 Big Twin, black ACCESSORIES 1012-0034 92-99 Evolution bolt kit for Novello velocity stacks for Mikuni carbs 1012-0035 99-06 Twin Cam bolt kit for Novello velocity stacks for Mikuni carbs 2110-9696 Repl. screen 365.95 365.95 2110-0790 2110-0660 2110-0670 BLACK 1012-0088 1012-0074 1012-0075 LUGGAGE 1012-0088 2110-0630 279.95 279.95 279.95 279.95 EXHAUST FUEL/AIR SYSTEMS PART # DESCRIPTION SUG. RETAIL CHROME DS-288866 For S&S E/G carbs, chrome $173.95 DS-288867 For 40mm CV carbs or Delphi EFI systems, chrome 173.95 DS-288868 For HSR 42mm carbs, chrome 173.95 BLACK 1012-0085 For S&S E/G carbs, black 173.95 1012-0086 For 40mm CV carbs or Delphi EFI systems, black 173.95 1012-0087 For HSR 42mm carbs, black 173.95 ACCESSORIES DS-288869 Repl. screen 2.95 ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL 365.95 365.95 365.95 365.95 LIGHTING 79.95 HANDLEBARS, CONTROLS & MIRRORS 79.95 5.95 VELOCITY STACKS CABLES •CNC-machined and given a brilliant chrome finish •Fit Patrick Racing dual Mikuni 42mm carburetors •Made in the U.S.A. PART # 1010-0309 DESCRIPTION Velocity stacks SUG. RETAIL $399.95 BRAKES DUAL VELOCITY STACKS •Chrome CNC-machined T-6 billet aluminum •Screw to the mounting base for the clean custom look •High-volume airflow for increased horsepower •Include debris-catching screens •Available in short and long versions •Fit dual 42mm Mikuni carb kits •Made in the U.S.A. PART # 2110-0690 2110-0069 2110-9696 DESCRIPTION Short dual velocity stacks (2.4") Long dual velocity stacks (3.6") Repl. screen TANKS & OIL FILTERS 2110-0069 DASHES & GAUGES FRAMES, SUSPENSION & FENDERS SUG. RETAIL $203.95 248.95 5.95 FOOTRESTS & LICENSE PLATE FRAMES DUAL VELOCITY STACKS •Improve bottom, midrange and top-end torque and horsepower •For use with stock or modified motors •Chrome-plated finish •Include intake screens •Made in the U.S.A. PART # DESCRIPTION 1010-0315 For 42mm dual Mikuni carburetors TIRES, TUBES & WHEELS AMBUSH INTAKE FOR S&S SUPER E AND G CARBURETOR HARDWARE, CHEMICALS & TOOLS •Fits all S&S E and G carburetors •Cool custom style like you've never seen before •Highly polished chrome-plated finish •Requires use of a carburetor support (sold separately) SUG. RETAIL $177.95 PART # 1010-0109 DESCRIPTION Custom intake for S&S E & G carburetors All part numbers in BOLD MAGENTA are new for 2009. SUG. RETAIL $77.95 COVERS, SECURITY & GENERAL 385 SECTION 6 WINDSHIELDS TOURING LUGGAGE SEATS & SISSY BARS 1023-0001 DS-289355 EXHAUST 0706-0017/1023-0008 FUEL/AIR SYSTEMS ENGINE DS-289363 TRANSMISSION & DRIVELINE 2211-0030 GASKETS & SEALS DS-289357 1023-0015 ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 386 PERFORMER RPM WET NITROUS SYSTEMS DS-289387 •Nitrous oxide provides serious horsepower at the push of a button •Easiest way to get a huge horsepower increase; adjustable jetting for 20, 25, 30 or 35 horsepower •Complete kits are specifically designed for individual applications •To prevent the chance of detonation and costly engine damage, an electronic module and rpm sensor prevent nitrous activation below 4300 rpm •Activation of nitrous at a low rpm is the cause of most engine failures with other systems; this is eliminated with the Performer system •The Performer system activates the fuel solenoid just before the nitrous solenoid for a more accurate delivery of fuel and nitrous and more reliable use •Stainless steel jets will not erode like brass jets found in other systems •Require the purchase of the correct nitrous plate for your carburetor or throttle body; carbureted applicaton should have a dual-outlet petcock installed; sold separately •2-lb. bottle kits come complete with all brackets and hardware •12 oz. bottle kits require correct mounting brackets; sold separately •Optional Double Bottle kit allows a second 12 oz. bottle to be added to existing 12 oz. nitrous kit; includes bottle, bottle bracket, hose and special tee fitting – requires correct side frame brackets (sold separately) •All bottles feature a highly polished finish •Optional adjustable nitrous control module has two rpm settings; first setting controls the rpm level when the nitrous is activated, and the second controls the rpm level when it is deactivated; tuner can select both minimum and maximum rpm settings NOTE: Delphi fuel-injected bikes require the purchase of PART #1023-0015. NOTE: 04-06 models require inductive rpm sensor PART #2211-0030 for installation of Edelbrock Wet Nitrous systems. PART # DESCRIPTION SUG. RETAIL PART # DESCRIPTION SUG. NITROUS SYSTEMS MOUNTING BRACKETS FOR 12 OZ. BOTTLE ONLY DS-289359 Kit w/ 12 oz. bottle for 00-06 Softail $1,259.95 (2 REQUIRED PER BOTTLE) (CONT) 11/2” frame bracket (ea.) DS-289360 Kit w/ 2 lb. bottle for 00-06 Softail 1,384.95 DS-289375 13/8” frame bracket (ea.) DS-289355 Kit w/ 12 oz. bottle for 84-99 Softail 1,269.95 1023-0003 DS-289356 Kit w/ 2 lb. bottle for 84-99 Softail 1,398.95 OPTIONAL/REPLACEMENT COMPONENTS Adjustable nitrous control module DS-289357 Kit w/ 12 oz. bottle for 99-05 Dyna 1,238.95 1023-0004 “Double Bottle” 12 oz. bottle kit DS-289358 Kit w/ 2 lb. bottle for 99-05 Dyna 1,369.95 DS-289387 Taper face jet .024” (ea.) DS-289353 Kit w/ 12 oz. bottle for 91-98 Dyna 1,203.95 DS-289377 Taper face jet .026” (ea.) DS-289354 Kit w/ 2 lb. bottle for 91-98 Dyna 1,334.95 DS-289378 Taper face jet .028” (ea.) DS-289351 Kit w/ 12 oz. bottle for 84-94 FXR 1,212.95 DS-289379 Taper face jet .030” (ea.) DS-289352 Kit w/ 2 lb. bottle for 84-94 FXR 1,344.95 DS-289380 Taper face jet .034” (ea.) 1023-0001 Kit w/ 2 lb. bottle for 84-98 Evo Dresser 1,477.95 DS-289381 Repl. nitrous solenoid 1023-0002 Kit w/ 2 lb. bottle for 99-06 Twin Cam Dresser 1,481.95 DS-289367 Repl. fuel solenoid 1023-0005 Kit w/ 12 oz. bottle for 95-03 XL 1,205.95 DS-289368 Nitrous solenoid repair kit 1023-0007 Kit w/ 2 lb. bottle for 95-03 XL 1,360.95 DS-289369 DS-289370 Fuel solenoid repair kit NITROUS PLATES DS-289371 2 lb. polished bottle only DS-289361 For OEM Keihin CV, 40/42mm Mikuni, Edelbrock spigot mount carb 121.96 DS-289372 12 oz. polished bottle only DS-289362 For OEM 44mm Screamin’ Eagle, 45mm Mikuni DS-289388 12 oz. bottle brackets (ea.) spigot mount carb 123.95 DS-289382 Glycerin-filled nitrous pressure gauge (0-1400 psi) DS-289363 For S&S E series, Edelbrock flange mount carb 95.95 DS-289383 #4 AN purge/gauge adapter DS-289364 For S&S G series flange mount carb 96.95 DS-289384 Repl. fuel filter DS-289365 For S&S D series flange mount carb 96.95 DS-289385 Repl. fuel pump 1023-0015 For 01-05 Delphi fuel injection 214.95 0706-0017 10” -3 AN red fuel line MOUNTING BRACKETS FOR 12 OZ. BOTTLE ONLY (2 REQUIRED PER BOTTLE) 1023-0008 10” -3 AN nitrous line DS-289373 11/8” frame bracket (ea.) 48.95 2211-0030 Inductive rpm sensor DS-289374 11/4” frame bracket (ea.) 45.95 All part numbers in BOLD MAGENTA are new for 2009. RETAIL $45.95 45.95 231.95 308.95 8.95 8.95 8.95 8.95 8.95 107.95 82.95 41.95 41.95 214.95 201.95 64.95 74.95 22.95 47.95 182.95 24.95 26.95 74.95 SECTION 6 WINDSHIELDS 1023-0010 1023-0012 TOURING LUGGAGE THUNDERMAX NADS (NITROUS ASSIST DRY SYSTEM) •Adds up to 30 horsepower in 30 minutes •Delivered 95% prebuilt and ready to install; no bulky fuel pumps, fuel lines or sandwich plates required •ThunderMax "dry" system works with the ThunderMax ECM (sold separately) to deliver the extra fuel required through the fuel-injection system whenever nitrous is activated; bulkier "wet" systems usually use a second outlet from the gas tank and a pump to supply the required pressure •Once the arming switch is turned on, the ThunderMax ECM activates the nitrous and extra fuel after three parameters are met: bike speed, rpm and throttle open •The NADS kit includes the air cleaner backplate, nitrous solenoid, spray nozzle, arming switch assembly, air filter and nitrous line •Model-specific bracket/bottle kits mount the nitrous bottle to the front frame downtube, requiring only a single line to be run from the nitrous tank to the solenoid on the air cleaner backplate •NADS kit and bracket/bottle kits are sold separately •Compatible with ThunderMax Open or Closed Loop Systems •Maps available online at www.thunder-max.com NOTE: Legal in California only for racing vehicles which may never be used upon a highway. PART # DESCRIPTION FOR 01-06 BIG TWIN MODELS EQUIPPED WITH DELPHI EFI 1023-0010 NADS kit 1023-0011 FLT bracket and 12 oz. bottle kit 1023-0012 FXST bracket and 12 oz. bottle kit 1023-0013 FXD bracket and 12 oz. bottle kit SUG. RETAIL $669.95 367.95 367.95 367.95 PART # DESCRIPTION SUG. RETAIL FOR 01-06 BIG TWIN MODELS EQUIPPED WITH DELPHI EFI (CONT) 1023-0014 12 oz. nitrous bottle only $214.95 1020-0324 Data port "Y" harness (required if using NADS w/ ThunderMax Auto-Tune closed loop module) 34.95 SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS NITROUS CONVERSION KIT REFILL PUMP STATION •Designed for performance retailers in the business of nitrous bottles •Quick, safe, easy and only takes a couple of minutes to refill bottles •Compressed air operated; requires no electricity •Kit includes plumbing, hoses, valve, fittings and bottle stand that transfers nitrous from mother bottle to receiving bottle instantly NOTE: Refill station will require three to four items not included with the kit. 1. Compressed air supply (80-100 psi). 2. Mother bottle (available through local gas supplier). 3. Scale (bottles are filled by weight). 4. A water separator/filter (this will help pump service life). PART # 7807-0035 DESCRIPTION NOS refill pump station SUG. RETAIL $1,550.95 •Designed to adapt your existing 2-lb. non-dresser nitrous kit to EVO and Twin Cam dressers (with fiberglass bags) •Includes everything you need to install Edelbrock's 2-lb. DOT-approved polished nitrous bottle •Allows you to install the bottle inside a saddlebag for a "hidden" installation •Includes all necessary brackets, hoses and fittings for the conversion •2-lb. bottle not included PART # 1023-0006 All part numbers in BOLD MAGENTA are new for 2009. DESCRIPTION For 84-06 Big Twin dressers SUG. RETAIL $264.95 FOOTRESTS & LICENSE PLATE FRAMES TIRES, TUBES & WHEELS HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL 387