Download User manual of DS-2CZ2182P/N
Transcript
Color Zoom Camera User Manual V2.2.0 Color Zoom Camera· User Manual Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. This manual applies to DS-2CZ2114P(N), DS-2CZ2132P(N), DS-2CZ2152P(N), DS-2CZ2152P-IRA, DS-2CZ2182P(N), DS-2CZ2192P(N), DS-2CZ2182P-WD, DS-2CZ2192P-WD zoom Cameras. This manual may contain several technical incorrect places or printing errors, and the content is subject to change without notice. The updates will be added to the new version of this manual. We will readily improve or update the products or procedures described in the manual. DISCLAIMER STATEMENT “Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested for fire, shock or casualty hazards as outlined in UL’s Standard(s) for Safety, UL60950-1. UL Certification does not cover the performance or reliability of the security or signaling aspects of this product. UL MAKES NO REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.” 1 Color Zoom Camera· User Manual Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC Conditions This device complies w ith part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC. 2 Color Zoom Camera· User Manual 2002/96/EC (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info. 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked w ith this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info. 3 Color Zoom Camera· User Manual Safety Warnings and Cautions Please pay attention to the following warnings and cautions: Hazardous Voltage may be present: Special measures and precautions must be taken when using this device. Some potentials (voltages) on the device may present a hazard to the user. This device should only be used by Employees from our company with knowledge and training in working with these types of devices that contain live circuits. Power Supply Hazardous Voltage: AC mains voltages are present w ithin the power supply assembly. This device must be connected to a UL approved, completely enclosed power supply, of the proper rated voltage and current. No user serviceable parts inside the power supply. System Grounding (Earthing): To avoid shock, ensure that all AC w iring is not exposed and that the earth grounding is maintained. Ensure that any equipment to which this device will be 4 Color Zoom Camera· User Manual attached is also connected to properly wired grounded receptacles and are approved medical devices. Power Connect and Disconnect: The AC power supply cord is the main disconnect device to mains (AC power).The socket outlet shall be installed near the equipment and shall be readily accessible. Installation and Maintenance: Do not connect/disconnect any cables to or perform installation/maintenance on this device during an electrical storm. Power Cord Requirements: The connector that plugs into the wall outlet must be a grounding-type male plug designed for use in your region. It must have certification marks showing certification by an agency in your region. The connector that plugs into the AC receptacle on the power supply must be an IEC 320, sheet C13, female connector. See the following website for more information http://kropla.com/electric2.htm. Lithium Battery: This device contains a Lithium Battery. There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the vendor’s instructions and in accordance with local environmental regulations. 5 Color Zoom Camera· User Manual Perchlorate Material: Special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. This notice is required by California Code of Regulations, Title 22, Division 4.5, Chapter 33: Best Management Practices for Perchlorate Materials. This device includes a battery which contains perchlorate material. Taiwan battery recycling: Please recycle batteries. Thermal and Mechanical Injury: Some components such as heat sinks, power regulators, and processors may be hot; care should be taken to avoid contact with these components. Electro Magnetic Interference: This equipment has not been tested for compliance with emissions limits of FCC and similar international regulations. This device is not, and may not be, offered for sale or lease, or sold, or leased until authorization from the United States FCC or its equivalent in other countries has been obtained. Use of this equipment in a residential location is prohibited. This equipment generates, uses and can radiate radio frequency energy which may result in harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is required to take measures to eliminate the interference or discontinue the use of this equipment. 6 Color Zoom Camera· User Manual Lead Content: Please recycle this device in a responsible manner. Refer to local environmental regulations for proper recycling; do not dispose of device in unsorted municipal waste. 7 Color Zoom Camera· User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions” Warnings: Serious injury or death may occur if any of the warnings are neglected. Cautions: Injury or equipment damage may occur if any of the cautions are neglected. Warnings Follow these Cautions Follow these safeguards to prevent precautions to prevent serious injury or death. potential injury or material damage. Warnings Please adopt the power adapter which can meet the safety extra low voltage (SELV) request. And source with 12V DC according to the IEC60950-1 and Limited Power Source standard. If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the camera yourself. (We shall not assume any 8 Color Zoom Camera· User Manual responsibility for problems caused by unauthorized repair or maintenance.) To reduce the risk of fire or electrical shock, do not expose this product to rain or moisture. This installation should be made by a qualified service person and should conform to all local codes. Please install blackouts equipment into the power supply circuit for convenient supply interruption. Please make sure that the ceiling can support more than 50(N) Newton gravities if the camera is fixed to the ceiling. Cautions Make sure the power supply voltage is correct before using the camera. Do not drop the camera or subject it to physical shock. Do not touch sensor modules w ith fingers. If cleaning is necessary, use a clean cloth with a bit of ethanol and wipe it gently. If the camera w ill not be used for an extended period of time, put on the lens cap to protect the sensor from dirt. Do not aim the camera at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and affecting the endurance of sensor at the same time. 9 Color Zoom Camera· User Manual The sensor may be burned out by a laser beam, so when any laser equipment is being used, make sure that the surface of the sensor will not be exposed to the laser beam. Do not place the camera in extremely hot or cold temperatures (the operating temperature should be between -10°C ~ 60° C, dusty or damp locations, and do not expose it to high electromagnetic radiation. To avoid heat accumulation, good ventilation is required for a proper operating environment. Do not let water and any liquid flow into the camera. While shipping, the camera should be packed in its original packing, or packing of the same texture. Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer. 10 Color Zoom Camera· User Manual Table of Contents 1 Introduction ........................................................................1 1.1 Product Features ...................................................... 1 1.2 Function Summary ................................................... 2 1.3 Application ............................................................... 5 2 Hardware Overview ............................................................6 2.1 Lens......................................................................... 6 2.1 Side Panel ................................................................ 6 2.2 Connections ............................................................. 8 2.2.1 Rear Panel Definition ....................................... 8 2.2.2 I/O Interfaces Description ............................. 10 2.2.3 Power supply................................................. 12 2.2.4 Installation.................................................... 12 3 Menu Functions .................................................................15 3.1 Menu Button Operation .......................................... 15 3.2 OSD Menu Configuration ........................................ 16 3.2.1 Main Menu Overview ..................................... 17 3.2.2 CAM ID Setting (Camera ID) ......................... 19 3.2.3 IRIS Setting .................................................. 20 3.2.4 BLC/WDR Setting (Back Light Compensation/Wide Dynamic Range) .......................... 21 3.2.5 SHUTTER Setting........................................... 23 3.2.6 AGC Setting (Auto Gain Control).................... 24 3.2.7 WB Setting (White Balance) .......................... 25 3.2.8 FOCUS Setting .............................................. 27 3.2.9 D/N Setting (Day/Night) ................................ 28 3.2.10 VIDEO Parameters Setting........................... 30 3.2.11 SPECIAL Functions Setting .......................... 32 11 Color Zoom Camera· User Manual 3.2.12 EXIT ........................................................... 38 Appendix...............................................................................40 Table 1 DS-2CZ2132P(N) ............................................. 40 Table 2 DS-2CZ2152P(N) ............................................. 43 Table 3 DS-2CZ2152P(N)-IRA....................................... 46 Table 4 DS-2CZ2182P(N) ............................................. 49 Table 5 DS-2CZ2192P(N) ............................................. 52 Table 6 DS-2CZ2182P(N)-WD ....................................... 55 Table 7 DS-2CZ2192P(N)-WD ....................................... 58 Table 8 DS-2CZ2114P(N) ............................................. 61 12 Color Zoom Camera· User Manual 1 Introduction 1.1 Product Features DS-2CZ2114P(N), DS-2CZ2132P(N), DS-2CZ2152P(N), DS-2CZ2152P-IRA, DS-2CZ2182P(N), DS-2CZ2192P(N), DS-2CZ2182P-WD, DS-2CZ2192P-WD series are high performance cameras which adopt advanced print circuit board design technology, possess of high resolutio n, lower distortion, and lower noise features. They are extremely suitable for surveillance system and image process system. High performance SONY CCD. High resolution. This camera series provide high resolution up to Color 650TVL and B/W 700TVL for ensuring clear image. Low illumination. The 2132 camera model supports Day Night Auto Switch. The 2114/2152/2182/2192 camera models support IR cut filter w ith auto switch. The IR distance of the DS-2CZ2152P-IRA is up to 100M. Support RS-485 control and ZCF wiring control. BLC (Back light Compensation). Auto-focus algorithm with self-owned intellectual property. Support OSD menu and parameters configuration. High S/N ratio. Auto iris and auto electronic shutter. 1 Color Zoom Camera· User Manual 3D-Digital Noise Reduction (3D-DNR). Electronic image stabilization (EIS). DS-2CZ2182/2192P-WD camera models support Wide Dynamic Range. 1.2 Function Summary Motion Detection: In the user-defined motion detection surveillance area, the moving object can be detected and trigger alarm. The sensitive level can be customized according to the environment. Privacy Mask: This function allows you to block or mask certain area of a scene, thus prevent the personal privacy from recording or live viewing. Figure 1-1 Privacy Mask 2 Color Zoom Camera· User Manual DAY/NIGHT Auto Switch: The cameras deliver color images during the day. And as light diminishes at night, the cameras switch to night mode and deliver black and white images with high quality. AGC: AGC is a control circuit that automatically changes the gain of a receiver or other piece of equipment, so that the desired output signal remains essentially. When under low illumination, AGC will regulate the gain and amplification of the video signal. S/N ratio: It is the ratio of Signal voltage and noise voltage. The ratio is larger, the effect of noise is less, and the image is clearer. OSD (On Screen Display): The on-screen display (abbreviated OSD) is an image superimposed on a screen picture, used for displaying information and menu. Synchronous System: Synchronization of the camera usually contains power synchronization and internal synchronization. Internal synchronization is realized by the synchronous signal which is generated by the inside crystal oscillator. White Balance: White balance can remove the unrealistic color casts. White balance is the white rendition function of the camera to adjust the color temperature according to the environment automatically. ICR Auto Switch: The filter w ill filter infrared light during the daytime and change to normal filter at night to ensure a high sensitivity and clear image. BLC: If you focus on an object against strong backlight, the object will be too dark to be seen clearly. The BLC (Backlight Compensation) function can compensate light to the object in the 3 Color Zoom Camera· User Manual front to make it clear, but this causes the over-exposure of the background where the light is strong. Figure 1-2 BLC OFF and BLC ON WDR (Wide Dynamic Range): The wide dynamic range (WDR) function helps the camera provide clear images even under back light circumstances. When there are both very bright and very dark areas simultaneously in the field of view, WDR balances the brightness level of the whole image and provide clear images w ith details. EIS (Electronic Image Stabilization): Electronic image stabilization function can reduce certain ranges of vibration which is caused by the external environment. 3D Digital Noise Reduction: Comparing with the general 2D digital noise reduction, the 3D digital noise reduction function processes the noise initiated by CCD besides processing the noise in the separated Y video signal and C video signal. 4 Color Zoom Camera· User Manual 1.3 Application The product is applicable to the large-sized monitoring scenes, such as large warehouse, surrounding area of residential district, dock, plaza, school, station, park, etc. 5 Color Zoom Camera· User Manual 2 Hardware Overview 2.1 Lens The lens is integrated in the camera. The focal length of the 2132 camera is 3.9-85.8mm, the focal length of 2114 camera is 4.7-84.6mm, the focal length of 2152 camera is 3.84-88.4mm, the focal length of 2182 camera is 3.4-102mm and the focal length of 2192 camera is 3.3-119mm. 2.2 Side Panel Figure 2-1 DS-2CZ2132P(N) Side Panel 6 Color Zoom Camera· User Manual Figure 2-2 DS-2CZ215(8)(9)2P(N)-(WD) Side Panel Figure 2-3 DS-2CZ2152P-IRA Side Panel 7 Color Zoom Camera· User Manual 2.3 Connections 2.3.1 Rear Panel Definition Figure 2-4 DS-2CZ2132P(N), DS-2CZ2152P(N), DS-2CZ2182P(N), DS-2CZ2912P(N) Rear Panel Definition 8 Color Zoom Camera· User Manual Figure 2-5 DS-2CZ2152P-IRA wiring definition Table 2-1 DS-2CZ2152P-IRA Interfaces Description No. Name Description 1 GND GND Interface 2 Power 12V DC Power Supply 3 ZCF Zoom and Focus control interfaces Video Video Output Interfaces 4 5 Output RS-485 D+,D- Control Signal Input 9 Color Zoom Camera· User Manual 2.3.2 I/O Interfaces Description The interfaces description of DS-2CZ21X2P(N) are as follows: Table 2-2 DS-2CZ21X2P(N) interfaces description Pin No. Name Description ZOOM (Wire Control Interface) Lens Zoom Adjustment COM (Wire Control Interface) Common Interface for the Pins No. 1 and No. 3 FOCUS (Wire Control Interface) Focus Adjustment IN/GND Trigger Interface of the Day/Night sw itching/GND Interface OUT/COM Alarm Output/Common Interface 10 Color Zoom Camera· User Manual RS-485 External Control Signal Input D+/RS-485 DGND GND Interface Note: The working voltage of Z interface is +3V ~ +12V or -3V ~ -12V. The working voltage of F interface is +3V to +12V or - 3V to -12V. The maximum drive voltage and current of the alarm output interface (with the Open Collector inside) is 24VDC and 45mA. Zoom/Focus Remote Control Purpose: You can route the cable from the RS-485 signal output connector of your control device to the RS-485 signal input connector of the camera. Then use the control device to adjust the lens remotely. The RS-485 connector supports PELCO-D protocol. The default setting requirements are: The baud rate is 2400bit/s. The protocol is PELCO-D. 11 Color Zoom Camera· User Manual The data bit is 8bit. The stop bit is 1bit. The parity bit is none. Day/Night in, GND, Alarm output, Alarm output Com You can use the 4-IN interface to trigger the switching between the Day mode and Night mode. Connect an alarm output device to the 6-OUT interface . The motion detection can trigger a larm output. 2.3.3 Power supply Connect the supplied power adapter to the power supply connector . Make sure that the power indicator is in solid red. Note: Please make sure that the power adapter can match with the camera. The standard power supply of the camera is usually 12V DC (Please refer to technical specifications for more details). 2.3.4 Installation Before mounting, please make sure that the device in the package is in good condition and all the assembly parts are complete. Note: Please ensure that the wall is strong enough to withstand three times the weight of the camera and then install the camera 12 Color Zoom Camera· User Manual securely. If the wall is not strong enough, the camera may fall and cause serious damage. There are two mounting methods for box camera: wall mounting and ceiling mounting. You can choose one method on your demand. We take ceiling mounting for example to introduce the mounting steps. Wall mounting steps are the same. Steps: 1. Drill mounting holes on the ceiling. 2. Align the holes of the mount with the mounting holes o n the ceiling. 3. Secure the mount to the ceiling with self-tapping screws. Note: Please use expansion screws if the camera is mounted to cement wall. 4. Align the mount adapter of the camera with the mount. 5. Rotate the camera clockwise to secure the camera with the mount. 6. Route the cables and v iew the camera image using the monitor. 7. Adjust the azimuth angle of the image . 8. Tighten the knob on the mount to fix the angle of the camera. 13 Color Zoom Camera· User Manual Figure 2-6 Installing the Camera 14 Color Zoom Camera· User Manual 3 Menu Functions The menu functions of the DS-2CZ21X2P/N are introduced in this chapter. The first part is the instruction of the menu buttons, the second part is the instruction of the menu configuration of all the items. Note: To configure the menu function of the DS-2CZ2152P-IRA model, you have to use the control device to send RS-485 signals to call the 95 preset. 3.1 Menu Button Operation Figure 3-1 the Buttons of Camera There are two working modes for the setting buttons: common and Menu modes. Common mode: T/W buttons: You can press them to zoom out and in. N/F buttons: You can press them to focus near and far. 15 Color Zoom Camera· User Manual Menu button: Pressing the MENU button for 2 seconds, you can enter the menu mode. The main menu displays on the screen. Menu mode: T/W button: You can use these buttons to move the cursor up/down. N/F button: You can use these buttons to switch options. Menu button: You can use this button to enter or exit the submenu. 3.2 OSD Menu Configuration Press the menu button for 2 seconds to enter the main menu. Refer to the Figure 3-2. The menu items are on the left. The options are on the right. “…” means there is a submenu you can enter. “---” means this menu is not available. 16 Color Zoom Camera· User Manual MAIN MENU CAM ID OFF IRIS ALC BLC/WDR BLC… SHUTTER AUTO AGC --- WB ATW2 FOCUS AF. . . D/N AUTO… VIDEO SET ... SPEC IAL ... EXIT QUIT Figure 3-2 Main Menu 3.2.1 Main Menu Overview Table 3-1 Main Menu The Main Menu Menus Options CAM ID OFF/001~254 IRIS ALC/ELC/MANUAL… 17 Color Zoom Camera· User Manual BLC/WDR BLC… SHUTTER The SHUTTER value can be set to AUTO, AUTOx2, AUTOx4, AUTOx6, AUTOx8, AUTOx12, AUTOx16, AUTOx24, AUTOx32, AUTOx48, AUTOx64, AUTOx96, AUTOx128, AUTOx256, 1/50, 1/120, 1/250, 1/500, 1/1K, 1/2K, 1/4K, 1/10K or the value is not adjustable. AGC The AGC value can be set to LOW, HIGH, OFF or the value is not adjustable. The MOVE value can be set to NORM, FAST, FASTER, SLOWER, SLOW when the SHUTTER value is the slow shutter value. WB ATW1/ATW2/ MANUAL…/ATC FOCUS AF. . ./ MANUAL/ONE AF 8.D/N AUTO. . ./ NIGHT/ DAY/TRIG VIDEO SET Press Menu button to enter VIDEO SET submenu. DNR/MIRROR/EXPOSURE/DEFINITION/DONTRAST/CHROM A/POSNEG/EIS/SUPPRESS/RET SPECIAL Press Menu button to enter SPECIAL submenu. The submenu items are shown in Table 3.2.2. EXIT QUIT/SAVE/DEFAULT Table 3-2 SPEC IAL Submenu The SPECIAL Submenu 18 Color Zoom Camera· User Manual Menus Options GAMMA 0.45/1 MASK ON. . ./OFF MD Motion Detection: ON. . ./OFF ZOOMRATE 1/2/3/4/5 EZOOM OFF/x2/x4/x6/x8/x10/x12/x14/x16 ZOOMDISP ON/OFF ZCFMOD MODE1/MODE2 RS-485 PROTOCOL/BAUDRATE/ADDRESS PRESET PRESETND/ZOOM SET RET Return 3.2.2 CAM ID Setting (Camera ID) Steps: 1. Move the cursor to CAM ID, press the left/right buttons to select one number or disable this function. 2. Move the cursor to EXIT, press the left/right buttons to select SAVE, press the menu button to save the setting and exit. 3. If you set a CAM ID, you can find the ID number is displayed on the top right corner of the screen. 19 Color Zoom Camera· User Manual 3.2.3 IRIS Setting The iris mode can be set to Manual. . . , ALC (auto) and ELC (Electronic). Manual. . . mode: Purpose: You can adjust the Iris manually to adjust the brightness level of the camera. Steps: 1. Select Manual. . . mode, press the menu button to enter the submenu as shown in Figure 3-3. 2. In the submenu ,you can increase the LEVEL value to brighten the scene. Decrease the LEVEL to darken the scene. The range is from 0 to 63. 3. Move the cursor to RET to return to the previous menu. 4. If you want to save the settings, move the cursor to EXIT, press the left/right buttons to choose SAVE, press the menu button to save the settings. ALC mode: If you choose ALC mode, the camera adjust the Iris automatically in response to changing light conditions. ELC mode: The Iris is turned to wide open in the ELC mode. 20 Color Zoom Camera· User Manual MANUAL IRIS LEVEL - - -| - - - - 29 RET Figure 3-3 Manual Iris 3.2.4 BLC/WDR Setting (Back Light Compensation/Wide Dynamic Range) BLC (Back Light Compensation) Purpose: When there is a bright backlight and the subjects before the backlight is too dark, you can enable the BLC (Back Light Compensation) function. In the BLC. . . submenu, select one area where the dark object is in this area. The camera will properly expose the object in the area. But the backlight out of this area will be over exposed. Steps: 1. Press the up/down buttons to position the cursor on BLC/WDR, press the menu button to enter the BLC. . . submenu. 2. Move the cursor to TYPE, the BLC type can be set to OFF, RIGHT, LEFT, DOWN, UP, CENTER. 3. Press the up/down buttons to position the cursor on RET to return to the previous menu. 21 Color Zoom Camera· User Manual 4. If you want to save the settings, move the cursor to EXIT, press the left/right buttons to choose SAVE, press the menu button to save the settings. BLC TYPE OFF/RIGHT/LEFT/DOWN/UP/CENTER RET Figure 3-4 BLC WDR (Wide Dynamic Range) Note: Only the models w ith "-WD" support Wide Dynamic Range function. The Wide Dynamic Range function combines a long time exposed image and a short time exposed image to get an image for both bright and dark areas to be visible . The image also provides details in both areas. Steps: 1. Press the up/down buttons to position the cursor on BLC/WDR, press the menu button to enter the WDR. . . submenu. 22 Color Zoom Camera· User Manual 2. Move the cursor to LEVEL, press the left/right buttons to adjust the level value. The value is larger, the exposing effect is more obvious. 3. Move the cursor to CONTRAST, press the left/right buttons to adjust the level value. 4. Press the up/down buttons to position the cursor on RET to return to the previous menu. 5. If you want to save the settings, move the cursor to EXIT, press the left/right buttons to choose SAVE, press the menu button to save the settings. WDR LEVEL - - -| - - - - 07 CONTRAST - - -| - - - - 07 RET Figure 3-5 Wide Dynamic Range 3.2.5 SHUTTER Setting The shutter value is the speed of the electronic shutter. The duration for exposure is determined by shutter value. The SHUTTER value can affect the brightness of the image. When the IRIS value is ALC or MANUAL…, the SHUTTER value can be set to AUTO, AUTOx2, AUTOx4, AUTOx6, AUTOx8, AUTOx12, AUTOx16, AUTOx24, AUTOx32, AUTOx48, AUTOx64, 23 Color Zoom Camera· User Manual AUTOx96, AUTOx128, AUTOx256, 1/50, 1/120, 1/250, 1/500, 1/1K, 1/2K, 1/4K, 1/10K. AUTO, AUTOx2, AUTOx4, AUTOx6, AUTOx8, AUTOx12, AUTOx16, AUTOx24, AUTOx32, AUTOx48, AUTOx64, AUTOx96, AUTOx128, AUTOx256 values are called slow shutter values. When the IRIS value is ELC, the SHUTTER value is not adjustable. Steps: 1. Press the up/down buttons to move the cursor to SHUTTER, press the left/right buttons to select one shutter value you need. 2. Move the cursor to EXIT, press left/right buttons to choose SAVE, press the menu button to save the settings. 3.2.6 AGC Setting (Auto Gain Control) In low-light conditions, the camera balances the AGC value and the SHUTTER value to enhance the brightness of the image. When the IRIS value is ALC or MANUAL… and the SHUTTER value is slow shutter value, the AGC menu will switch to MOVE menu. The MOVE menu can be set to NORM, FAST, FASTER, SLOWER, SLOW. When the SHUTTER value is slow shutter value, you can set the MOVE values according to the speed of the moving objects in the scene. This can reduce the streaking of the fast moving objects . If the speed of the moving objects is low, you can choose SLOWER and SLOW. 24 Color Zoom Camera· User Manual If the speed of the moving objects is normal, you can choose NORM. If the speed of the moving objects is high, you can choose FAST and FASTER. When the IRIS value is ALC and the SHUTTER value is 1/50, 1/120, 1/250, 1/500, 1/1K, 1/2K, 1/4K, 1/10K, the AGC value is not adjustable. When the IRIS value is MANUAL… and the SHUTTER value is 1/50, 1/120, 1/250, 1/500, 1/1K, 1/2K, 1/4K, 1/10K, the AGC value can be set to LOW, HIGH, OFF. When the IRIS value is ELC, the AGC value can be set to LOW, HIGH, OFF. 3.2.7 WB Setting (White Balance) This feature processes the viewed image to retain co lor balance over a color temperature range and remove the unrealistic color casts. The WB mode can be set to ATW1, ATW2, ATC, and Manual. . . . ATW1: The Auto Tracking White Balance. In the ATW mode, white balance is continuously being adjusted in real-time according to the color temperature of the scene illumination. The color temperature range of the ATW1 mode is from 1800K to 10500K. ATW2: The Auto Tracking White Balance. In the ATW mode, white balance is continuously being adjusted in real-time according to the color temperature of the scene illumination. 25 Color Zoom Camera· User Manual The color temperature range of the ATW2 mode is from 1800K to 15000K. ATC: Select ATC mode, the camera retains color balance automatically according to the current color temperature. If the lighting environment is changed, you have to readjust the settings accordingly. Manual. . . : You can adjust the color temperature manually to meet your own demand. Steps: 1. Select Manual. . . and press the menu button to enter the submenu. 2. Move the cursor to SET, press the left/right buttons to select a SET value. SET can be set to 3200K, 6300K and USER. 3200K is an estimated value for indoor application. And the RED and BLUE values are not adjustable. 6300K is an estimated value for outdoor application. And the RED and BLUE values are not adjustable. When you select USER, you can adjust the RED and BLUE values to meet your demand. MWB SET USER RED 032 BLUE 016 26 Color Zoom Camera· User Manual Figure 3-6 Manual White Balance 3.2.8 FOCUS Setting The FOCUS mode can be set to AF. . . , MANUAL and ONE AF. AF. . .: This is the auto focus setting. If you choose the AF… mode, the lens keeps in focus during the zoom-in and zoom-out functions. Steps: 1. Move the cursor to FOCUS, press the left/right buttons to choose AF… . 2. Select the MODE, SENSE and NEAR LIM values of the auto focus. The available values are shown in the Figure 3-7. MODE: The auto focus mode can be set to NORM and INTERVAL. The lens focuses continuously when you select the NORM mode. The lens focuses at intervals when you select the NORM mode. SENSE: The sensitivity of autofocus function can be set to MID, LOW, HIGH. NEAR LIM: You can set the nearest focus distance to 1M, 1.5M, 3M, 6M, 10CM, 30CM and INF(infinite). 27 Color Zoom Camera· User Manual AF MODE NORM/INTERVAL SENSE MID/LOW/HIGH NEAR LIM1M, 1.5M, 3M, 6M,10CM,30CM,INF RET Figure 3-7 Focus Mode Settings ONE AF: If you choose ONE AF mode, the lens w ill be focused automatically once. You have to manually adjust the focus, when the scene changes. MANUAL: If you choose MANUAL mode, to focus, you can press the FOCUS NEAR and FOCUS FAR buttons on the rear plate of the camera. 3.2.9 D/N Setting (Day/Night) The DAY/NIGHT mode can be set to TRIG, AUTO…, DAY and NIGHT. TRIG mode, the day and night mode is switched by triggering the 4-IN interface on the rear plate of the camera. DAY mode is used for normal lighting conditions. The camera delivers color image. 28 Color Zoom Camera· User Manual NIGHT mode can increase the sensitivity in low light conditions. The camera delivers black and white image. AUTO mode, the day mode and the night mode can switch automatically. Steps: 3. After moving the cursor to D/N, choose the AUTO… mode. 4. Press the menu button to enter the submenu. LEVEL: The day/night mode switches when the light condition reaches to the value you select. The value ranges from 0 to 7. DAYNIGHT: The value can be set to 2s, 3s, 5s, 10s, 15s, 20s, 25s and 30s. This value is the delay time before the day mode switches to the night mode. NIGHTDAY: The value can be set to 2s, 3s, 5s, 10s, 15s, 20s, 25s and 30s. This value is the delay time before the night mode switches to the day mode. AUTO D/N LEVEL - - -| - - - - - 07 D->N 5S N->D 10S RET Figure 3-8 Auto D/N 29 Color Zoom Camera· User Manual 3.2.10 VIDEO Parameters Setting Steps: 1. Move the cursor to the VIDEO SET… . 2. Press menu button to enter the submenu as shown in Figure 3-9 3. In the submenu, the adjustable features are DNR, MIRROR, EXPOSURE, DEFINITION, CONTRAST, CHROMA, POS/NEG, EIS and SUPPRESS. VIDEO SET DNR 1 MIRROR OFF EXPOSURE - - -| - - - - - 07 DEFINITION - - -| - - - - - 07 CONTRAST - -| - - 02 CHROMA - -| - - 03 POS/NEG + EIS OFF SUPPRESS 2 RET Figure 3-9 VIDEO SET Parameters DNR 30 Color Zoom Camera· User Manual DNR (Digital No ise Reduction) function can reduce the noise in the image. The reduce value can be set to 1, 2, 3, 4, 5 and OFF. MIRROR If you turn the MIRROR function on, the image will be flipped. It is like the image in the mirror. The flip direction can be set to OFF, HORIZONTAL, CENTRAL and VERTICAL . EXPOSURE This function can enhance the brightness of the image. The value ranges from 0 to 15. DEFINITION DEFINITION describes the clarity of detail in the image. The value ranges from 0 to 15. CONTRAST This feature enhances the difference in color and light between parts of an image. The value ranges from 0 to 7. CHROMA Adjust this feature to change the depth of the color. The value ranges from 0 to 7. POS/NEG The default setting of the POS/NEG is +. It means the image is positive. If you select -, you can see the image turn to positive. EIS Turning the EIS (Electronic Image Stabilization) function on may reduce the image vibration caused by external environment. SUPPRESS 31 Color Zoom Camera· User Manual You can take advantage of this function to reduce the color under the night mode. The value ranges from 0 to 3. 3.2.11 SPECIAL Functions Setting Steps: 1. Move the cursor to the SPECIAL. 2. Press menu button to enter the submenu as shown in Figure 3-10. 3. In the submenu, the adjustable features are MASK, MD, ZOOMRATE, EZOOM, ZOOMDISP, ZCFMOD, RS-485 and PRESET. SPEC IAL VIDEO … ZOOMRATE 1/ 2/ 3/ 4/5 EZOOM OFF,x2,x4,x6,x8,x10, x12,x14,x16 ZOOMDISP ON/OFF ZCFMOD MODE1/MODE2 RS485 … PRESET … BLEMISH DETECT RET Figure 3-10 SPEC IAL Settings 32 Color Zoom Camera· User Manual MASK (Privacy Mask) Steps: 1. Move the cursor to MASK, press the left/right buttons to select ON… . 2. Press the menu button to enter the submenu. 3. Move the cursor to MASK NO. to choose a mask number. There are up to 8 privacy masks you can configure. 4. Move the cursor to ON/OFF and select ON to enable the privacy mask function. 5. Move the cursor to MASK SET. 1). Press the menu button to select LOC. 2). Press the up/down/left/right buttons to set the position of the privacy mask on the screen. 3). Press the menu button to select SIZE. 4). Press the up/down/left/right buttons to set the size of the privacy mask. 5). Press the menu button to select OK to finish setting the position and size of the privacy mask. 6. Move the cursor to COLOR, press the left/right buttons to select the color you want. There are 14 colors available. 7. If you want mosaic privacy masks, move the cursor to MOSAIC and enable this function. 8. Move the cursor to RET, press the menu button to return to the previous menu. 33 Color Zoom Camera· User Manual 9. In the main menu, move the cursor to EXIT, press the left/right buttons to select SAVE, DEL or QUIT 10. Press the menu button to exit the menu. MASK MASK NO. - - -| - - - - - 03 ON/OFF OFF/ON MASK SET OK/LOC/SIZE COLOR - - -| - - - - - 03 MOSAIC ON/OFF RET Figure 3-11 Motion Detection MD (Motion Detection) Steps: 1. Move the cursor to MD, press the left/right buttons to select ON… . 2. Press the menu button to enter the submenu. 3. Move the cursor to TYPE, select the type you want. There are 2 types. Type 1 is a frame with the adjustable position and the size. Type 2 is the full screen panes. Type1 settings: 1). Move the cursor to AREA. 34 Color Zoom Camera· User Manual 2). Press the menu button to select LOC. 3). Press the up/down/left/right buttons to set the position of the motion detection area on the screen. 4). Press the menu button to select SIZE. 5). Press the up/down/left/right buttons to set the size of the area. 6). Press the menu button to select OK to finish setting the position and size of the area. 7). Move the cursor to SENSE. You can select LOW, MID, HIGH to set the sensitivity level of the motion detection. Type2 settings: 1). Move the cursor to SENSE. You can select LOW, MID, HIGH to set the sensitivity level of the motion detectio n. 2). Move the cursor to RET, press the menu button to return to the previous menu. 3). In the main menu, move the cursor to EXIT, press the left/right buttons to select SAVE, DEL or QUIT 4). Press the menu button to exit the menu. MOTION DET TYPE 1/2 AREA OK/LOC/SIZE SENSE HIGH/MID/LOW RET 35 Color Zoom Camera· User Manual Figure 3-12 Motion Detection ZOOMRATE You can adjust this feature to change the speed of zoom. The value ranges from 1 to 5. The value is larger, the speed is higher. EZOOM The EZOOM can be set to OFF, x2, x4, x6, x8, x10, x12, x14 and x16. The maximum optical zoom is 23X. 2 times 23X is 46X. If you choose x2, the maximum digital zoom can reach to 46X. The camera zooms electronically after reaching to the value 23x. ZOOMDISP There are two ZOOMDISP modes: ON: The zoom value will be displayed on the top right of the screen when you press the T/W buttons. OFF: The zoom value will not be displayed on the top right of the screen when you press the T/W buttons. ZCFMOD The ZCFMOD can be set to MODE1 and MODE2. When you select the MODE1, the zoom in voltage is from +3V to +12V. The zoom out voltage is from -3V to -12V. When you select the MODE2, the zoom in voltage is from -3V to -12V. The zoom out voltage is from +3V to +12V. The voltage of the focus near and far is the same as the zoom in and out in these two modes. RS-485 36 Color Zoom Camera· User Manual Before you use the RS-485 interface to send control signal to the camera, you have to configure the RS-485 parameters first. PROTOCOL: The control protocol is PELCO-D. It is not adjustable. BAUDRATE: The baudrate can be set to 1200, 2400, 4800, 9600, 19200 and 38400. ADDRESS: Choose a number as the address of the camera. It is for the control device to distinguish the different cameras when there are multiple cameras to control. RS485 PROTOCOL PELCO-D BAUDRATE 2400 ADDRESS 001 RET Figure 3-13 RS-485 Settings PRESET There are up to 254 presets that can be configured. Steps: 1. Move the cursor to PRESET and press the menu button to enter the submenu 2. Move the cursor to PRESET NO and select one preset number. 3. Move the cursor to ZOOM SET, press the menu button to turn the ◇ symbol to ◆. 37 Color Zoom Camera· User Manual 4. Press the up/down buttons to zoom in and zoom out. 5. press the menu button to turn the ◆ symbol to ◇. 6. Move the cursor to EXIT, press the left/right buttons to select SAVE, DEL or QUIT. 7. Press the menu button to exit the menu. PRESET SET PRESET NO 000 ZOOM SET ◆ EXIT QUIT Figure 3-14 Preset Programming 3.2.12 EXIT Purpose: EXIT option is used for returning default, saving or canceling the settings. Steps: 1. Move the cursor to EXIT, press the left/right buttons to choose an option. SAVE: When you select SAVE, all the modifications will be saved before exit the menu. 38 Color Zoom Camera· User Manual DEFAULT: When you select DEFAULT, all the settings will be initialized to factory settings before exit the menu. QUIT: When you select QUIT, all the modifications will be canceled before exit the menu. 2. Press the menu button to confirm your selection. 39 Color Zoom Camera· User Manual Appendix Table 1 DS-2CZ2132P(N) Specification DS-2CZ2132P(N) Model Parameter 22X CCD Day&Night Zoom Camera Camera Image Sensor 1/4" SONY Interline Transfer Super HAD-II CCD Signal System Effective Pixels Min. Illumination Shutter Time PAL/NTSC PAL: 752(H)x582(V) NTSC: 768(H)x494(V) 0.2Lux @ (F1.6,AGC ON), 0.0008Lux @ (F1.6,AGC ON, sensitivity × 256) PAL: 1/50 to 1/10,000s NTSC: 1/60 to 1/10,000s Day & Night Electronic Horizontal Resolution Synchronization Video Output 540TVL Internal synchronization 1Vp-p Composite Output (75Ω/BNC) S/N Ratio More than 50dB Lens 40 Color Zoom Camera· User Manual Focal Length 3.9-85.8mm,22X Zoom Speed Approx 3s (Optical Wide-Tele) Angle of View 49.6° -2.40°(Wide-Tele) Min. Working Distance 10-1500mm(Wide-Tele) Aperture Range F1.6-F3.7 Menu Camera ID Off/On (0-254) Iris Mode ALC / Manual / ELC Auto Gain Low/High/Off Auto White Balance ATW1 / ATW2 / ATC / Manual Focus Mode Day/Night AF/ONE AF/Manual Auto/Day/Night/TRIG Slow Shutter Max. X256 Privacy Mask Off/On, up to 14 zones Motion Detection Off/Mode1/Mode2 Digital Zoom, 3D Digital Noise Reduction, Video POS/NEG ,Mirror, Resolution, Electronic image stabilization, Back Light Compensation 41 Color Zoom Camera· User Manual Zoom speed 1-5 Optical Zoom OFF, x2, x4, x6, x8, x10, x12, x14, x16 Zoom Display ON/OFF ZCF RS-485 Model1/Model2 Address/Protocol/Baud Rate Preset 0 - 254 General Operating Conditions -10°C - 60°C (14° F - 140° F) Humidity 90% or less(non-condensing) Power Supply 12 V DC ± 10% Power Consumption Dimension Max. 4W 64 x 69 x 120 mm (2.53” x 2.42” x 4.46”) Weight 450 g (0.99lbs) 42 Color Zoom Camera· User Manual Table 2 DS-2CZ2152P(N) Specification DS-2CZ2152P(N) Parameter Model 23X CCD Day&Night Zoom Camera Camera Image Sensor 1/4" SONY Interline Transfer Super HAD-II CCD Signal System Effective Pixels PAL/NTSC PAL: 752(H)x582(V) NTSC: 768(H)x494(V) Color: 0.2Lux @ (F1.6,AGC ON), 0.0008Lux @ Min. Illumination (F1.6,AGC ON, sensitivity × 256) B / W: 0.02Lux @ (F1.6,AGC ON), 0.00008Lux @ (F1.6,AGC ON, sensitivity × 256) Shutter Time Day & Night PAL: 1/50 to 1/10,000s NTSC: 1/60 to 1/10,000s IR cut filter with auto switch Color: 540 TVL Horizontal Resolution Synchronization Video Output B / W: 600TVL Internal synchronization 1Vp-p Composite Output (75Ω/BNC) 43 Color Zoom Camera· User Manual S/N Ratio More than 50dB Lens Focal Length 3.84-88.4mm,23X Zoom Speed Approx 3s (Optical Wide-Tele) Angle of View 50.2-2.36°(Wide-Tele) Min. Working Distance 10-1500mm(Wide-Tele) Aperture Range F1.6-F4.5 Menu Camera ID Off/On (0-254) Iris Mode ALC / Manual / ELC Auto Gain Low/High/Off Auto White Balance ATW1 / ATW2 / ATC / Manual Focus Mode Day/Night AF/ONE AF/Manual Auto/Day/Night/TRIG Slow Shutter Max. X256 Privacy Mask Off/On, up to 14 zones Motion Detection Video Off/Mode1/Mode2 Digital Zoom, 3D Digital Noise Reduction, POS/NEG ,Mirror, Resolution, Electronic image 44 Color Zoom Camera· User Manual stabilization, Back Light Compensation Zoom speed 1-5 Optical Zoom OFF, x2, x4, x6, x8, x10, x12, x14, x16 Zoom Display ON/OFF ZCF RS-485 Model1/Model2 Address/Protocol/Baud Rate Preset 0 - 254 General Operating Conditions -10°C - 60°C (14° F - 140° F) Humidity 90% or less(non-condensing) Power Supply 12 V DC ± 10% Power Consumption Dimension Max. 4.5 W 66 x 76 x 128 mm (2.6” x 3.0” x 5.0”) Weight 550 g (1.21lbs) 45 Color Zoom Camera· User Manual Table 3 DS-2CZ2152P-IRA Specification DS-2CZ2152P-IRA Parameter Model 23X CCD Day&Night Zoom Camera Camera Image Sensor 1/4" SONY Interline Transfer Super HAD-II CCD Signal System PAL Effective Pixels 752(H)x582(V) Color: 0.2Lux @ (F1.6,AGC ON), 0.0008Lux @ Min. Illumination (F1.6,AGC ON, sensitivity × 256) B / W: 0.02Lux @ (F1.6,AGC ON), 0.00008Lux @ (F1.6,AGC ON, sensitivity × 256) Shutter Time 1/50 to 1/10,000s Day & Night IR cut filter with auto switch Color: 540 TVL Horizontal Resolution Synchronization Video Output B / W: 600TVL Internal synchronization 1Vp-p Composite Output (75Ω/BNC) S/N Ratio More than 50dB Lens Focal Length 3.84-88.4mm,23X 46 Color Zoom Camera· User Manual Zoom Speed Angle of View Min. Working Distance Approx 3s (Optical Wide-Tele) 50.2-2.36°(Wide-Tele) 10-1500mm(Wide-Tele) Aperture Range F1.6-F4.5 Menu Camera ID Off/On (0-254) Iris Mode ALC / Manual / ELC Auto Gain Low/High/Off Auto White Balance ATW1 / ATW2 / ATC / Manual Focus Mode Day/Night AF/ONE AF/Manual Auto/Day/Night/TRIG Slow Shutter Max. X256 Privacy Mask Off/On, up to 14 zones Motion Detection Off/Mode1/Mode2 Digital Zoom, 3D Digital Noise Reduction, Video POS/NEG ,Mirror, Resolution, Electronic image stabilization, Back Light Compensation Zoom speed 1-5 Optical Zoom OFF, x2, x4, x6, x8, x10, x12, x14, x16 47 Color Zoom Camera· User Manual Zoom Display ON/OFF ZCF RS-485 Model1/Model2 Address/Protocol/Baud Rate Preset 0 - 254 General Operating Conditions -10°C - 60°C (14° F - 140° F) Humidity 90% or less(non-condensing) Power Supply 12 V DC ± 10% Power Consumption Max. 15 W Weather Proof Rating IP66 IR Range Dimension Approx 100 meters 117 x 97 x 255 mm (4.6” x 3.8” x 10.0”) 2.5 kg (5.51lbs) Weight 48 Color Zoom Camera· User Manual Table 4 DS-2CZ2182P(N) Specification Model Parameter DS-2CZ2182P(N) 30X CCD ICR Zoom Camera Camera Image Sensor 1/4" SONY Interline Transfer Super HAD-II CCD Signal System PAL/NTSC Effective Pixels PAL: 752 (H) × 582 (V) NTSC: 768 (H) × 494 (V) Color: 0.2Lux @ (F1.6, AGC ON), 0.0008 Lux @ Min. Illumination (F1.6, AGC ON, sensitivity × 256) B/W: 0.02 Lux @ (F1.6, AGC ON), 0.00008 Lux @ (F1.6, AGC ON, sensitivity × 256) Shutter Time Day & Night Horizontal Resolution Synchronization Video Output S/N Ratio PAL: 1/50 to 1/10,000 s NTSC: 1/60 to 1/10,000 s IR cut filter auto switch 540TVL (Color), 600TVL (B/W) Internal synchronization 1 Vp-p composite output (75Ω/BNC) More than 50dB 49 Color Zoom Camera· User Manual Lens Focal Length 3.4-102 mm, 30X Zoom Speed Approx. 5 s (Optical, Wide-tele) Angle of View 55.8 - 2.0 °(Wide-tele) Min. Working Distance 10 - 1500mm (Wide-tele) Aperture Range F1.4 – F3.7 Menu Camera ID Off/On (0 - 254) Iris Mode Auto/Manual/Electronic Auto Gain Off/Low/High Auto White Balance Focus Mode Day/Night ATW1/ATW2 /ATC/Manual AF/ONE AF/Manual Auto/Day/Night/TRIG Slow Shutter Max. X256 Privacy Mask Off/On, up to 14 zones Motion Detection Video Off/Mode 1/Mode 2 3D-DNR,Mirror,Definition,Flickerless,Exposure-Com pensation,BLC,Electronic image stabilization 50 Color Zoom Camera· User Manual Zoom speed Level 1-5 adjustable Digital Zoom Off, ×2, ×4, ×6, ×8, ×10, ×12, ×14, ×16 Zoom Display On/Off ZCF Control Mode RS-485 Mode 1/Mode 2 Protocol/Baud Rate/Address Preset 0 - 254 General Operating -10°C - 60°C (14° F - 140° F) Conditions Humidity 90% or less(non-condensing) Power Supply 12 VDC ± 10% Power Max. 4.5 W Consumption Dimension Weight 66 × 76 × 128 mm (2.6” x 3.0” x 5.0”) 550 g (1.21lbs) 51 Color Zoom Camera· User Manual Table 5 DS-2CZ2192P(N) Specification Model Parameter DS-2CZ2192P(N) 36X CCD ICR Zoom Camera Camera Image Sensor 1/4" SONY Interline Transfer Super HAD-II CCD Signal System Effective Pixels PAL/NTSC PAL: 752 (H) × 582 (V) NTSC: 768 (H) × 494 (V) Color: 0.2Lux @ (F1.6, AGC ON), 0.0008 Lux @ Min. Illumination (F1.6, AGC ON, sensitivity × 256) B/W: 0.02 Lux @ (F1.6, AGC ON), 0.00008 Lux @ (F1.6, AGC ON, sensitivity × 256) Shutter Time Day & Night Horizontal Resolution Synchronization Video Output PAL: 1/50 to 1/10,000 s NTSC: 1/60 to 1/10,000 s IR cut filter auto switch 540TVL (Color), 600TVL (B/W) Internal synchronization 1 Vp-p composite output (75Ω/BNC) S/N Ratio More than 52dB Lens 52 Color Zoom Camera· User Manual Focal Length 3.3 - 119 mm, 36X Zoom Speed Approx. 6 s (Optical, Wide-tele) Angle of View 57.1 - 1.7 °(Wide-tele) Min. Working Distance 10 - 1500mm (Wide-tele) Aperture Range F1.4 - F4.2 Menu Camera ID Off/On (0 - 254) Iris Mode Auto/Manual/Electronic Auto Gain Off/Low/High Auto White Balance Focus Mode Day/Night ATW1/ATW2 /ATC/Manual AF/ONE AF/Manual Auto/Day/Night/TRIG Slow Shutter Max. X256 Privacy Mask Off/On, up to 14 zones Motion Detection Video Zoom speed Off/Mode 1/Mode 2 3D-DNR,Mirror,Definition,Flickerless,Exposure-Compen sation,BLC,Electronic image stabilization Level 1-5 adjustable 53 Color Zoom Camera· User Manual Digital Zoom Off, ×2, ×4, ×6, ×8, ×10, ×12, ×14, ×16 Zoom Display On/Off ZCF Control Mode RS-485 Mode 1/Mode 2 Protocol/Baud Rate/Address Preset 0 - 254 General Operating -10°C - 60°C (14° F - 140° F) Conditions Humidity 90% or less(non-condensing) Power Supply 12 VDC ± 10% Power Max. 4.5 W Consumption Dimension Weight 66 × 76 × 128 mm (2.6” x 3.0” x 5.0”) 450 g (0.99lbs) 54 Color Zoom Camera· User Manual Table 6 DS-2CZ2182P-WD Specification Model Parameter DS-2CZ2182P-WD 30X CCD ICR Zoom Camera Camera Image Sensor 1/4" SONY Interline Transfer Super HAD-II CCD Signal System PAL Effective Pixels 752 (H) × 582 (V) Color: 0.2Lux @ (F1.6, AGC ON), 0.0008 Lux @ Min. Illumination (F1.6, AGC ON, sensitivity × 256) B/W: 0.02 Lux @ (F1.6, AGC ON), 0.00008 Lux @ (F1.6, AGC ON, sensitivity × 256) Shutter Time 1/50 to 1/10,000 s Day & Night IR cut filter auto switch Horizontal Resolution Synchronization Video Output 540TVL (Color), 600TVL (B/W) Internal synchronization 1 Vp-p composite output (75Ω/BNC) S/N Ratio More than 50dB Lens Focal Length 3.5-105.5 mm, 30X Zoom Speed Approx. 5 s (Optical, Wide-tele) 55 Color Zoom Camera· User Manual Angle of View Min. Working Distance 56.4 - 2.0 °(Wide-tele) 10 - 1500mm (Wide-tele) Aperture Range F1.4 – F3.7 Menu Camera ID Off/On (0 - 254) Iris Mode Auto/Manual/Electronic Auto Gain Off/Low/High Auto White Balance Focus Mode Day/Night ATW1/ATW2 /ATC/Manual AF/ONE AF/Manual Auto/Day/Night/TRIG Slow Shutter Max. X256 Privacy Mask Off/On, up to 14 zones Motion Detection Video Off/Mode 1/Mode 2 3D-DNR,Mirror,Definition,Flickerless,Exposure-Compen sation,BLC,Electronic image stabilization, WDR Zoom speed Level 1-5 adjustable Digital Zoom Off, ×2, ×4, ×6, ×8, ×10, ×12, ×14, ×16 Zoom Display On/Off 56 Color Zoom Camera· User Manual ZCF Control Mode RS-485 Mode 1/Mode 2 Protocol/Baud Rate/Address Preset 0 - 254 General Operating -10°C - 60°C (14° F - 140° F) Conditions Humidity 90% or less(non-condensing) Power Supply 12 VDC ± 10% Power Max. 4.5 W Consumption Dimension Weight 66 × 76 × 128 mm (2.6” x 3.0” x 5.0”) 550 g (1.21lbs) 57 Color Zoom Camera· User Manual Table 7 DS-2CZ2192P-WD Specification DS-2CZ2192P-WD Model Parameter 36X CCD ICR Zoom Camera Camera Image Sensor 1/4" SONY vertical double density interline CCD Signal System PAL Effective Pixels 752 (H) × 582 (V) Color: 0.2Lux @ (F1.6, AGC ON), 0.0008 Lux @ Min. Illumination (F1.6, AGC ON, sensitivity × 256) B/W: 0.02 Lux @ (F1.6, AGC ON), 0.00008 Lux @ (F1.6, AGC ON, sensitivity × 256) Shutter Time Day & Night Horizontal Resolution Synchronization Video Output 1/50 to 1/10,000 s IR cut filter auto switch 540TVL (Color), 600TVL (B/W) Internal synchronization 1 Vp-p composite output (75Ω/BNC) S/N Ratio More than 50dB Lens Focal Length 3.3 - 119 mm, 36X 58 Color Zoom Camera· User Manual Zoom Speed Angle of View Min. Working Distance Approx. 6 s (Optical, Wide-tele) 57.1 - 1.7 °(Wide-tele) 10 - 1500mm (Wide-tele) Aperture Range F1.6 - F4.5 Menu Camera ID Off/On (0 - 254) Iris Mode Auto/Manual/Electronic Auto Gain Off/Low/High Auto White Balance ATW1/ATW2 /ATC/Manual Focus Mode Day/Night AF/ONE AF/Manual Auto/Day/Night/TRIG Slow Shutter Max. X256 Privacy Mask Off/On, up to 14 zones Motion Detection Off/Mode 1/Mode 2 3D-DNR,Mirror,Definition,Flickerless,Exposure Video -Compensation,BLC,Electronic image stabilization, WDR Zoom speed Level 1-5 adjustable Digital Zoom Off, ×2, ×4, ×6, ×8, ×10, ×12, ×14, ×16 Zoom Display On/Off 59 Color Zoom Camera· User Manual ZCF Control Mode RS-485 Mode 1/Mode 2 Protocol/Baud Rate/Address Preset 0 - 254 Defect Pixel Correction Yes General Operating Conditions -10°C - 60°C (14° F - 140° F) Humidity 90% or less(non-condensing) Power Supply 12 VDC ± 10% Power Consumption Dimension Max. 5 W 66 × 76 × 128 mm (2.6” x 3.0” x 5.0”) Weight 450 g (0.99lbs) 60 Color Zoom Camera· User Manual Table 8 DS-2CZ2114P(N) Specification DS-2CZ2114P(N) Model Parameter 18X CCD ICR Zoom Camera Camera Image Sensor 1/3" SONY Interline Transfer EXview HAD-II CCD Signal System PAL/NTSC Effective Pixels PAL: 976 (H) × 582 (V) NTSC: 976 (H) × 494 (V) Color: 0.1Lux @ (F1.6, AGC ON), 0.0008 Lux @ Min. Illumination (F1.6, AGC ON, sensitivity × 256) B/W: 0.01 Lux @ (F1.6, AGC ON), 0.00008 Lux @ (F1.6, AGC ON, sensitivity × 256) Shutter Time Day & Night Horizontal Resolution Synchronization Video Output PAL: 1/50 to 1/10,000 s NTSC: 1/60 to 1/10,000 s IR cut filter auto switch 650TVL (Color), 700TVL (B/W) Internal synchronization 1 Vp-p composite output (75Ω/BNC) S/N Ratio More than 50dB 61 Color Zoom Camera· User Manual Lens Focal Length 4.55 – 81.9 mm, 18x Zoom Speed Approx. 4 s (Optical, Wide-tele) Angle of View 55.62 – 3.35 °(Wide-tele) Min. Working Distance 10 - 1500mm (Wide-tele) Aperture Range F1.6 – F2.7 Menu Camera ID Iris Mode Off/On (0 - 254) Auto/Manual/Electronic Auto Gain Auto White Balance Off/Low/High ATW1/ATW2 /ATC/Manual Focus Mode Day/Night AF/One AF/Manual Auto/Day/Night/TRIG Slow Shutter Max. X256 Privacy Mask Off/On, up to 14 zones Motion Detect Off/Mode 1/Mode 2 Video Zoom speed 3D-DNR,Mirror,Definition,Flickerless,Exposure-Co mpensation,BLC,Electronic image stabilization Level 1-5 adjustable 62 Color Zoom Camera· User Manual Digital Zoom Off, ×2, ×4, ×6, ×8, ×10, ×12, ×14, ×16 Zoom Display On/Off ZCF Control Mode RS-485 Mode 1/Mode 2 Protocol/Baud Rate/Address Preset 0 - 254 Defect Pixel Yes Correction General Operating Conditions -10 ° C - 60 °C (14 ° F - 140 ° F) Humidity 90% or less (non-condensing) Power Supply 12 V DC ± 10% Power Consumption Dimension Max. 5W 66 × 76 × 128 mm (2.6” x 3.0” x 5.0”) Weight 450 g (0.99lbs) 63