Download Cordage, Rigging & Sailboat Hardware
Transcript
Cordage, Rigging & Sailboat Hardware Accessory Cord ................... 591 Backstay Adjusters ............. 600 Blocks ............................ 566-572 Deck Organizers .................. 571 Float Line.............................. 590 Genoa Cars .................. 573, 575 Mainsheet Systems ............. 574 Rope............................... 589-591 Rope Clutch ......................... 577 Sail Repair Tape ................... 596 Shackles ................ 570, 579-582 Snaps ............................. 582-585 Spinnaker Poles........... 593, 594 Splicing Tools .............. 549, 586 Tiller Extensions .................. 592 Track ............................. 573, 576 Turnbuckles ................. 598, 602 Twine..................................... 591 Whisker Poles ...................... 593 Winch Handles ..................... 564 Winches ......................... 557-563 Windex .................................. 597 Wire Rope & Tools ............... 601 The World’s largesT ManufacTurer of Marine heads ThE PrEFErrED ChoICE Jabsco marine toilets are superior in design and reliability. In fact, more yachtsman and boatbuilders choose Jabsco manual and electric heads worldwide. The toilets compliment all boat interiors and are built to resist harsh chemicals and the rigors of life at sea. Visit us online at www.ittflowcontrol.com to discover the stylish new Lite Flush Electric toilet or our Deluxe Flush range of luxury marine toilets. Twist n’ lock (Manual) Quiet flush (Electric) A Global Leader in Pump & Valve Solutions www.jabsco.com lite flush (Electric) deluxe flush (Electric) 557 Cordage, Rigging & Sailboat Hardware Winches Winch Selection Guide Efficient sail handling begins with the selection of the correct winch. To help you recommendations. REMEMBER runner winch and mainsheet winch selection select from the winches described in the following pages the chart below is depends on the purchase system fitted, and expected loads. Dynamic sail loads designed as a quick reference to match application, yacht size and winch. Cross can easily increase the loads dramatically. reference your yacht size (for masthead rigs) or sail area (fractional rigs) with Multihulls generally have a higher righting moment than monohulls of equivalent application, to ascertain the correct winch. You can also send your deck and sail lengths, resulting in higher dynamic loading, therefore, winch size needs to be plans to your Lewmar representative, they will be pleased to make individual larger — consult your Lewmar office or rigger for further guidance. Sail area Boat Length Overall m ft Application 6.1–7.6 20–25 7.6–8.8 25–29 8.8–10.1 29–33 10.1–10.7 33–35 10.7–11.3 35–37 11.3–11.9 37–39 11.9–12.5 39–41 12.8–14.6 42–48 14.6–16.8 48–55 16.8–18.9 55–62 18.9–21.6 62–71 Genoa (ft2/m2) 200 19 300 28 350 33 470 44 550 51 600 56 750 70 900 84 1500 139 1900 177 2300 214 Spinnaker (ft2/m2) 300 28 400 37 600 56 800 74 1000 93 1200 111 1400 130 1600 149 3000 279 3800 353 4600 427 Main (ft2/m2) 120 11 150 14 180 17 210 20 230 21 260 24 300 28 350 33 750 70 875 81 1000 93 Winch Selection Guide Application Genoa sheet spinnaker sheet Main sheet Genoa Halyard spinnaker Genoa Halyard Halyard Main Halyard Runners Size 7 15 30 40 45 48 50 55 65 68 6 7 8 15 30 40 45 50 55 65 68 6 7 15 30 40 45 50 55 65 68 6 7 15 30 40 45 50 55 65 68 6 7 8 15 30 40 45 50 55 65 68 6 7 8 15 30 40 45 50 55 65 68 45 50 55 65 68 m ft 6.1 20 7.6 25 8.8 29 10.1 33 10.7 35 11.3 37 11.9 39 12.5 41 14.6 48 16.8 55 18.9 62 21.6 71 24.4 80 25+ 80+ Winches 558 Cordage, Rigging & Sailboat Hardware Winches Winche Winche Lewmar fuses its legendary quality with state of the art technology to offer . Lewmar fuses its legendary quality with state of the artanu technology toualit offer acturin the most advanced winch range ever the E Lewmar believes in evolution not revolution it has been evolving and the most advanced winch range ever the E ince the 1960 s improving winch technology for almost half a century. Lewmar has developed winch solutions for the world s leading boat Lewmar believes in evolution not revolution builders, custom yards and race teams. o other company in the leisure . n the last few years Lewmar avant plant was updated with the most hi tech machinery in the industry. anu actur ur plant is it has capable been ofevolving and of winches every day building hundreds we are n the last few year marine market has the same level of heritage and expertise when it comes able to control quality, finish and variants all on the same to building reliable, high quality, easy to fit and easily serviceable winches. machines. ur quality control procedures and processes are We ve taken Lewmar s 7 ear arrant improving winch technology for almost half a century. ince the 1960 s the most hi tech m tried tested and renowned throughout the industry. Lewmar has developed winch solutions for the world sand leading boat Stead a t uildin loc capable of building builders, custom yards and race teams. o other company in the leisure cean Winch the most popular winch ever made winch is alevel development that marine market has the same of heritage and expertise when it comes We are so confident about the and improved it further. The new E contains years of knowledge and understanding of what boat builders quality of our new E winch to building reliable, high quality, easy to fit and easily serviceable winches. and sailors want. o compromises have been made in terms of quality or integrity of design. You won t find much plastic here, we use high quality Stead a t uildin alloys and metal u to er ocu ed loc range that we are backing this up with a new comprehensive able to control qua machines. tried and tested an 7 year warranty. With Lewmar s global network of distributors, wherever 7 you We ve taken Lewmar s cean Winch the most popular winch ever made ey boat builders briefed us that they wanted Lewmar to retain all the and improved it further. The new E ur qua are in the world, you can be confident that Lewmar will be winch is a development there to support you. that benefits of its simple, no nonsense, easy to service winch with very few parts. t s proven performance and easy conversion to power were all in contains years of knowledge and understanding of what boat builders its favour. and sailors want. o compromises have been made in terms of quality or But we knew we could make installation easier and update the styling. With this in mind we have designed a winch that can either be fitted in the integritymanner, of design. You won t find much conventional or without removing the drum, to speed up plastic here, we use high quality installation. This new easy fit feature uses Lewmar s alloys and metal s stud fixings. ear arra We are so confide quality of our new range that we are b up with a new com 7 year warranty. Cruising ailors confirmed they want a proven quality winch that could be u to er ocu ed serviced by the boat owner without any tools, they wanted to be able to put the winch together themselves, and they also wanted ey boat builders briefed us that they wanted Lewmar to retain all the a reliable and predictable grip. With many winch users only chartering boats for a few days holiday a benefits of its simple, no nonsense, easy to service winch with very few year, safety is key in any new developments. We have included in parts. t s proven performance and easy conversion to power were all in some simple safety features the direction arrow which means all your crew load the line on (feed) the winch correctly that will make sailing its favour. more fun for the entire family. Racing ailors liked the alloy, needle peened finish of But we knew we could make installation easier and update the styling. Lewmar s winches. Their only request was that they d With this in mind we have designed a winch that can either be fitted in the like it in black. The good news is we have it in black, grey and chrome bronze finish. conventional manner, or without removing the drum, to speed up installation. This new easy fit feature uses Lewmar s s stud fixings. Cruising ailors confirmed they want a proven quality winch that could be serviced by the boat owner without any tools, they wanted to be able to put the winch together themselves, and they also wanted a reliable and predictable grip. 72 With many winch users only chartering boats for a few days holiday a w w w. l e w m a r. c o m With Lewmar s glo are in the world, yo there to support yo Cordage, Rigging & Sailboat Hardware 559 Winche a e a loo in ide Lewmar fuses its legendary quality with state of the art technology to offer n ineerin e cellence the most advanced winch range ever the E . or Lewmar customers, there is no such thing as ust a winch. That s because inside every winch you will find materials developed over many Lewmar believes in evolution not revolution anu act it has been evolving and years, designed using the latest techniques and machined using the most up to date C C winch equipment.technology When we machine winches wehalf are looking improving forthealmost a century. n the last few ince the 1960 s Lewmar has developed winch solutions for the world s leading boat for the maximum in efficiency, durability and strength to weight ratio. the most hi tec Because of our aggressive in house testing program, Lewmar builders, yards race teams. winches have custom proven themselves timeand and again in the roughest o other company in the leisure capable of bui conditions and on the toughest racecourses. marine market has the same level of heritage and expertise when it comes able to control to building reliable, high quality, easy to fit and easily serviceable winches. machines. Stead a t uildin We ve taken Lewmar s tried and teste loc 7 ear cean Winch the most popular winch ever made and improved it further. The new E winch is a development that quality of our n le er icin and sailors want. o compromises have been made in terms of quality or T range that we L are required to service a Lewmar integrity design. E winch,of simply unscrewYou the topwon cap t find much plastic here, we use high quality up with a new with your fingers to remove the drum and alloys and metal 7 year warrant provide access to the proven gear train. f you try to put a Lewmar E winch u to er ocu ed together wrongly, it will become very clear that you ve got it wrong it is impossible to ulti le t le and ini he are available in black grey ey boat builders briefed us that Etheywinches wanted Lewmar toorretain all the service the winch and put it back together Wa e S rin benefits of its simple, no nonsense, easy to service winch with very few er rin sailor. The range is available with single tri been designed into every E winch. incorrectly. a We are so con contains years of knowledge and understanding of what boat builders Si ur afety and convenience has alloy and chrome bronze for the cruising With Lewmar s a andare in the world there to suppo speed or two conversion speed, manual winches and parts. t s proven performance and easy to power were in investment cast stainless Theall integrated electric electric winches are available from its favour. size 40 through to 65. steel feeder arm completely covers the winch, and does not create a rope trap above our Wave pring aws. But we knew we could make installation easier and update the styling. Directional arrows allow fool proof loading of With this in mind we have designed a winch that can either be fitted in the the winch, a very helpful feature if you are conventional manner, or without removing the drum, to speed up sailing with an inexperienced crew. lectric inche installation. This new easy fit feature uses Lewmar s The stripper position can be ad usted to Whatever sailing you do, short handed or long s stud fixings. into the cockpit, while the proven stripper ring distance cruising, the decision to install electric winches, or upgrade your existing winches with smoothly feed the rope out of the aws and goes round the Wave pring. Lewmar s uic in tallation unique design Cruising ailors confirmed they want a proven quality winch that could be ensures you cannot snag that one of our conversion kits is simple. The new Lewmar s enables one serviced the are boat owner without any tools, they wanted to be Lewmar s E by winches specifically person to fit the winch, without removing the loose rope cover, no matter how long you have been using your sheets. engineered to offer sail trimming at the push of a drum. There are and no plastic partsalso to snapwanted off, able to put the winch together themselves, they button for more relaxed and comfortable sailing. a reliable and predictable grip. ust select the correct size stud, wind it into the strong bronze centre stem and mount the winch into pre drilled holes. With many winch users only chartering boats for a few days holiday a Winches The feeder arm position can be ad usted to smoothly feed the can be installed with manual or electric ote on notallallmodels. holes are symmetrical models. or T T on studallspecifications The integrated cast stainless steel feeder armote not all holes are symmetrical The integrated investment cast stainlessinvestment steel feeder arm operation, and canorbe seamlessly integrated 560 Cordage, Rigging &aSailboat Hardware visit www.lewmar.com covers winch, andtrap does not create covers the winch, and does not the create rope above our a rope trap above our rope out of the aws and into the cockpit, while the proven with a hydraulic system. or part number refer stripper ring goes round the Wave pring. Lewmar s unique to electric and hydraulic E Wave pring aws. Wave pring aws. Winche arm position can be adthe usted to smoothly feed the The feeder arm position The can feeder be ad usted to smoothly feed you snag that cover. out cannot of the aws and the loose cockpit,rope while the proven rope design out of the ensures aws andrope into the cockpit, while theinto proven pages. eature ringpring. goesLewmar round the Wave pring. Lewmar s uniqueountin stripper ring goes roundstripper the Wave s unique n truction design ensures yourope cannot snag that loose rope cover. design ensures you cannot snag that loose cover. 15st 5 x M6 (1 2 in) c sk head screws on 94mm (37 10 in) CD Easy ervicing T o tools required T stud fixings 5 x M6 ( to in) c sk head screws on 113mm (4 30sttechnology Lewmar fuses its legendary quality with state of the art offer ser friendly direction arrows 12 ote . ot all mounting holes are symmetrical on all models. ot all mounting holes are symmetrical on all models. ot all mounting holes areote symmetrical on all models. ote in) CD (5 16 ll the benefits of the E CD range (511 32 anu acturi 5 x(1M8 c skscrews head screws on 136mm 5 x M6 2 in) c skin) head on 94mm (37 10 in) CD in) CD 15st45st Choice of three finishes. 5 x(1M8 (5c16sk in)head c skscrews head screws on 150mm (529 CD 32 in) CD 5 x M6 2 in) on 113mm (415 32 in) 30st50st Lewmar believes in evolution not revolution 15 32 n truction 5 x M6 (1 2 in) c sk head screws on 121mm (43 4 in) © 2010 Dufour Yachts Winch i en ion the most winch range ever the E i en ion Winchadvanced i en ionWinch ountin 40st T T stud specifica visit www.lewmar.com it has40been evolving and Convertable to121mm electric 6 x( M8in)( c sk in)head c skscrews head screws on 165mm st55st 5 x M6 on (4 in)(6 CDin) CD the last few years Wa e S rin a and tri er rin st 5 x M10 ( in) c sk head screws on 184mm 65 5 x M8 ( 1960 in) c sk head CD CD 45st improving winch technology for almost half a century. ince the sscrews on 136mm (5 (7in) nin) 5 16 12 38 5 16 12 34 14 11 32 the most hi tech ma are(5symmetrical on all models. or studCD specifications 5 x M8 16 in) c sk head screws on 150mm (5T29 32T in) 50stote not all holes The integrated investment cast stainless steel feeder arm Lewmar has developed winch solutions for the worldvisitswww.lewmar.com leading boat covers the winch, and does not create a rope trap above our 6 x M8 (5 16 in) c sk head screws on 165mm (61 2 in) CD 55st Wa S custom rin and and tri race er rinteams. o other company Waveepring aws. a yards builders, 5 xin M10the ( in) leisure c sk head screws on 184mm (7 65st 38 14 capable of building in) CD able to control qual ote not all holes are symmetrical on all models. or The investment cast be stainless steel feeder armfeed the Theintegrated feeder arm position ad usted tolevel smoothly marine market hascan the same of heritage andvisitexpertise www.lewmar.comwhen it comes T T stud specifications covers the of winch, and and doesinto notthe create a rope trapthe above our rope out the aws cockpit, while proven Wave pring aws. stripper ring goes round the Wave pring. Lewmar s unique machines. design ensures you cannot snag that loose rope cover. The feeder arm position can be ad usted to smoothly feed the tried and tested and to building reliable, high quality, easy to fit and easily serviceable winches. Stead a t uildin loc stripper ring goes round the Wave pring. Lewmar s unique ur qua rope out of the aws and into the cockpit, while the proven 7 ear design ensures you cannot snag that loose rope cover. cean Winch the most popular winch ever made arra 6 6 Winch en ion s We ve takeni Lewmar ote ot all mounting holes are symmetrical on all models. and improved it further. The new E winch is a development that We are so confiden 70 80 80 quality of our new E 30 40understanding 55 65 15 30 40 45 and 50 45 5550 Winch i en15 contains years ofionknowledge of what 65 boat builders70 ot all mounting holes are symmetrical on all models. and sailors want. oSel compromises have been made in terms of quality or ailin Winch S eci ication Sel integrity of design. You won t Gear findatiomuch here,o eight we quality art er atiouse L ia art o er plastic atio Gear S Latio r Smhigh Ba eeight ia 15 30 40 Sel m er alloys and50metal 49550055 lloy Black50 T T 49550057 49515055 49550056 49515057 49555055 49515056 49555057 45 ailin mWinch er el 1ication ini ini S h Moeci t 2n 1 th Mo el art 49550055 m er Mo el ini h 49550057 lloy rey50 lloy Black 49550056 50 Chrome Bronze lloy rey 49555055 lloy Black55 Chrome Bronze 49555057 lloy rey 55 50 T 15 T 50 T 15 T 55 T 15 T 55 T 2n 1 t kg 2n l 50 kg1 t 2.6 S1 2756 Gear oBlack atio1 1250 L9 1 2.6 1 atio 9 1 lloy 13.9 1er 48.6 1 t T 2.6 1 21 T 2.6 1 21 T 2.8 1 2 11 T 2.8 2n 1 t 2n lloy 13.9 rey 1 48.6 1 15.8 1 Chrome Bronze 9 1 13.9 1 48.6 1 15.8 1 Black 11.2 1 lloy 13.8 1 54 1 15.8 1 11.2 1 lloy 13.8 rey 1 54 1 kg 91 2756 1257 91 2756 1257 11.2 32631 1257 11.2 32631 kg mm l in 55 kg mm inl kg l 13.9 1 19.4 48.6 1 8.8 2.9 6.4 13.9 1 48.6 1 12.1 26.7 2.9 1 6.4 13.8 54 1 12.0 26.4 3.9 1 26.4 8.6 13.8 54 1 12.0 mm in 5 2756 3 8 29 16 2756 35 8 219 16 43263 8 219816 43263 49555056 55 T 2.8 1 11.2Chrome 2.8 1 11.2 13.8 1 37.5 54 1 105 1480 Chrome Bronze 1 13.8Bronze 1 54 1 1480 32631 17.0 15 1 8 16 43263 mm in 1 mm 188 39416 5 16 181 7Size 86Line 373ntr 8196.8 14Line in 35 mm 73 48 181 86 43511 16 58 3 8 181 7 4 86 11 58 441328 16 115 205 911 11 58 441328 16 115 205 911 50 Chrome T lloy Bronze 49565057 rey 65 6 50 T 15 30 40 its favour. 49550056 50 T 5 8196.8 14 167 416 86 8 12 5 16 1 2 196.8 8 14 5 16739416 86 8 12 5 16 1 2 8237.5 16 5916115328 115 8 12 5 16 1 2 8237.5 16 5916115328 115 33 8 8 14 5 33 8 8 14 5 17.0 205 16 With Lewmar s 8glob 41 2 41 2 5 8 16 69 413 8 125 1610 2 111616 121.5 231 921168 16 8253.5 413 16 8 18 121.5 18 5 88 12 181 15 16 2756 7 168.8 34 11 16 5 16 1 2 71 8 13 196.8 lloy Black 2.6 1 9 1 13.9 1 48.6 1 1250 19.4 93 3 2 1 4.2 1 13.8 1 29.2 1 685 1510 5.6 12.3 74 2 138 5 145.85 5 69 2 5 1 5 1 13 5 11 T 3.1 1 14.8 1 lloy 3.1 1 14.8 13.4 1 36.5 64 1 118 1700 43748 16.6 936.5 118 10 4 8 121.5 231 4 9 168 8253.5 13.4 rey 1 64 1 1700 37481 16.6 8 231 8 253.5 18 1610 16 121.5 4 16 8 18 7 1 816 45Chrome Bronze 50 5 83 4 8.8 19.4 55 65 70 2.6 1 9 1 13.9 1 48.6 1 1250 2756 12.1 26.7 25158 16 43748 lloy Black 11 14.8 5.8Chrome 11 13.2 7951 14.8 17531 23.8 4.9 1 52.4 74 148 49565056 65 T 1.9 6448.6 1 118 1700 23.8 Chrome Bronze 3.1lloy 13.4Bronze 11 40.2 642.6 11 1700 rey 13.1 93748 1 13.4 13.9 110.7 1 1250 231 2756 1138 16 9552.4 there to support yo 79 231 121.5 93 3 181 80 3 181 158.5 118 253.5 49540057 T reygo 1.9cean 1 5.8 1 please 13.2 1 go 40.2 1 795 1753 4.9 or information on the Lewmar Range to www.lewmar.com or information on the 40 Lewmar cean Rangelloy please to www.lewmar.com 10.7 74 215 16 148 513 16 158.5 61 4 79 31 8 49540056 40 T Chrome Bronze 1.9 1 5.8 1 13.2 1 40.2 1 795 1753 6.5 14.3 74 215 16 148 513 16 158.5 61 4 79 31 8 49545055 45 T lloy Black 2.4 1 7.6 1 13.9 1 44.8 1 1200 2646 7.2 15.8 87 37 16 168 But we knew we55Winch could make installation 49555055 T lloy Black 2.8 1 11.2and 1 54 1 the 3263 12.0 Sel ailin40 S eci ication 15 30 45 50 easier 55 1 13.8update 65 1480styling. 70 1 913168 8 413 93 8 12 51116161 121.5 2 58253.5 1 8 413 16 818 5 1610 8 12 58 8 12 804 5 16 1 2 5 16 1 2 7 8 18 196.8 71 8 196.8 177.7 26.4 7 105 84 35 16 1 88 14 45 Tmind welloy rey designed 2.4 1 7.6 1 13.9 44.8 1 1200 2646can 7.2 either 3 fitted 168 in 6 the 177.7 7 With this in 55 T have lloyatiorey ao 1winch 2.8 1 that 11.2 115.854 187rbe 1480 3263 26.4 Gear er atio S L 1 13.8eight m ia Ba e ia12.0 eight 84 105 Line 105 ntr 41 8 Line205 Size 35in16 8mm 14 5 16in9 16 41 8 205 ntr 118 86 33 845 88 14 5 16 9 16 91 8 231 33 8 4 231 91 8 253.5 4 231 91 8 253.5 49545057 65 8 7 16 art 49555057 m er Mo 49545056 45 elT ini Bronze h Chrome 1 t1 7.6 2n 1 13.9 1 t 1 44.8 2n 1 1200 kg 2646 l 2.4 kg 9.7 l 21.3 mm 87 37in16 58 mm 168 58 6in mm 177.7 18 196.8 Sel ailin manner, Winch ication 49555056 55 T Soreci Chrome Bronze 2.8the 1 11.2 1 13.8to 1 speed 54 1 1480 conventional without removing drum, up 3263 8.8 19.4 93 3 181 7 49550055 50 T Black 2.6 1 9 1 13.9 1 48.6 1 1250 2756 or information on the Lewmar cean Rangelloy please go to www.lewmar.com art m er Gear atio o er atio S L 58 eight r m ia 5 8Ba e ia 17.0 eight in 7 37.5 3 7 4 3Line 4 65 T lloyeasy 1 14.8 1 13.4 3748 rey 2.6lloy 1 Black 9 1 13.9 1 48.63.1 1Lewmar 1250 2756 8.8 119.464 193 1700 3 181 7 16.6 196.8 36.5 7 installation. fit Mo el This new ini h 1 t feature 2n 1 t uses 2n kg l kg s l mm in mm in mm in mm 49565055 50 T 49550057 49550056 1 9 1 13.9 1 48.6 1 1250 2756 12.1 26.7 495650575050T T 65 Chrome Tlloy BlackBronze 2.6 2.6 14.8 18.8 13.4 49550055 1 lloy 9 1 rey 13.9 1 48.6 1 3.1 12501 2756 19.41 64 93 49555055 55 T lloy Black 2.8 1 11.2 1 13.8 1 54 1 1480 3263 12.0 26.4 49550057 50 T lloy rey 2.6 1 9 1 13.9 1 48.6 1 1250 2756 8.8 19.4 93 49565056 65 T Chrome Bronze 3.1 1 14.8 1 13.4 1 64 49555057 55 T lloy rey 2.8 1 11.2 1 13.8 1 54 1 1480 3263 12.0 26.4 49550056 50 T Chrome Bronze 2.6 1 9 1 13.9 1 48.6 1 1250 2756 12.1 26.7 93 or information to 1www.lewmar.com 49555056 55 on T the Lewmar Chromecean BronzeRange 2.8please 1 11.2 1go 13.8 54 1 1480 3263 17.0 37.5 49555055 55 T lloy Black 2.8 1 11.2 1 13.8 1 54 1 1480 3263 12.0 26.4 105 49565055 65 T lloy Black 3.1 1 14.8 1 13.4 1 64 1 1700 3748 16.6 36.5 49555057 55 T lloy rey 2.8 1 11.2 1 13.8 1 54 1 1480 3263 12.0 26.4 105 49565057 65 T lloy rey 3.1 1 14.8 1 13.4 1 64 1 1700 3748 16.6 36.5 49555056 55 T Chrome Bronze 2.8 1 11.2 1 13.8 1 54 1 1480 3263 17.0 37.5 105 49565056 65 T Chrome Bronze 1 14.8 1 13.4 1 164 1700 1 1700 49565055 65 T lloy Black 3.1 3.1 1 14.8 1 13.4 1 64 37483748 16.623.8 36.5 52.4 118 s stud fixings. 35 8 1811 19335 1700 8 181 3748 7 8 1055 41 8 8 181 1 3 1700 1055 41 8 3 8 181 1051 41 8 4 8 205 1181 45 8 4 8 205 1181 45 8 4 8 205 58 118 45 8 4 231 2051 7 8 3748 2051 7 8 2051 8 16 2311 8 16 2311 8 16 231 91 8 18 71 8 mm 84 86 in 73 4 196.8 863 16.6 196.8 73 436.586 118 3 8 11 32 115 81 16 237.5 9 196.8 73 4 86 33 8 23.8 52.4 118 81 16 237.5 911 32 1153 3 196.8 7 4 86 3 8 81 16 237.5 911 32 1151 237.5 911 32 115 4 2 91 8 253.5 10 121.5 11 237.5 9 32 115 41 2 91 8 253.5 10 121.5 237.5 911 32 115 41 2 18 9253.5 253.5 10 121.5 10 121.5 413 16 Cruising ailors confirmed they want a proven quality winch that could be serviced by the boat owner without any tools, they wanted to be able to put the winch together themselves, and they also wanted a reliable65 and predictable cean Range please go togrip. www.lewmar.com T lloy rey 3.1 1 14.8 1 13.4 1 or information on the Lewmar 49565057 49565056 65 T Chrome Bronze 64 1 1700 3748 3.1 1 14.8 1 13.4 1 64 1 1700 3748 16.6 23.8 36.5 52.4 118 45 8 118 45 8 231 91 8 231 91 8 With many winch users only chartering boats for a few days holiday a cean Range please go to www.lewmar.com or information on the Lewmar 253.5 253.5 5 r m ia e ia eigh are inBathe world, yo 5 41 2 8 16 mm 11 in mm in mm 5 1 1 4568 4 10 6 8 14 3 5 12 145.85 69 482111 16 8 12 5 11 105 911 415328 4 115 205 237.5 32 237.5 216 8 16 916 516 8 115 parts. t s proven performance and easy conversion to power were all in 49540055 49565056 49550057 4065 TT 33 8 39 in 7 1 1616 837.5 eight kg l 37 88 25 16 373188 25 16 481 216 25 16 481 216 86 mm 5 93 196.8 115 93 196.8 115 105 237.5 115 105 237.5 15 5 8 16 49550055 3065 TT 49530056 49565057 in 31 719.4 8 43 4 1 26.7 7 8 3 14164 826.4 3 14164 826.4 m er Mo el ini h 1 t 2n 1 t 2n kg l benefits of3065its nonsense, easy service with TT simple, rey 65 2 1 1 14.8 4.2 11 lloy 13.8 1 1700 685 15101 16.6 4.2winch 9.2 74 43748 2 very 138 few 5 145.85 49565055 lloy T 3.1 Black 3.1 1 14.8 13.4 1 36.5 64 1 118 1700 16.6 118 10 45 lloy no Black 13.4 11 29.2 64 1to 3748 231 936.5 253.5 49530057 49565055 Line ntr Line S Lineeight Size up with amm new comp mm in mm mm in Ba e ntria Line mm in mm in 8.8 181 121 12.1 181 121 12.0 205 121 12.0 205 eyartboat 30 builders briefed us 2that they wanted Lewmar toatio retain the5 Gear atio o er9.2 SallL138 T lloy Black 1 4.2 1 13.8 1 29.2 1 685 1510 4.2 74 2 55 T 657 year warranty. 70 reight m ia mm in mm in 1 8ia 196.8 13.9 eight 1 19.4 48.6 1 1250 8.8 93 eight Ba e719.4 8.8 93 r m2756 35 ia 8 181 733548 1250 93 65.7 1250 93 65.7 1480 105 65.7 1480 105 91 2.6 1 1250 570 2.6 1 1250 5701 2.8 1480 5701 2.8 1480 l l 2n u toSeler ailin ocu Winch ed S eci ication 49530055 49555056 range that we are b ailin Winch S eci ication 6 ote 8 14 5 16 9 16 33 8 8 14 5 16 9 16 8 14 5 16 9 16 8 145 8 5 16 9 16 41 2 85 169 5 16 5 8 8 145 16 16 8 41 2 85 169 5 16 5 8 8 14 16 16 41 2 8 16 413 16 8 16 413 16 8 16 4813 18 16 10 121.5 413 16 8 18 10 413 16 121.5 8 18 85 165 16 8 5 16 5 8 85 185 5 16 11 16 16 8 85 185 16 51 51 5 16 9 16 81 16 205 237.5 9 35 16 Line Size mm in 51 5 16 11 16 8 5 11 16 581618 11 1616 5 16 11 16 5 16 11 16 81 16 237.5 9 81 16 237.5 9 253.5 561 Cordage, Rigging & Sailboat Hardware Winches Winche lectric Winche om lete lectric Winche it lectricfuses Winch it 1 (24 units arestate also available) Lewmar its legendary quality with of the art technology to offer eature art m er Mo el e cription the most advanced winch range ever the E . ush Button ower 49540210 40E T anu act lloy Black Complete 49540201 believes 40E T in evolution Chrome Bronze Complete Lewmar not revolution 49540200 40E T lloy 49545210 45E T lloy Black Complete uiet operation it has been evolving and rey Complete improving winch technology for almost half a century. Manual override ince the 1960 s benefits of the E ll the n the last few range Easy to install Lewmar developed winchBronze solutions 49545201 has45E T Chrome Complete for the world s leading boat the most hi tec capable of bui nclusive of contactor and motor units 49545200 custom 45E T yards and lloy race rey Complete builders, teams. o other company in the leisure 49550210 50E T lloy Black Complete marine market has the same level of heritage and expertise when it comes able to control to49550200 building reliable, high quality, easy to fit and easily serviceable winches. 50E T lloy rey Complete machines. 49550201 50E T Chrome Bronze Complete 49555210 55E T lloy Black Complete 49555200 55E T lloy 49555201 Chrome Bronze Complete Stead a55EtT uildin loc We ve taken65E Lewmar s 49565210 T rey Complete cean lloy BlackWinch Complete the most popular winch ever made 49565201 65E itT further. Chrome BronzeE Complete winch is a development that and improved The new 49565200 65E T lloy it includes Deck unit, motor gearbox, E series connected to motor 40 50, or control box 55 65, circuit breaker 40 50 or fuse 55 to 65, deck switch. © 2010 orthshor outh r or information on the Lewmar cean Electric Range please go to www.lewmar.com and sailors want. o compromises have been made in terms of quality or integrity of design. You won t find much plastic here, we use high quality thatitwor at the uSel to ailin lectric Winch Winch o lete eight alloys and metal u h o a utton m er Mo el ini h kg ey boat builders briefed us that they wanted Lewmar to retain all the there to suppo 48570207 t s proven 70 3 E T performance lloy rey and easy 48.0 105.8 parts. conversion to power were all in 48580201 80 E T Chrome range that we are in the worl benefits its simple, no nonsense, easy to service winch with very few back up, or toof experience sailing. 48570206 70 3 E traditional T Chrome 54.8 120.8 erie49.3 quality of our n With Lewmar s to48570205 perfection removing winch motor. Manual 70 3the E Tneed of a 2 speed lloy Black 48.0operation 105.8is available as a electric80 E otor include T lloy Black lectric load en in 108.7 The E series controller is equipped with a 55.3 121.9 thermal trip to monitor the motor temperature, 49.3 108.7 which ensures a cut out if the heat builds up 51.3 113.1 to an unacceptable level. 57.3 126.3 vailable on the E electric winch range 51.3 113.1 40, 45 50. a 7 year warrant l u to er ocu ed e 7 ear up with a new That s exactly what you will find with Lewmar s electric winch range. Lewmar electric winches are 48570210 70 E T lloy Black 42.0 92.6 available with 2 levels of control E series and EL . Both are fitted with a series wound motor 48570201 70 E T Chrome 48.8 107.6 allowing the sheet to be recovered rapidly at low load when sheets are slacker, and slows down 48570200 E provides T 92.6as you tune your sails as load increases. 70 This speed lloy whenrey you need it most,42.0 and control 48580210 its favour. controller tried and teste We are so con rey Complete contains years of knowledge and understanding of what boat builders art u S ioneered by Lewmar, EL (Electric Load ensing) electric winches are controlled by an 48580200 E T could make lloy rey But we knew80we installation easier and update the styling. verload rotection Control Box, which allows 48580205 80 3 E T Black the winch to be operated up to the safe With this in mind we havelloydesigned a winch that can either be fitted in the 48580206 80 3 E T Chrome conventional manner, or without removing the drum, to speed up 48580207 80 3 E T lloy rey working load of the specific winch. o hr nce this installation. This fit Box. feature uses Lewmar s it includes Deck nit, Motor new earbox,easy and Control out. nce the load is reduced to below the s ctr c load is exceeded, the winch automatically cuts safe working load, the winch can be restarted. stud fixings. The EL features the additional safety function The Lewmar E and cean winch can easily be converted into an Elect lectric on er ion of a Motor Thermal Trip, which ensures that basic winch needs a conversion kit toout form the basic Electric Winch De Cruising winch that could the motorbe cuts in the event of excessive it ailors confirmed they want a provenThequality Lewmar supplies a new motor gearbox with serviced by the boat owner without any tools, they wanted to be O inch Ocean inch the E series controller pre mounted. This art m er art m er able to solution put the winch together themselves, and they also wanted convenient removes any complicated wiring for the installer and keeps the boat a reliable and predictable grip. looking very tidy. or art o refer to p.82 heat build up. EL is available on the E e cription Electric Winch Range ize 40 to 80. 48540055 48040055 40 T Conversion it 48545055 48046055 45 46 T Conversion it – 48048055 48 T Conversion it 48550055 48050055 50 T Conversion it With many winch users only chartering boats for a few days holiday a year, safety is key in any new developments. We have included in Self-Tailing Standard WincheWinches Cordage, Rigging & Sailboat Hardware 562 Standard and S ort Winch i en ion Self-Tailing Winches Standard Winche Winches Self-Tailing OCEAN STANDARD WINCHES Stan ar inch hrome Stan ar inch Gre Allo O inch ize 40 convertible to electric Choice of finishes Black alloy or Chrome bronze Lewmar draws upon years of winch design and manufacture to ensure O Sport inch Black Sport hrome that the tandard is aon high quality, hard wearing control solution. ot all mounting holes are Winch symmetrical all models. ote The long glass fibre reinforced, composite plastic stem is strong and light, while also providing efficient plain bearing. vailable in sizes Lewmar draws upon years of winch design and manufacture to ensure ranging 6years to 16,ofinwinch one ordesign two speeds, and in a choice of two Lewmar draws from upon and manufacture to ensure that the Standard Winch is a high-quality, hard-wearing control solution. S ort Winch S eci ication finishes, the Lewmar tandard Winch is supported by a comprehensive that long the glass-fibre tandard Winch is a highcomposite quality, hard wearing solution. The reinforced, plastic stemcontrol is strong and light, while also providing efficient in sizes art long Gear composite atioplainobearing. erplastic atio Available S Lis strong eight r m ia range of winch spares. The glass fibre reinforced, stem and ranging 16,h in one1or of m er from Mo6elto ini t two 2n speeds, 1 t and 2n inkga choice l kg two l mm in light, while providing efficient plainisbearing. vailable in sizes finishes, thealso Lewmar Standard Winch supported by a comprehensive 49530075 30 lloy Black 2 1 4.2 1 13.8 1 29.21 685 1510 4.2 9.2 74 215 16 range of from winch6 spares. ranging to 16, in one or two speeds, and in a choice of two Wavespring StandardWinches and S ort Winch Tailing Self-Tailing Wavespring i en ion 49530076 Chrometandard 2 1 Winch 4.2 1 is 13.8 1 29.21 685 5.6 12.3 finishes, the 30 Lewmar supported by a1510 comprehensive 74 49540075 40 spares. lloy Black 1.9 1 5.8 1 13.2 1 40.2 1 795 range of winch 1753 4.9 10.7 74 49540076 40 Chrome 1.9 1 5.8 1 13.2 1 40.2 1 795 1753 ote ot all mounting holes are symmetrical on all models. 6.5 14.3 74 Ba e ia mm in 138 mm eight in Line ntr mm in 57 16 145.85 53 4 69 211 16 Stan ar inch hrome 7 3 5 16 145.85 5 4 69 211 16 215 16 138 21 148 5 14ST5 One-Speed13 Self-Tailing 1Winch 16 215 16 158.5 6 8 12 5 16 1 2 8 12 5 16 1 2 Stan ar 4 79 31 8 8 12 5 16 1 2 148 513 16 158.5 61 4 79 31 8 8 12 5 16 1 2 16 14 One-Speed Self-Tailing Winch Self-Tailing Winches Wavespring Self-Tailing Self-Tailing Winches 14 One-Speed Self-Tailing Winch Self-Tailing The ultimate self-tailing design, this winch is simple Standard and S ort Winch Standard Winch S aeci to use and provides firm ication grip on the line. Adapts to i en ion S ort Winch S eci ication design,o this winchS isL simple eight art The ultimate self-tailing Gear atio er atio ote aotwide all mounting are symmetrical on allautomatically. models. rangeholes m er iniofh line 1diameters t 2n Gear 1atio t 2n o erkg atio l S kg l artMo el L to and provides grip thewinch Adapts m er Mo el iniah firm 1 t on 1line. t kg to l kg Theuse ultimate self-tailing this simple Self-Tailing 49006010 6 lloy 1Winches 1 design, 6.82n 1 3412nis 752 0.5 1.1 Line Size mm in ST Stan ar inch inch Gre Allo 16ST One-Speed Self-Tailing W Self-Tailing Winch Dimens 16STAllo One-Speed Self-Tailing all mounting holes are symmetrical on all W StanNote: ar Not inch Gre hrome 16ST One-Speed Self-Tailing W ST Self-Tailing Winch Dimens r m ia Ba e ia eight Line ntr in r m mm inBa e mm in eightmm in ntr ia ia Line in mm in mm in mm3 in 5mm 11 1 mm eight l Note: Not all mounting holes are symmetrical on all MoLine nting Sizen tr ction mm in 1 59 2 16 94 3 16 83 3 4 35.5 1 8 4 x M6 ( 4 in) c sk head screws on 19 32 5in) 49530075 30 lloy Black 2 1 4.2 1 13.8 1 29.21 685 1510 4.2 9.2 74 215 16 11 138 57 16 145.85 53 4 693 21166mm 16 8(212 16 1CD 2 5 1 19006100 6range Chrome 1 6.8 1 341 752 1.1 2.4 59 2 16 94 3 16 83 3 4 35.5 1 8 atowide of line1adiameters automatically. use and provides firm grip on the line. Adapts to 7 16 145.85 53 4 11 16 5 16 1 2 49530076 30 ChromeS eci 2 1 ication 4.2 1 13.8 1 29.21 685 1510 5.6 12.3 974 215 16 138 5 69 2 8 12 S ort Winch 49007030 7 lloySelf-Tailing 1 1 Winch 7.9 1 341 752 0.8 1.8 48ST65Two-Speed 2 16 108 41 4 102 46ST Two-Speed Self-Tailing Winch 4 40 19 16 5 x M6 (1 4 in) c sk head screws on 5 16 14 5 16 1 2 5 32 in) 49540075 40 line lloydiameters Black atio 1.9 1 automatically. 5.8 1 13.2 1 40.2 1L 795 1753 4.9 10.7 74 21Ba 148 513 16eight 158.5 6Line 79 3180mm 8 8(312 CD 9 1 art Gear o er atio S eight r m ia e ia Size a wide range of 49007032 7 Chrome 1 1 7.9 1 341 752 1.7 3.7 65 2 16 108 4 4 102 4 40 ntr19 16 Line 5 13 1 1 5 16 1 2 m er 49540076 Mo el ini40h Chrome 1 t 2n 1 t 2n kg l kg l mm in mm in mm in mm in mm in 1.9 1 5.8 1 13.2 1 40.2 1 795 1753 6.5 14.3 974 21 16 148 5 16 158.5 6 4 79 3 8 8 12 49008030 8 lloy 11 7.9 1 455 1003 1.4 3.1 65 2 16 108 41 4 103 41 16 40 19 16 x M6 (1 4 in) c sk head screws on 5 16 5One-Speed ST 1510 One-Speed Winch 168 ST12580mm Self-Tailing Winch 49530075 30 lloy Black 2 1 4.2 1 13.8 1 29.21 14 685 4.2 Self-Tailing 9.2 74 21 138 5714 16 ST 145.85 53 4 Self-Tailing 69 211 16Winch 16 152 One-Speed 16ST (3 32 in) CD 9 1 1 9 49008032 8 Chrome 1 1 7.9 1 455 1003 2.3 5.1 65 2 16 108 4 4 103 4 16 40 1 16 49008012 5 16 7 16 145.85 34 11 16 5 16 1 2 49530076 30 Chrome 2 1 4.2 1 13.8 1 29.21 685 1510 5.6 12.3 74 21 138 5 5 69 2 8 12 46 ST Two-Speed Self-Tailing Winch 48 ST Two-Speed Self-Tailing Winch Wavespring 49016030 16 lloy 11 2 1 7.9 1 16 1 570 1257 2.1 4.6 67 2 5 8 120 43 4 112 47 16 55 23 16 c sk head screws 5 x M6 (1 4 in) 14ST One-Speed Self-Tailing Self-Tailing Winchon 14 1 8ST 8One-Speed 49540075 40 lloyWinch Black 1.9 1S5.8eci 1 13.2ication 1 40.2 795 1753 74 215Winch 16 148 513 16 158.5 79 316 12 5 16 111 2 14ST 1One-Speed Self-Tailing4.9 Winch 10.7 16ST One-Speed Self-Tailing6Winch Standard 94mm (3 16 in) CD 58 34 7 16 3 16 49016032 16 Chrome 1 1 2 1 7.9 1 16 1 570 1257 3.2 7.0 67 2 120 4 112 4 55 2 Self-Tailing The self-tailing design, 49540076 40 Chrome 1.9 1ultimate 5.8 1 13.2 1 40.2 1 795 1753 this 6.5 winch 14.3 is simple 74 215 16 148 513 16 158.5 61 4 79 31 8 8 12 5 16 1 2 espring Wavespring Wavespring Tailing Self-Tailing Expert Advice Self-Tailing self-tailing design, art this 50STwinch is simpleGear atio o STer atio S L eight 50 5 ⁄ el 5 ⁄ ") kg The ultimate design, this ini winch mself-tailing erRope (Mo h is simple 1 t 2n 1 t (2n l kg l 8mm 16mm Rope 16") 8grip on the to use and provides a firm line. Adapts ultimate self-tailing design, this winch is simple to use and provides a firm grip on the line. Adapts to 49006010 6 lloy 11 6.8 1 341 752 0.5 1.1 The a firm grip on the line. Adapts to rovides W a wide range oftoWINCHES line6.8 automatically. OCEAN ST 50 ST SELF-TAILING ST 50diameters a wide range ofaline diameters to use and provides firm grip onS the line. 1Adapts 19006100 6 automatically. Chrome 1 1 341 752 1.1 Standard Winch eci ication r m ia in to mm 59 Ba e ia mm in 2 5 16 94 lloy 11 7.9 1 341 752 0.8 1.8 65 2 108 5 ⁄ ") 16 7 h 5 ini 19006100 6 49008032 kg 752 l1.7 mm 3.7 6.8 1 7.9 1 341 752 1.1 2.4 455 1003 2.3 14 9 16 311 59 16Two-Speed 16 83 35.5 5.1302ST565 294 108 41 4 3103 41 16 13408 Self-Tailing Winch 19 16 11 7.9 2 11 0.8 1.8 7.9 1 341 16 1 752 570 1257 2.1 65 16 4.6 2 9 67 Chrome 1 1(5 ⁄8") 1 1 Rope 16 16mm Chrome 7.9 2 11 1.7 3.7 7.9 1 341 16 1 752 570 1257 3.2 65 16 7.0 2 9 67 49007030 7 49016030 50ST lloy 16 11 lloy 50ST D 49008030 49016030 8 8 lloy Chrome 16 lloy ST 11 7.9 1 11 ST 7.9 1 5 7.9161 11 21 455 1003 30ST Two-Speed Self-Tailing1.4 Winch 3.1 16 1 455 1003 2.3 570 1257 2.1 ST5.1 5 65 2 9 16 65 2 9 16 4.6 8 67 Part Gear Ratio Power Ratio ST 16mm Rope 8mmSelf-Tailing Rope (5 ⁄16") ( 5 ⁄8") 49014001 1450 STWinch Chrome Specifications 2:1 15.8:1 5 32 in) CD 66mm (2 19 32 in)(3CD 80mm Self-Tailing W 40ST byTwo-Speed can using a base wedge that be theachieved rope enters the drum at an an 108 25 8 14 4120 102 43 4 4 112 7 16 1955 16 440 c sk(1 head onscrews on 253x16M6 (1 45in) 4 in) cscrews sk head x M6 108 25 8 14 4120 102 43 4 4 112 7 16 1955 16 440 23 16 B 108 41 4 Self-Tailing 103 41Winch 16 40ST Two-Speed Gear Ratio Power Ratio Weight Drum Dia Base Dia Self-Tailing Winch Specifications 50 50 Model Finish 8mm Rope 1st ( ⁄ 2nd 1st 2nd16mm Rope kg ( ⁄ ")lb mm in mm in ") W S G Self-Tailing Winch Specifications Wavespring 49014000 14 Alloy 50 2:1 15.8:1 2.3 5.1 65.7 2⁄ 121 4⁄ 50 Part 49008032 Number that rope enters the drum at an ang Whenthe installing a winch, Lewmar recom 5 x M6 (1 4 in) c sk head screws on 80mm n(3 tr5 32ction in) CD 19 16Mo nting 11 Self-Tailing Winch Specifications 49007032 8mm Rope (5 ⁄16") 7 49016032 19 16 40ST Two-Speed to 10° to the axis of theSelf-Tailing winch. ThW winch be base mounted in) c sk onscrews on on an even surfa 149x16M6 (1 45the 4 in) cscrews sk head x M6 (1 head 1 ( 5 ⁄ ") 16mm 7.9 Rope 8 l 341 4 Line ntr40 mm in 4 40 75 4 x M6 (1 4 in) c sk head screws on in in 30STin65Two-Speed108 Self-Tailing102 Winch 14 9 16 311 59 16 16 83 35.5 3.1 2 5 65 294 108 41 4 3103 41 16 13408 Chrome 11 8 Chrome kg 13 8 the mounted on an even surfa S a 66mm awinch Wbe 40 S Expert (2 19 32 in) CDAdvice ST Two-Speed Self-Tailing W 752 0.5 1.1 455 1003 1.4 11 lloy mm 41 4 35.5 When installing Mo nting n tr ctiona winch, Lewmar recom 7.9 1 341 lloy 8 2n 16 mm 2 9 16 35.5 13 8 6.8 1 49006010 6 49008030 1 t 31 4 Line ntr mm in 11 Rope ( ⁄16") snag-free8mm operation. 1 t 2n Chrome 11 83 41 4eight102 adjusting springs. ItGear handles smallerS diameters, as well asr m theiatraditional artself atio today o er s atio L eight Ba e ia a wide with range of line diameters automatically. 50ST 50ST m er 49007032 Mo el eight in S G S 2.430ST 59Two-Speed 2 5 16 94Self-Tailing 311 16 83Winch 31 4 Self-Tailing Winches larger Dacron composite ropes. A sleek, minimum-friction feeder arm provides absolute 7 mm 311 16 The Lewmar Wavespring our renowned and gentle wave grip feature of line diameters automatically. 8mm Rope (5 ⁄16") self-tailer combines 16mm Rope ( 5 ⁄8") 9 49007030 One-Speed Self-Ta 108 41 4 103 41 16 2 5 8 D 120 43 4 112 B 47 16 34 47 16 43⁄4 9 16 40 H mounting thebase winch. to 10° to the axis of the winch. Th 11 16 in) CD 80mm (3 594mm 32 in) (3CD L 19 16 5 x M6 40 1 80mm (3 5 32 in) CD 55 H S 23 16 Height9 mm 121 16 in 43⁄4 23 16 43⁄4 (1 4 in) c sk head screws on Line Entry Line Sizeby using a base wedg can be achieved mm in mm in Mounting Instructio ascrewsW in) cask head on 5 x M6 (1 L4S mounting the winch. 5 6-10 1⁄4 -3⁄8 58 (3 11 16 2 in) ⁄16 CD 94mm S 75 5 x M6 (1⁄4 in) c’sk head 40ST(3 11Two-Speed /16 in) PCD Self-Ta 49016032 16 Chrome 1 1 2 1 7.9 1 16 1 570 1257 3.2 Weight 7.0 67 Drum Dia 120 112 55 Dia Height WinchLine Entry5 Line Size 30STBase Two-Speed Self-Tailing 3.1 54Self-Tailing 6.8 65.7 D 2 9Self-Tailing ⁄16 121 121 58 2 ⁄16 6-10 14ST One-Speed ST One-Speed Winch 1⁄4in-3⁄8 Self-Tailing 50ST Two-Speed ST 16mm Rope ( 5Finish ⁄8") Winch Number Model 1st 2nd 1st 2nd kg lb Two-Speed mmWinch in mm BWinch in mmH 16in mm L Self-Tailing in mm Mounting Instructio Self-Tailing 9⁄16 5⁄16 5⁄16 -1⁄2 49016000 16ST Gear Ratio Alloy Power Ratio 2:1 2.9 6.4Line EntryDrum 65.7 2Size 121 Dia 43⁄4 145.5 53⁄ST 4 58 Entry 2Self-Tailing 8-12 Part Gear Ratio Power Ratio Weight Dia Base Height Line Line Size Part Weight Drum15.8:1 Dia Base Height Line 30 ST DiaTwo-Speed Self-Tailing Winch Two-Speed Winch 40 9 3 3 5 1 3 49014000Model Finish14ST 1st 2ndAlloy 1st 2nd 2:1kg lb mm 15.8:1 2.3 5.1 65.7 2 ⁄16 121 43⁄4 121 43⁄4 58 25⁄16 6-10 5 ⁄4 - 1⁄8 5 x M6 (1⁄4 in) c’sk head Number in mm in mm in 8.6mm in65.7 mm 2 9⁄in16 Mounting 49016001 16ST Chrome 2:1 15.8:1 3.9 121 Instructions 4in⁄4 145.5 5in⁄4 40S 58aTwo-Speed 2a ⁄16 W 8-12 ⁄16inS- ⁄2WinchMounting 11/16 in) Number Model Finish 1st 2nd 1st 2nd kg lb mm in mm mm mm in mm Instructio W S G S 30 ST Two-Speed Self-Tailing Winch ST Self-Tailing 9 3 3 5 1 3 75 (3 in) c’sk head 5 x M6 (1⁄4PCD 49014001 14ST Chrome 2:1 15.8:1 3.1 6.8 65.7 2 ⁄16 121 4 ⁄4 121 4 ⁄4 58 2 ⁄16 6-10 ⁄4 - ⁄8 ST ST D B 25 8 43 4 L H 49014000 Alloy 2:1 15.8:1 winch is 5.1 65.7 2⁄ 121 4⁄ 121 4⁄ -⁄ 5 x M6 ( ⁄ in) c’sk head The ultimate14self-tailing this 49016019* 16ST design, Bronze 2:12.3 simple 15.8:1 3.9 8.65858 22 ⁄⁄ 65.7 6-10 2 9⁄⁄ ⁄16 121 433⁄4 screws on 94mm 145.5 533⁄4 58 255⁄16 8-12 51⁄16 -31⁄2 11/16 in) (3 / in) PCD 49014001 14 Chrome 2:1 2 ⁄ 121 4⁄ 121 4⁄ -⁄ (3 49014000 14ST Self-Tailing Alloy 15.8:1 Winch 2:13.1 6.8 65.7 15.8:1 2.3 5.1 65.7 6-10 2 999Self-Tailing ⁄16 121 Winch 433⁄4 121 433⁄4 58 255⁄16 6-10 55 ⁄4 - 11⁄8 5 x M6 (1⁄4PCD in) c’sk head ST Two-Speed 50 ST Two-Speed 54 49016000 16 ST Alloy 2:1 15.8:1 2.9 6.4 65.7 2 ⁄ 16 121 4 ⁄ 4 145.5 5 ⁄ 4 58 2 ⁄ 16 8-12 16 -- ⁄⁄22 49016003* 16 ST All Chrome 2:1 15.8:1 4.1 9.0 65.7 2 ⁄ 16 121 4 ⁄ 4 145.5 5 ⁄ 4 58 2 ⁄ 16 8-12 ⁄⁄16 16 Alloy 2:1 15.8:1 2.9 6.4 65.7 2⁄ 121 4⁄ 145.5 5 ⁄ 58 2⁄ 8-12 ⁄ -⁄ 11/16 in) PCD 9 3 3 5 1 3 to49016000 use and provides a firm grip on the line. Adapts to (3 49014001 14 ST Chrome 2:1 15.8:1 3.1 6.8 65.7 2 ⁄ 16 121 4 ⁄ 4 121 4 ⁄ 4 58 2 ⁄ 16 6-10 ⁄ 4 - 1⁄8 9 3 3 5 5 49016001 15.8:1 2⁄ 121 4⁄ 145.5 5 ⁄ 8.658 2 ⁄ 65.7 8-12 2 9⁄ ⁄16 49016001 16 Chrome16 ST 2:1 All Chrome 2:1 3.9 121 43⁄⁄44 screws on 94mm 145.5 553⁄⁄44 58 16 8-12 5⁄⁄16 16 --1⁄⁄22 49016002* 16ST Bronze 2:13.9 8.6 65.7 15.8:1 15.8:1 4.1 9.0 65.7 2 ⁄16- ⁄ 145.5 58 225⁄⁄16 8-12 5 x 121 M6 ( ⁄ in) c’sk4head 5 x M6 (1⁄4 in) c’sk head 49016019* 16 Bronze 2:1 15.8:1 3.9 8.6 65.7 2⁄ 121 4⁄ 145.5 5 ⁄ 58 2⁄ 8-12 ⁄ -⁄ (3 / in) PCD 49016000 16ST 2:1 Bronze Alloy 2:14.1 9.0 65.7 15.8:1 2.9 49016019* 3.9 8.658 2 ⁄ 65.7 8-12 2159⁄ ⁄16- ⁄ 121 473⁄4 145.5 553⁄4 58 2115⁄16 8-12 55⁄16 -11⁄2 a49016003* wide range16of line diameters automatically. All Chrome 15.8:1 2 ⁄ 121 4⁄ 145.5 5 ⁄ 6.4 D B 5 ⁄16 BH 6 ⁄16 L H69 (3 11/16 in) PCD 49030000 30 ST Alloy 2:1 4.2:1 13.8:1 29.2:1 4.2 9.2 74 2 ⁄ 16 138 160.5 2 ⁄ 16 8-12 ⁄ 16 - ⁄2 D L 49016002* 15.8:1 2⁄ 121 4⁄ 145.5 5 ⁄ 49016001 16 All Bronze16ST 2:1Part 2:14.1 9.0 65.7 15.8:1 3.9 8.658 2 ⁄ 65.7 8-12 2159⁄ ⁄16- ⁄ 49016003* AllChrome Chrome 9.0 121 Dia473⁄4 145.5Dia 553⁄4 Height 58 25⁄16 8-12 55⁄16 -11⁄Line 2 Gear Ratio4.1 Power Ratio2 ⁄Drum Weight Drum Base 49030001 30 Chrome 4.2:1 29.2:1 5.6 74 8-12 2 ⁄ ⁄16 138 5 ⁄16 160.5 6 ⁄16 69 Entry 211⁄16Line Entry 8-12Line ⁄16 - ⁄2 Size 5 x M6 (1⁄4 in) c’sk head 49030000 Alloy 30ST 2:1 4.2:1 13.8:1 29.2:1 2:1 4.2 9.2 74 13.8:1 2 ⁄ 138 5⁄ 160.5Weight 6 ⁄ 12.369 -⁄ Part Gear Ratio Power Ratio Dia Base Dia Height Line Size 9 3 3 5 5⁄16 1⁄2 49016019*30 Chrome16ST 2:1Number Bronze 15.8:1 3.9 8.6 65.7 2 49016002* All4.2:1 Bronze 4.1 9.0 ⁄ 16 121 4 ⁄ 4 145.5 5 ⁄ 4 58 2 ⁄ 16 8-12 5 x11M6 (1⁄4Mounting in) c’sk head 49030001 13.8:1 29.2:1 2:1 5.6 12.3 74 2 ⁄ 138 5 ⁄ 160.5 6 ⁄ 69 2 ⁄ 8-12 ⁄ ⁄ D B L7 2nd 1st 12.32nd kg 2 15H ⁄lb mm in mm in mm in in Ins Model 4.2:1Finish13.8:1 1st 5⁄16 11⁄16 mm 8-12in 5⁄16 mm 1⁄2 (3 /16 in) PCD 49030019* 30 ST Bronze 2:1 29.2:1 5.6 74 16 138 5 ⁄ 16 160.5 6 69 2 5 x mm M6 ( ⁄ in) c’sk head screws on 113mm Number Model Finish 2nd 74 15.8:1 1st kg 6 ⁄ 9.0 lb69 2 ⁄65.7 mm 8-12 2159⁄ ⁄in mm 553⁄in4 mm 2115⁄16in mm 55⁄16 in Mounting 49030019* 30 Bronze 13.8:1 29.2:1 1st5.6 12.3 2 ⁄ 1382nd5 ⁄ 160.5 -⁄ 7/16 in) PCDInstructio 3in 1⁄2 49016003* 16 ST 2:1 All4.2:1 Chrome 2:1 4.1 16 121 4 ⁄ 4 145.5 58 8-12 (4 (4 / in) PCD 7 1 rt Ratio Weight 97⁄⁄16 1⁄4 -3⁄8 5⁄⁄16 49030000 30 All Chrome30 ST Gear Alloy 13.8:1 29.2:1 4.2 9.269 Dia 742.38-12 Height 16 138Line255Entry 16 160.5Line 16 69 43⁄42211⁄⁄16 16 58 8-12 8-12 16 6-10 -1⁄⁄22 49030003* 2:1 49014000 13.8:1 Power 29.2:1 2:1 5.8ST 4.2:1 12.8 Alloy 74 13.8:1 2 ⁄ 138Drum 5 ⁄ Dia 160.5 15.8:1 6 ⁄ Base 2 ⁄ 74 -⁄ 14 2:1 65.7 121 4366⁄4Size 12169 25⁄16 5⁄⁄16 5 x M6 (1⁄4 in) c 49030003* 30ST All4.2:1 Chrome 2:1Ratio 4.2:1 29.2:1 5.8 12.8 22 159⁄ ⁄⁄5.1 16 138 ⁄316 160.5 34 5⁄16 -1⁄2 49016002* 16 Bronze 15.8:1 9.0 215⁄ ⁄716-⁄16 121 4 in 145.5 58Mounting 21153⁄16 8-12 9⁄16 5⁄16Instructions 5⁄16 1-9⁄16 1 3 49030002* All Bronze 2:1 All 4.2:1 13.8:1 29.2:1 2:15.8 12.8 2 lb ⁄ 138 160.5 6 ⁄ mm 69 2in⁄65.7 ⁄ 2nd kg74 13.8:1 mm5 ⁄ 4.1 in7.215.8:1 mmH 4366⁄54557⁄⁄⁄16 in mber Model 30Finish 49046055 46ST ST 1st Alloy 7.6:1 13.9:1 44.8:1 15.8 87 168mmB 25549677⁄⁄516⁄16 ⁄L8 192 8-14 (3 11/16 in) PCD 49030001 30 ST 2:1 5.6 12.3 743.18-12D mm 16 in 65.7 138 16 160.5 16 6984 16 58 8-12 8-12 16 6-10 49014001 ST 4.2:1 Chrome 2:1 121 12169 43⁄4L2211 25⁄16 55⁄⁄16 ⁄4 - ⁄8 49030002* 30 ST AllChrome Bronze 1st 2.4:1 2:1142nd 4.2:1 13.8:1 29.2:1 5.8 12.8 74 22H153⁄⁄6.8 16 138 160.5 ⁄⁄16 --1⁄⁄22 D29.2:1 B 1⁄4 in) c’sk head 49040055 40 Alloy 1.9:1 5.8:1 13.2:1 40.2:1 4.9 10.7 74 2 ⁄ 148 5 ⁄ 173 6 ⁄ 79 3⁄ 8-12 ⁄ -⁄ 5 x M6 ( 7⁄16 3 5⁄85 9⁄16 5⁄16 5⁄16 1-9⁄16 15 7 5 11 5 9 3 1 3 1 49046056 46 ST Chrome 2.4:1 7.6:1 13.9:1 44.8:1 9.7 21.3 87 3 168 6 192 7 84 3 8-14 49030000 Alloy 13.2:1 15.8:1 4.2:1 29.2:1 9.279 43 ⁄⁄Drum 742.98-12 Dia 2 ⁄ ⁄16 49030019* Bronze 5.6 138 59 ⁄162 ⁄16 121 160.5 695 x M6 8-12 -194mm ⁄2 5⁄16 -1⁄72 3⁄42( ⁄4⁄16 5screws 014000 49040056 14ST 65.7 24.2 ⁄16Weight 121 121 58 Dia 6-10 436⁄413⁄⁄416- ⁄8 145.5Line in) c’sk head on8-12 40 Alloy Chrome30ST 2:1 1.9:149016000 5.8:1 40.2:1 2:1 6.5ST Ratio 14.3 2.3 74 13.8:1 2 5.1 ⁄ 148 5 ⁄ 173 6 ⁄ 12.3 - ⁄ 4 ⁄4 65.7 16 Alloy 2:1 15.8:1 2Line ⁄16 5⁄⁄16 Part Gear Power Ratio Base Height Size Ratio Power Weight Drum Dia Base Dia 474 Height Line Entry 49040055Gear 40ST 1.9:1 AlloyRatio 1.9:1 5.8:1 13.2:1 40.2:1 4.9 10.7 2 15⁄ ⁄76.4 16 148 5213⁄16 ⁄165 173 6Line ⁄9163 Size79 115 Entry 31⁄58 58 8-12 16 - ⁄2 (4 /16 in) PCD 5⁄8screws 5⁄16 1-9⁄16 40 5.8:1 13.2:1 40.2:12.4:1 6.5 14.3 2 ⁄ 148 5 ⁄ 6 ⁄ 21.3 -⁄16 ⁄ 9173 11 121mm M6 ( ⁄ in) (3 5/316⁄42in) 49046057* 46STST 2:1 49016001 Bronze 7.6:1 13.9:1 44.8:1 3⁄8.6 168 192 3⁄PCD ⁄1658 8-12 8-14 967⁄⁄16 5⁄16 5⁄16 014001 49040057* 14ST ChromeBronze30 15.8:1 2:116 3.1 74 13.8:1 6.8 2:1 65.7 25.8 ⁄9.7 16 15.8:1 12.8 12179 433⁄⁄487 43⁄45 x 65.7 58c’sk25head 6-10 436⁄4517⁄416 -⁄16⁄8 145.56984 49030001 5.6 12.3 49030003* AllChrome Chrome 29.2:1 743.98-12 121 2 15 16 138 162 ⁄16 on 121 160.5 16 ⁄2 5⁄165 -x1⁄M8 ST 4.2:1 Chrome 2 8-12 2 5⁄16 in 1⁄2 (5⁄16 in) c’sk 4head in) PCDmm Number Model 1st 2ndlb 74 13.2:1 1st kg mm lb79 in 3 ⁄ mm mm mm mm mm 31Mounting mmInstructions Mounting 49040058* Steel 5.8:1 13.2:1 14.1 2 mm ⁄ 1482nd 5in ⁄ 173 6 ⁄ 14.3 - ⁄ in (4 /148 49040056 40ST 1.9:11stFinish Chrome 40.2:1 6.5 74 8-12 2 15⁄ in ⁄716 513in ⁄516 in 173 613⁄in 16 79 ⁄ 8in 8-12 el Finish 1st40 Stainless 2nd 2nd 40.2:11.9:1 kg6.4 5.8:1 mm in in) c xInstructi M6 5 x M6 (1⁄45in) c’sk(1⁄head 9 3 557 3 11 5 49046058* 46STST 2:1 Steel 7.6:12.9 13.9:1 44.8:1 20.7 3⁄ ⁄8.6 168 58 25967⁄⁄1616⁄285⁄16 121 192 8-14 9173 40 AlloyAll Chrome 1.9:1Stainless 13.2:1 15.8:1 40.2:12.4:1 6.7ST 4.2:1 14.7 74 13.8:1 2 6.4 ⁄ 148 5 ⁄ 6 ⁄ 12.8 79 -⁄16 ⁄ 53⁄4 65.7 49030019* Bronze 2:116 29.2:1 12.3 49016019* Bronze 2:1 25⁄16 55⁄516⁄168-12 49030002* 30 All5.8:1 Bronze 5.8 743.98-12145.5 2 15 16 138 160.5 -11-⁄92⁄16 5⁄16(5-111⁄7/232 in) PCD 016000 49040059* 16ST 65.7 25.6 ⁄9.4 16 15.8:1 121 433⁄⁄487 8-12 4 6⁄413 ⁄⁄1616⁄-161⁄2145.56984 5 ⁄42 31⁄16⁄1658 8-12 15 13 (3in)11/16c’sk in)head PCD 1⁄PCD 49040057* 40ST 1.9:1 5.8:1 Bronze13.2:1 40.2:11.9:16.7 5.8:1 40.2:1 6.5 148 5 ⁄ 16 173 6 ⁄ 16 79 3 ⁄ 8 8-12 ⁄ 16 - ⁄29 (4 / 16 in) 4 5 x M6 ( 49040060 * 40 All Bronze 14.7 74 13.2:1 2 ⁄ 148 59 ⁄ 173 6 ⁄ 14.379 3 3 ⁄ 74 8-12 2 ⁄ ⁄7716 -⁄ 5 9 5 5 967⁄16 5⁄16 5 5 ⁄168-12 5⁄16 -1⁄2 49046055 46STST ST 2:1 2.4:1 7.6:1 13.9:1 44.8:1 7.215.8:1 15.84 ⁄443⁄487 874.1 121 16 433⁄4 65.7 168 582513 192 7⁄169⁄⁄-16 16 84 53⁄42113315⁄516⁄⁄16 16 8-14 16 910.0 557 1⁄21145.5 49016003* 16ST 4.2:1 All5.1 Chrome 436⁄413 58 (18-12 2in) T016001 Alloy49030003* 15.8:1 2.3 65.7 2:1 2 ⁄16 25.8 121 12.8 ⁄4 -369⁄884 x M6 ⁄48-14 c’sk screws on 94mm 49046059* 46 All Alloy Chrome 15.8:1 2.4:1 7.6:1 13.9:1 44.8:1 22.0 33⁄9.0 ⁄⁄16 168 6⁄516⁄⁄2885⁄1625⁄16121 192 16-1--⁄92⁄⁄16 2:1 13.8:1 29.2:1 74 2 15 16 160.5 ⁄16⁄head 16ST 2:1Chrome 30 3.9 8.6 65.7 121 5 ⁄4 138 8-12 6-10 15 Note: 55⁄⁄16 All models marked with an (*) i.e. 40 Bronze, Steel, All Chrome and All Bronze Winch Finishes order. 49040055 ST Stainless Alloy 5.8:1 13.2:1 40.2:1 4.9⁄16 10.7 74 145.5 16 148 58 5513 ⁄16 173 613⁄16⁄16 16 795 x M6 3(11⁄4⁄⁄588in) 8-125screws 16 --1194mm c’sk head 49040058* 40 ST Stainless Steel 50ST 1.9:1 1.9:1 5.8:1are made to13.2:1 40.2:1 6.4 14.1 74 22 15 ⁄⁄7716 148 173 79 8-12 ⁄⁄9229 5 (413/4 in) PCD 11/58 5⁄16 9⁄16 5⁄on 97⁄16 36⁄455 ⁄9 3⁄4 3 50 ST 9⁄9.7 3⁄4874.1 145.5 5⁄165 121 1⁄21145.5 5 5 5 9 3 3 3 15 11 5 1 49016002* 16 ST All Bronze 2:1 15.8:1 9.0 65.7 2 4 5 2 ⁄ 16 8-12 ⁄ 16 ⁄2 (3 16 in) PCD 49046056 46 ST Chrome 2.4:1 7.6:1 13.9:1 44.8:1 21.3 3 ⁄ 16 168 6 ⁄ 8 192 7 84 3 ⁄ 16 8-14 16 ⁄ 16 016019* 16 ST Bronze 2:1 15.8:1 3.9 8.6 65.7 2 16 121 4 5 ⁄ 4 58 2 8-12 ⁄ 16 49046060* 46 ST All Bronze 2.4:1 7.6:1 13.9:1 44.8:1 10.0 22.0 87 3 ⁄ 16 168 6 ⁄ 8 192 7 ⁄ 16 84 3 ⁄ 16 8-14 ⁄ 16 ⁄ 16 T Chrome 2:1 3.1 4.2:16.8 13.8:1 65.7 29.2:1 2 ⁄16 5.8 121 12.8 4 ⁄4 74 121 ⁄8 49030002* 30ST 15.8:1 16mm Rope 2:1 2 15⁄16 4 4 138 58513 ⁄16 2 ⁄16160.5 6-10 613⁄16 ⁄4 - 69 2 11⁄PCD 16 8-12 55⁄16 -11⁄2 8mm Rope (5 ⁄16") ( 5 ⁄8") 5.8:1 49040056 40 ST 1.9:1 5.8:1 13.2:1 40.2:1 40.2:1 6.5 14.3 74 16 148 5513⁄⁄16 16 173 6613 16 79(3 11/16 in) 8-12 16 -- ⁄⁄22 49040059* 40ST AllChrome Chrome 1.9:1 13.2:1 6.7 14.7 74 22 15⁄⁄716 148 173 ⁄⁄16 79 33 ⁄⁄88 8-12 ⁄⁄16 5⁄285⁄16 9 1⁄2 9⁄16 5 15 7⁄165⁄7 5⁄16 35⁄1669 11⁄16 5⁄168-12 1⁄2 016003* 49046057* 16ST All Chrome 46ST 2:1 49030000 9.0 2:1 65.7 4.2:12 9⁄9.7 16 13.8:1 121 43⁄4874.2 145.5 58 8-12 16 ⁄-16 Bronze 15.8:1 2.4:1 44.8:1 21.3 3 ⁄ 16 53⁄4 168 6 192 84 8-14 30ST 7.6:14.1 Alloy 13.9:1 29.2:1 9.2 74 2 ⁄ 16 138 5 160.5 6 2 ⁄ 16 5 in) c’sk head 5 153⁄16 131⁄8 5 173 138⁄316⁄16 5 3 181 58513 12 490480552:1 48ST ST Alloy 2.6:1 9:16.4 13.2:1 13.9:1 48.6:1 8.8 121 10.7 19.443⁄4 3 93 208 6613 8-14 55⁄⁄516 ⁄16 1-9⁄16 55xxM8 74 22 15 33113⁄⁄883⁄8 8-12 49040057* 6.5 14.3 T Alloy49040055 2.9 5.8:1 65.7 40.2:1 2 9⁄16 4.9 ⁄16 -79 ⁄4 in) c’sk head M6((1⁄16 *All Bronze 40 40 ST 15.8:1 AllBronze Bronze 15.8:11.9:1 1.9:1 5.8:1 40.2:1 14.7 74 145.5 ⁄716⁄8 553⁄⁄44 148 148 58 51575⁄⁄16 16 2 ⁄16 173 8-12 79⁄86 8-12 16 --1⁄⁄229 9⁄16 9 -1⁄2 016002* 49040060 16ST 4.1 13.2:1 9.0 2:1 65.7 4.2:126.7 145.5 8-12 5 7⁄165⁄716⁄16 49046058* 46ST 2:1Stainless Steel 2.4:1 13.9:1 44.8:1 9.413.8:1 121 20.7 312.3 ⁄16 168 6⁄116⁄285⁄16 138192 31 53⁄1669 Winch 8-14 -9⁄16 5⁄16(5-111⁄32/32 in) PCD 49030001 30ST 7.6:1 Chrome 29.2:14 ⁄4875.6 74 2 13 160.5 84 65⁄16 211⁄16 5 55⁄168-12 30 ST9 Two-Speed Self-Tailing Winch ST3⁄16Two-Speed Self-Tailing 40 5⁄8 3 181 15 13 1 3 5 5 1 5 (4 / 4 in) PCD 49048056 48 ST Chrome 2.6:1 9:1 13.9:1 48.6:1 12.1 26.7 93 3 7 ⁄ 8 208 8 ⁄ 16 86 3 ⁄ 8 8-14 ⁄ 16 ⁄ 16 49040056 40 ST 1.9:1 5.8:1 13.2:1 40.2:1 6.5 14.3 74 2 ⁄ 16 148 5 ⁄ 16 173 6 ⁄ 16 79 3 ⁄ 8 8-12 ⁄ 16 ⁄ 2 49040058* Stainless Steel 6.4 121 14.1 4are⁄4 made to145.5 T Chrome 2:1 marked with15.8:1 3.9 Steel,8.6 65.7 2 ⁄16 Winch 5 ⁄ 4 58 2 ⁄ 16 8-12 ⁄ 16 - ⁄2 5 ⁄ 165in) c’sk 5 x M8 ( x M6 (1⁄4head in) c Note: 15 7 11 5 1 All models an (*) i.e. Bronze, Stainless All Chrome and All Bronze Finishes order. 7⁄16 5 9 1 160.5 84 6 ⁄16 35⁄1669 1 8-14 5⁄168-12 5⁄7 30 ST Bronze 13.9:1 29.2:15 7⁄16875.6 160.5 74 69 2 6⁄5162⁄811⁄16 138 ⁄16 -on ⁄2 94mm 7 49046059* 46ST 2:1 49030019* All Chrome 7.6:14.2 44.8:1 22.0 312.3 168 192 -99⁄16 030000 30ST Alloy 4.2:1 13.8:1 2.4:1 29.2:1 9.2 2:1 74 4.2:12 1510.0 ⁄1613.8:1 138 8-12 5 ⁄1613 16 ⁄-16 head screws 53 x M6 ( ⁄4 2in)⁄16c’sk 29/32 5⁄8 6 3⁄16 148 1⁄16 316⁄16⁄25 516 15 13 1 5 1 1 (4 / 16 in) 9 3 5 1 (5 in) PCD 49048057* 48 ST Bronze 2.6:1 9:1 13.9:1 48.6:1 12.1 26.7 93 3 181 7 ⁄ 8 208 8 86 3 ⁄ 8 8-14 ⁄ 16 ⁄ 16 49040057* 40 ST 1.9:1 5.8:1 13.2:1 40.2:1 6.5 14.3 74 2 ⁄ 16 5 173 6 ⁄ 79 3 ⁄ 8 8-12 ⁄ ⁄ 2 49040059* All Chrome 6.7 14.7 4 ⁄4 7 ⁄ 4 in) c’sk PCD head 5 x M6 ( T Bronze 2:1 15.8:1 3.9 8.6 65.7 2 ⁄ 16 121 145.5 5 ⁄ 4 58 2 ⁄ 16 8-12 ⁄ 16 ⁄ 2 15 7 5 11 5 1 11 15 5 11 5 1 30 ST All5.6 Chrome13.9:1 29.2:15 ⁄16875.8 160.5 74 69 2 6⁄5162⁄8 ⁄16 138 2 ⁄16 5⁄168-12 7⁄166 ⁄16 168 5⁄16/69 030001 30ST Chrome 46ST 2:1 49030003* 29.2:1 12.3 2:1 74 4.2:12 10.0 ⁄1613.8:1 138 8-12 5 ⁄16⁄7169⁄-16⁄2160.5 84 6 ⁄16 3(3 16 in) 8-14 PCD 49046060* All 4.2:1 Bronze 13.8:1 2.4:1 7.6:1 44.8:1 22.0 312.8 192 -9⁄16 ⁄16 - ⁄32 5⁄8 3 148 131⁄8 5 173 5 5 16-1-⁄92⁄16 11 3⁄8 c’sk head 49048058* 48STST 15.8:1 Stainless Steel 2.6:1 9:1 13.9:1 48.6:1 11.4121 14.1 25.143⁄4 7 93 208 76⁄1613 8⁄316⁄16 5⁄16 -79 8-14 1⁄86 49040058* 40 1.9:1 5.8:1 13.2:1 40.2:1 74 2 153⁄16 49040060 * All Bronze 6.7 14.7 113mm5⁄16(4-1⁄2/4 in) PCD 15⁄1613.8:1 5⁄16 -1⁄2 160.5 T030019* All Chrome 9.0 65.7 2:1 2 9⁄4.2:1 16 26.4 ⁄4 181 25 x65M6 30 ST All 74 695825157⁄⁄1616 ⁄16 3( ⁄34⁄8in) 69 8-12 211screws ⁄16 ⁄16⁄on 8-12 30ST 2:1Bronze 2:1 49030002* 4.2:1 13.8:1 4.1 29.2:1 5.6Bronze 12.3 74 13829.2:1 5 ⁄16 5.8145.5 160.512.8655⁄16 211⁄216 ⁄161388-12 58-12 7 5 1 3 3 5 5⁄⁄88 (4 /16 in)3133PCD 49048055 48STST ST 2.6:1 5.8:1 9:1 13.9:1 40.2:1 48.6:1 8.8 14.7 19.4 93 181 513771⁄16 208 61388⁄316⁄⁄16 16 86 8-14 5⁄516⁄⁄16 16-1--⁄929⁄⁄16 16 49040059* 40 1.9:1 13.2:1 6.7 74 2 1533⁄16 148 173 7986 ⁄83⁄⁄88 8-12 49048059* 48 All Alloy Chrome 2.6:1 9:1 13.9:1 48.6:1 12.6 27.7 93 181 ⁄⁄88 208 8-14 ST 9 16 34 34 5 16 14 3 8 ST 9 16 34 34 5 16 14 3 8 ST 9 16 34 34 5 16 5 16 1 2 ST 9 16 34 34 5 16 5 16 1 2 ST 9 16 34 34 5 16 5 16 1 2 ST 9 16 34 34 5 16 5 16 1 2 14 11 16 Self-Tailing Winch Specifications Self-Tailing Winch Specifications Self-Tailing Winch Specifications 9 16 34 34 5 16 5 16 1 2 ST 15 16 7 16 5 16 11 16 5 16 1 2 ST 15 16 7 16 5 16 11 16 5 16 1 2 ST 15 16 7 16 5 16 11 16 5 16 1 2 ST 15 16 7 16 5 16 11 16 5 16 1 2 ST 15 16 7 16 5 16 11 16 5 16 1 2 ST 15 16 13 16 13 16 18 5 16 1 2 ST 15 16 13 16 13 16 18 5 16 1 2 ST 15 16 13 16 13 16 18 5 16 1 2 ST 15 16 13 16 13 16 18 5 16 1 2 ST 15 16 13 16 13 16 18 5 16 1 2 ST 15 16 13 16 13 16 18 5 16 1 2 ST ailing Winch Specifications Self-Tailing Winch Specifications 14 11 16 14 7 16 14 34 Cordage, Rigging & Sailboat Hardware r o ELECTRIC CONVERSION KITS FOR OCEAN WINCHES, 1993 TO PRESENT Motor ( att ) ar o700 Y 40S Motor 900 ( att ) Y 45S 50S 55S 65S E SERIES CONVERSION KIT This option is achieved by the simple installation of a power drive unit, motor 40S Winches 1600 Y YY 700 2000 900 1600 YY YY 45S 50S 55S 65S Y 1600 48000116 40 50 12vmonitor M B 70 70/3 80 80/3 48000078 70 80 24v M ( att ) 45S 50S The motor thermal trip40S is connected to 55S Y motor 700 temperature, the which 40S 45S 50S M B 900if the heat builds up to a Ycut out Y 48000117 2000 40 50 24vensures 48000075 50 65 12v M B Y 1600 an unacceptable level, while the Lewmar 700 48000076 M B electric Y 2000 switch can be easily Motor 50 65 24vsafety deck 900 48000077 12vwired. M B 45S Y 1600 ( att ) 70 80 40S 50S art m er 900 48000211 48000212 hes e cription Y 70 70/3 80 80/3 2000 Manual override facility is still available for back up, or as a means of experiencingMotor traditional sailing. e cription ( att ) 40S 45S 50S speed comes Two One as the standard control. It gives 2 speed ontrol o e 24v 68000933 e cription B 700 45S 50S 55S 65S 70 70/3 80 80/3 480403001 EMotor ( att ) 40S 480443001 480483001 Contactor 12 For 40ST Ocean Winches 45S 44ST 50S Ocean 55S Winches 65S 70 70/3 For For 48ST Ocean Winches 80 80/3 80 80/3 Winches Winches Winches Winches Winches Winches Winches Winches 70 80 24v M 45 B ControlYBox 24v 2000 48000084 EL OCEAN ELECTRIC WINCHES 50 Control Box 12v EL Motor 48000093 Lewmar powered winches provide push button control, combined with the features and benefits of the Ocean Self-Tailing 45S 50S powered range is available in sizes 40-111, providing quiet hands free operation on sailboats between 30 and 80 ft. 9m-24m . the Ocean winch and power pack provides a perfect combination of drum speed, power and torque which ensures smooth and 65 Control Box 12v EL efficient sail trimming. 48000094 65 Control Box 24v EL er 48000086 e cription ToBoxstop 50 Control 24v EL) grind ( attthe 40S winch. The 48000089 Box 12v700 EL 12v re Wired55 M Control B 48000090 Box 24v900EL 24v re Wired55 M Control B Combining 2 ontactor o e 70 70 3 Control Box 12vontrol EL 48000178 48000179 WITH E SERIES CONTACTOR 70 70 3 Control Box 24v EL E-Series 65S 70 70/3 EL Contactor, Deck Switch 69000345 and Circuit 48000181 80 80 3 Control Box 24v EL Contactor 12 E EL Breaker Contactor 24 E EL 40AEST 12V Aluminum ST ELContactor Box 12 E 490402551 er 48000180 e cription Includes Deck Motor50S Gearbox, 80 80 3 Control Box 12v EL 40SUnit, 45S 55S cce orie E ec S WITH ELS SERIES LOAD SENSING CONTROL BOX 80 80/3 ontactor Includes Power LS Drive Unit, lectric LoaMotor Gearbox, Deck Sen ing ontrol Bo Switch 69000345, Breaker and ELS Control Box 490482563 49050201 ec S itche 46AEST 12V Aluminum ST 49054200 46AEST 12V Chrome ST 49054201 ingle direction switch. inged cover to prevent 48AEST 12V Aluminum ST 49058200 accidental operation. vailable in 3 finishes — rey, White teelST 48CEST 12V tainless Chrome 49058201 45itche art 45 49065200 Gre m er e cription 50 49065201 68000928 rey witch (Blank) 490402561 40 Control Boxrea 12v ELer ircuit EL40 Control Box 24v EL 490462551 art irc it inch Boxoltage 12v EL 490462561 EL45mControl er Breaker Size 45 Control Box 24v EL 68000349 12 90 40 490482551 50 Control Box 12v EL 68000542 24 40 40 50 Control Box 24v EL 490482561 EL ELContactor Box 24 e e 40CEST 12V Chrome ST 68000350 12 110 55 Control Box 12v EL 68000348 24 50 55 Control Box 24v EL inch 68000239 12 120 65 Control Box 12v EL 68000240 24 70 50 Size 65 Control Box 24v EL 68000970 rey witch ( pen) 68000894 12 200 direction 55 switch. inged ingle cover to prevent inch 70 4070 3 Control24Box 12v EL90 68000349 55 68000930 White witch (Blank) accidental operation. vailable in 3 finishes — rey, 70 70 3 Control Box 24v EL Size 68000894 12 200 65 68000971 White witch ( pen) 40 80 80 3 Control Box 12v EL White tainless teel ingle cover totainless prevent 68000349 24 90 direction 65switch. inged 68000929 teel witch (Blank) 40 4580 3 Control12Box 24vaccidental 80 EL 68000239 120 70 operation. vailable in 3 finishes — rey, 48000100 rand rix witch art 40 45 68000240 24 70 70 White tainless teel ec S itche cce 68000351 45 50 12 t 50 er 68000351 rea 12 9 68000239 12 oltage Breaker 50 55 68000240 24 12 90 68000240 45 50 68000349 55 55 orie 150m 24 24 it irc 2 65 24 40 0 12 65 110 289 480403002 For all 40ST Ocean 480443002 For all 44ST Ocean 480463002 For all 46ST Ocean LS lectric Loa Sen ing ontrol Bo 480483002 For all 48ST Ocean 48050300 For all 50ST Ocean lectricLoa Loa LS LSlectric 48054300 Sen ing ontrol BoFor all 54ST Ocean Sen ing ontrol Bo 48058300 For all 58ST Ocean 48065300 For all 65ST Ocean ontrol oDriveeUnit, Motor Gearbox, Deck Switch 69000345, Includes Power 40S 68000934 Contactor 24 E 40 50 12v M Contactor B YBox 12 700E 18000301 40 50 24v M Contactor B YBox 24 900E 18000302 48000085 Includes Deck Unit, Motor Gearbox, Deck Switch 69000345, Breaker and ELS Control Box. 12v. of the winch handle 1 speed Electric Manual drive through use re Wired M B Drive. Available 900 on Lewmar Winches sizes 40/46/48ST. 12v re Wired M 50 65 12v M 40 B ControlYBox 12v 1600 48000081 EL 50 65 24v M 40 B ControlYBox 24v 2000 48000082 EL 70 80 12v M 45 B ControlYBox 12v 1600 48000083 EL 1 0 B 65S ontactor o e Breaker, Contactor. ontrol 12v. 34ST Winches otor Gear o 40S 480343001 45S 50S For 40S 55S Ocean 65S50S 7055S70/3 65S 80 80/3 art m er e cription 45S 70 70/3 er Lewmar s most popular Electric Range. The ELS Electric Winches are controlled by an Overload Protection Control Box, this allows the winch to be operated up to a high load, equivalent to the SWL Safe Working Load of each winch size. When this Load is reached the winch load can be increased back up to this cut out level. Safety Overload Cut Out function pioneered by Lewmar, and is a unique Lewmar feature. With Lewmar ELS, the control box dictates the speed at which the rope/sheet is recovered. The sheet is recovered rapidly at low load when sheets are slacker, and slows down as load increases. This provides speed when you need it most, and control as you tune your sheets to perfection. Two One speed comes as the standard control. It gives 2 speed Manual drive through use of the winch handle 1 speed Electric Drive. Available on Lewmar winch sizes - 40ST - 65ST. Two Two speed available on Lewmar winch sizes 66ST - 111ST. otor Gear o Y 700 ELS ELECTRIC LOAD SENSING SERIES CONVERSION KIT 70 70/3 80 80/3 and switch gear. The E Electric Winches by a simple single direction are controlled contactor, which can be a stand alone nylon encased unit, or a contactor housed in a waterproofMotor box. 1600 2000 art 2000 m er Motor ( att ) 55 65 24 50 12 120 70 65 70 24 70 563 70 er art 70 150 m er 68000928 90inch 68000970 68000928 120 Size 68000930 70 40 68000970 68000971 40 68000930 45 68000929 45 68000971 50 48000100 68000929 50 80 80 90 48AEST 12V Aluminum ST 50CESTontactor 12V Chrome ST 54AEST 12V Aluminum ST ontactor 54CEST 12V Chrome ST 58AEST 12V Aluminum ST 58CEST 12V Chrome ST S65AEST itch (Open) 12V hite S itch Aluminum ST(Blank) 65CEST 12V Chrome ST ontactor Gre S itch (Open) hite S itch (Blank) e cription rey witch (Blank) ec S itche e cription Stainle Steel Gre S itch (Open) S itch rey witch ( pen) rey witch (Blank) White witch (Blank) 110ingle direction switch. inged cover to prevent rey witch ( pen) accidental operation. vailable in 3 finishes — rey, White witch ( pen) White White tainless witch teel (Blank) tainless teel witch (Blank) art Gre S itch (Open) White witch (w pen) w w. l e w m a r. c o m m er e cription rand rix witch tainless teel witch (Blank) 68000928 rey witch (Blank) Gran ri hite S Stainle itch (Blank) Soli itch teel 90 110 hite S itch (Blank) 69000350 69000351 69000345 Open lid switch with light Closed lid switch with light Open lid switch 564 Cordage, Rigging & Sailboat Hardware Winch andle Lewmar winch handles use ball bearings for maximum efficiency. The ower rip winch handle makes initial fast cranking with one hand both easy and comfortable. When the load comes on and Standard it s time to shift gears, you Power grip 2914 1011 2914 1110 2914 1111 2914 0121 can use your second hand to grip the main shaft handle and do some serious grinding. Titan winch handles are made of the finest quality materials and created using the latest ONETOUCH WINCH HANDLES computer aided designs. are to winch The new Lewmar OneTouch Winch Handle is aTitan newhandles approach engineered to withstand the rigours of the handle design. Its patented OneTouch’ mechanism allows you to squeeze the release button which runs the entire length saltwater environment year after year.of the handle and pull to unlock in one quick, easy motion. To lock-in, simply squeeze and insert into winch, so you spend less time fiddling around and more time sailing. 29140040 29140042 29140044 29140046 8 locking alloy Standard grip 8 locking alloy Power grip WINCH HANDLES 10 locking alloy Standard grip Each handle in Lewmar’s extensive range uses ball bearings for maximum efficiency. PowerGrip makes initial fast cranking with one hand both easy and comfortable, and when the load comes on and it’s time to shift gear, you can use your second hand to grip the main shaft handle and do some serious grinding. 29141011 8 Alloy, Locking Single grip 29141110 10 Alloy forged 2914 0036 10 Alloy, Locking Single grip forged 2914 5301 29141111 29141121 10 Chrome, Locking forged 29140121 10 Chrome, Locking Power Grip forged 10 locking alloy Power grip TITAN PRIMARY SERIES WINCH HANDLES The Primary series winchehandles been carefully for arhave Winch andle designed S eci ication the day sailor with simple art but effective features to keep costs down. Size The Titan Primary series ismthe s biggest selling range. All er worldmm in e cription WINCH HANDLE POCKET Primary Series are manufactured from high8grade injection moulded 2914 1011 200 lloy Lock in Winch andle UV stabilized PVC holds any size handle and glass nylon. The handle is made in two sections then ultrasonically weighs only 300 grams. Pre drilled mounting holes. 250 10 lloy Winch andle ( orged) 2914 1110 welded creating a box section designed for strength and stiffness. If 250 to 10 lloy Winch andle, Lock in ( orged) 2914and 1111is easy one goes overboard it floats see. 29140020 29145301 29145311 2914 0121 8 locking, red 10 locking, red o 250 10 o ite Winch art m er Chrome Winch andle, Lock in ower rip ( orged) andle S eci ication Size mm in e cription TITAN CONDOR WINCH HANDLE 2914 5301 200 8 Titan Winch andle, Red, Locking 200racers 8 or Lite Touch Winch andle, ower rip Specifically developed for2914 the0032 serious HH-3 WINCH HANDLE 250 10 cast Titan Winch andle, Red, Locking 2914from 5311 lightweight large cruising yachts. Made For large winch handles, aluminum, heat treated for maximum strength 250 10 andLite Touch Winch andle, ower rip 2914 0036 top action, standard or ratchet. rigidity. The Condor is the perfect winch handle for HH3 any club or grand prix racer. Its unique rubber over mould will protect your yacht if its dropped. 29147512 Winch HOLDER andle oc et 10 locking Maxi grip, blue art m er 2914 0020 e cription 2914 0020 Winch andle ocket LOCKING WINCH HANDLE W Die Cast Aluminum 604200 TM TEAK WINCH PADS SFT60164 SFT60166 Small, 4-3/4” Dia. x 1-1/4” H Large, 6-3/8” Dia. x 1-1/4” H a S 71 Cordage, Rigging & Sailboat Hardware 19701000 Grease — 100g Know your Winch 19701500 Winch Maintenance Pack 1 2 3 5 Crown kits 19701100 Grease — 300g 8 winch to 11 12 13 13 d, thoroughly 11 Winch Service 14 14 18 17 15 16 15 17 18 w w w. l e w m a r. c o m dry with a cloth. o remove dirt spots. ith a cloth. DO NOT r and dry with a onally to remove bath during the h, use half of an h soaked in paraffin y be damaged by s directions before awls sticking in light engine oil. racks, gear teeth collect in Winch Servicing Kit – 4 Circlips, 8 Pawls, 12 Pawl Springs, 3 key 2 pan head screws (Self tailers) 19700300 Three speed winch servicing kit 19700401 Standard Large Pawls & Springs. (50-65) 6 pawls, 12 pawl sprin 19 19 1. Top Cap 11. Roller bearing assembly 2. Feeder arm 12. Drum washer 3. Collet 13. Gear spindle sleeve 4. Upper crown 14. Pawl gear 5. Stripper ring 15. Gear spindle 6. Lower crown 16. Centre stem 7. Spring 17. Pawl spring 8. Spring cup 18. Pawl 9. Main spindle 19. Ratchet gear 10. Drum 19700501 Standard Small Pawls & Springs (5-48/66) 6 pawls, 12 pawl spr 19701000 GearGrease – 100g tube, waterproof grease for many applicatio 19701100 GearGrease – 300g tub 19701600 RaceLube – 55ml, for applications where grease is not advised 19701500 Winch Maintenance Packs – 100g greasegear, 55ml racelube, brush, “How to” Booklet, 10 pawl springs. 19701600 Race Lube — 55ml 48000447 Size 14, 16 48000448 Size 28, 30 Winch Spares Kit Available from48000449 Top Cap to Pawl Gear Kit.Size 34, 40 Contact your local Lewmar supplier or 48000450 Size 44, 46 go to www.lewmar.com 48000451 Size 48 48000452 Size 50, 54 48000453 Size 58 10 9 sailing season Basic Kit – 4 Circlips, 4 Pawls, 4 Pawl Springs 19700200 Servicing manualsscrews, are also availablesprings for all Lewmar winches. All manuals are include upper and lower crowns, stripper ring, downloadable from www.lewmar.com and spring cups for one winch. 6 7 Description 19700100 SELF TAILING WINCH PARTS 1992 AND UP 4 ired to carry ect assembly and r boat. Part Number 565 Feeder arms, chrome 48000478 Size 14, 16 48000480 Size 30 Drum Bearing Kit 48000482 Size 40 48000483 Size 44 48000484 Size 46 48000485 Size 48 48000486 Size 50 48000487 Size 54 48000488 Size 58 45000489 Size 64 Jaw Kit Pawl Gear Kit WINCH SERVICING | WINCH SPARES & MAINTENANCE Top caps, chrome screw on with O ring 48000443 Size 14, 16 48000444 Size 28, 30, 34, 40, 44, 48, 50, 54 48000445 Size 58, 62, 64, 65, 66 Winch Spares and Maintenance Winch Kits Spares and Maintenance Kits Ratchet Gears – Pawl Engagement When assembling ratchet gears, check pawl engagement as shown below. Incorrect assembly will lead to back winding of the winch. This is very dangerous, so extreme care should be taken. WINCH SPARES 19700100 Spares kit for winch sizes 5-44 19700200 Spares kit for winch sizes 14ST-66ST 19700100 19700200 19700300 Spares kit for 3 speed winch Spares Kit 5-44 Spares Kit supplied with every 14ST-66ST self-draining and 19700401 Springs for winch sizes 50-64 ted. 3Correctand large pawls ✗Wrong 19700501 Springs and small pawls for winch sizes 5-48 and 52-66 19701000 Grease, 100g tube 19701100 Grease, 10.5oz jar w w w. l e w m a r. c o m 19701500 Winch maintenance pack includes grease, race lube 55ml , rder of dismantling. ectly. 19701600 1260/7 1260/8 BT00209 BT00330 48000446 B2075 19700100 19700200 Spares Kit 5-44 19700401 Spares Kit 19700300 Spares Kit 44-66PB STD Large Pawls & 14ST-66ST Springs 50–65 Winch Spares and Maintenance Kits pawl springs ten , lubricating brush, Winch Service manual Race lube, 55ml 19701000 Grease — 100g Pawl spring for Lewmar winches Pawl for Lewmar winches Pawl spring for Barient/Barlow Collets 2 for self tailing winches size 16-68 Part Number 19701000 Grease — 100g 19700100 Spares Kit 5-44 Circlip holds drum on non self tailing winches Three speed winch servicing kit 19700401 19700200 19700300 Standard Large Pawls & Springs. (50-65) 6 pawls, 12 pawl springs 19700501 Standard Small Pawls & Springs (5-48/66) 6 pawls, 12 pawl springs 14ST-66ST 19701000 GearGrease – 100g tube, waterproof grease for many applications 19701100 GearGrease – 300g tub 19701600 RaceLube – 55ml, for applications where grease is not advised Spares Kit 44-66PB 19701100 19701600 300g Race Lube 19701500 Grease Winch—Maintenance Packs – 100g greasegear, 55ml—racelube, 55ml 19701100 Grease — 300g 19701600 Race Lube — 55ml 19700200 19700300 19700401 19700300 Spares Kit Part Number 19700100 Description 19701500 19700100 Basic Kit – 4 Circlips, 4 Pawls, 4 Pawl Springs Winch Maintenance PackServicing Kit – 4 Circlips, 8 Pawls, 12 Pawl Springs, 3 keys, 19700200 Winch 2 pan head screws (Self tailers) 19701500 Winch Maintenance Pack Pawl for Barient/Barlow 19700300 Spares Kit 44-66PB 19700501 STD Small Pawls & Springs 5-48 & 66 brush, “How to” Booklet, 10 pawl springs. Servicing manuals are also available for all Lewmar winches. All manuals are downloadable from www.lewmar.com 19700501 197 STD Lar 19701000 Sprin 19701100 19701600 19701500 Servicing man downloadable 566 Cordage, Rigging & Sailboat Hardware SYNCHRO BLOCKS Lewmar s Synchro range is the result of a complete re-think of block design. The new range transforms performance levels in terms of speed, efficiency and handling. Scientifically optimised block geometry, a revolutionary Free-Spin self lubricating bearing adjustable cam and a self-aligning head combine to reduce friction and improve efficiency levels by up to 40 over a conventional mainsheet system. The result is that each component is synchronised with the movement of the rope-providing an easier, smoother transfer of power from deck to sail-and all with less wear on the rope. Cheeks are composite on the 50-90 mm blocks. 105 mm cheeks are aluminum. Description 29925001 29925002 29925003 29925004 29925005 29925009 29925010 29925021 29925031 29925034 29925037 29925039 29926001 29926002 29926003 29926004 29926005 29926006 29926010 29926021 29926029 29926031 29926034 29926037 29926039 29927201 29927202 29927203 29927204 29927205 29927210 29927221 29927231 29927234 29927237 29927239 29929001 29929002 29929003 29929004 29929021 29929031 29929034 29929039 29921051 29921054 29921050 29921052 29921055 Safe Work Optimum Load Line Size Maximum Line Size kg lbs mm in mm in 50mm single 450 990 6 1/4 10 3/8 50mm double 450 990 6 1/4 10 3/8 50mm triple 450 990 6 1/4 10 3/8 50mm single bkt 450 990 6 1/4 10 3/8 50mm double bkt 450 990 6 1/4 10 3/8 50mm single bkt cam 450 990 6 1/4 10 3/8 50mm triple bkt cam 450 990 6 1/4 10 3/8 50mm toggle head 450 990 6 1/4 10 3/8 50mm fiddle 450 990 6 1/4 10 3/8 50mm fiddle bkt 450 990 6 1/4 10 3/8 50mm fiddle cam 450 990 6 1/4 10 3/8 50mm fiddle bkt cam 450 990 6 1/4 10 3/8 60mm single 800 1760 8 5/16 10 3/8 60mm double 800 1760 8 5/16 10 3/8 60mm triple 800 1760 8 5/16 10 3/8 60mm single bkt 800 1760 8 5/16 10 3/8 60mm double bkt 800 1760 8 5/16 10 3/8 60mm triple bkt 800 1760 8 5/16 10 3/8 60mm triple bkt cam 800 1760 8 5/16 10 3/8 60mm toggle head 800 1760 8 5/16 10 3/8 60mm single alu. shv 800 1760 8 5/16 10 3/8 60mm fiddle 800 1760 8 5/16 10 3/8 60mm fiddle bkt 800 1760 8 5/16 10 3/8 60mm fiddle cam 800 1760 8 5/16 10 3/8 60mm fiddle bkt cam 800 1760 8 5/16 10 3/8 72mm single 1100 2420 10 3/8 12 1/2 72mm double 1100 2420 10 3/8 12 1/2 72mm triple 1100 2420 10 3/8 12 1/2 72mm single bkt 1100 2420 10 3/8 12 1/2 72mm double bkt 1100 2420 10 3/8 12 1/2 72mm triple bkt cam 1100 2420 10 3/8 12 1/2 72mm toggle head 1100 2420 10 3/8 12 1/2 72mm fiddle 1100 2420 10 3/8 12 1/2 72mm fiddle bkt 1100 2420 10 3/8 12 1/2 72mm fiddle cam 1100 2420 10 3/8 12 1/2 72mm fiddle bkt cam 1100 2420 10 3/8 12 1/2 90mm single 2000 4400 12 1/2 14 9/16 90mm double 2000 4400 12 1/2 14 9/16 90mm triple 2000 4400 12 1/2 14 9/16 90mm single bkt 2000 4400 12 1/2 14 9/16 90mm toggle head 2000 4400 12 1/2 14 9/16 90mm fiddle 2000 4400 12 1/2 14 9/16 90mm fiddle bkt 2000 4400 12 1/2 14 9/16 90mm fiddle bkt cam 2000 4400 12 1/2 12 9/16 105mm single 3500 7700 14 9/16 16 5/8 105mm single bkt 3500 7700 14 9/16 16 5/8 105mm single stand up 3500 7700 14 9/16 16 5/8 105mm fiddle 3500 7700 14 9/16 16 5/8 105mm fiddle bkt 3500 7700 14 9/16 16 5/8 Single Single Bkt Single Bkt Cam Single Toggle Head Fiddle Bkt Cam Fiddle Cam Double Double & Bkt Triple Triple Bkt Cam Fiddle Fiddle Bkt Cordage, Rigging & Sailboat Hardware 567 CONTROL BLOCKS 30MM / 40MM / 60MM Ultimate handling and weight advantage. Lewmar s new high performance Synchro Control Blocks are extremely lightweight with unprecedented load bearing capability. The sheave uses MRT Metal Replacement Technology which, combined with the stainless steel central race and balls, deliver the ultimate efficiency and weight advantage. Cheeks use Long Fibre Technology giving exceptional strength and durability. The clever, open design facilitates easy flushing of sand and salt, for smooth running and simple maintenance. Note cleats are designed to hold only the load that can be applied manually. Description Safe Work Load kg lb single 200 440 double 300 660 triple 500 1100 single, becket 200 440 double, becket 300 660 triple, becket 500 1100 triple cam 250 550 triple, becket & cam 300 660 single stand up 200 440 single fixed head 200 440 fixed head, becket 200 440 through deck single 200 440 through deck tandem 200 440 vertical lead block 200 440 pivoting exit block 200 440 30MM BLOCKS Max Line Size 8mm or 5/16 29901321 29901322 29901323 29901324 29901325 29901326 29901328 29901330 29901320 29901341 29901314 29901361 29901362 29901363 29901365 40MM BLOCKS Max line size 10mm or 3/8 29901421 29901424 29901447 29901441 29901420 29901428 29901422 29901425 29901423 29901426 29901429 29901430 29901463 single 240 528 single, becket 240 528 single, web 240 528 single, fixed head 240 528 single, stand up 240 528 single, becket,cam 240 528 double 480 1056 double, becket 480 1056 triple 720 1584 triple, becket 720 1584 triple, cam 720 1584 triple, becket,cam 720 1584 single vertical lead 240 528 60MM BLOCKS 29901651 29901652 29901653 29901654 29901655 29901656 29901659 29901660 29901677 Max Line Size 12mm or 1/2 single 400 882 double 750 1653 triple 1000 2204 single, becket 400 882 double, becket 750 1653 triple, becket 1000 2204 single, becket,cam 400 882 triple, becket, cam 1000 2204 single web 400 882 60MM RATCHET BLOCKS 29901661 29901665 29901667 29901668 29901670 Single Swivel Head Stand Up Single 400 882 single ratchet & becket 400 882 single ratchet & cam 400 882 triple ratchet & cam 1000 2204 triple ratchet becket & cam 1000 2204 Single Fixed Head Pivoting Exit Block 40 mm Single Becket & Cam Max Line Size 12mm or 1/2 single ratchet Double & Becket Double 30 mm Triple & Becket with Cam Web Block Vertical Lead Block Through Deck Tandem 60 mm Single Ratchet & Becket 60 mm Single Ratchet & Cam 60 mm Triple Ratchet & Becket & Cam 568 Cordage, Rigging & Sailboat Hardware loc NEW Years of design and manufacturing experience, combined with collaboration with boat builders, 2011 designers, and sailors, has resulted in the new Lewmar T ardware Range. Drawing upon the design of the racing range, the T blocks are constructed from minimal alloy parts, providing enhanced reliability. eature lloy cheeks igh Load capacity and large line size ide thrust ball bearings ead design from Lewmar racing range with swivel head locking mechanism through a grub screw S eci cation art m er Size Safe orking Loa kg l e cription Breaking Loa kg l Ma Line Size mm in 29195001 50 ingle 800 1760 1600 3520 10 29195002 50 Double 800 1760 1600 3520 10 29195003 50 Triple 800 1760 1600 3520 10 29195004 50 ingle Becket 800 1760 1600 3520 10 29195005 0 Double Becket 00 0 1 00 20 10 29195031 50 ingle iddle 800 1760 1600 3520 8 1 29195034 0 ingle iddle Becket 800 1760 1600 3520 8 29196001 60 ingle 1100 2425 2200 4850 12 12 29196002 60 Double 1100 2425 2200 4850 12 12 29196003 60 Triple 1100 2425 2200 4850 12 12 29196004 60 ingle Becket 1100 2425 2200 4850 12 12 29196005 60 Double Becket 1100 2425 2200 4850 12 12 29196031 60 ingle iddle 1100 2425 2200 4850 10 29196034 60 ingle iddle Becket 1100 2425 2200 4850 10 29197201 72 ingle 2000 4400 4000 8800 14 1 29197202 72 Double 2000 4400 4000 8800 14 1 29197204 72 ingle Becket 2000 4400 4000 8800 14 1 29197231 72 ingle iddle 2000 4400 4000 8800 12 12 12 29197234 72 ingle iddle Becket 2000 4400 4000 8800 12 29199001 90 ingle 3500 7700 7000 15400 16 29199004 90 ingle Becket 3500 7700 7000 15400 16 29199050 90 ingle tand p 3500 7700 7000 15400 16 A itional nformation ost Diameter hackle in Diameter mm Size 50 in 9.4 11.9 5 its Traveller pstand Size 60 mm in 1 6 z1 TR 1 1 Size 72 mm in 2 16.5 21 2 9.8 z2 TR z TR 19811000 19821000 29393000 its nap hackle 2 2 2 2 2 0 4.62 200 7.05 440 15.52 800 28.22 Size 90 mm 2 0 0 in 19.75 na ad Eye 29904050 a eight oz 131 10 its Block pstand 2 0 0 g Cordage, Rigging & Sailboat Hardware 569 RACING BLOCKS The 60mm high load, 80mm and fiddle blocks feature monocoque construction. They offer the best strength-to-weight ratio by incorporating the head block and bearing surface into the cheeks. Racing blocks all have Alloy cheeks. Low load sheaves are composite. High load and ratcheting sheaves are alloy. 60 mm and 80 mm sheaves run on dual Delrin ball races. 80 mm highload sheaves run on Torlon rollers with dual Delrin ball side thrust races. Extensive range 3 in 1 head Torlon rollers Delrin thrust balls Adjustable cams Description 29901611 29901612 29901613 29901614 29901615 29901600 29901647 29901624 29901631 29926040 29941801 29901802 29901805 29901811 29901812 29901813 29901814 29901815 29901821 29901825 29901828 29901839 29927240 Sheave Safe Working Max Line Diameter Load Size mm in kg lb mm in 60 high load,single 60 2-3/8 800 1763 12 1/2 60 high load,double 60 2-3/8 1440 3175 12 1/2 60 high load,triple 60 2-3/8 2000 4409 12 1/2 60 high load,single,bkt 60 2-3/8 800 1763 12 1/2 60 high load,double,bkt 60 2-3/8 1440 3174 12 1/2 60 high load,stand up 60 2-3/8 800 1763 12 1/2 60 high load single, web 60 2-3/8 1400 3086 12 1/2 60 fiddle,ratchet,bkt,cam 60 2-3/8 400 882 10 3/8 60 fiddle block 60 2-3/8 400 882 10 3/8 Single Ratchet 80 mm Snap shackle adapter for 60mm blocks 80 high load,single 80 3-1/8 1800 3968 14 9/16 80 high load,double 80 3-1/8 3240 7142 14 9/16 80 high load,double,bkt 80 3-1/8 3240 7142 14 9/16 80 single 80 3-1/8 1000 2204 12 1/2 80 double 80 3-1/8 1800 3968 12 1/2 80 triple 80 3-1/8 2200 4849 12 1/2 80 single,bkt 80 3-1/8 1000 2204 12 1/2 80 double,bkt 80 3-1/8 1800 3968 12 1/2 80 single,ratchet 80 3-1/8 800 1764 12 1/2 80 single,ratchet,bkt 80 3-1/8 800 1764 12 1/2 80 triple,ratchet,cam 80 3-1/8 2200 4849 12 1/2 80 fiddle,bkt,cam 80 3-1/8 1000 2204 12 1/2 Single Double & Becket Snap shackle adapter for 80mm blocks Single w/Snap Shackle 80mm Web Block Triple Ratchet & Becket & Cam 570 Cordage, Rigging & Sailboat Hardware SNAP SHACKLE ADAPTER The innovative design of the Snap Shackle Adapter combines the convenience of conventional snap shackles with the mobility of traditional screw pin D-shackles, increasing the choice and versatility of deck mounted blocks on any performance sailing boat or cruiser. All will fit both the Ocean and Synchro block ranges as well as similar blocks made by other manufacturers. SNATCH BLOCKS For general spinnaker use. Snatch blocks feature soft synthetic rubber cheeks to handle rough treatment and protect the block. Now fitted with Synchro Snap Shackle adapter. 19810600 19820600 19830500 Safe Working Load Line Size Size kg lb mm in 1 1135 2500 14 9/16 2 1590 3500 16 5/8 3 2155 4750 16 5/8 29925040 29926040 29927240 29929040 Size Description Safe Work Load kg lb 50 Synchro snap shackle 450 990 60 Synchro snap shackle 800 1760 72 Synchro snap shackle 1100 2420 90 Synchro snap shackle 2000 4400 FORGED D SHACKLES SYNCHRO BLOCK UPSTANDS 29904046 29904050 19811000 19821000 29393000 19500100 19500200 19500400 Ocean Size Synchro Safe Work Load Size kg lb 1 60 775 1700 2 72 1130 2500 3180 7080 4 Safe Work Load Size kg lb 30 & 40mm Control 400 990 60mm Control / Synchro 400 990 60/72mm Control / Synchro / Fiddles 800 1760 80mm low-load Racing / Fiddles 60mm low-load Singles 1100 2420 90mm Synchro 2000 4400 BLOCK BEARING - DELRIN BALLS Per 100 PAD EYE - HALYARD Safe Work Load 29904060 29904053 Size kg lb 60/80 3200 7055 105 5000 11023 Size 29175022 29170022 0 29171022 1 29172022 2 Where Diameter Used mm in 60HL Blocks 3.2 1/8 60LL 80LL 105 4.6 3/16 130 blocks/foot blocks 80LL 105 155 6.4 1/4 175 blocks/foot blocks 225 250 blocks 7.8 5/16 SZ2 MS/G cars Cordage, Rigging & Sailboat Hardware 571 OCEAN ORGANISERS Flush fixings. Bushed sheaves prevent over tightening of sheaves when fastening. Can be double stacked. Wide rope angle entry. Tough interchangeable acetal or alloy sheaves. LINE ORGANISERS Racing organisers run on impregnated composite bearings and dual delrin ball side thrust races. Synchro 60 mm organisers run on Synchro Freespin races. All organisers have space to pass two lines between each sheave. 29139102 Ocean 40mm 2 sheave 29139104 Ocean 40mm 4 sheave 29139114 Ocean 60mm 4 sheave 29139112 Ocean 60mm 2 sheave 29906453 Racing 40 mm 3 sheave 29906654 Racing 60 mm 4 sheave Safe Work Description Size Load Max Line Size Length kg lbs mm in in 29916042 29916060 Synchro 6 sheave double 60 3700 8156 12 1/2 10-1/16 Synchro 3 sheave 60 2550 5500 12 1/2 10-1/16 29139102 29139103 29139104 29906453 29906654 29139112 29139113 29139114 29139115 29139116 Ocean 2 sheave 40 1005 2215 16 5/8 4-7/8 Ocean 3 sheave 40 1507 3322 16 5/8 6-3/4 Ocean 4 sheave 40 2010 4431 16 5/8 8-1/2 Racing 3 sheave 40 625 1378 10 5/16 8-1/8 Racing 4 sheave 60 3600 7935 14 9/16 14-1/8 Ocean 2 sheave 60 2400 5290 14 9/16 9-1/8 Ocean 3 sheave 60 3000 6613 14 9/16 12 Ocean 4 sheave 60 3600 7935 14 9/16 14-3/4 Ocean 5 sheave 60 4200 9258 14 9/16 17-5/8 Ocean 6 sheave 60 4800 10580 14 9/16 20-1/2 29916042 Synchro 6 sheave double 572 Cordage, Rigging & Sailboat Hardware SYNCHRO FOOTBLOCKS Synchro footblocks feature alloy cheeks, fixing isolators and moulded base plate to prevent sealant ingress into the sheave. Available in standard and jamming formats and can be stacked to form a double footblock. The smaller 40 mm foot blocks come with a SS base plate and can be used as miniature organisers or deflectors for lines being returned to the cockpit. Safe Working Description 29924061 29924062 29926061 29926064 29927261 29927264 29929061 29929064 Max Load Line Size Length kg lb mm in in 40 Control line Footblock 750 1653 10 3/8 2-15/32 40 Double Control line Footblock 750 1653 10 3/8 2-15/32 60 Synchro Footblock 800 1764 10 3/8 3-27/32 60 Synchro Jamming Footblock 800 1764 10 3/8 3-27/32 72 Synchro Footblock 1200 2645 12 1/2 4-21/64 72 Synchro Jamming Footblock 1200 2645 12 1/2 4-21/64 90 Synchro Footblock 2000 4409 14 9/16 5-17/64 90 Synchro Jamming Footblock 2000 4409 14 9/16 5-17/64 Footblock single 72 Synchro Footblock SYNCHRO CONTROL FOOTBLOCKS Footblock ratcheting 80 mm Sheaves run on dual ball bearing races. Friction cams will hold up to 300kg 600lb max. Safe Working Description 29901360 29901460 29906601 29906602 29906604 29906621 29906622 Load Max Line Size Length kg lb mm in in 30 single 200 440 8 5/16 2 40 single 240 528 10 3/8 2-5/8 60 single 400 882 12 7/16 3-3/8 60 double 400 882 12 7/16 3-3/8 60 single jamming left hand 400 882 12 7/16 3-3/4 60 left hand anti-clockwise ratchet 1400 3086 12 7/16 3-3/8 60 right hand clockwise ratchet 1400 3086 12 7/16 3-3/8 Synchro control 40 mm Synchro control jamming 60 mm RACING FOOTBLOCKS Sheaves run on delrin balls or torlon rollers dependent on load. Composite sheaves on low load footblocks, alloy sheaves on high load footlocks, friction cams on low load, spring cams on high load. Jammer holding load 300 kg/660 lb maximum. Safe working loads are quoted for the whole assembly, the upper sheaves should not be loaded beyond 60 of the safe working load. Safe Working Description 29906611 29946801 29906811 29906812 29906814 29906816 Load Max Line Size Length kg lb mm in in 60 high load single 1400 3000 12 1/2 3-11/32 80 high load single 2400 5290 14 9/16 4-3/8 80 single 1000 2204 14 9/16 4-3/8 80 double 1000 2204 14 9/16 4-3/8 80 single jamming left hand 1000 2204 14 9/16 4-3/4 80 single jamming right hand 1000 2204 14 9/16 4-3/4 Synchro control ratchet 60 mm 72 Synchro Jamming Footblock 50 • ardware 573 Cordage, Rigging & Sailboat Hardware Genoa rac ar SINGLE SHEAVE PULLEY Nickel plated brassstandard sheave. Fixed eye ll Lewmar Track cars fit thewith industry Rope or in three 32mm (1 1 4 ). The cars are available Cord Dia. styles and cover three different loading 0174-12 5/32 levels to suit boats from 9m (30ft) up to 15.5m 0174-34 3/16 (50ft). 0174-1 0174-114 eature 0174-112 recision Workmanship 0174-2 Three tyles 1/4 Genoa T-Track Cars 5/16 All Lewmar Track cars fit the industry standard 5/16 to suit boats from 9m (30ft) up to 15.5m (50ft). OCEAN T-TRACK GENOA CARS Genoa T-Track Genoa T-Track Cars 3/16 All Lewmar Track cars fit the industry standard 29042700 29172 2015 Genoa car w/plunger 2917 2015 29172117 2 Slider with Shackle and Plunger 32mm (1 1/4"). The cars are available in three 1/4 styles and cover three different loading levels 5/16 to suit boats from 9m (30ft) up to 15.5m (50ft). 2917 2016 Features 1500 2917 2016 1500 3300 Safe rac acce orieWorkmanship S eci ication • Precision Working Load Genoa ar Features Size art 2904 1700 m er 1 2904 2904 2700 1700 2 SINGLE SHEAVE PULLEY, SWIVEL EYE Three Styles 2904 2704 2 2904 2705 2 2917 2117 2 2904 2700 2904 2704 Description kg • Three Styles SS1Stirrup, plunger car lunger Car • Simple to fit Control Line Sheave Car 2 tainless teel tirrup, plunger car • Low Maintenance Tri-Roller Genoa Car 2 Control Line heave Car Plunger Size Car e cription 900 1500 Slider with Shackle and Plunger 2904 2705 2 CAR Tri Roller T-TRACK enoa Car 2904 3702 3 SS Stirrup, Plunger Car 2904 2700 2917 2117 2 lider with hackle and lunger2904 2705 3 tainless teel tirrup, lunger Car 2917 2015 Control Line End Stop 2917 2016 Track End Stop 2904 3702 2917 2015 Control Line End Size 2917 2016 2904 2700 3300 Genoa Cars & T-Track Accessories — Specifications Part Number • Precision Workmanship • Nickel plated with brass sheave. Simple to fit Rope or • • Cord Dia. Low Maintenance 2904 1700 0173-12 5/32 0173-34 3/16 0173-1 1/4 2904 1700 0173-114 5/16 0173-112 5/16 0173-2 7/16 2917 2015 Cars Cars fit standard 32 mm 1-1/4 T-Track. T-Track cars are available in 3 styles and cover 3 different loading levels to suit boats from 9m/30ft up to 15.5m / 50 ft. All Lewmar Track cars fit the industry standard Safe Work Load 32mm (1 1/4"). The cars are available in three Size kg lb styles and cover three different loading levels 29041700 1 Genoa car w/plunger to suit boats from 9m 900 (30ft) up1980 to 15.5m (50ft). • Precision Workmanship • Three Styles DOUBLE SHEAVE PULLEY • Simple to fit Nickel plated with brass sheave. Fixed Low eyeMaintenance • Rope or Cord Dia. 0176-34 0176-1 0176-112 2904 2700 2904 2700 styles and cover three different loading levels Features Hardware Low Maintenance Hardware 2904 1700 2904 1700 32mm (1 1/4"). The cars are available in three 7/16 imple to fit Hardware Additional Information Track End top 29042704 2 154 29442705 Genoa car control line sheave 32mm T-Track is a universal track widely 1500 l orking Loa 1980 kg 1800 396 lb 1500 3300 900 3000 1980 660 3300 3000 660 1500 3300 3000 1500 3300 3000 2350 5170 4700 103 Safe Work Load kg lb top Breaking Load Safe kg lb - 1500 3300 1500 3300 1500 3300 1500 3300 2350 5170 - 660 660 - - 3300 w. e w m3300 a r. c o m accepted and used onw manyw boats up to l 1500 Tri roller genoa car 2904 2705 2 50ft. For details see p.143 150 w w w. l e w m a r. c additional n or ation 2917 2016 32mm T Track is a universal track widely Genoa Cars & T-Track Accessories — Specifications Part Number accepted and used on many boats up to Safe Working Load DOUBLE SHEAVE PULLEY, SWIVEL EYE Nickel plated with brass sheave. 2917 2015 0178-34 0178-1 Genoa ar art m er 2904 1700 2904 2700 2904 2704 2904 2705 2917 2117 2904 3702 2917 2015 2917 2016 Size Description 2904 1700 1 Plunger Car 900 kg mm Width in mm Weight lb in g 1980 1800 3960 111 4 3/8 56 2 1/4 540 19.1 oz 25.3 2904 2700 2 SS Stirrup, plunger car 1500 3300 3000 6600 120 4 11/16 56 2 1/4 719 2904 2704 2 Control Line Sheave Car 1500 3300 3000 6600 128 5 56 2 1/4 719 25.3 2904 2705 2 Tri-Roller Genoa Car 1500 3300 3000 6600 147 5 3/4 64 2 1/2 767 27.1 2917 2117 2 Slider 2904 1700with Shackle and Plunger 29041500 27003300 3000 6600 120 4 11/16 56 2 1/4 480 17 3/16 2904 3702 3 4700 10340 170 6 3/4 56 2 1/4 1199 47.3 2904 1700 1/4 rac acce 2917 2016 SS Stirrup, Plunger Car 2350 5170 2917 2015 Control Line End Stop - - - - - - - - 120 4.2 2917 2016 Track End Stop - - - - - - - - 19 0.7 154 orie S eci ication Safe orking Loa Breaking Loa kg lb kg lb 1 lunger Car 900 1980 1800 3960 Keystone tainless teel tirrup, plunger car STEEL SNATCH BLOCKS 2 Control Line heave Car Reasonably priced. Extraordinarily strong. Cast2917 2015 2 Tri Roller enoa roller Car bearing movement. steel construction, Single andwith double sheaves. Galvanized for rust 2 lider hackle and lunger protection. tainless teel tirrup, lunger Car Control Line End top SGLBLK3 Single 3 Track End top SGLBLK4 Single 4 SGLBLK5 Single 5 SGLBLK6 Single 6 111 Number 1000 lb. Size Description 2904 1700 1 Plunger Car 2904 2700 2 SS Stirrup, plunger car 2904 2704 2 2904 2705 2 2917 2117 2 1500 lb. 2000 lb. Slider with Shackle and Plunger mm 4 3/8 accepted and used on many boats up to eight oz see p.143 50ft.g For details 56 2 1/4 540 11/ 16 56 2 1/4 719 25.3 19.1 3000 6600 120 1500 3300 3000 6600 128 5 56 2 1/4 719 25.3 1500 3300 3000 6600 147 5 3/4 64 2 1/2 767 27.1 1500 3300 3000 6600 120 4 11/16 56 2 1/4 480 2350 5170 4700 10340 170 6 3/4 56 2 1/4 1199 2917 2016 4 in 3300 T-TRACK ACCESSORIES Safe Breaking 29172015 29172016 w w w. l e w m a r. c o m Tri-Roller Genoa Car Control Line Sheave Car in i th 1500 Genoa Cars & T-Track Accessories — Specifications 1000 lb. Part 32mm T-Track is a universal track widely Length mm 2904 2705 Additional Information w w w. l e w m a r. c o m e cription 3 Length kg Rope or Cord Dia. Size 2 Breaking Load 50ft.lb Working Load Load 120 17 2917 2015 47.3 4.2 Length Control line kg lb end kg stoplb 19mm 900 end 1980stop 1800 Track 3960 111 4 3/8 in Width mm Weight in g 56 2 1/4 540 19.1 oz 25.3 Genoa Cars & T-Track Accessori 1500 3300 3000 6600 120 4 11/16 56 2 1/4 719 1500 3300 Part 3000 6600 128 5 56 2 1/4 719 25.3 1500 3300 6600 64 2 1/2 767 27.1 2 1/4 480 17 1500 Number 3000 Size 147 Description 3 5 /4 33002904 30001700 6600 1120 Plunger 4 11/16 Car 56 regarding the correct hardware for your boat. 574 Cordage, Rigging & Sailboat Hardware cean ar Selection Guide Application Sheeting o ition o ing rcha e (Maximum vailable urchase) 7.3 24 8.5 28 10.3 34 11.5 38 ain heet ra eller S Size 13.4 14.6 48 44 tem 16.4 54 18.2 60 21.3 70 21 70 21 Genoa n Boom Main heet 21 Mi Boom or M ltih ll 21 Traveller kits are made up of all the necessary components to assemble a standard system. Each one comes with Lewmar s sliding bolt track, which allow you to retrofit the new track to your deck using the original bolt holes. 1 4 1 or 2 1 to Winch n Boom Main heet 1 41 Mi Boom or M ltih ll 1 41 Genoa 2 4 1 or 2 1 to Winch n Boom Main heet 2 51 Mi Boom or M ltih ll 2 51 Genoa 3 5 1 or 2 1 to Winch n Boom Main heet 3 5 1 or 2 1 to Winch Mi Boom or M ltih ll 3 5 1 or 2 1 to Winch Genoa ote Boat Length Overall m ft ain heet ra eller S tem Traveller kits are made up of all the necessary components to assemble a standard system. Each one comes with Lewmar s sliding bolt track, which allow you to retrofit the new track to your deck using the original bolt holes. ize 3 also includes igh Load options. MAINSHEET SYSTEMS To simplify the process of selecting your mainsheet system Lewmar offers complete system kits in sizes 0-2. The kit comprises all component parts required to assemble a standard system for yachts up to 48 ft. All kits are supplied with Lewmar s sliding bolt track which offers the facility to retro-fit the new track to the deck using the original bolt holes. Mainsheet cars are shackle versions. ain heet S tem Si e 1 ain heet S te Si e n the ize 1 kit, you ll find all the components necessary to assemble a Si e 0 ain heet S te standard system for yachts up to 36 feet (11m) long. Si e 1 ain heet S sliding bolt track. te Si e n the ize 1 kit, you ll find all the components necessary to assemble a Si e 1 te everything you need for a complete standard system, in Mainsheet Traveller it ize 0 Lewmar makes selecting your mainsheet system simple — with complete Mainsheet ystem its. Lewmar s ize 0 cean Mainsheet ystem is a complete kit made specifically for yachts up to 28 feet (8.5m) long. ain heet S Like the size 1 system, the ize 2 Mainsheet system com ra eller standard system for yachts up to 36 feet (11m) long. ain heet S ize 2 can fit yachts up to 49 feet (1 te Like the size 1 system, the ize 2 Mainsheet system comes with it 4 1 urcha e S te everything you need for a complete standard system, including the sliding bolt track. ize 2 can fit yachts up to 49 feet (15m) long. si e si e ra eller syste Si e 1 ra eller it 4 1 urcha e S o prises o si e 138 yster w w w. l e w m a r. c o m Control Line heave, Cleats Becket 1 x Mainsheet Car 2 x End top Track Length Line sheaves 1x ize 1 Dead Eye 2x mall Composite Cleat 2x mall Cam airlead Track Length oat si e Ma p to 28ft Beam, Drilled or liding Bolt 16m2 12m2 400kg Mainsail rea 1.8m p to 11m (36ft) p to 11m (36ft) p to 14.6m (48ft) p to 14.6m (48ft) Mainsail rea EndEnd Boom Boom Boom MidMid Boom 170 ft2 130 ft2 990 lbs 1.8m 1.5m oat si e Ma p to 8.5m 1.5m 1 x liding Bolt Track 1 x 1.2m liding Bolt Track Ma Mainsail rea End Boom Mid Boom afe Working Load 2009 o prises o 1 x 2 xliding Boltwith Track End stop Double Control oat si e si e 2 x End stop with Double Control Mainsheet Car hackle and 2 Double Line1 xsheaves ean ra eller syste o prises o ra k si e eller syste 1 x ra Mainsheet Car hackle and 2 Double Control Line heave, Cleats Becket ean ra eller it ur hase syste si e te afe Working Load afe Working Load 2 34m (366ft34m ) 2 2 2 2 21m (226ft21m ) 2 2 (366ft ) (226ft ) 900kg (1980 lb) 0 a S S 2 2 2 38m (410ft ) 900kg (1980 lb) S 2 46m (495ft ) 2 1 1000kg (2000 lb) a S 2 2 2 2 46m (495ft ) 38m (410ft ) 1000kg (2000 lb) a S S S 143 575 Cordage, Rigging & Sailboat Hardware MAINSHEET AND GENOA SIZE 0 OCEAN CARS For boats up to 8.5m/28ft. Use size 0-1 or Synchro 50mm/60mm blocks. Suitable for 6mm 1/4 control line. 29030100 29170030 29170040 29040600 Description Safe Work Load kg lb Mainsheet car w/delrin balls & shackle 450 990 600 1325 Control line end stop w/sheave ardware End stop Genoa car w/slide rods & plunger Si e cean ar Car with TB Torlon Balls & Shackle ain heet S tem SIZE 1 NEW TRAVELLER RANGE MAINSHEET & 0GENOA CARS or boats up to 8.5m 28ft. se size 1 or Car with TB Torlon Balls & Upstand For boats up to 11m 36ft upstands for 60mm blocks, option on 29431712 to fit 72mm. Control line ynchro 50mm 60mm blocks. uitable for sheaves are 30mm 1-3/16 diameter have a SWL of 525kg 115lbs and are suitable for 8mm Si 5/16e 0 ain heet S te 6mm (1 ) control line. Lewmar makes selecting your mainsheet system simple — with complete control line. Genoa sheet sheaves are 60mm 2-3/8 diameter. Travellers will fit all current Ocean Mainsheet ystem its. Lewmar s ize 0 cean Mainsheet ystem is a Size 1 tracks. TB cars run on Torlon Balls. SR cars run on Slide Rods. complete kit made specifically for yachts up to 28 feet (8.5m) long. 29471030 29471031 29471032 29471010 29471011 29471012 29471015 29471037 29471027 29431300 29441321 29441331 29441720 29441730 29171040 Description Safe Work Load kg lb Bare end Stop 585 1287 End stop single CL sheave 585 1287 End stop double CL sheave 585 1287 Becket assy pair 585 1287 585 1287 Double CL sheave assy pair 585 1287 Cleat assy for end stop pair 180 396 Plunger stop 650 2902 0701 Single CL sheave assy pair Car with TB Torlon Balls , Genoa Stirrup & Single sheave si e ean ra eller it ur hase syste si e TB main sheet car with shackle 600 1329 TB car with genoa stirrup one CL sheave port 900 1980 TB car genoa stirrup one CL sheave stbd 900 1980 SR car genoa stirrup plunger stop port 1000 2200 SR car genoa stirrup plunger stop stbd 1000 2200 2903 0600 1 x Mainsheet Car 2 x End top 1 x 1.2m liding Bolt Track 1x ize 1 Dead Eye 2x mall Composite Cleat 2x oat si e Track end stop ra k Beam, Drilled or liding Bolt SIZE 2 NEW TRAVELLER RANGE MAINSHEET & GENOA CARS 2903 0100 For boats up to 15m 49ft . Upstands for 72mm blocks, option on 29432424 to fit 90mm. Control line sheave are 40mm 1-9/16 diameter have a SWL of 750kg 1659lbs and are suitable for 10mm 3/8 control line. Also available are ball bearing sheaves - suitable for mainsheet car towing loads. Genoa sheet sheave 72mm 2-7/8 diameter. Travellers will fit all current Ocean size 2 tracks. TB cars run on Torlon Balls. SR cars run on slide rods. Description TB main sheet car with shackle Safe Work Load kg lb 1500 3300 TB main sheet car with upstand 1500 3300 Bare end stop 750 1650 End stop single CL sheave 750 1650 End stop double CL sheave 750 1650 TB car genoa stirrup one CL sheave port 1500 3300 TB car genoa stirrup one CL sheave stbd 1500 3300 SR car genoa stirrup plunger stop stbd art 1500 3300 750 1650 2904 0600 Si eport 0 SR car genoa stirrup plunger stop Becket assy pair m er Single CL sheave assy pair Double CL sheave assy pair Cleat assy for end stop pair 2902 0701 e cription hort Car with Delrin Balls 750 hackle 1650 750 1650 Mainsheet Car with Delrin Balls 2903 0600 Mainsheet Car with lide Rods, hackle enoa Car with 180 lide Rods Control Line End top with heave Ball bearing sheave kit x4 End top Track end stop 240 170 ft2 130 ft2 990 lbs Becket Assy pair Track end stop 2917 0030 2917 0040 Safe kg l Breaking Loa kg l 200 440 460 1010 71 2.79 450 990 900 1980 123 4.83 450 990 900 1980 123 4.83 600 1325 1200 2650 123 4.83 200 440 58 2.3 orking Loa Single CL sheave assy pair hackle , 1 pair control line sheaves 396 lunger Conversion kit to re-circulate balls 2917 0030 2917 0040 16m2 12m2 400kg ar S eci cation 1500 3300 2903 0100 2904 0600 mall Cam airlead SR Slide Rods Car Genoa Stirrup p to 28ft Plunger stop p to 8.5m Ma Mainsail rea End Boom Mid Boom afe Working Load 29432300 29432400 29472030 29472031 29472032 29442321 29442331 29442720 29442730 29472010 29472011 29472012 29472015 29472027 29472970 29172040 ean ra eller syste o prises o Conversion kit to re-circulate balls lunger 460 1010 530 Double CL sheave assy pair 142 w w w. l e w m a r. c o m Length mm in 576 Cordage, Rigging & Sailboat Hardware CAR BEARING BALLS SLIDING BOLT TRACK Enables you to use the same bolt holes that hold the original track. It is used for cars with control lines. 29161115 29161120 29161130 29162115 29162120 29162130 size 1 size 1 size 1 size 2 size 2 size 2 m 1.5 2.0 3.0 1.5 2.0 3.0 ft 4 11 67 9 10 4 11 67 9 10 BEAM TRACK Used when spanning cockpits or companion way hatches. 29160315 29161315 29161320 29162315 29162320 size 0 size 1 size 1 size 2 size 2 m 1.5 1.5 2.0 1.5 2.0 ft 4 11 4 11 67 4 11 67 TORLON Per 100 29171021 29172021 29173021 29174021 Diameter mm in 6.4 1/4 7.8 5/16 9.5 3/8 12.7 1/2 Size 1 2 3 4 DELRIN Per 100 29175022 29170022 29171022 3.2 4.6 6.4 1/8 3/16 1/4 CAR BEARING - SLIDE RODS Per Pair 29170026 29171026 29172026 29173026 Size Where Used Diameter mm in 0 1 2 3 SZ 0 cars SZ 1 cars SZ 2 cars SZ 3 cars 4.6 6.4 7.8 9.5 3/16 1/4 5/16 3/8 32mm T-TRACK 32mm 1-1/4 wide T-Track has been in service for many years and is still currently used on many boats. 29166215 29166225 29166230 Length m 1.5m 2.5m 3m DRILLED PLUNGER TRACK General purpose track, use with plunger stop cars. 29160415 29160420 29161415 29161420 29161430 29162415 29162420 29162430 size 0 size 0 size 1 size 1 size 1 size 2 size 2 size 2 m 1.5 2 1.5 2 3 1.5 2 3 ft 4 11 67 4 11 67 9 10 4 11 67 9 10 BOOM BRAKE Gybing remains one of the most challenging operations on a sailing boat even for experienced sailors and can possibly generate injuries and material damage. Gyb Easy is an efficient and safe solution to reduce such risks. Thanks to the frictions of the specific line called Gyb Flex passing over the boom brake, the boom is allowed to gybe smoothly and without jerks. It takes a few minutes to install it on a eye strap of the boom. Two different fittings can be implemented to fit with all the deck configurations. WIC7150 Clutches — Features 577 Cordage, Rigging & Sailboat Hardware Lewmar has redefined rope clutch technology with a variable geometry handle and unique grip pattern of dominos that prevent rope fray. This revolutionary new system has been independently tested time and again and has won awards for its innovative framework. ROPE CLUTCH FEATURES ✗ Lewmar s award winning rope clutch redefined rope clutch technology, and the reputation has been continuously reinforced by magazine and independent tests. It remains the only true clutch on the market in that it can be released under load due to its unique variable geometry handle and the grip pattern of the dominoes. Supplied decals to identify line function Domino mechanism doesn t damage rope For easy installation the doubling plates under the fastenings and spring are located at the base of the unit well clear of deck fastenings 3 Rope Clutch Selection Guide Application SINGLE ROPE CLUTCH Boat Length Overall m 7.6 8.8 10.1 10.7 11.3 ft 25 29 33 35 37 Genoa Spinnaker Reef Lines Gooseneck 3 Outhaul 12.5 14.6 16.8 18.9 21.5 55 62 70 • Full Range • Easy Installation • High holding Power • Supplied with decals • Domino mechanism ✗ Main Halyards 11.9 41 48 114 39 Features Flattener Spin Pole Uphaul DOUBLE ROPE CLUTCH Pole/ Boom Lift Spin Pole Down Haul Heel Lift Main Boom Topping Lift Genoa Furling Lines Main Sheets Mainsheet 4:1 Purchase Lewmar’s award winning rope clutch can now be clearly Mainsheet Car (2:1 Purchase) Control Lines designed to suit all sailing applications. Pole Outhaul TRIPLE ROPE CLUTCH Kicking Strap/Vang 114 High load applications on boats up to 9.7m/32ft, low load and control line applications on larger boats. Safe working load wih Max, Dia. line Holding Loads Explained 500kg/1100lb. Line sizeload of each clutch is listed for The holding themm two mainin line sizes the clutch was single single single double double double triple triple 6-8 to hold, 1/4-5/16 designed the maximum and minimum are dependent on the line 8-10 listed 5/16-3/8 type used. 10-12 3/8-7/16 Rope can handle one line size 6-8clutches 1/4-5/16 below range but at a reduced 8-10the nominal 5/16-3/8 holding load, this can be useful for more 10-12 3/8-7/16 6-8 1/4-5/16 lines and down hauls. In virtually all cases 8-10 5/16-3/8 the larger the line the better the holding lightly loaded applications such as control triple 10-12so where 3/8-7/16 capacity, the ultimate load is Replacement handle required the larger of the designated line should be used. Holding Load kg/lb 29101108 29101110 29101112 29101208 29101210 29101212 29101308 29101310 29101312 29100010 • w w w. l e w m a r. c o m D2 ROPE CLUTCH • D1 Rope Clutch High load applications on boats up to 16.8m/55ft, low load and control line applications on larger boats. Safe working load wih Max, Dia. line 1200kg/2650lb. Line size mm in D1 Rope Clutch D2 Rope Clutch 29101410 single 8-10 5/16-3/8 29101412 single 10-12 3/8-1/2 29101414 single 12-14 1/2-9/16 29102410 double 8-10 5/16-3/8 Safe Working Load Safe 29102412 double 10-12 3/8-1/2 Working 29102414 double 12-14 1/2-9/16 Load 29103410 triple 8-10 5/16-3/8 29103412 triple 10-12 3/8-1/2 29103414 triple 12-14 1/2-9/16 29101501 Replacement handle This graph shows the range of holding D1 ROPE CLUTCH DIMENSIONS D2 ROPE CLUTCH DIMENSIONS Size Single Double Triple Size Single Double Triple Length mm in 126 5 126 5 126 5 be achieved, aLine goodEntry quality Width loads that can Height line will hold than ain softer mm hard in cored mm in better mm this may 27 be higher than 32.0 line, 1.3in some72cases2.8 1.1 rated Safe of the clutch 57.85 the 2.3 72 Working 2.8 Load27 1.1 83.7 but 3.3 72 the2.8 27before1.1 in all cases line will slip the Breaking Load is reached. D2 Rope Clutch Holding Load kg/lb D1 ROPE CLUTCH marked and identified with our range of info-graphics specially Genoa Car (2:1 Purchase) Length mm in 156 6.14 156 6.14 156 6.14 Line Size mm/in Width mm 38 68.5 99 in 1.5 2.7 3.9 Height mm in 88 3.4 88 3.4 88 3.4 Line Entry mm in 26 1 26 1 26 1 Line Size mm/in w 578 Cordage, Rigging & Sailboat Hardware Cleats Made from state-of-the-art materials developed by the automotive industry and cam fairlead feeder loop refined for the marine market, Lewmar cleats eye strap enhance performance in durability, strength SMALL AND MEDIUM CLEATS ats wedge Using state of the art materials developed by the automotive industry and refined for marine and lubrication. applications, Lewmar is back in the cleat market after an absence of 25 years. Modern materials use additives to enhance performance, whether it be wear, lubrication or brute strength. All the components of this new cleat use different compounds to maximize performance. Low line entry load High holding load Constant tension springs Wash out bearing slots Low line entry load Split base fairlead to facilitate continuous line installations Features • holding load • High Safe Work Max Load Line Size tension springs kg lb mm in • Constant 120 264 2-8 5/64-5/16 slots • Wash-out bearing 180 396 4-12 5/32-1/2 -• Split - base fairlead 2-8 5/64-5/16 to facilitate continuous om state-of-the-art materials ed by the automotive industry and Description or the marine market, Lewmar cleats 29104100 29104110 cation. 29104103 29104113 29104104 tures29104114 29104116 ne entry load 29904115 Small - composite cleat performance in durability, strength Medium - composite cleat Small - eye strap pair Medium - eye strap pair - Small - cam fairlead - Medium - cam fairlead Medium - feeder loop Small feeder loop holding load 4-12 line installations Angle wedges included in p 2910 4100 2910 4110 5/32-1/2 - 2-8 5/64-5/16 - - 4-12 5/32-1/2 - - 4-12 5/32-1/2 - - 2-8 5/64-5/16 2910 4100 2910 4110 Angle wedges included in package of 2910 4100 2910 4110 ant tension springs -out bearing slots base fairlead to facilitate continuous stallations CLEATS 29904101 29904111 Line Size mm in 2990 4117 Size Description Safe Working Load kg lb Small Cleat-alloy 140 309 2-6 Medium Cleat-alloy 200 441 4-10 5/32-7/16 BULLS EYE-WITH STAINLESS 2990 4118 STEEL INSERT PAIR 3/32-1/4 2990 4117 2990 4118 2910 4104 2910 4114 Line size mm inch Medium 12 1/2 Large 18 3/4 2990 4126 SERVO CLEATS B2827 B2830 B2828 B2829 29904117 29904118 Size Fits Size Fits Line Size mm inch 1 sz 1 Fiddle & sz 3 control line 6-12 41 1 sz1 Triple & sz 1, 2, 3 control line 6-12 2910 4104 1/4-1/2 2910 4114 1/4-1/2 Centre mm in 36 1-7/16 2 Triple & fiddle sz 2 10-14 1/2-3/8 52 2-1/16 3 Fiddle sz 3 10-16 3/8-5/8 52 2-1/16 Cleat Specifications 2910 4115 2910 4116 2910 4115 2910 4116 1-5/8 2910 4103 2910 4113 Save Cordage, Rigging & Sailboat Hardware BOW SHACKLE Stamped 304 stainless. 140106 140108 Breaking strength lbs A B C D 1/4 5/8 15/16 9/16 4,400 5/16 11/16 1-1/4 11/16 6,600 CAPTIVE PIN BOW SHACKLES Forged in 316L stainless steel. Patented Self-locking pin cannot be dropped when opened. Made in France. WIC1441 WIC1442 WIC1443 WIC1444 Pin Dia. A in. in. B in. C in. Break Load lbs 5/32 11/16 5/16 3/16 2200 3/16 29/32 13/32 1/4 3300 1/4 1-1/16 15/32 9/32 4850 5/16 1-15/32 5/8 11/32 8150 BOW SHACKLE Investment cast 316 stainless body 147054 147056 147058 147060 147062 147066 147069 147072 147075 A B 3/16 5/16 11/16 1/4 1/2 1-1/16 5/16 5/8 1-7/16 3/8 13/16 1-13/16 1/2 1 2-5/16 5/8 1-1/4 2-15/16 3/4 1-7/16 3-7/16 7/8 1-3/4 3-7/8 1 1-15/16 4-7/16 C CAPTIVE BOW SHACKLE Forged 316 stainless. Breaking 147223 147224 147226 147228 147230 B C D strength lbs 5/32 5/16 5/8 15/16 1,540 3/16 7/16 11/16 1 2,200 1/4 1/2 13/16 1-1/4 3,300 5/16 11/16 1-1/16 1-9/16 6,600 3/8 13/16 1-1/4 2 9,900 Stamped 304 stainless. Forged 316 stainless. Breaking 147203 147204 147206 147208 147210 147212 A D-SHACKLE BOW SHACKLE A B C D strength lbs 5/32 5/16 9/16 11/16 1,540 3/16 3/8 11/16 3/4 2,200 1/4 1/2 13/16 1-1/4 3,300 5/16 5/8 1 1-1/4 6,600 3/8 13/16 1-1/4 1-3/8 9,900 1/2 1 1-1/2 1-3/4 15,400 140041 140051 140052 140053 140054 140060 140062 140082 A B C Breaking strength lbs 5/32 3/8 5/8 1,100 3/16 7/16 11/16 2,640 3/16 5/8 1 2,640 3/16 5/8 1-7/16 2,640 3/16 1/2 1 2,640 1/4 5/8 15/16 3,080 1/4 9/16 1-5/8 6,600 5/16 3/4 1-5/8 6,600 D-SHACKLE Investment cast 316 stainless body SELF-LOCKING BOW SHACKLES Forged in 316L stainless steel. Patented Self-locking pin to avoid accidental release due to vibrations. Made in France. WIC1242 WIC1243 WIC1244 WIC1245 WIC1246 Pin Dia. in. A in. B in. Break Load lbs 3/16 29/32 13/32 2200 1/4 1-3/32 15/32 3300 5/16 1-15/32 5/8 5950 13/32 15/32 1-27/32 2-1/8 25/32 15/16 9480 13200 579 147004 147006 147008 147010 147012 147016 147019 147022 147025 A B C 3/16 5/16 9/16 1/4 1/2 13/16 5/16 5/8 1-1/8 3/8 13/16 1-3/8 7/16 1 1-5/8 5/8 1-1/4 2-3/16 3/4 1-1/2 2-5/8 7/8 1-3/4 3 1 2 3-7/16 580 Cordage, Rigging & Sailboat Hardware D-SHACKLE SAILMAKER D-SHACKLE Forged 316 stainless. Stamped 304 stainless. Breaking 147103 147104 147106 147108 147110 147112 A B C strength lbs 5/32 3/8 11/16 1,540 3/16 7/16 11/16 2,200 1/4 1/2 3/4 3,300 5/16 11/16 1-1/4 6,600 3/8 13/16 1-3/8 9,900 7/16 15/16 1-1/2 15,400 140141 140151 140152 140153 140154 140156 SELF LOCKING D-SHACKLES Pin Dia. A in. in. B in. Break Load lbs 5/32 17/32 5/16 1550 3/16 5/8 13/32 2200 1/4 25/32 15/32 3525 5/16 1-1/32 5/8 5950 13/32 15/32 1-5/16 1-17/32 25/32 15/16 9480 13200 9/16 1-55/64 1-7/64 17630 147153 147154 147156 147158 147160 Breaking strength lbs 5/32 3/8 5/8 1,100 3/16 7/16 11/16 2,640 3/16 5/8 1 2,640 3/16 5/8 1-7/16 2,640 3/16 1/2 1-1/16 2,640 1/4 5/8 1 3,080 A B C Breaking strength lbs 5/32 5/16 1-5/16 1,540 3/16 7/16 1-1/2 2,200 1/4 1/2 1-13/16 3,300 5/16 11/16 2-7/16 6,600 3/8 15/16 3 9,900 SELF-LOCKING LONG D SHACKLES Forged 316 stainless. Forged in 316L stainless steel. Patented Self-locking pin to avoid accidental release due to vibrations. Made in France. Breaking A B C strength lbs 5/32 3/8 11/16 1,540 3/16 7/16 11/16 2,200 1/4 1/2 3/4 3,300 5/16 11/16 1-1/8 6,600 3/8 13/16 1-3/8 9,900 1/2 15/16 1-1/2 15,400 WIC1211 WIC1212 WIC1213 WIC1214 WIC1215 CAPTIVE PIN D-SHACKLES Pin Dia. A in. in. B in. Break Load lbs 1540 5/32 7/8 5/16 3/16 1-5/32 13/32 2200 1/4 1-5/16 15/32 3525 5/16 13/32 1-25/32 5/8 5950 2-5/32 25/32 9480 CAPTIVE PIN LONG SHACKLES Forged in 316L stainless steel. Patented Self-locking pin cannot be dropped when opened. Made in France. WIC1401 WIC1402 WIC1403 WIC1404 WIC1405 C Forged 316 stainless. CAPTIVE PIN D-SHACKLE 147123 147124 147126 147128 147130 147132 B LONG D-SHACKLE Forged in 316L stainless steel. Patented Self-locking pin to avoid accidental release due to vibrations. Made in France. WIC1201 WIC1202 WIC1203 WIC1204 WIC1205 WIC1206 WIC1207 A Pin Dia. A in. in. B in. C in. Break Load lbs 5/32 1/2 5/16 3/16 2200 3/16 5/8 13/32 1/4 3300 1/4 25/32 15/32 9/32 4850 5/16 1-1/32 5/8 11/32 7930 13/32 1-5/16 25/32 7/16 11450 Forged in 316L stainless steel. Patented Self-locking pin cannot be dropped when opened. Made in France. WIC1411 WIC1412 WIC1413 WIC1414 Pin Dia. A in. in. B in. C in. 5/16 3/16 Break Load lbs 5/32 1-7/32 3/16 1-17/32 13/32 1/4 3300 1/4 1-13/16 15/32 9/32 4850 5/16 2-7/16 5/8 2200 11/32 7930 Cordage, Rigging & Sailboat Hardware KEY PIN SHACKLE Stamped 304 stainless. 140204 140205 140206 140207 140208 140210 A B C Breaking strength lbs 5/32 7/16 3/4 1,320 3/16 5/8 1-7/16 2,640 3/16 1/2 1 2,640 1/4 5/8 1-9/16 4,400 1/4 9/16 1 4,400 5/16 13/16 1-5/8 6,600 TWISTED SHACKLE Stamped 304 stainless. 140174 140175 140176 140178 Breaking strength lbs A B C 3/16 7/16 7/8 2,640 3/16 7/16 1-5/16 2,640 1/4 9/16 1-3/8 4,400 5/16 11/16 1-1/2 6,600 TWISTED SHACKLE Forged 316 stainless. KEY PIN SHACKLES Forged in 316L stainless steel. Key pin shackles offer many advantages. The pin can easily be opened by a single half turn, but remains captive within the body of the shackle. Made in France. WIC1432 WIC1433 WIC1434 Pin Dia. A B Break Load lbs 3/16 1-7/16 1/2 2200 1/4 1-3/4 5/8 3300 5/16 2-5/16 27/32 5060 HALYARD SHACKLE Stamped 304 stainless. 140234 140235 140236 140238 LOOSE PIN A B C D Breaking strength lbs 3/16 1/2 9/16 3/8 1,540 3/16 5/8 13/16 1/2 1,540 1/4 5/8 1 1/2 3,300 5/16 13/16 1-1/16 7/16 4,400 Forged in 316L stainless steel. Key pin shackles offer many advantages. The pin can easily be opened by a single half turn, but remains captive within the body of the shackle. The bar allows the line, thimble or grommet to remain attached to the shackle. Made in France. Pin Dia. A in. in. B in. C in. Break Load lbs 3/16 1-7/16 1/2 15/32 2640 1/4 1-3/4 5/8 19/32 3750 5/16 2-5/16 27/32 25/32 5510 Breaking strength lbs B C 5/32 5/16 1-1/4 1,540 3/16 3/8 1-1/2 2,200 1/4 1/2 1-13/16 3,300 5/16 5/8 2-1/4 6,600 3/8 13/16 2-3/4 9,900 CAPTIVE PIN TWISTED SHACKLES Forged in 316L stainless steel. Patented Self-locking pin cannot be dropped when opened. Made in France. WIC1422 WIC1423 WIC1424 KEY PIN HALYARD SHACKLES WIC81432 WIC81433 WIC81434 147403 147404 147406 147408 147410 A Pin Dia. A in. in. B in. C in. Break Load lbs 3/16 1-15/32 13/32 1/4 3300 1/4 1-3/4 15/32 9/32 4600 5/16 2-5/16 5/8 8150 11/32 WIDE D-SHACKLE MOORING BUOY SHACKLE Forged 316 stainless. 147184 147186 147188 147190 Breaking strength lbs A B C 3/16 13/16 1-7/16 2,200 1/4 1-1/8 1-11/16 3,000 5/16 1-3/8 2-1/8 6,000 3/8 1-11/16 2-3/4 9,000 581 582 Cordage, Rigging & Sailboat Hardware TOGGLE SNAP SHACKLE TRIGGER SNAP SHACKLES Investment cast 316 stainless. 142702 142902 A B C D E 2-11/16 9/16 3/8 9/16 1/4 3-5/16 9/16 9/16 3/4 1/4 Forged in HR s/s. Ideal for spinnaker sheets. Outstanding working loads. Opens manually or with a fid. Fast rotating swivel. Designed and made in France. Swivel Eye Length A B Break Load WIC2653 3-3/8” 11/16” 7/16” 7270 lbs WIC2655 4-1/8” 13/16 9/16” 9030 lbs Large Bail WIC2755 HR CLEVIS PIN SWIVEL SNAP SHACKLES Forged in HR stainless steel. Open easily under load, even at a distance with a line or webbing . Indispensable for spinnakers, they are useful for any application which requires release under load towing, lifting or material handling . Made in France. WIC2474 WIC2476 WIC2478 Length A in. in. B in. C in. Dia. D in. Break Load lbs 2-3/4 5/8 15/32 19/32 1/4 3520 3-7/8 13/16 11/16 15/32 9/32 8370 4-3/4 1-1/32 1-1/16 1-11/16 7/16 15430 4-1/2” 13/16” 1” 8800 lbs QUICK RELEASE SNAP SHACKLES HR Forged in HR s/s. Ideal for spinnaker sheets. Outstanding working loads. Control line for easy release. Fast rotating swivel. Designed and made in France. With Swivel Length A B Break Load WIC2674 3-5/32” 5/8” 15/32” 5070 lbs WIC2675 3-17/32” 25/32” 1/2” 7050 lbs FIXED SNAP SHACKLE Investment cast 316 stainless. SWIVEL SNAP SHACKLE Investment cast 316 stainless. 142700 142900 A B C 2-11/16 1/2 9/16 3-1/2 5/8 3/4 143520 143660 A B 2-1/4 3/8 C 9/16 2-13/16 1/2 3/4 FIXED EYE Forged from high resistance HR stainless steel except WIC2470 . HR SWIVEL EYE SNAP SHACKLES Forged in HR stainless steel. Open easily under load, even at a distance with a line or webbing . Indispensable for spinnakers, they are useful for any application which requires release under load towing, lifting or material handling . Made in France. WIC2473 WIC2475 WIC2477 Length in. A in. B in. Break Load lbs 2-3/4 5/8 7/16 4400 3-1/2 13/16 9/16 8150 4-3/4 1-1/32 1-3/16 15430 WIC2470 WIC2471 WIC2472 Length in. A in. B in. Break Load lbs 1-3/8 5/16 1/4 880 2 5/8 13/32 4400 2-3/4 13/16 1/2 6600 LANYARD Lanyard to open a snap shackle, a snatch block. WIC9301 Cordage, Rigging & Sailboat Hardware FAST EYE BOAT SNAP Sand cast brass Cast 316 stainless Stainless steel Bronze 139120 139121 139122 139123 146120 146121 146122 146123 249SS-0 249SS-1 249SS-3 SWIVEL EYE BOAT SNAP 249B-1 249B-3 Size A B C 0 2-1/8 1/4 7/16 1 2-7/8 5/16 5/8 2 3-3/16 1/2 3/4 3 3-13/16 9/16 3/4 Sand cast brass Cast 316 stainless Stainless steel Bronze Size A B C 139131 139132 139133 146131 146132 146133 251SS-1 251SS-2 251SS-3 251B-1 251B-2 251B-3 1 3-3/16 3/8 5/8 2 3-11/16 1/2 3/4 3 4-1/2 9/16 3/4 TRIGGER SNAP Die cast manganese bronze. FAST EYE BABY SNAPS 136800 Die cast manganese bronze. 138420 A B C 1-13/16 1/4 7/16 Length Eye 2-9/16 1/2 TRIGGER SNAP Investment Cast 316 Stainless. 146048 SWIVEL EYE BABY SNAP Die cast manganese bronze. 131042 131045 A B C D Finish 2-1/16 1/4 7/16 5/16 Bronze 2-1/16 1/4 7/16 5/16 Chrome Length Eye 2-11/16 1/2 SWIVEL EYE BOLT SNAP Investment Cast 316 Stainless. 146590 A B C 3-9/16 5/16 3/4 SWIVEL EYE BOLT SNAP Die Cast Manganese Bronze BULL NOSE SNAP Sea-Dog Investment Cast 316 Stainless. 146333 A B C 4-1/2 1/2 1 136012 136016 136021 136025 Keystone 225B-58 225B-34 225B-1 225B-114 136590 A B C D 2-11/16 5/16 5/16 1/2 3-1/8 3/8 3/8 5/8 3-3/16 3/8 3/8 7/8 3-1/2 7/16 3/8 1 4-11/16 9/16 5/8 1-1/4 3-5/16 7/16 1/2 11/16 BULL NOSE SNAP Die Cast Zinc Chrome Plated. 148333 A B C 4-1/8 9/16 11/16 HALYARD SNAP Die cast manganese bronze. 136100 A B C 3-1/2 3/8 3/4 583 584 Cordage, Rigging & Sailboat Hardware SNAP HOOKS Mild Steel Electro Galvanized Mild Steel Electro Galvanized Stainless Steel AISI 316 Stainless 2450-6 2450-8 2450-10 n/a n/a n/a 156060 156080 156100 156120 156140 156160 2450SS-6 2450SS-8 2450SS-10 2450SS-11 n/a n/a 151560 151580 151600 151620 n/a n/a A B C D Breaking Strength lbs 1/4 2-3/8 5/16 5/16 560 galv/700 ss 5/16 3-1/8 7/16 3/8 1,400 3/8 4 9/16 1/2 1,600 7/16 4-3/4 3/4 5/8 2,000 1/2 5-9/16 3/4 3/4 2,800 1/2 6-1/4 7/8 7/8 6,000 ASYMMETRICAL SNAP SNAP HOOK AISI 316 stainless steel snap. AISI 316 stainless, key lock system. 151060 151080 151100 151120 A B C D Breaking Strength lbs 1/4 2-3/8 3/8 3/8 660 5/16 3-1/8 7/16 7/16 1,700 3/8 4 9/16 5/8 2,600 7/16 4-3/4 3/4 11/16 4,400 SNAP HOOK WITH EYE INSERT 150060 150080 150100 150120 151065 151085 151105 151125 B C D Breaking strength lbs 1/4 2-3/8 1/4 3/8 660 5/16 3-1/8 3/8 7/16 1,700 3/8 4 7/16 9/16 2,600 7/16 4-3/4 9/16 11/16 4,400 B C D Breaking Strength lbs. 1/4 2-3/8 5/16 7/16 1,160 5/16 3-1/4 7/16 1/2 2,300 3/8 4 9/16 3/4 3,600 7/16 4-3/4 13/16 15/16 6,600 ASYMMETRICAL SNAP WITH EYE INSERT AISI 316 stainless steel snap. AISI 316 stainless, key lock system. A A 150065 150085 150105 150125 A B C D Breaking Strength lbs. 1/4 2-3/8 1/4 7/16 1,160 5/16 3-1/4 7/16 1/2 2,300 3/8 4 9/16 11/16 3,600 7/16 4-3/4 11/16 15/16 6,600 SNAP LINK AISI 316 Stainless 152080 152100 Stock dia. Length Jaw Breaking Strength 5/16 3-3/16 5/8 2600 lbs. 7/16 3-15/16 3/4 5390 lbs. SNAP HOOK OFFSET GATE AISI 316 stainless, key lock system. 151082 151102 151122 A B C D Breaking strength 5/16 3-1/8 3/8 3/4 1,700 3/8 4 1/2 7/8 2,600 7/16 4-3/4 11/16 1-1/16 4,400 SNAP LINK WITH EYE AISI 316 Stainless 152085 152105 Stock dia. Length Jaw Eye Breaking Strength 5/16 3-3/16 9/16 7/16 2600 lbs. 7/16 3-15/16 11/16 9/16 5390 lbs. Cordage, Rigging & Sailboat Hardware SPRING GATE SNAP HOOK SIMPLE MOORING HOOKS Investment cast 316 stainless. The mooring hooks can be adapted for all types of boat hooks not supplied . They are an economical and simple solution for fastenings to mooring buoys. WIC92326 4” L. 1/2” rope WIC92327 4-23/32” L. 5/8” rope WIC92328 6-11/16” L. 11/16” rope 154250 154270 154300 A B 2 7/16 2-3/4 7/16 3-15/16 15/16 SNAP HOOK CARBINE SNAP HOOK - PATENTED Simple, strong and safe, all these hooks employ the famous Wichard torsion spring. Sail snaps can be operated with one hand, so the other is free to hold onto the boat. Made in France. Forged in 316L stainless steel. Made in France L A B B.L. lbs WIC2480 WIC2481 WIC2482 2 1/4 11/32 660 3 25/32 13/32 1540 4 1/2 5/8 3300 SYMMETRIC CARBINE HOOKS WIC2313 WIC2315 WIC2316 WIC2317 Dia. Length A B B.L. lbs. 1/4 2-3/8 13/32 5/16 1320 5/16 3-5/32 1/2 11/32 2860 13/32 4 19/32 1/2 5500 15/32 4-5/8 13/16 11/16 7930 SYMMETRIC CARBINE HOOKS WITHOUT EYE WIC2333 WIC2335 WIC2336 WIC2337 B SNAP SWIVEL Forged in 316L stainless steel. Made in France L A B B.L. lbs WIC2384 WIC2385 Dia Length A 1/4” 2-3/8” 13/32” 5/16” 3-5/32” 1/2” 1/2” 3520 13/32” 4” 19/32” 916” 5500 15/32” 4-5/8” 1316” 5/8” 8400 2-3/4 1/2 5/16 660 4 3/4 15/32 1650 B.L. lbs. 5/16” 1320 DOUBLE ACTION SAFETY HOOK ASYMMETRIC CARBINE HOOKS WIC2323 WIC2325 WIC2326 WIC2327 Dia. Length A B B.L. lbs. 1/4 2-3/8 7/16 5/16 1760 5/16 3-5/32 19/32 7/16 3300 13/32 4 23/32 1/2 5500 15/32 4-5/8 1 5/8 9925 This double action safety hook operates using a patented, one-hand activated twin trigger function to open the gate. The hook is made from high-grade stainless steel and combined with a UV-resistant polymer lever/grip. Break load 6170 lbs. Yellow. WIC2454 Length A B 4-17/32 23/32 3/4 x 13/32 JIB SNAP ONE HAND SAIL SNAPS Brass WIC72486 WIC72483 WIC72487 Length 2” 2-5/32” 2-9/16” Break Load 220 lbs 400 lbs 550 lbs Cast manganese bronze - hammer shut style - no sewing necessary. 136540 136550 136560 136575 Length 1-11/16 2-1/8 2-1/2 3-1/8 585 586 Cordage, Rigging & Sailboat Hardware s o ne SAIL NEEDLE SPLICING KIT FOR BRAIDED ROPES 501-2 509-9 509-10 509-11 509-12 Includes 1/4 , 5/16 , 3/8 , 7/16 , 1/2 aluminum fids, small pusher and instructions. SAM9990070 Curved 509-13 509-14 509-15 509-16 509-17 4 length 3-3/4 length 3-1/2 length 3-1/4 length 3 length 2-3/4 length 2-1/2 length 2-3/8 length 2-1/4 length s o ne TRAINING KIT AUTOMATIC AWL SAM9990010 413OS 413RB 413RBR 413RW Ideal for sewing leather, canvas and similar materials. The awl carries a spool of thread on the handle. Hollow handle holds extra curved needle and wrench. Comes with one straight and one curved diamond coated needle. For splicing dual braided ropes. Full instructions for making an eye splice. A versatile and useful skill for handling braided rope. Kit includes 1/2 fid, small pusher, instructions and two lengths of 1/2 double braid line. Automatic Awl Spare thread and reel, black Spare thread and reel, brown Spare thread and reel, white SPLICING MANUAL This guide has easy to follow instructions complete with illustrations. 30 different splices are covered. SAM9960060 BRAID OVER BRAID POLYESTER LOW STRETCH ALUMINIUM FIDS Machined aluminum. SAM9010160 SAM9010200 SAM9010240 SAM9010280 SAM9010320 SAM9010360 1/4 5/16 3/8 7/16 1/2 9/16 SAM9010400 SAM9010480 SAM9010560 SAM9010640 SAM9130000 SAM9140000 5/8 3/4 7/8 1 Small pusher Large pusher An excellent choice for sheets and halyards due to its balanced and round construction, low stretch and high tensile strength. Spliceable. Available with colour identification markers in black, blue, green and red. Sold in 600 reels. Diameter Tensile Strength UNI38X600YB 3/8 4245 lbs UNI12X600YB 1/2 7500 lbs Replace in part number with colour code to choose tracer colour Black BK, Blue BL, Green GR, Red RD, WH solid white SPLICING FIDS Stainless steel with hardwood handle. 562008 562016 1/8 - 1/2 1/2 and up Keystone DREW MARLIN SPIKE Made of high grade carbon steel carefully forged, hardened and tempered. Fully polished. 1860 1861 1862 1863 1864 1865MAR 6 8 10 12 14 16 s o ne SAIL PALM A fine quality rawhide palm with iron thimble, hide bound. Made in both right and left hand models. 265L 265R Left Hand Right Hand LS AND LST YACHT BRAIDS Good general purpose, low stretch yacht braids for all applications. Polyester cover/polyester core. Cover is white with your choice of black, red, green, blue or variegated red and green tracer. Splicing Class I double braid splice Good strength characteristics Great flexibility and handling Excellent abrasion resistance Sold in 500 reels. 450012 05030 450016 05030 450020 05030 450024 05030 450028 05030 450032 05030 450040005030 Size Avg strength 3/16 1200 lbs 1/4 1850 lbs 5/16 2275 lbs 3/8 3700 lbs 7/16 4900 lbs 1/2 7000 lbs 5/8 11000 lbs White only Replace in part number with colour code to choose tracer colour 2 Black, 4 Red, 5 Green, 8 Blue, 0 White with red/green variegated Note the 3/16 dia. is not spliceable due to its parallel core construction Cordage, Rigging & Sailboat Hardware XLS TROPHY AND XLS SOLID Polyester cover/polyester core. XLS Yacht braid has less elongation and a heavier cover and lower stretch construction than LS and LST. 2-in-1 double braid construction with a polyester cover and core. XLS has a white cover and is available with red, green, blue tracers and the red/green variegated. XLS Solid Colour is available with a black, red, green or blue cover, all having a red and green variegated ID tracer. Splicing Class I double braid splice Highest strength double braid polyester rope Lowest stretch of our polyester double braids Outstanding abrasion resistance Sold in 500 reels XLS White 455012 05030 455016 05030 455020 05030 455024 05030 455028 05030 455032 05030 455036005030 455040005030 XLS Solid 456012 456016 456020 456024 456028 456032 05030 05030 05030 05030 05030 05030 Size Avg strength 3/16 1200 lbs 1/4 2200 lbs 5/16 3300 lbs 3/8 4400 lbs 7/16 5800 lbs 1/2 8300 lbs 9/16 11000 lbs 587 BRAID Spun polyester cover/polyester core. The soft, fuzzy cover makes the line easier to grip and holds well in cam and jam cleats. It also provides a more solid grip on winch drums, especially under wet conditions. Due to its gentle feel, Trophy is often selected for sheets. Available in blue, green or red cover with a variegated red and green ID tracer. Splicing Class I double braid splice Easy to hold, wet or dry Holds well in all types of cleats Has a solid grip on winch drums Sold in 500 reels. Size Avg strength 453012 453016 453020 453024 453028 453032 05030 05030 05030 05030 05030 05030 3/16 800 lbs 1/4 1400 lbs 5/16 2000 lbs 3/8 3000 lbs 7/16 4000 lbs 1/2 6000 lbs Replace in part number with colour code to choose cover colour 4 Red, 5 Green, 8 Blue Note the 3/16 dia. is not spliceable due to its parallel core construction 5/8 13600 lbs Note the 3/16 dia. is not spliceable due to its parallel core construction Available in red/green variegated only Replace in part number with colour code to choose tracer colour XLS White or cover colour for solid XLS Solid 2 Black, 4 Red, 5 Green, 8 Blue, 0 White with red/green variegated MLX XLS EXTRA XLS Extra was created for performance-oriented cruisers and for club racers wanting higher strength and lighter weight than polyester double braids. XLS Extra offers the smooth flexibility of a 24-strand braided polyester cover with a braided core made from a blend of MFP and Dyneema . Cover is navy blue with your choice of beige, blue, green or red colour tracers. Splicing Class II Double Braid Splice Excellent wire halyard replacement Lighter weight than double-braid Low stretch Sold in 500 reels. 442016 442020 442024 442028 442032 05030 05030 05030 05030 05030 Size Avg strength 1/4 2300 lbs 5/16 3500 lbs 3/8 4600 lbs 7/16 6100 lbs 1/2 8700 lbs Replace in part number with colour code to choose tracer 4 Red, 5 Green, 8 Blue, 9 Beige Designed for the club racer, but also suitable for the performanceoriented cruiser, MLX is a new double braid construction that incorporates a first-of-its-kind core with a polyester cover. The unique core is a blend of a new and exclusive fibre, Innegra -S, a high modulus polypropylene HMPP , and Dyneema , a high modulus polyethylene HMPE . Innegra -S is available to the rope industry only through Samson and provides a bridge between the performance characteristics and price tags of traditional synthetic fibers, such as nylon and polyester, and high-performance synthetic fibers such as Technora , Dyneema , and Vectran . MLX is a lightweight core-dependent line that has excellent strength and low stretch. The core is Samthane coated to match the colour of the cover, making the line strippable for greater weight savings. Available in all white, black/white, red/white, green/white or blue/white flecked. Low stretch High strength Lightweight Sold in 500 reels. Size Avg strength 434012 434016 434020 434024 434028 434032 05030 05030 05030 05030 05030 05030 3/16 1800lbs 1/4 3800 lbs 5/16 4500 lbs 3/8 7200 lbs 7/16 9500 lbs 1/2 15000 lbs Replace in part number with colour code to choose fleck colour 2 Black, 4 Red, 5 Green, 8 Blue, 0 Solid white no fleck 588 Cordage, Rigging & Sailboat Hardware WARPSPEED ULTRA-TECH Ultra-Tech combines high performance with great value. This coredependent double braid consists of a braided Technora core as the strength member with a 24-strand braided polyester cover. Technora is a high-strength heat-resistant fiber with low stretch. Technora also has better resistance to flex-fatigue than other aramid fibers. ColourMatch 24 A clever system for maintaining the colour coding of a line even when the cover has been stripped Now you can finally strip the covers off your halyards and still easily distinguish one line from another without any special gadgets or hardware because the core is urethanecoated the same colour as the tracer colour in the cover. The cover is burgundy with your choice of red, green, blue or black tracer colours. Splicing Class II double braid splice Replaces wire halyards Works well around sheaves and winches For the high performance sailor Economical No creep Sold in 500 reels. 443012 443016 443020 443024 443028 443032 05030 05030 05030 05030 05030 05030 Size Avg Strength 3/16 2300 lbs 1/4 4800 lbs 5/16 7800 lbs 3/8 10000 lbs 7/16 14800 lbs 1/2 20000 lbs Replace in part number with colour code to choose tracer colour 2 Black, 4 Red, 5 Green, 8 Blue ULTRA-LITE Ultra-Lite is great for light wind sheets. This lightweight, floating double braid has a 24-Strand MFP cover and a blended core of MFP and Dyneema . Cover is available in black, red, green or blue. Tracer colour is yellow. Splicing Class II double braid splice It floats Lightest weight double braid Excellent strength Very low stretch Sold in 500 reels. 441012 441016 441020 441024 05030 05030 05030 05030 Size Avg Strength 3/16 1200 lbs 1/4 2200 lbs 5/16 2900 lbs 3/8 4400 lbs Note the 3/16 dia. is not spliceable due to its parallel core construction Replace in part number with colour code to choose cover colour 2 Black, 4 Red, 5 Green, 8 Blue A great strength-weight-stretch profile high strength, low stretch and very low weight makes WarpSpeed the high performance racer s choice for double braid ropes. The strength member in this double braid is 100 Dyneema SK-75 fiber. The cover is flexible 24-strand polyester that provides good handling, excellent performance in stoppers and clutches and enhanced abrasion resistance. The cover can be stripped where desired for greater weight savings. Colour-Match 24 A clever system for maintaining the colour coding of a line even when the cover has been stripped Now you can finally strip the covers off your halyards and still easily distinguish one line from another without any special gadgets or hardware because the core is urethane-coated the same colour as the tracer colour in the cover. WarpSpeed is beige with tracers available in black, blue, red and green. WarpSpeed White has an all-white cover, or is available in white with tracers of blue, red or green. Splicing Class II double braid splice Construction Core-dependent double braid Very low stretch Lightweight Excellent abrasion resistance Sold in 500 reels. White cover Beige cover Size Avg strength 544016 544020 544024 544028 544032 544036 05030 05030 05030 05030 05030 05030 444016 444020 444024 444028 444032 444036 05030 05030 05030 05030 05030 05030 1/4 5100 lbs 5/16 6200 lbs 3/8 9800 lbs 7/16 14000 lbs 1/2 21000 lbs 9/16 26500 lbs Replace in part number with colour code to choose tracer colour 2 Black, 4 Red, 5 Green, 8 Blue, 0 White with white cover LIGHTNING ROPE This 12-strand construction blends Vectran and Dyneema SK75 fibers into a reliable, lightweight line with very low stretch and no creep. It s great for use where static loads are anticipated and weight is an issue. It is available with black, red, green or blue Samthane coatings. Splicing Class II, 12-strand splice High strength-to-weight ratio Very low stretch Sold in 500 reels. 379007 379008 379012 379016 379020 379024 05030 05030 05030 05030 05030 05030 Size Avg Strength 7/64 1400 lbs 1/8 2100 lbs 3/16 5400 lbs 1/4 7900 lbs 5/16 13500 lbs 3/8 18500 lbs Replace in part number with colour code to choose line colour 2 Black, 4 Red, 5 Green, 8 Blue Cordage, Rigging & Sailboat Hardware 589 AMSTEEL LITESPEED With a double braid core made of 100 Dyneema SK-75 and a 24-strand cover braided from MFP, LiteSpeed is the floating version of WarpSpeed. It has similiar strength-stretch-weight profile, is extremely strong and durable, yet its MFP cover allows it to float. This line is perfect for light air sheets. Cover is yellow, black, red or blue with green tracers. Splicing Class II, double-braid High strength-to-weight ratio Very low stretch Floats Sold in 500 reels. 375016 05030 375020 05030 375024 05030 Size Avg Strength 1/4 4100 lbs 5/16 6200 lbs 3/8 9300 lbs Replace in part number with colour code to choose cover colour 2 Black, 4 Red, 1 Yellow, 8 Blue This efficient 12-strand construction of Samthane-coated Dyneema SK-60 fiber makes AmSteel an economical alternative to AmSteel-Blue. AmSteel is a nonrotational rope that yields high strength and low stretch equivalent to wire rope with one-seventh the weight. In addition, the product is flexible, easily spliced and resists flex-fatigue and abrasion. AmSteel is very slippery and will not hold well around cleats, stoppers and winches. Apply a polyester cover material to the area of the rope where it needs to be winched or cleated, and lock-stitch the cover to the core. Stock colours are blue and grey other colours available by special order. Splicing Class II 12-strand Easily spliced much like splicing 12-strand hollow braided ski rope Extremely lightweight Floats - will not absorb water Wire replacement Samthane UV coated Extremely low stretch Durable - outlasts wire rope For the high performance sailor Sold in 600 reels. Blue 870016806030 870020806030 870024806030 Grey 870016706030 870020706030 870024706030 Size Avg Strength Weight/100 1/4 7400 lbs 1.6 lb 5/16 10500 lbs 2.7 lb 3/8 15500 lbs 3.6 lb AMSTEEL-BLUE VALIDATOR II A 100 Vectran core gives Validator II both very high strength and absolutely no creep in static load applications. The 24-strand polyester cover protects the core from abrasion, handles easily, while performing well on winches and in stoppers. Colour-Match 24 A clever system for maintaining the colour coding of a line even when the cover has been stripped. Now you can finally strip the covers off your halyards and still easily distinguish one line from another without any special gadgets or hardware because the core is urethane-coated the same colour as the tracer colour in the cover. Cover colour is grey with your choice of black, red, green or blue tracers. Splicing Class II, double-braided No creep Excellent abrasion resistance Sold in 500 reels. 447016 447020 447024 447028 447032 Replace tracer 2 05030 05030 05030 05030 05030 Size Avg Strength 1/4 5000 lbs 5/16 7000 lbs 3/8 11000 lbs 7/16 15200 lbs 1/2 20000 lbs in part number with colour code to choose Black, 4 Red, 5 Green, 8 Blue A high-performance 12-strand single braid of 100 Dyneema SK-75 fiber, AmSteel-Blue yields the maximum in strength-to-weight ratio, very low stretch and is stronger than the same sized wire rope constructions - yet it floats. It s the highest strength single braid Samson makes. Samthane coating enhances an already high abrasion and cut resistance. AmSteel is very slippery and will not hold well around cleats, stoppers and winches. Adding a cover is recommended for areas handled by winch or rope clutches. Blue or grey. Splicing Class II 12-strand UV stabilized Stronger than wire Same elongation as wire Extremely light Floats Highly abrasion resistant Non-rotational Very low stretch Easily spliced Superior wear and flex fatigue Similar elastic elongation to wire rope Sold in 600 reels. Blue 872007806030 872008806030 872010806030 872012806030 872016806030 872020806030 Grey 872010706030 872012706030 872016706030 872020706030 872024706030 Size Strength Weight/100 7/64 1600 lbs 0.3 lbs 1/8 2500 lbs 0.5 lbs 5/32 4000 lbs 0.75 lbs 3/16 5400 lbs 1.0 lbs 1/4 8600 lbs 1.6 lbs 5/16 13700 lbs 2.7 lbs 3/8 19600 lbs 3.6 lbs 590 Cordage, Rigging & Sailboat Hardware PORTABLE ROPE CUTTER Easy finger pull operation. It makes quick clean cuts in all types of synthetic ropes, lines and strapping. Operates on120V AC power Panther Color Palette: 10/31/06 No color control, transfer function, color space, or color profile has been supplied by client and so no specific color space has been embedded in these files. It is the responsibility of the printer (or their pre-press shop) to achieve color approved by client. Color targets: Panther Logo. PMS Cyan Process Print Colors 75-7060 75-7061 Target Spot Colors Bright Yellow with a Red identification tracer line. 100 Olefin fibres. Highly visible, floats, excellent handling qualities, nontorquing. Non spliceable. Sold in 600 reels Dia. Avg. Strength 6MMFLT 9MMFLT 13MMFLT 16MMFLT 1/4 1700 lbs. 3/8 3200 lbs. 1/2 5200 lbs. 5/8 7400 lbs. PMS Yellow PMS Black Violet 2X CVU PMS Black Rope cutter TM By MarineTech MFP BRAIDED FLOAT LINE PMS Magenta Replacement blades DIAMOND BRAID MONOFILAMENT POLYPROPYLENE HOLLOW BRAID Perhaps the most practical and inexpensive synthetic rope on the market. Its hollow core is easy to splice. The fiber is treated with UV stabilizers for sunlight durability. 12 strand premium construction. Floats. Sold in 500 reels. UNI14X500HB UNI516X500HB UNI516X1000HBBL/WH UNI38X500HB UNI12X500HB Replace in part number with colour code Black BK , Blue/White BL/WH MFP FLOAT LINE Yellow with a Red tracer UNI38X500MFPYL 3/8 x 500 n o e 3 STRAND POLYPROPYLENE JUMBO REELS Replace in part number with colour code where applicable Blue BP, Yellow YP Size Reel size 3 STRAND TWISTED POLYPROPYLENE Polypropylene is light, it floats and is highly resistant to most chemicals. Very low stretch. Spliceable. Colour Size Reel size UNI316X1200YP Yellow 3/16 1200 UNI316X1200WP White 3/16 1200 UNI14X600YP Yellow 1/4 600 UNI14X600WP White 1/4 600 UNI516X600YP Yellow 5/16 600 UNI516X600WP White 5/16 600 UNI38X600YP Yellow 3/8 600 UNI38X600WP White 3/8 600 UNI12X600YP Yellow 1/2 600 UNI12X600WP White 1/2 600 UNI58X600YP Yellow 5/8 600 UNI58X600WP White 5/8 600 UNI34X600YP Yellow 3/4 600 UNI34X600WP White 3/4 600 316X2125YP 14X1310 516X975YP 38X630YP 12X335 34X125YP n o 3/16 2125 1/4 1310 5/16 975 3/8 630 1/2 335 3/4 125 e POLYPROPYLENE Monofilament polypropylene is the lightest, most widely used, most economical rope on the market. Strength is far greater than Manila. Other characteristics are long life, ease of handling, flexibility in cold temperatures, excellent resistance to most acids and alkalis and very good impact loading. And it floats. Replace in part number with colour code Blue BP, Yellow YP Size Coil size 14X1200 516X1200 12X600 58X600 34X600 1X600 1/4 1200 5/16 1200 1/2 600 5/8 600 3/4 600 1 600 Cordage, Rigging & Sailboat Hardware SOLID BRAID NYLON CORD This is an excellent general purpose line for recreational and Marine-Industrial use. The choice for flag halyards, life line, sail cover lacing and starter cord. A must for rope lockers. Sold in 1000 reels. 580006010020 580008010020 580010010020 580012010020 580014010020 3/32 1/8 5/32 3/16 7/32 SOLID BRAID NYLON Made from 100 multifilament nylon with a round construction. Non-spliceable. Abrasion and chemical resistant. Available in black or white. Sold in 1000 reels. UNISC3 UNISC3BK UNISC4 UNISC4BK UNISC5 UNISC5BK UNISC6 UNISC6BK UNISC7 White 3/32 Black 3/32 White 1/8 Black 1/8 White 5/32 Black 5/32 White 3/16 Black 3/16 White 1/4 591 LASH-IT & ZING-IT Made from Dyneema fiber, this twine yields the highest strength, lightest weight, lowest stretch and longest wear life available. The proprietary urethane coating Samthane adds to the twine’s wear life, ensures the knot-holding capability of the twine, and gives the twine its distinctive gray color Convenient packaging Extremely light weight Samthane UV coating Extremely low stretch Outlasts wire rope Size 811017701850 811017101850 811017706050 811022701850 811022101850 Strength Colour 1.75mm 1/16 x 180ft 500 lbs Grey 1.75mm 1/16 x 180ft 500 lbs Yellow 1.75mm 1/16 x 600ft 500 lbs Grey 2.2mm 3/32 x 180ft 650 lbs Grey 2.2mm 3/32 650 lbs Yellow x 180ft 7 WAXED POLYESTER SAILMAKER’S TWINE 100 continuous filament pre-waxed twine, individually wrapped in clear plastic with one 15 sewing needle. For whipping, stitching, repairing canvas and synthetic fabrics. 4 oz. 7PB4 7PW4 Brown White 3 WAXED POLYESTER SAILMAKER’S TWINE SOLID BRAID POLYESTER As one of the most durable man-made fibers, polyester offers minimal shrinkage and very low stretch. Non-spliceable. Abrasion and chemical resistant. Available in black or white. Sold in 1000 reels. UNIPC3 UNIPC3BK UNIPC4 UNIPC4BK UNIPC5 UNIPC5BK UNIPC6 UNIPC6BK White 3/32 Black 3/32 White 1/8 Black 1/8 White 5/32 Black 5/32 White 3/16 Black 3/16 MINI BRAID ACCESSORY CORDS Strength characteristics for a free running, torque-free cord. Applications include one design, small boat, and dinghy running rigging, lacing bimini tops, trampoline lacing and many other uses. Sold in 300 reels. 480020203030 480030203030 480040203030 480050203030 Size Min. Strength 2mm 230 lbs 3mm 600 lbs 4mm 1000 lbs 5mm 1200 lbs 100 continuous filament pre-waxed twine, individually wrapped in clear plastic with one 15 sewing needle. 1 oz available only on cards of eight MBB4 MBW4 3MB-C 3MW-C 3MBCO-1 4 oz Brown 4 oz White 1 oz Brown, 8/card 1 oz White, 8/card 1 oz coloured, 8/card Black, Blue, Brown, Green, Grey, Orange, Red & Yellow per card MANILA ROPE Made from the finest Philippine natural fibers, lubricated to increase resistance to abrasion and wear, and to retard water absorption which is a major cause of rot and mildew. Manila has less stretch than synthetic ropes. Size Reel size 14X1200MAN 38X600MAN 12X600MAN 58X600MAN 34X600MAN 1X600MAN 1/4 600 3/8 600 1/2 600 5/8 600 3/4 600 1 600 TARRED MARLIN Heavy tarred marlin. 5 lb roll. Polished 2 ply TARMARL5 The industry standards are set by Forespar’s ® complete line of hiking sticks with designs and lengths to satisfy every sailor. Our telescoping models offer a choice of three excellent fastening devices: TFP (Quick-Release); SF (Sta-Fast ™); and SL (Speed-Lock) our new composite universal. 592 Cordage, Rigging & Sailboat Hardware A long time favorite of serious sailors around the world, the TFP (Quick-Release) model can be instantly fastened to the tiller by simply depressing the plunger and inserting the detent pin into the special tubular fitting supplied. Again, an easy push on the plunger and the hiking stick is released from the tiller. Stow it or take it home with you. It’s fast, simple and secure. Quality & Performance TILLER CLIPS TFP QUICK RELEASE with designs and lengths to satisfy every sailor. OCEAN RACER posite universal. Molded of Marelon ® for exceptional strength. TILLER EXTENSION EXTENDS Infinite lock positions StaFAST ™ THE ULTIMATE RACER'S ase) model can be instantly fastened to quick the tillerrelease byCHOICE. Stainless steel TFP universalFROM joint HERE bular fitting supplied. Again, an easy push on the White powder-coated anodized aluminum with you. It’sPart fast, No. simple Model and secure. New composite cam Comfortable gripNo. Telescopes Tube Dia. locks give our time 104016 TFP-S 19" to 32" 3/4” - 5/8” Telescopes 31 to 41 27" to 48" 104017 TFP-M 3/4” - 5/8” StaFAST ™ te cam r time ock tiller crisp, while ng with a he wrist. e WIDTH tested twist lock tiller 105110 STX 30" Fixed FSP106025 Double-grip with3/4” TFP quick release end a crisp, extensions 105120 STX 36" Fixed 3/4” FSP106225 with3/4” Sta-FAST option positive bite while 108100 19" to 32" - 5/8” TILLERSF-S CLIPS Double-grip 108101 27" to 48" strength. 3/4” - 5/8” freely unlocking with a Molded of SF-M Marelon ® for exceptional quick turn of the wrist. StaFAST ™ END FITTING (SF) Patented design holds the tiller extension exactly where you leave it. No more sliding down out of reach (not sold separately). ADJUSTABLE FOR TENSION BALL END & GOLF GRIP SWIVEL STICK Forespar s economical fixed length tiller extension is now a better value. Part No. Model No. Size Featuring removable Speed Lock SL polyester elastomer universal 941020 MF-671 3/4" Tubing Clip end fitting mounted on7/8" rugged 5/8 dia. black anodized aluminum tubing 941021 MF-672 Tubing Clip with rubberMF-673 ball end or1"golf grip 941022 Tubing Clipstyle handle. For the small boat 941023 MF-674 1-1/8" Tubing Clip up to 22 maximum sailor. FSP102000 18 ball end FSP102001 24 ball end TFP QUICK RELEASE FSP102002 30 ball end FSP102003 36 ball end FSP102008 FSP102004 FSP102005 FSP102006 18 golf grip 24 golf grip 30 golf grip 36 golf grip StaFAST ™ Model No. SizeSECURING Part No. STX & SF MF-671 SCREWS 941020 3/4" Tubing Clip 941021 MF-672 941022 MF-673 941023 MF-674 5/16” X 2-1/2” bolt 7/8" Tubing Clip 1" Tubing Clip 1-1/8" Tubing Clip CLAMP NUT LEAVE ONE HAND WIDTH Part No. 104004 TFP Assembly Complete With Socket 104006 TFP Socket (receptacle only) TFP Quick Release TFP QUICK RELEASE TILLER LOCK BOX — TLB Sta-FAST This inexpensive product turns any boat with a ball-grip Forespar ® tiller extension into a boat with a simple, effective and adjustable tiller lock. Install one into your cockpit coaming and you have it in minutes! Cut-out dimensions : Part No. 3-3/8"w X 4-3/4"h X 1-1/2"d. TWIST-LOCK TILLER EXTENSIONS 104004 TFP Assembly Complete With Socket 104006 TFP Socket (receptacle only) Part No. Model No. 100000 TLB 26 BIG STICK VISIT OUR WEBSITE • TILLER EXTENSIONS The industry standards are set by Forespar s complete line of hiking sticks with designs and lengths to satisfy every sailor. Our telescoping models offer BOAT a choice of three excellent fastening devices LOCKS YOUR TFP Quick-Release SF Sta-Fast and SL Speed-Lock our ON COURSE! new composite universal. A long time favourite of serious sailors around the world, the TFP Quick Release model can be instantly fastened to the tiller by simply depressing the plunger and inserting the detent pin into the special www.forespar.com tubular fitting supplied. A rugged lightweight shaft of Kevlar /carbon composite. The shaft provides a solid grip for dinghy and keel boat sailors. The universal polymer end fitting is Forespar s proven Speed-Lock LOCKS YOUR BOAT design for quick mount/dismount and easy replacement. Units are ON COURSE! shipped in kit form. The inboard end is loose for custom lengths to suit your class requirements. Simply cut the tube to length and epoxy the Speed-Lock fitting onto the end of the tube. Epoxy kit supplied. www.forespar.com FSP102214 30 long, 7/8 OD Big Stick FSP102217 FSP102223 48 long, 7/8 OD Big Stick FSP104016 FSP104017 FSP105110 FSP105120 FSP108100 FSP108101 FSP102117 Model 19 to 32 TFP-S 27 to 48 TFP-M Fixed 30 STXE-30 Fixed 36 STX-36 19 to 32 SF-S 27 to 48 SF-M Replacement Speedlock Universal end fitting 72 long, 1-1/4 OD Giant Stick TILLER TAMER Like having an extra crew member TILLER LOCK BOX - TLB This inexpensive product turns any boat with a ball grip Forespar tiller extension into a boat with a simple, effective and adjustable tiller lock. Install one into your cockpit coaming and you have it in minutes Cutout dimensions 3-3/8 W x 4-3/4 H x 1-1/2 D. FSP100000 Maintains cruising course Retains full cockpit space Provides smooth adjustable tension from fully locked to fully free. Equally adaptable to outboard and inboard rudder tillers. Does not interfere with automatic steering systems Ends the need for lashing of the tiller when boat is moored, in a slip, or on a trailer. DAV2205 Cordage, Rigging & Sailboat Hardware 593 PATENTED LINECONTROL WHISKER POLES LineControl is only available on Forespar whisker poles. The system is simple, and makes the extension and retraction of poles quick and easy. And most amazing of all ... the entire operation can be executed while being positioned at the mast. It is no longer necessary to go forward to adjust buttons of any kind - simply uncleat the line and extend or retract. It s quick and easy even with the largest poles. Topping lifts are available on all whisker poles. Attachment to outer end is with end fittings jaw facing down. CRANK OUT LINECONTROL WHISKER POLES A standard winch handle locks into a socket to adjust the length of the pole. FSP401106 FSP401107 FSP402200 FSP402201 FSP403200 FSP403202 FSP800800 FSP405200 FSP405201 FSP800801 End fittings Recommended Collapsed Max. work Tubing Inbrd/Outbrd mast fittings length/weight length dia. EL/UXP PE-3SC, RC-125, FC-125 121.75 /17 lbs 218.13 2 & 2-1/2 EL/UTR PE-3SC, RC-125, FC-125 121.75 /17 lbs 218.13 2 & 2-1/2 UXP/UTR RC-125, FC-125 148.50 /27 lbs 265.25 2-1/2 & 3 UTS/UTR T-125, AT-125 148.50 /28 lbs 265.25 2-1/2 & 3 UXP/UXP RC-125, FC-125 162.00 /38 lbs 272.00 3 & 3-1/2 UTS/UTR T-125-S 162.00 /39 lbs 272.00 3 & 3-1/2 UTS/UTR T-125, AT-125 162.00 /24 lbs 272.00 3 & 3-1/2 UTS/UXP T-125-S 182.00 /58 lbs 324.00 3-1/2 x 4 UTS/UTR T-125-S 182.00 /58 lbs 324.00 3-1/2 x 4 UTS/UTR T-125, AT-125 182.00 /32 lbs 324.00 3-1/2 x 4 Outboard ends Inboard ends SMALL TELESCOPING POLES TWIST LOCK Telescoping models can be adjusted to any desired length and securely locked in position with an effortless twist of the inner tube. All small poles include strong corrosion-free nylon end fittings and a Mast Pad Eye with stainless steel screws. FSP404000 FSP404100 FSP406000 FSP406100 FSP404011 Telescoping 4-8 1 dia. For boat to 16 latch/spike Telescoping 4-8 1 dia. For boat to 16 latch/latch Telescoping 6-12 1 dia. For boat to 22 latch/spike Telescoping 6-12 1 dia. For boat to 22 latch/latch Pad eye only Outboard ends Inboard ends HEAVY DUTY TELESCOPING POLES TWIST LOCK These telescoping whisker poles are heavy duty two section and three section aluminum spars which can be extended to lengths up to 15 and securely locked in position by an internal twist lock device. Poles feature self-latching fittings on the inboard and outboard ends. End fittings are hard anodized aluminum alloy for superior strength. PE-2A Mast Pad Eyes are recommended . Now available with Ultra Series end fittings. FSP406300 Two sections extending from 79 to 138 1-7/8 outer tube diameter. With self-latching fittings on both ends / 8 lbs. For boats to 25 594 Cordage, Rigging & Sailboat Hardware STANDARD SPINNAKER POLES DETERMINING POLE LENGTH Standard spinnaker poles have a double bridle topping lift/foreguy system. Unless otherwise specified, all standard poles are supplied with the throat jaw facing upward. Note Spinnaker poles are custom ordered please call for lead times. FSP304001 FSP304002 FSP304003 FSP304004 FSP304005 FSP304006 FSP304007 FSP304008 FSP304009 FSP304010 FSP304011 FSP304012 The length of your spinnaker pole is determined by your yachts J measurement. This is roughly the straight line distance from the front of the mast at deck level to the headstay. The J measurement is available from your sailplan. Two UXP fittings, 9 6 approx., 2 dia. One UXP, one UTR fitting, 9 6 approx., 2 dia. Two UTR fittings, 9 6 approx., 2 dia. Two UXP fittings, 11 6 approx., 2-1/2 dia. One UTR, one UXP fittings, 11 6 approx., 2-1/2 dia. Two UTR fittings, 11 6 approx., 2-1/2 dia. Two UXP fittings, 13 6 approx., 3 dia. One UTR, one UXP, 13 6 approx., 3 dia. Two UTR fittings, 13 6 approx., 3 dia. Two UXP fittings, 15 5 approx., 3-1/2 dia. One UTR, one UXP fitting, 15 5 approx., 3-1/2 dia. Two UTR fittings, 15 5 approx., 3-1/2 dia. MOUNTED POLE CHOCKS These chocks are moulded from durable, weather resistant urethane. Chocks are sold individually. Two chocks are needed for each pole. For spinnaker or whisker poles. Ideal for reaching struts. Stanchion Mount - fits 1 stanchions FSP300050 FSP300042 FSP300043 FSP300044 For 2 dia. pole FSP300070 FSP300071 FSP300072 For 2 dia. pole For 2-1/2 dia. pole For 3 dia. pole For 3-1/2 dia. pole Mast Mount - curved base For 2-1/2 dia. pole For 3 dia. pole AUTOMATIC SOCKET END This unique socket type fitting automatically locks TS Style onto the mast toggle pin with a quick and easy push. The release is just as quick with a press of the lever. TS & UTS. Pole Pole Fits tube Weight model no. dia. I.D. w/o trip FSP309028 TS-300-EF 3.0 2.835 1lb 10oz FSP304080 UTS-300-ULTRA 3.0 2.835 1lb 4oz FSP309031 TS-350-EF 3.5 3.260 1lb 13oz FSP304081 UTS-350-ULTRA 3.5 3.260 1lb 7oz FSP405006 TS-400-EF 4.0 3.750 2lb 2oz FSP309036 TS-450-EF 4.5 4.260 2lb 13oz FSP304082 UTS-400-ULTRA 4.0 3.750 1lb 7oz FSP304083 UTS-450-ULTRA 4.5 4.260 1lb 7oz 300002 300029 DECK CHOCKS 300028 Used to stow spinnaker poles or whisker poles on the deck. Models 300028 and 300029 are constructed of high quality stainless steel. They have been designed for rugged use with aluminum as well as our Ultra Series end fittings, while also offering an almost snag-proof profile on deck. FSP300002 FSP300028 FSP300029 For XP, TR or EL end, marelon For TS socket end stainless steel Designed for high strength, very low weight and resistance to wear and corrosion the Ultra Series composite end fitting is perfect for aluminum or carbon fibre spinnaker poles and whisker poles. The Ultra Series is the sailor s choice for inshore and offshore racing and cruising. Available with or without triggers. Maximum recommended boat LOA is 43 . For Grand Prix end for XP,TR,GPS or GP ends stainless steel PE-3SF & PE-3SC PAD-EYES To compliment the medium size whisker poles, Forespar designed the stainless steel PE-3SF & PE-3SC mast pad eyes. Measuring 2-3/4 x 2 , both pad-eyes have inside ring diameters of 1-5/8 . FSP400001 FSP400002 FSP400012 ULTRA SERIES POLE END FITTINGS PE-3SF pad eye, s/s flat base PE-3SC pad eye, s/s curved base PE-3SF w/gusset s/s flat base FSP304054 FSP304050 FSP304060 FSP304051 FSP304061 FSP304052 FSP304062 FSP304053 FSP304063 UXP external trip UTR internal trip For pole Model no. Fits Dia. End End Fitting Fitting Tube I.D. Length Weight UXP-150-EF 1.5 1.370 2.750 6.97 oz UXP-200-EF 2.0 1.870 2.750 6.97 oz UTR-200-EF 2.0 1.870 2.750 6.97 oz UXP-250-EF 2.5 2.334 3.125 9.25 oz UTR-250-EF 2.5 2.334 3.125 9.25 oz UXP-300-EF 3.0 2.835 3.000 11.92 oz UTR-300-EF 3.0 2.835 3.000 11.92 oz UXP-350-EF 3.5 3.260 3.625 15.72 o UTR-350-EF 3.5 3.260 3.625 15.72 oz 595 Cordage, Rigging & Sailboat Hardware RING STYLE MAST CAR - RC125 Car is investment cast of 17-4 heat treated stainless steel to provide a superior product. Compatible with our UXP and UTR pole end fittings. Ring I.D. is 1.625 . For 1.250 T-track and has a screw lock-pin, our special UHMW polyethylene slides inserts and provisions for up and down shackles. Does not fit Lewmar T-track YACHT ROD The high performance spring loaded mechanical boom vang. Excellent vang/boom support for performance cruising and racing. White powder coated aluminum & polished stainless steel. Supplied with spectra cable ready to add to your tackle system. Your 4 1 equals 8 1 when installed on Yacht Rod. Spring return holds boom. Brackets for mast and boom sold separately. Eliminates need for boom topping lift Supports boom in light air and when reefing and lowering the mainsail Faster than hydraulics - no messy hydraulics to leak More efficient than conventional tackles Precipitation hardened stainless steel spring with fast-pin adjustment rated for over 1 million compressions. FSP352000 FSP352100 FSP352101 Stroke 7” 11-1/2” 11-1/2” Pin to Pin min 58-1/2” 66-1/2” 79-1/2” Pin to Pin max 70-1/2” 80” 93” Max return force 600lbs 1450 lbs 1450lbs FSP352000 YR for boats 34-40’ FSP352100 YR for boats 41-45’ FSP352101 YR for boats 46-55’ FSP352003 Boom fitting for YR-M FSP352103 Boom fitting for YR-L & YR-XL FSP352005 Mast fitting for YR-M FSP352104 Mast fitting for YR-L & YR-XL SHACKLE GUARDS Place a protective buffer between the spinnaker pole ends and your after-guy shackle. Made of high-strength polyurethane, these tough polymer guards are UV inhibited for long lie. Shackle Guards can also be used on lifelines to skirt genoas. FSP300006 SG-1 White 2-1/4” Dia x 3/8” ID FSP300007 SG-2 White 2-1/4” Dia x ” ID FSP300008 SG-3 White 3” Dia x ” ID FSP300009 SG-4 White 3” Dia x 5/8” ID FSP300086 SG-2 Red 2-1/4” Dia x ” ID FSP300091 SG-2 Green 2-1/4” Dia x ” ID FSP331000 HEAVY DUTY CAR - FC-125 Allows both vertical and horizontal movement while eliminating undesirable twisting motion of the spinnaker pole. The car slide is high strength, hard anodized aluminum alloy. The pole acceptance jaw is stainless steel. Fits 1-1/4 T-track. Recommended for UTR and UXP type spinnaker pole ends. Does not fit Lewmar T-track FSP332002 VERTICAL POLE STORAGE CAR VPC-125 Retains the upper end of the stowed pole on the mast centerline. The chock slides on the track and eliminates rattle. Fits 1-1/4 track. FSP335100 For 2.5 poles FSP335101 For 3 poles FSP335102 For 3.5 poles MAST MOUNTED CHOCKS Molded from durable high tech urethane, these chocks allow for stowing the pole vertically against the face of the mast. Two MPC chocks 2-3 feet apart will help stop the pole from rattling. Curved base FSP300071 For 2.5 poles FSP300072 For 3 poles FSP300073 For 3.5 poles A SPREADER BOOTS SAIL SAVER JIB ROLLER Sold in pairs, these light weight, easily installed rollers can be used on the spreader tips or life lines to help skirt the foot of the jib. Sail Savers can also be used on backstays of catamarans or other boats with large roached mainsails. Centre hole is 3/16 and can be drilled out to 3/8 maximum. 2-3/4 dia. FSP210020 B C These UV stabilized rubber spreader boots will protect your sails from chafe damage. 560103 560105 560106 A Wire size B C 4-5/8 1/8 1 5-3/4 3/16 1-3/8 7-1/2 1/4 2-1/8 596 Cordage, Rigging & Sailboat Hardware RIP STOP SAIL REPAIR TAPE For emergency use on sails. Provides on the spot repairs. Adheres instantly on contact. Conforms to the shape of the sail. Prevents against sail chafe. 2 x 15 RE1140 RE1141 RE1142 RE1143 RE1144 RE1145 White SCRIMTAC EMERGENCY SAIL REPAIR TAPE For quick strong emergency repairs. Black RE1183 RE1185 Red Blue 3” x 15’ 6” x 15’ Green Gray SELF AMALGAMATING RIGGING TAPE SPINNAKER REPAIR TAPE This self adhesive ripstop nylon tape is ideal for reinforcing batten pockets and carrying out temporary repairs to torn sails. 2” x 15’ PSP100FY PSP100OR PSP100RD PSP100WH PSP100DKGN PSP100BK PSP100LTBL Flourescent yellow Orange Black Light Blue 1” x 32’ White RIGGING TAPE Rigging Tape protects against chafing and sharp edges while providing extraordinary safety for sails, lines and rope ends. RE3866 RE3867 RE6450 Black, 1 x 15 , Self amalgamating White, 1 x 15 Self amalgamating White, 1 x 66 Adhesive 4” x 6’ MYLAR REPAIR TAPE 2” x 10’ 25 micron 6” x 10’ 50 micron KEVLAR TAPE SAIL REPAIR Self-adhesive, Kevlar scrim, encapsulated in Mylar film. Ideal for repairs to Kevlar and high-performance sails. Excellent resistance to tearing in any direction. Super aggressive UV adhesive for long lasting repairs. RE1164 3/4” x 32’ White White Green Remove the white release liner to expose a transparent repair tape for semi-permanent repairs to sail windows and mylar sails. UV and salt water resistant. Available in clear only. PSP300-50 PSP300-150 PSP600-1910WH PSP600-2510WH Red HEAVY DUTY SAIL REPAIR TAPE PSP200-100 A non-adhesive tape with a protective release liner which bonds to itself and not your fittings. Ideal for rigging screws, terminals, on-deck electrics and emergency hose repairs. 3” x 4.92 SPREADER TAPE This soft, waterproof spreader tape is ideal for capping crosstree ends to reduce chafing of sails. 1”x33’ PSP400WH PSP400BK White Black MASTBOOT Installing Mastboot does not require unstepping the mast. It bonds itself into a solid piece of rubber offering protection against moisture. It conforms to irregular surfaces and leaves no sticky residue. RE3940 RE3941 4”W x 40”L 4”W x 100”L SAIL PATCH REPAIR TAPE Excellent resistance to tearing in any direction, very aggressive adhesive, works on damp sails. Transparent colour suitable for any sail. Tape is lightweight and flexible. 3” x 15’ RE3843 ST6017 Shelf talker 8 rolls MAST COLLAR TAPE A self bonding waterproof collar which does not require un-stepping the mast when fitting. 4”x5’ White. PSP500WH Cordage, Rigging & Sailboat Hardware WINDEX 10 SPORT The Windex 10 is designed for simple accurate operation. It is designed for masthead mounting in most dinghies, smaller boats and sport boats. DAV3120 DAV3101 Sapphire suspension bearing, 15 vane 38cm and adjustable tacking arms with tabs. Vane and tabs feature reflectors for high visibility day and night. Stands 12.75 32cm tall. The Windex AV allows the Windex 15 wind vane to be mounted onto a standard size of VHF or AM/FM whip antenna. Reduces weight and windage aloft by combining two installations into one. Complete with Windex 15 and all components necessary for quick and easy installation. Antenna not included. Spare vane SPAR-FLY Combines needle bearing balance, high impact plastic, and marine grade metals for unsurpassed sensitivity and durability. Spoiler holes in the vane reduce lift and increase accuracy. Comes equipped with both the top mount fitting and the quickrelease side mount. DAV1310 DAV1311 Designed for catamarans. Comes with 8 vane, adjustable tacking arms and mounting hardware. DAV1450 DAV1451 DAV1452 Hobie 18 adapter Spare vane BLACK MAX WIND INDICATOR A versatile wind indicator that attaches quickly to masts and booms on most dinghies. Adjusts to fit 1-1/2 to 2-1/2 masts or booms. DAV1295 Spare Vane WINDEX AV DAV3160 DAV3161 TELO-CAT Spare Vane WINDEX 15 DAV3150 DAV3151 Spare vane DELUXE UNIVERSAL MASTHEAD MOUNT WIND-TELS Port and starboard colored tales mount on any shroud sizes up to 3/8 10mm . Made of stainless steel and marine grade metal parts. 2 per package DAV1260 AIR-FLOW TELS The Air-Flow Tels are made out of rip stop nylon and easily attach to sails. No holes required. Tels show the air flow across the sail. They allow you to trim sails for maximum performance. Full instructions included. Red and green. 14 per package. DAV0950 NEWPORT TELL-TALE A practical sailing aid which gives excellent service in light or heavy winds. Easily attaches without tools. Each package contains two stays with full instructions and two replacement tails. DAV0221 DAV0222 DAV0223 Fits 1/8 wire Fits 3/16 wire Fits 1/4 wire Extends Windex 10 and 15 away from masthead obstructions. Length 13 . DAV1705 WINDEX LIGHT For viewing Windex Indicators at night. Waterproof and non-corroding silver parts give long-life light at just 120ma current draw. Fits under Windex 15, Windex 10 or J base mounting socket. Uses 1467 bulb. DAV3200 597 CLINOMETER Black ABS plastic. Reads 0-45 . INC-45 598 Cordage, Rigging & Sailboat Hardware The Rigging Solution of Lewmar Marine Fiber Systems | Rod Systems | Wire Systems | Hardware | Hydraulics N551 N555 N546 N640 N841 N741 N639 N641 WIRE SWAGE TERMINALS Navtec swage terminals are crafted from premium 316 stainless steel for maximum corrosion resistance and are used to terminate 1 x 19 stainless steel wire, flexible wire rope, and Dyform wire. Available in many sizes. Series N546 Swage Eye - traditional wire end terminal N551 Swage Toggle Fork - traditional toggle end terminal N555 Swage Stud - with UNF threads N741 Swage T - traditional T terminal N743 T Rings - enable fibre rope to connect to spars through a T terminal backing plate N639 Stemball Eye - used as a toggle in some headstay and backstay applications N640 Stemball Cup - used with N641 Stemballs to increase head diameter N673 Swage-Toggle - open body swage and toggle with chrome bronze body N674 Blank-Toggle - open body blank and toggle with chrome bronze body N841 Swage shroud terminal N641 Swage stemball N743 N673 N674 PLEASE CONTACT OUR SALES DEPARTMENT FOR FURTHER INFORMATION 599 Cordage, Rigging & Sailboat Hardware NORSEMAN SWAGELESS TERMINALS Norseman terminals strength is in their ability to provide a fast, secure rigging solution. They offer a strong end fitting on all types of wire and have earned an international reputation for quality, efficiency, versatility, reliability and safety at sea. Ease of use in the field allows for owner-installation both at the dock and underway for emergency repairs. The only choice in the harsh tropical conditions that rapidly degrade swaged fittings. Norseman terminals can be re-used, but a NEW cone must be installed. N030 SWAGELESS FITTING METHOD No special tools required. Slip the body of the terminal over the diameter of the cable. Unlay outer wires and fit the cone over the centre core. Re-lay the outer wires into the head of the fitting. Draw the body up to the head and screw together. Swageless terminal also available in T and shroud terminals. Swageless fittngs and cones available for 1X19, 7 strand and Dyform wire. N060 Swageless stud terminal Swageless stemball terminal N030L N010 Swageless long stud terminal Swageless eye terminal N020 Swageless fork terminal NORSEMAN AERIAL RIGGING INSULATORS For converting high tensile yacht rigging into antennae for transmissions and reception, Norseman Insulators provide a completely secure method of converting yacht backstays into aerials. They have been approved by Lloyd s for many years and the Norseman Insulator is recommended by leading marine electronic distributors. Insulators are manufactured from marine stainless steel to specification 316 stainless steel for the end fittings, an approved insulant, and anodised high strength aluminum. Fully tested in an approved environmental laboratory, electrical performance was found satisfactory after exposure to salt spray and to 95 relative humidity at 35 C for four periods of seven days. WIRE SIZE mm 5 6 7 8 10 11 12 14 16 19 in 3/16 7/32 1/4 9/32 5/16 3/8 7/16 1/2 9/16 5/8 3/4 L0 mm 152 152 165 165 165 185 191 365 365 277 277 277 381 406 487 L1 in 5.984 5.984 6.496 6.496 6.496 7.283 7.520 14.370 14.370 10.906 10.906 10.906 15.000 15.984 19.173 mm 178 178 178 198 198 216 229 308 308 341 341 341 473 479 549 L2 in 7.01 7.01 7.01 7.80 7.80 8.50 9.02 12.13 12.13 13.43 13.43 13.43 18.62 18.86 21.61 mm 190 190 190 203 203 222 254 346 346 362 362 362 465 499 563 L3 in 7.48 7.48 7.48 7.99 7.99 8.75 10.00 13.63 13.63 14.25 14.25 14.25 18.31 19.65 22.17 mm 211 211 211 229 229 241 262 308 308 401 401 401 514 552 610 L4 in 8.31 8.31 8.31 9.02 9.02 9.49 10.32 12.13 12.13 15.79 15.79 15.79 20.24 21.73 24.02 mm 220 220 220 238 238 271 283 402 402 443 465 465 607 638 753 L5 in 8.66 8.66 8.66 9.37 9.37 10.67 11.14 15.83 15.83 17.44 18.31 18.31 23.90 25.12 29.65 mm 290 290 290 315 315 360 376 510 510 598 640 640 820 844 999 OW in 11.42 11.42 11.42 12.40 12.40 14.17 14.80 20.08 20.08 23.54 25.20 25.20 32.28 33.23 39.33 mm 29 29 29 29 29 35 35 44 44 44 44 44 63 63 63 H in 1.14 1.14 1.14 1.14 1.14 1.37 1.37 1.73 1.73 1.73 1.73 1.73 2.50 2.50 2.50 mm 10 10 11 11 11 13 16 16 16 19 19 19 23 26 29 T in 0.38 0.38 0.44 0.44 0.44 0.51 0.63 .063 0.63 0.76 0.76 0.76 0.89 1.01 1.14 PLEASE CONTACT OUR SALES DEPARTMENT FOR FURTHER INFORMATION mm 8 8 10 10 10 11 13 17 17 18 18 18 21 24 26 in 0.31 0.31 0.37 0.37 0.37 0.43 0.49 0.65 0.65 0.71 0.71 0.71 0.83 0.94 1.01 RiggingBackstay & Sailboat Hardware 600A370Cordage, Hydraulic Integral Adjuster Ergonomics meets economics. The new Navtec Series 9 Integral incorporates several key design features while keeping to the high marine standard that Navtec is known for. The Series 9 design moves the hydraulic feed tube inside to give the unit a sleek look. The pump piston size has been increased to ½” to increase flow, which produces the faster action needed for today’s modern mast. The Integral is designed to be used with the Integral Toggle. Available with a black or a clear finish. STROKE THE INTEGRAL BACKSTAY ADJUSTER ROD n CLEVIS PIN n 10.75 CLEVIS GAP Ergonomics meets economics. The new Series 8 Integral Backstay Adjuster incorporates several key design improvements. The pressure gauge is positioned prominently, enabling fast, accurate reading of tension values. A longer pump handle produces faster pumping motion and more tension per stroke, which delivers greater performance out of modern masts. The feed tube is seated into the contour of the cylinder, resulting in a more secure design and integrated look, and its cost has remained highly competitive. In testing, the Navtec Series 8 Integral enabled sailors to increase rigging tension quickly, precisely and easily. With each stroke of the handle, rake increased along with forestay tension, resulting in improved roller furling gear performance, sail shape, windward performance and speed. Use of the specifically designed Integral toggle is strongly recommended. LENGTH CLOSED PART NUMBER MAX PULL FORCE @ RELIEF lbs LENGTH CLOSED kg in LENGTH OPEN mm in WEIGHT mm lbs MAX WIRE SIZE kg in mm A370-BLE-006 3,500 1,590 31.1 790 44.6 1133 7.0 3.18 7/32 5.6 A370-BLE-010 5,400 2,450 31.1 791 44.6 1134 7.3 3.31 9/32 7.1 A370-BLE-012 6,500 2,950 33.5 850 47.8 1213 12.2 5.53 5/16 7.9 A370-BLE-017 8,700 3,950 33.5 850 47.8 1213 12.2 5.53 3/8 9.5 A370-BLE-022 11,100 5,030 35.5 902 50.5 1283 15.5 7.03 7/16 11.1 PART NUMBER PISTON ROD DIAMETER in Backstay Toggle CLEVIS PIN & GAP mm in PART NUMBER** mm A370-BLE-006 9/16 14 7/16 11.1 A370-BLE-010 9/16 14 1/2 12.7 LENGTH PIN-PIN in mm A371-20A06 2.00 50.8 A370-BLE-012 5/8 16 5/8 15.9 A371-20A10 2.00 50.8 A370-BLE-017 5/8 16 5/8 15.9 A371-20A17A 2.33 59.2 A370-BLE-022 3/4 19 3/4 19.1 A371-20A22 2.98 75.7 The A370 is supplied as standard with a black finish. To order a clear finish, please replace the -BLE in the part number with -CLE. Integral Backstay Adjuster assembly includes handle, clevis pins and bushings (-6). * Max relief setting is 4,000 psi, except for -6 and -12, which are 3,000 psi. ** -12 & -17 Cylinders use the A371-20A17A toggle. 72 www.navtec.net BACKSTAY ADJUSTERS Backstay adjusters allow optimization rigging and sail performance. Models with handles are comfortable to operate and allow greater on board access. For small units, the wheel model offers an outstanding quality-price ratio. WIC5526 WIC5536 WIC5565 WIC5568 Length Pin to pin Open / Closed Pin Dia Funct Inch lbs Wire size AdjustmentType Wheel/ Ratchet/ Handle 13-3/4” / 20-1/2” 1/2” 6173 1/4”-9/32”-5/16” WHEEL 13-3/4” / 20-1/2” 1/2” 6173 1/4”-9/32”-5/16” HANDLE 17-5/16” / 26” 1/2” 7055 1/4”-9/32”-5/16” RATCHET 19-7/8” / 29-3/4” 5/8” 12346 5/16”-3/8” RATCHET Wheel BABYSTAY ADJUSTERS For fitting a jib, setting up a genoa or a solent jib, and so forth. Both for safety and performance reasons, fitting a removable forestay is strongly recommended when there is a roller furling system. Wichard offers a whole range of BabyStay adjusters. WIC5546 WIC5554 WIC5556 WIC5566 WIC5585 Length Pin to pin Open / Closed Pin Dia Funct Inch lbs Wire size AdjustmentType 9-13/16” / 12-3/4” 1/2” 6173 1/4”-9/32”-5/16” WHEEL 12-13/16” / 17-3/4” 5/16” 2116 3/16” HANDLE 17-3/4” / 20” 1/2” 6173 1/4”-9/32”-5/16” HANDLE 14-9/16” / 21-1/4” 1/2” 6173 1/4”-9/32”-5/16” HANDLE 14-5/32” / 20-15/52” 5/8” 7055 5/16”-3/8” RATCHET Handle Ratchet Cordage, Rigging & Sailboat Hardware 7x7 construction 1x19 construction n 7X19X18GALV 7X19X532GALV 7X19X316GALV Size Const. 1/8 7x19 2000 lbs 5/32 7x19 2800 lbs 3/16 7x19 4200 lbs Plain copper oval sleeves for eye splices. NICO116 NICO332 NICO18 NICO532 NICO316 NICO732 NICO14 NICO516 STAINLESS STEEL WIRE ROPE Nominal breaking strength NICOPRESS SLEEVES 1/16 Type 302/304. Sold by the foot. 7X19X332 7X19X18 7X19X532 7X19X316 7X19X14 5/32 3/16 7/32 1/4 5/16 Size Const. Nominal breaking strength 3/32 7x19 1050 lbs 1/8 7x19 1760 lbs 5/32 7x19 2400 lbs 3/16 7x19 3700 lbs 1/4 7x19 6400 lbs WIRE ROPE CLIP Investment cast 316 stainless body. AISI 304 stainless U-bolt. 3/32 1/8 7x19 construction n GALVANIZED WIRE ROPE Sold by the foot. 601 Wire size 159502 159503 159504 159505 159506 159508 159510 159512 159514 3/32 1/8 5/32 3/16 1/4 5/16 3/8 1/2 9/16 CABLE CUTTERS For cutting wire rope up to 3/16 . 0690TN WIRE ROPE CLIP MULTI SWAGING TOOL For crimping 1/16 , 3/32 , 1/8 , 5/32 , 3/16 . 767-9036 Malleable wire rope clips Wire size SNAP-ON CABLE COVERS Extruded Polyethylene. 6 long. DAV0251 DAV0252 DAV0253 DAV0254 DAV0255 DAV0256 DAV0257 WIRE ROPE CLIP Manufactured to rigid specifications, these wire rope clips are hot dipped galvanized. Forged base with high wings holds ropes snugly in place, one over the other. Only Crosby clips have a Red U-Bolt for instant recognition. 3/32 1/8 5/32 3/16 1/4 5/16 3/8 159103 WRC316 WRC14 WRC516 WRC38 WRC716 WRC12 WRC58 WRC34 WRC78 WRC1 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4 7/8 1 Wire size G450-1/8 G450-3/16 G450-1/4 G450-5/16 G450-3/8 G450-7/16 G450-1/2 G450-5/8 G450-3/4 G450-7/8 G450-1 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4 7/8 1 602 Cordage, Rigging & Sailboat Hardware TURNBUCKLE BOOTS Extruded PVC. With caps. JAW & JAW TURNBUCKLE Machined AISI 316 stainless steel and features an electropolished bright finish. All thread sizes and wire rope sizes now conform to US standards and are interchangeable with most other US manufacturers. Note 185105 has 5mm metric threads. 185105 185106 185108 185110 185112 185116 185120 A B C D E F Breaking Strength 5mm 7-1/16 5-15/16 3-1/8 1/4 3/16 1980 lbs 1/4 -28 8-1/4 5-15/16 3-9/16 3/8 1/4 2860 lbs 5/16 -24 9-7/8 6-7/8 4-5/16 7/16 5/16 5500 lbs 3/8 -24 11“ 7-7/8 4-3/4 1/2 3/8 7700 lbs 5-15/16 9/16 1/2 11880 lbs 1/2 -20 14-9/16 9-5/8 5/8 -18 17-1/8 12-3/16 7-1/2 7/8 9/16 17600 lbs 3/4 -16 21-1/2 15-3/4 8-11/16 1 3/4 28600 lbs GALVANIZED JAW & JAW OPEN TURNBUCKLES TBKL14 TBKL516 TBKL38 TBKL12 TBKL58 TBKL34 TBKL78 Dia. Open Closed 1/4 10-3/4 7-1/4 5/16 13 9 3/8 16 10-1/2 1/2 17-1/2 12 5/8 25 16-1/2 3/4 32 21 7/8 33 21 3/16“ x 5-1/2” 1/4-20“ x 7-1/2” 5/16-18“ x 9” 3/8-16“ x 1-1/2” 5-pack 5-pack 5-pack 1-pack 1-3/4 ID x 24 3/4 replacement cap 1-1/8 replacement cap 1-1/2 replacement cap 1-3/4 replacement cap Used to guide rigging from out of a mast or spar or from below deck and allow exterior adjustment of the rigging. 081010 081011 081013 081012 Rope Length Width 1/2 1-1/4 3-1/4 1/2 1-1/4 3-1/4 Straight 3/4 2 4-5/8 Curved 3/4 2 4-5/8 Straight Round .50 dia. x .875 Flat .42 x 1 x .125 Flat .75 x 1 x .125 LASHING HOOK Formed AISI 304 Stainless 195210 195220 3/16“ x 5-1/2” 1-pack 1/4-20“ x 7-1/2” 1-pack 5/16 3/8 MAIN SAIL HOOK Formed AISI 304 Stainless 195410 195420 Hot dipped galvanized forged steel, all end fittings Quenched and Tempered, bodies heat treated by normalizing. Outstanding design features include elongated turnbuckle eyes. Shackles one size smaller than turnbuckles can be reeved through turnbuckle eye. Example part number HG226-14X4. Diameter and Length with Ends HG225take up inches in closed Position 1/4X4 8-1/4 HG2265/16X4-1/2 9-9/16 3/8X6 11-7/8 HG2271/2X6 13-5/16 18-1/2 1-1/2 ID x 20 EXIT PLATE DAV2350 DAV2351 DAV2352 TURNBUCKLES 5/8X9 1-1/8 ID x 17 Curved When it s time to lower your sail you can rely on Davis Round and Flat Sail Track Stops to hold your sail and its slides in place on the mast and boom. Large knurled wheels are released with ease. Made of heavy duty, black anodized aluminum and marine grade nickel plated brass. Flat stops come with lanyard holes. TURNBUCKLES, EYE-EYE 5198-310 5198-313 3/4 ID x 13 SAIL TRACK STOPS TURNBUCKLES, HOOK-EYE 5198-301 5198-303 5198-304 5198-306 DAV0241 DAV0242 DAV0243 DAV0244 DAV0245 DAV0246 DAV0247 DAV0248 HG228- 5/16 3/8 CUNNINGHAM HOOK Formed AISI 304 Stainless 195110 195120 1/4 5/16 REEFING HOOK Formed AISI 304 Stainless 195310 195320 5/16 3/8