Download Installation Manual VHF RADIOTELEPHONE FM-8800D
Transcript
Installation Manual VHF RADIOTELEPHONE FM-8800D/8800S System Configuration .......................................................................................................................... ii Equipment Lists ................................................................................................................................ iii 1. Mounting .....................................................................................................................................1-1 2. Connections................................................................................................................................2-1 3. Assembling console kit ...............................................................................................................3-1 PACKING LISTS.............................................................................................................................. A-1 Outline Drawings ............................................................................................................................. D-1 Interconnection DiagramS ............................................................................................................... S-1 www.furuno.co.jp The paper used in this manual is elemental chlorine free. ・FURUNO Authorized Distributor/Dealer 9-52 Ashihara-cho, Nishinomiya, 662-8580, JAPAN Telephone : +81-(0)798-65-2111 Fax : +81-(0)798-65-4200 All rights reserved. Printed in Japan A : SEP . 2004 H : SEP . 01, 2008 Pub. No. IME-56420-H (TATA ) FM-8800D/S *00014993217* *00014993217* * 0 0 0 1 4 9 9 3 2 1 7 * SAFETY INSTRUCTIONS CAUTION WARNING Attach securely protective earth to the ship's body. Hazardous voltage. Can shock, burn or cause serious injury. The protective earth (grounding) is required to the AC/DC power supply unit to prevent electrical shock. Do not work inside the equipment unless totally familiar with electrical circuits. Do not approach the antenna closer than 0.9 m (MPE by FCC) when it is transmitting. Confirm that the power supply voltage is compatible with the voltage rating of the equipment. The antenna emits radio waves which can be harmful to the human body. Connection to the wrong power supply can cause fire or equipment damage. The voltage rating appears on the label at the rear of the display unit. RF power density Description Distance on antenna aperture required by 100 W/m FM-8800S FM-8800D 2 10 W/m 2 W/m 2 100 W/m 2 0.11 m IEC 60945 0.33 m IEC 60945 0.9 m MPE by FCC 0.11 m IEC 60945 10 W/m 2 2 W/m 2 0.33 m IEC 60945 0.9 m MPE by FCC 2 (MPE: Minimum Permissible Exposure) Turn off the power at the mains switchboard before beginning the installation. Post a warning sign near the switchboard to indicate that power should not be applied while the equipment is being installed. Electrical shock, serious injury or fire can result if the power is not turned off or is applied while the equipment is being installed. Observe the compass safe distance to prevent deviation of a magnetic compass. Standard compass Steering compass FM-8800S 1.45 m 0.90 m FM-8800D 1.45 m 0.95 m IF-8810 0.85 m 0.55 m IF-8820 0.75 m 0.50 m HS-2003 1.50 m 0.95 m HS-8800 0.40 m 0.30 m RB-8800 (W/HS-8800) 1.20 m 0.80 m 1.50 m 1.00 m 0.90 m 0.60 m 1.55 m 1.00 m RB-8810 (W/HS-8800) PR-240 RB-8810-W (W/HS-8810-W) i SYSTEM CONFIGURATION VHF Antenna CH 70 RX Antenna VHF console RC-8800 Wing handset MAX 2 sets T/R AF output for VDR Handset HS-2003 Transceiver Unit Junction Box* IF-8810 FM-8800D FM-8800S IEC61162-1 input DSC information output External alarm Remote station RB-8800/8810 RB-8810-W DMC I/F IF-8820 MAX 4 sets RB-8800/8810 RB-8810-W Printer ALARM UNIT IC-350 IF+UTP-80FK IF+UTP-58E Printer PP-510 PP-8800/A Distress Message Controller DMC-5 Omit for Russian Version 100-115/200-230 VAC 50/60 Hz, 1φ Radio Battery 24 VDC AC/DC Power Supply Unit PR-240 External Speaker SEM-21Q 24 VDC : Standard : Optional Category of units Unit ii Category Antenna Exposed to weather All other units Protected from weather *: Option for FM-8800S/D-N EQUIPMENT LISTS Standard Supply Name 1 Transceiver Unit Type FM-8800D-E-A FM-8800D-E-N FM-8800D-F-A FM-8800D-F-N FM-8800S-E-A FM-8800S-E-N FM-8800S-F-A FM-8800S-F-N FM-8800S-R-A FM-8800S-R-N Qty 1 FP05-05700 2 Accessories* 4 5 Junction Box Installation Materials* Spare Parts* Remarks D: Duplex S: Simplex E: With handset HS-2003 F: With microphone DM-2003-F A: With IF-8810 N: No IF-8810 R: Russian version — 000-054-228 1 FP05-05710 3 Code No. 000-054-156 IF-8810 1 — CP05-09900 1 000-054-227 SP05-05501 1 005-377-820 For E-type Handset HS-2003, Hanger FP05-05510, Others FP05-05511 For F-type Microphone DM-2003-F For A-type Power cable 05S9371, CP05-09901 Standard Supply for VHF Console 1 2 Name VHF Console Installation Masteries* Type RC-8800-SN RC-8800-DN RC-8800-SA RC-8800-DA RC-8800-SB RC-8800-DB Qty 1 Code No. — CP05-10201 1 005-371-850 FP05-05800 3 FP05-05810 D: Duplex FM-8800D S: Simplex DM-8800S N: No printer A: With printer UTP-80FK B: With printer UTP-58E Handset HS-2003 & Handset hanger FP05-05510 HS-2003, FP05-05510, 000-010-428 Thermal paper TP058-30CL *: See lists at the end of this manual. 000-054-372 1 Accessories* Remarks iii EQUIPMENT LISTS Optional Equipment Name Flush Mount Kit Junction Box DMC Interface Loudspeaker Type OP05-102 IF-8810 IF-8820 RB-8800-15 (W/ 1.5 m Cable) RB-8800-20 (W/ 2 m Cable) RB-8810-15 (W/ 1.5 m Cable) RB-8810-20 (W/ 2 m Cable) RB-8810-W-15 HS-8800-15 HS-8800-20 HS-8800-W-15 HS-2003-15 HS-2003-20 HS-2003-50S HS-6000FZ11 FP05-05700 HG-8800 HG-8810 FP05-05510 AP-102 SEM-21Q — 000-054-230 000-054-171 000-054-287 000-054-223 000-054-390 000-054-391 000-135-072 000-010-246 000-054-229 000-054-231 005-951-790 000-580-019 000-144-917 Dynamic Mic. Set OP05-57 000-045-775 Carbon Mic. Set OP05-58 000-045-776 Handset set OP05-42 000-045-778 Mic. Receptacle Box RBD-VHF (B) 000-056-094 Microphone DM-2003-F 005-377-760 Printer Printer Interface AC-DC Power Supply PP-510 IF-8500 PR-240 Remote Station Handset Handset Hanger Antenna Material *: **: iv Code No. 000-054-120 — — Remarks W/ Screw 5x20 4 pcs. No use for Russian version — ·FP05-05701*, ·Handset HS-8800, ·Hanger W/DIST. button HG-8800 — ·FP05-05511*, ·Handset HS-8800, ·Hanger HG-8810 W/ HS-8800-W-15 W/ 1.5 m Cable W/ 2 m Cable Waterproof W/ Cable 1.5 m W/ Cable 2.0 m W/ Straight cable 5.0 m HS-2003-15 & Hanger For HS-8800 For HS-8800 For HS-2003 For HS-6000FZ11 Handset HS-6000FZ5, Receptacle RDB-VHF(B), Hanger AP-102 Handset HS-6000FZ6, Receptacle RDB-VHF, Hanger AP-102 Handset HS-6000FZ11, Receptacle RDB-VHF(B), Hanger AP-102 For transceiver unit only (not RB-8800), ** — — — AP05-00800 000-057-721 AP05-00810 000-057-722 AP05-00900 000-057-739 AP05-01000 000-054-123 Whip antenna FAB-151D, Mounting plate 4-310071, Coax. Cable 5D-2V 10m, Connector M-P-5 2 PCS Whip antenna RA106, Mounting plate RA115, Coax. Cable 05S9104 5m Whip antenna 396-1, Mounting plate 4187 Whip antenna FAB-151D, Mounting plate 4-310071, Connector M-P-7 2 PCS See lists at the end of this manual Microphone DM-2003-F can be connected to transceiver unit instead of handset HS-2003. However, in this case, any remote station is disabled. EQUIPMENT LISTS Name Antenna Material Signal Cable Twisted Cable Type AP05-01100 000-054-224 AP05-01200 000-054-232 AP05-01210 000-054-233 05S0309 *10M* 000-106-043 Whip antenna 150M-W2VN, Coax. Cable 5D-2V 10m, Connector M-P-5 2 PCS Whip antenna FAB-151D, Mounting plate 4-310071, Coax. Cable 5D-2V 10m, Connector M-P-5 & M-P-7 Whip antenna FAB-151D, Mounting plate 4-310071, Coax. Cable 5D-2V 20m, Connector M-P-5 & M-P-7 10m 05S0309 *20M* 000-106-044 20m 05S0309 *30M* 000-106-046 30m 05S0309 *40M* 000-106-047 40m 05S0309 *50M* 000-106-048 50m 000-111-680 5m 000-120-792 10m 000-120-793 15m 000-120-794 20m CO-SPEVV-SB-C 0.2x2P 000-120-214 VHF Console Kit Printer Remarks Code No. 30m RC-8800-N-75BG - Without Printer RC-8800-A-75BG - With Printer UTP-80FK RC-8800-B - With Printer UTP-58E - W/ power cable PP-8800 PP-8800A Emergency lamp EMG-1T Cable 05S9509-L500 000-138-378 For rack console, cable attached 000-168-955-10 For handset extension v EQUIPMENT LISTS vi 1. MOUNTING Transceiver Unit General mounting considerations Determine the mounting location for the transceiver unit considering operator convenience, proximity to the power source and the ground location. Keep these and the following points in mind when selecting a mounting location. • Locate the unit in a place free of water spray and water splash. • Keep the unit out of direct sunlight because of heat that can build up inside the unit. • Leave a little slack in cables to allow a service technician to move the radio from its usual location with the cables connected. This lets him make tuning and other adjustments on a “live” set. • Do not install the unit where flammable gases are stored. • Select a well-ventilated area. • Ensure the mounting location is strong enough to support the weight of the unit (approx. 6 kg) under the condition of continued vibration normally encountered aboard the vessel. If necessary, reinforce the mounting area with a doubling plate or lining block. • Leave sufficient space at the sides and rear of the unit for maintenance and service purposes and to provide for circulation of cooling air. See outlines drawings at the back of this manual. • For flush mounting, select a location where the LCD can be easily viewed. • The transceiver unit will affect a magnetic compass if placed too near the compass. Observe the compass safe distance to prevent deviation of a magnetic compass, referring to page “ i ”. Note: Take great care not to press the DISTRESS switch during the installation. If you accidentally press the switch, immediately turn off the equipment and contact appropriate authority by telephone. 1-1 1. MOUNTING Overview of mounting methods Keep pressed for 4 s in case of DISTRESS. The alert is transmitted with steady lighting. DISTRESS 1 2 4 IntCom GHI ALM STOP CALL Keep pressed for 4 s in case of DISTRESS. The alert is transmitted with steady lighting. DISTRESS 1 2 4 IntCom GHI ALM STOP MSG 7 INTL USA PQRS SHIFT * CANCEL CALL ABC 5 ACK 8 SCAN 0 HI/L0 JKL TUV 3 6 9 # TEST DEF USA SHIFT ABC 5 ACK 8 SCAN 0 HI/L0 JKL TUV 3 6 9 # TEST DEF PRINT MNO DW WXYZ LOG CH16 FILE MENU ENT FILE MNO DW INTL PQRS CH16 PRINT WXYZ MSG 7 * CANCEL MENU LOG ENT Overhead Tabletop Keep pressed for 4 s in case of DISTRESS. The alert is transmitted with steady lighting. DISTRESS 1 2 4 IntCom GHI 7 ALM STOP CALL MSG Flush Mount INTL USA PQRS SHIFT * CANCEL ABC 5 ACK 8 SCAN 0 HI/L0 JKL TUV 3 6 9 # TEST DEF PRINT MNO DW WXYZ LOG CH16 FILE MENU ENT Bulkhead Overview of mounting methods 1-2 1. MOUNTING Mounting procedure for tabletop, overhead and bulkhead mounting 1. Using the hanger as a template, mark fixing holes in the mounting location. 2. Fix the hanger to the mounting location with self-tapping screws and washers (supplied). (For added support, use nuts, bolts and washers instead of self-tapping screws.) 3. Screw the knob bolts with washers into the transceiver unit. 4. Set the transceiver unit to the hanger and tighten knob bolts. 265 251 Keep pressed for 4 s in case of DISTRESS. The alert is transmitted with steady lighting. 1 DISTRESS 110 2 ABC 3 TEST DEF 4 IntCom 5 ACK 6 PRINT INTL 8 SCAN 9 DW 0 HI/L0 # GHI JKL MNO CH16 FILE ALARM CANCEL 7 ALM STOP SQL VOL/PWR CH CALL SHIFT MSG OFF TUV * HANDSET USA PQRS WXYZ LOG MENU ENT PUSH TO ENTER AUTO Keep pressed for 4 s in case of DISTRESS. The alert is transmitted with steady lighting. DISTRESS 1 2 4 IntCom CANCEL 7 ALM STOP HANDSET SQL VOL/PWR CH CALL MSG OFF AUTO INTL USA PQRS SHIFT * 100 GHI ABC 5 ACK 8 SCAN 0 HI/L0 JKL 3 6 TEST DEF PRINT MNO CH16 FILE ALARM TUV 9 # DW WXYZ LOG MENU 100 ENT PUSH TO ENTER • All dimensions in millimeters. • Leave sufficient space at the sides and rear of the unit to provide easy access for maintenance and service. Mounting dimensions for tabletop, overhead and bulkhead mounting 1-3 1. MOUNTING Mounting procedure for flush mount (option) Requires optional flush mount kit OP05-102 (Code No. 000-054-120). Prepare a cutout in the mounting location whose dimensions are as shown in the figure below. Flush mount kit OP05-102 Name 1 Mounting plate 2 Self-tapping screw 3 Hex screw Qty 1 4 2 #150 244 260 ± 1 280 ± 1 277 ± 0.5 122 ± 0.5 251 Code No. 100-323-160 000-802-081 000-882-075 105 ± 1 30 ± 1 20 14 27 Type 05-093-1211 5x20 M8x16 Pilot holes (4 pcs.) Mounting dimensions for flush mount VHF Antenna The antenna requirements Any good quality antenna meeting the requirements shown below may be used. A high-gain antenna is preferable. • Frequency range: 155 to 164 MHz • Impedance: 50 ohms • Polarization: Vertical • Handling power: 30 W/ min • Quality: Able to withstand marine environment Mounting considerations • The antenna should be well separated from nearby antennas, masts, and other interfering objects. • The higher the antenna is mounted above the horizon, the further the communications range. Mounting procedure The basic mounting procedure for antennas supplied by FURUNO is as follows, however consult appropriate outline drawing for details. 1. Fasten the antenna bracket to the stanchion. 2. Set the antenna to the antenna bracket and tighten bolts. 3. Screw the coaxial cable plug into the antenna. 1-4 1. MOUNTING CH70 RX Antenna The antenna should be well separated from nearby antennas, masts, and other interfering objects. The mounting procedure is the same as that for the VHF antenna, however consult appropriate outline drawing for details. Handset Hanger The handset hanger can be mounted at the left side of the transceiver unit. The mounting location should provide easy access to front panel controls while operating the handset. Also, the length of the standard handset cable is 50 cm, so locate the handset hanger within 50 cm of the unit. (Longer cables are available optionally.) Power Supply (option) For Convention vessels, both AC and DC power must be fed to the FM-8800D/8800S, via an AC-DC power supply. When AC input fails, DC power is supplied. FURUNO can supply an AC-DC power supply unit, the PR-240. Mounting considerations When selecting a mounting location, keep in mind the following points. • Select a location which provides adequate ventilation. • The location must be clean and dry. • The mounting location must be able to support the weight of the unit (14.5 kg) under the continued conditions of vibration normally encountered aboard the vessel. If necessary, reinforce the mounting location. • The PR-240 will affect a magnetic compass if it is placed to near the compass. Observe the compass safe distance to prevent deviation of a magnetic compass, referring to page “ i ”. Mounting Refer to outline drawing. 1-5 1. MOUNTING Printer (option) Printer PP-510 To mount the printer, refer to the printer outline drawing at the back of this manual. 1. Select a flat surface. 2. Fix the mounting base to the mounting location with four screws (supplied). 3. Lay the printer on the top of the mounting base and fasten it with the mounting fixtures (two at each side and one at rear). Mounting Fixture Mounting Fixture Mounting Dimensions 300 (H) x 396 (W) mm Mounting of Printer PP-510 Printer PP-8800 The printer PP-8800 is flush-mounted in a panel. Refer to the outline drawing at the back of this manual. 1. Make a cutout of 208(w) x 118(h) mm. 2. Set the printer and fix it with four self-tapping screws (4x16). Printer Interface (option) The printer interface IF-8500 is required for the printer PP-510 which is commonly used with the FM-8800D/S and other MF/HF radio communication equipment. To mount the unit, see the outline drawing at the back of this manual. External Loudspeaker (option) The external loudspeaker can be installed on a tabletop, the overhead or a bulkhead. Fasten the loudspeaker to the mounting location with self-tapping screws, or nuts, bolts and washers. For mounting dimensions, see the outline drawing at the back of this manual. 1-6 1. MOUNTING Junction box IF-8810/ DMC interface IF-8820 Note: DMC interface IF-8820 is not used for Russian version. To install the remote box RB-8800/RB-8810, wing handset, etc., the junction box IF-8810 is required. Install the junction box near the transceiver unit. Approx. 3 m cable is preattached to the junction box to connect to the transceiver unit. To connect Furuno’s distress message controller DMC-5, the DMC interface IF-8820 (option) is required. 1. Open the cover. 2. Mount the unit with four self-tapping screws (5x20). 240 100 Note: This plug is not fitted in IF-8820. Fixing holes 5mm dia. Mounting the junction box/DMC interface 1-7 1. MOUNTING Remote station RB-8800/RB-8810 (option) Up to four remote stations can be connected in a daisy chain. Note: For the remote station RB-8800, there are two method of cable entry: bottom-side entry and rear-side entry. For rear-side entry, make one or two holes of more than 12 mm diameter. For last station in the daisy chain, just one cable entry hole is needed. 1. Remove screws on the handset hanger (four for RB-8800, six for RB-8810). 2. Remove upper chassis of the hanger. 3. Mount the base of the hanger to a bulkhead with self-tapping screws 4x20 (four for RB-8800), or 4x16 (two for RB-8810). 4. After connecting cables, assemble the remote station. 5. For RB-8800, attach blind seals on the screws. Cover of handset hanger 63 Handset hanger HG-8800 20 30 33 Screws 4 pcs. Attach blind seal on the screws. 40 Nameplate DISTRESS Cable entry (Rear) 140± 0.5 φ 12 Handset HS-8800 φ 12 Cable entry 77 VOLUME #150 4- φ4.5 Fixing holes 40 ± 0.5 40 ± 0.5 Cable entry (Bottom) Remote station RB-8800 Hanger HG-8810 (77) Handset HS-8800 57 22 145 ± 0.5 208 (208) #150 φ12, Cable entry Nameplate 2- φ4.5 Fixing hole Hanger Hanger mounting base Remote station RB-8810 1-8 42 Cable entry 65 1. MOUNTING Outdoor mounting of waterproof-type remote station RB-8810-W Remote station RB-8810-W (with waterproof-type handset HS-8800-W) can be mounted outdoors if it is set in a waterproof box. The hanger should be coated as directed below with silicone sealant for waterproofing. Note 1: Be sure to use a waterproof box to mount the RB-8810-W outdoors. The waterproofing category of the RB-8810-W is IEC60529 IP56, however this should be protected from the weather (IEC 60945). Note 2: Before sealing with silicone sealant (for waterproofing), do the termination setting (only for termination device, see page 2-7), connect cables and conduct the performance test. After sealing, do not open the handset hanger. 1. Fix the mounting base with self-tapping screws. Coat exposed part of these screws with silicone sealant. 2. Attach the cable from the transceiver unit or junction box. Coat cable around cable entrance with silicone sealant. 3. Fix the cover of the handset hanger. Coat junction between mounting base and cover with silicone sealant. 2. Coat all around the cable at cable entry. 1. Coat self-tapping screws. 3. Coat all around the junction. Note: Confirm that plastic washers are in screw holes before fixing cover. 1-9 1. MOUNTING VHF console Install the rack console where the equipment can be easily operated, checked and serviced. Consult with shipyard personnel and ship's officer-in-charge to determine best location. The location must satisfy the following points: • Select a location where controls can be easily operated. • Select a location where shock and vibration are minimal. • Locate the console away from water splash and rain. • The temperature and humidity of the location should be both stable and moderate. Fixing 1. Ask shipyard personnel to tighten six M5 nuts or six M5 bolts to the fixing holes (on the wall), referring to the outline drawing at the back of this manual. 2. Detach the cover assembly from the console. 3. Hang VHF console on bolts. 4. Screw the console with the bolts or nuts tightly. 5. Attach the cover assembly to the console. Note: When you connect wires as soon as attaching console, refer to paragragh 2-10. 6. Attach the handset hanger with two screws. 7. To attach the optional emergency lamp, connect the cable to the terminal board, and then attach the lamp to the console. Refer to the interconnection diagram and out line drawing. (371) EMG-1T EMERGENCY LAMP 190 ° 75 (371) 330 145 480 (500) 30 298 ± 0.5 1-10 FIXING HOLES TERMINAL BOARD (266) #50 CABLE ENTRY (REAR) 250 30 40 170 ± 0.5 170 ± 0.5 40 HANDSET HANGER 2. CONNECTIONS Overview The figure below shows where to connect various equipment at the rear of the transceiver unit. ANT Connects antenna. Ground terminal. 24VDC Connects power cable. PRINTER Connects printer PP-510. IEC61162-1 (NMEA)/REMOTE Connects junction box IF-8810. EXT SP Connects external loudspeaker. CH70 RX ANT Connects DSC antenna here. FM-8800D/8800S, rear view Connection of Power Supply Convention vessels, 100/220 VAC ship’s mains Convention vessels must supply both AC and DC power to the FM-8800D/8800S, via an AC-DC power supply unit. Both AC and DC are supplied by the AC-DC power supply unit, and when AC input fails DC power is activated. Connect the radio battery to the DC IN terminal on the PR-240. Connect the AC ship’s mains to the AC IN terminal on the PR-240. Radio battery (24 VDC) Attach the connector supplied to the power cable and plug it into the 24VDC connector at the rear of the transceiver unit. Connect the wire ends to the radio battery line. 2-1 2. CONNECTIONS Connection of VHF Antenna The VHF antenna is connected to the transceiver unit with a 50 ohm coaxial cable, type 5D-2V. Be sure to leave some slack in the cable for future service and maintenance. Lay the coaxial cable and attach an M-type plug to the cable (if necessary) as follows. 1. 2. 3. 4. 5. Remove the sheath by 20 mm. Bare 13 mm of the center conductor. Trim braided shield by 5 mm and tin. Slide coupling ring onto cable. Screw the plug assembly on the cable. Solder plug assembly to braided shield through solder holes. Solder contact sleeve to conductor. 6. Screw coupling ring into plug assembly. 7. Screw the plug into the ANT connector at the rear of the transceiver unit. How to attach the M-type plug to the coaxial cable 2-2 2. CONNECTIONS Connection of DSC Antenna The DSC antenna is connected to the transceiver unit with a 50 ohm coaxial cable, type 5D-2V. Attach an M-type plug to the cable (if necessary) as shown an page 2-2. Screw the plug into the CH70 RX ANT connector at the rear of the transceiver unit. Connection of Handset Connect the handset cable to the HANDSET connector on the front panel. Grounding the Transceiver Unit Fasten a ground wire (local supply) between the GND terminal at the rear of the transceiver unit and ship’s hull (or ground bus). Connecting the Junction Box The junction box is required to connect a remote station, wing handset, etc. The cable to be connected with the transceiver unit is prefitted on the junction box at the factory. For connection of other cables, see the interconnection diagram. Cable entry Clamp the cable with U-type cable clamps. Use one of these nuts for ground terminal between JB and ship's body. Cable clamp: Clamp shield part of the cables to ground cables. 2-3 2. CONNECTIONS Connecting the Remote Station without the Junction Box The remote station (or DMC Interface, Mic. Receptacle box, etc) can be connected directly to the transceiver unit, using the D-sub connector supplied as installation materials. Attach the connector to the cable as follows. Shield tape (metal) Fold back the armor, and then wind the shield tape along the edge of cable. Cable clamp Cable Connector XM2A-3701 & Housing case XM2S-3712 Attachment of connector When the handset HS-2003 is not connected to the Transceiver unit When the handset HS-2003 is not connected to the transceiver unit, i.e.,always the remoted handset is used, the following modification is necessary. 1. Dismount the cover of the transceiver unit by removing four screws at the rear panel and two screws at the side. 2. Dismount the bottom cover by removing seven screws. J15 CPU board 05P0773 3. Shorten between #1 and #2 of J15. The handset line of the HANDSET port becomes always “ON HOOK”. 4. Assemble the unit. 2-4 2. CONNECTIONS Connection of AC-DC Power Supply Unit PR-240 The power supply PR-240 is shipped ready for connection to a 200-230 VAC ship’s mains. If the ship’s mains is 100 VAC – 115 VAC, change the tap connection and terminal board connection as below. Attach label supplied as accessories to the punch mark in the front panel according to the ship’s mains. Ship’s mains Tap connection Terminal board connection #1 & #2 100-115 VAC SEL 115 V b 200-230 VAC SEL 230 V a 100-115 VAC 200-230 VAC 1 White 1 White 2 Black 2 Black 3 3 Punch mark (a) (b) Front SEL 115 V 1 2 3 4 5 6 7 8 SEL 230 V Terminal board connection Heat sink Tap connection (Pull out to disconnect) Top view of AC/DC power supply unit (cover removed) 2-5 2. CONNECTIONS Protective earth Connect IV-2.0sq wire between ship’s superstructure and the ground terminal on the PR-240. CAUTION Attach protective earth securely to the ship's body. The protective earth (grounding) is required for the AC/DC power supply unit to prevent electrical shock. Attach a label here. GND terminal PR-240 Front panel 2-6 2. CONNECTIONS Jumper Setting for Termination Note: DMC interface is not used for Russian version. It is necessary, for termination, to change the jumper setting for remote station or DMC interface. Open the unit(s) terminated and change the jumper plugs J2 and J3 to ON position (#2-#3). (Default setting is OFF position.) Transceiver Unit Junction Box Remote Station Remote Station DMC I/F Remote Station Remote Station Remote Station Terminated Unit Note that up to four remote stations can be connected. LINE TERMINATION J3 DISTRESS 1 ON RS-485 TERMINATION J2 3 1 ON 3 J1 Set to ON (#2-3) for termination. 05P0782 TB1 VOLUME TB2 Remote station RB-8800 Cable entry TB1 TB2 J3 3 3 ON OFF 1 J2 RS-485 TERMINATION LINE TERMINATION ON OFF 1 05P0798 2- φ 4.5 Set to ON (#2-3) for termination. J1 Fixing hole Remote station RB-8810 2-7 2. CONNECTIONS Remove four screws to open the unit. Set jumper plug to ON (#1-2). 05P0778 J4 ON RS-485 TERMINATION TB1 DMC Interface IF-8820 2-8 2. CONNECTIONS 2.10 Wire connection of VHF console 1. Remove the cover assembly and printer assembly (or concealing lid) form the console. For the printer assembly, remove the cables connected at the Transceiver Unit and the terminal board. Cover assembly Binding screw F M4X10 8 places Binding screw F M4X10 4 places Printer assembly or Concealing lid Console Terminal board 2. Connect the power cable from the ship to the terminal block 1 (+) and 2 (-). Terminal Board Wiring 1. Wiring conductor 9∼10mm 2. Wiring 1)Insert a screwdriver which blade edge is 3.5 X 0.5mm to the square hole. 2)Press the screwdriver to arrow direction to open the spring in the round hole. 3)Insert the wire to the round hole. 4)Remove the screwdriver. Power cable from the ship 1 2 1 2 3 4 5 6 7 8 - Square hole Round hole Terminal board 3. Connect the ground wire from ship to each ground terminal for the transceiver unit and the junction box. 4. Connect cables from external equipments to the junction box. 5. Fix the printer assembly (or concealing lid) and the cover assembly. 2-9 2. CONNECTIONS This page is intentionally left blank. 2-10 3. ASSEMBLING CONSOLE KIT A VHF console kit is required to mount the Transceiver Unit in the field. There are two types as shown below. VHF console kit Type RC-8800-N-75BG RC-8800-A-75BG Code No. 000-054-125 000-054-126 Remarks Without printer With printer Assembling the Console Kit 1. Remove the cover assembly, the panel assembly and the printer assembly (or concealing lid) from the console. For the printer assembly, remove the cable connected to the terminal board. Cover assembly Binding screw F 8 places M4X10 Binding screw F 4 places M4X10 Printer assembly (or Concealing lid # # Remove screws( )and detach the panel assembly. Console Panel assembly 3-1 2. Fix the panel assembly to the Transceiver Unit with binding screws (use original binding screws of the Transceiver Unit). Refer to the figure below. 3. Screw in hex bolts M8x16 and flat washers loosely at both sides of the Transceiver Unit. Panel assembly Binding screw M4 2 places (Use the original screws of the Transceiver Unit.) Washer M8 2 places Hex bolt M8X16 2 places (faster loosely) 4. Set the Transceiver Unit to the console, remove the grommets from the console and fix the Transceiver Unit with hex bolts using the holes formerly occupied by the grommets. Hex head screws Mounting of the Transceiver Unit Insert console upside down. Close the hole with grommets lastly. Connecter Connecter Mounting plate Transceiver Unit Flat washer Fix Mounting Plate between washers. 5. Connect connector from the fuse to the power connector derived from the Transceiver Unit. 3-2 6. Replace the cable attached to junction box with the cable (55 cm, 37-pin D sub) supplied with the console kit. Replace the original cable with the cable assembly DSUB37M-PHX3-L550. A Junction box (without cover) PH Connector 10P PH Connector 12P J3 J2 J1 PH Connector 14P 2 3 Crimp-on lug A View 7. Connect the cable (37-pin D sub) attached to the junction box to the Transceiver Unit and then mount the junction box on the console. ±Binding screw F M4X8 4 places Cover ±Screw B M4X10 4 places Mounting plate 3-3 Junction box Grommets 2 places 8. For the console w/printer, connect the printer cable for data transmission to the PRINTER port of the Transceiver Unit and fix the power cable to the terminal board as before. Then, fix the printer assembly to the console. For no printer, fasten the concealing lid to the console. Printer Printer cable W/ Printer J2 Insert the mounting plate for printer to the catch of the console View 9. Fasten the cover assembly. NOTE: If the console assembly is to be mounted on the hull, refer to paragraghs 1-9 and 2-10. 3-4 OUTLINE INSTALLATION MATERIALS ACCESSORIES SPARE PARTS UNIT 005-377-800-00 CP05-09901 000-151-711-12 05S9371-2 005-951-920-00 FP05-05511 005-951-790-00 FP05-05510 000-054-223-00 HS-2003-15 005-377-820-00 SP05-05501 000-054-225-00 FM-8800S/D 1 Q'TY 1 1 CP05-09900 1 1 1 FP05-05700 1 SP05-05501 ** DESCRIPTION/CODE № (略図の寸法は、参考値です。 DIMENSIONS IN DRAWING FOR REFERENCE ONLY.) NAME DOCUMENT OUTLINE 1/1 000-149-935-0* TIC-56420-* 000-809-269-0* *52-00101-* 000-149-929-0* OM*-56420-* 000-149-931-0* IM*-56420-* 000-149-933-0* OS*-56420-* ** ** ** ** DESCRIPTION/CODE № 05EC-X-9851 -6 1 1 1 1 1 Q'TY TWO TYPES AND CODES MAY BE LISTED FOR AN ITEM. THE LOWER PRODUCT MAY BE SHIPPED IN PLACE OF THE UPPER PRODUCT. QUALITY IS THE SAME. 05EC-X-9851 型式/コード番号が2段の場合、下段より上段に代わる過渡期品であり、どちらかが入っています。 なお、品質は変わりません。 DISTRESS PROCEDURE VHF/MF DISTRESS ALERT FLOW 遭難通信要領書 遭難警報フロ(VHF/MF) OPERATOR'S MANUAL 取扱説明書 INSTALLATION MANUAL 装備要領書 OPERATOR'S GUIDE 操作要領書 図書 FM-8800(S/D)-(J/E/F)-HS-N コ-ド番号末尾の[**]は、選択品の代表型式/コードを表します。 CODE NUMBER ENDING WITH "**" INDICATES THE CODE NUMBER OF REPRESENTATIVE MATERIAL. INSTALLATION MATERIALS 工事材料 CABLE ASSY. ケーブル組品 工事材料 ACCESSORIES 付属品 BRACKET FOR HANDSET ハンドセットハンガー組品 HANDSET ハンドセット 付属品 SPARE PARTS 予備品 予備品 TRANSCEIVER UNIT 送受信機 ユニット NAME PACKING LIST A-1 OUTLINE INSTALLATION MATERIALS ACCESSORIES SPARE PARTS UNIT 005-377-800-00 CP05-09901 000-054-223-00 HS-2003-15 005-951-790-00 FP05-05510 005-951-920-00 FP05-05511 005-377-820-00 SP05-05501 000-054-219-00 IF-8810 000-054-225-00 FM-8800S/D 1 1 1 Q'TY 1 CP05-09900 1 1 1 FP05-05700 ** DESCRIPTION/CODE № (略図の寸法は、参考値です。 DIMENSIONS IN DRAWING FOR REFERENCE ONLY.) NAME DOCUMENT 1/1 000-809-269-0* *52-00101-* 000-149-929-0* OM*-56420-* 000-149-931-0* IM*-56420-* 000-149-933-0* OS*-56420-* 000-149-935-0* TIC-56420-* 005-949-280-00 CP05-08701 000-151-711-12 05S9371-2 1 Q'TY ** ** ** ** 1 1 1 1 1 1 CP05-08701 DESCRIPTION/CODE № 05EC-X-9856 -5 TWO TYPES AND CODES MAY BE LISTED FOR AN ITEM. THE LOWER PRODUCT MAY BE SHIPPED IN PLACE OF THE UPPER PRODUCT. QUALITY IS THE SAME. 05EC-X-9856 型式/コード番号が2段の場合、下段より上段に代わる過渡期品であり、どちらかが入っています。 なお、品質は変わりません。 VHF/MF DISTRESS ALERT FLOW 遭難警報フロ(VHF/MF) OPERATOR'S MANUAL 取扱説明書 INSTALLATION MANUAL 装備要領書 OPERATOR'S GUIDE 操作要領書 DISTRESS PROCEDURE 遭難通信要領書 図書 OUTLINE INSTALLATION MATERIALS INSTALLATION MATERIALS 工事材料 工事材料 CABLE ASSY. ケーブル組品 FM-8800(S/D)-(J/E/F)-HS-A/(-HK) コ-ド番号末尾の[**]は、選択品の代表コードを表します。 CODE NUMBER ENDING WITH "**" INDICATES THE CODE NUMBER OF REPRESENTATIVE MATERIAL. INSTALLATION MATERIALS 工事材料 工事材料 HANDSET ハンドセット BRACKET FOR HANDSET ハンドセットハンガー組品 ACCESSORIES 付属品 付属品 SPARE PARTS 予備品 予備品 JUNCTION BOX セツゾクバコ TRANSCEIVER UNIT 送受信機 ユニット NAME PACKING LIST A-2 NAME DOCUMENT 000-149-935-0* TIC-56420-* 000-809-269-0* *52-00101-* 000-151-711-12 05S9371-2 005-377-800-00 CP05-09901 005-377-760-00 DM-2003-F 005-377-820-00 SP05-05501 000-054-225-00 FM-8800S/D 1 1 Q'TY 1 1 1 1 CP05-09900 1 FP05-05710 ** DESCRIPTION/CODE № (略図の寸法は、参考値です。 DIMENSIONS IN DRAWING FOR REFERENCE ONLY.) NAME OUTLINE 1/1 000-149-929-0* OM*-56420-* 000-149-931-0* IM*-56420-* 000-149-933-0* OS*-56420-* DESCRIPTION/CODE № 05EC-X-9858 -4 1 1 1 Q'TY TWO TYPES AND CODES MAY BE LISTED FOR AN ITEM. THE LOWER PRODUCT MAY BE SHIPPED IN PLACE OF THE UPPER PRODUCT. QUALITY IS THE SAME. 05EC-X-9858 型式/コード番号が2段の場合、下段より上段に代わる過渡期品であり、どちらかが入っています。 なお、品質は変わりません。 OPERATOR'S MANUAL 取扱説明書 INSTALLATION MANUAL 装備要領書 OPERATOR'S GUIDE 操作要領書 FM-8800(S/D)-(J/E/F)-MIC-N コ-ド番号末尾の[**]は、選択品の代表コードを表します。 CODE NUMBER ENDING WITH "**" INDICATES THE CODE NUMBER OF REPRESENTATIVE MATERIAL. DISTRESS PROCEDURE VHF/MF DISTRESS ALERT FLOW 遭難通信要領書 遭難警報フロ(VHF/MF) 図書 CABLE ASSY. ケーブル組品 OUTLINE INSTALLATION MATERIALS ACCESSORIES SPARE PARTS UNIT INSTALLATION MATERIALS 工事材料 工事材料 MICROPHONE マイクロフォン箱詰品 付属品 SPARE PARTS 予備品 予備品 TRANSCEIVER UNIT 送受信機 ユニット PACKING LIST A-3 NAME INSTALLATION MATERIALS 005-949-280-00 CP05-08701 000-151-711-12 05S9371-2 005-377-800-00 CP05-09901 005-377-760-00 DM-2003-F 005-377-820-00 SP05-05501 000-054-219-00 IF-8810 000-054-225-00 FM-8800S/D 1 1 1 Q'TY 1 1 1 CP05-09900 1 FP05-05710 ** DESCRIPTION/CODE № (略図の寸法は、参考値です。 DIMENSIONS IN DRAWING FOR REFERENCE ONLY.) NAME DOCUMENT OUTLINE 1/1 000-149-929-0* OM*-56420-* 000-149-931-0* IM*-56420-* 000-149-933-0* OS*-56420-* 000-149-935-0* TIC-56420-* 000-809-269-0* *52-00101-* DESCRIPTION/CODE № 05EC-X-9859 -4 1 1 1 1 1 Q'TY TWO TYPES AND CODES MAY BE LISTED FOR AN ITEM. THE LOWER PRODUCT MAY BE SHIPPED IN PLACE OF THE UPPER PRODUCT. QUALITY IS THE SAME. 05EC-X-9859 型式/コード番号が2段の場合、下段より上段に代わる過渡期品であり、どちらかが入っています。 なお、品質は変わりません。 OPERATOR'S MANUAL 取扱説明書 INSTALLATION MANUAL 装備要領書 OPERATOR'S GUIDE 操作要領書 DISTRESS PROCEDURE VHF/MF DISTRESS ALERT FLOW 遭難通信要領書 遭難警報フロ(VHF/MF) 図書 FM-8800(S/D)-(J/E/F)-MIC-A コ-ド番号末尾の[**]は、選択品の代表コードを表します。 CODE NUMBER ENDING WITH "**" INDICATES THE CODE NUMBER OF REPRESENTATIVE MATERIAL. INSTALLATION MATERIALS 工事材料 工事材料 CABLE ASSY. ケーブル組品 OUTLINE INSTALLATION MATERIALS ACCESSORIES SPARE PARTS UNIT INSTALLATION MATERIALS 工事材料 工事材料 MICROPHONE マイクロフォン箱詰品 付属品 SPARE PARTS 予備品 予備品 JUNCTION BOX セツゾクバコ TRANSCEIVER UNIT 送受信機 ユニット PACKING LIST A-4 /+%412*10' 㩙㨼㩂㩥㩖㨵㩧 *11- 㩖㨹㩂 㩙㨼㩂㩈㨹㩎 /+%412*10'5'6 176.+0' -10 <+4::%&/ &'5%4+26+10%1&'ͳ '%: 㧔⇛࿑ߩኸᴺߪޔෳ⠨୯ߢߔ&ޕ+/'05+105+0&4#9+0)(144'('4'0%'10.;㧕 0#/' &/( 㧼㧭㧯㧷㧵㧺㧳ޓ㧸㧵㧿㨀 '%: 36; A-5 5'.(6#22+0)5%4'9 㩎㩡㩇㩊㨹㩕㩩㩧㩒㩆㩨ޓ㩆㨷 *175+0)%#5' 㩄㩒㩂㩊㩖㨺㩎㩨 :/ %100'%614 㩄㩒㩂㩊 :/ %#$.'#55; 㩚㩐㩕㩩㩧⚵ຠ ฬޓޓ⒓ 0#/' ⇛ޓޓ࿑ 176.+0' %1&' 01 :575 :575 %1&' 01 :/5 %1&' 01 :/# %1&' 01 . ဳฬ㧛ⷙᩰ &'5%4+26+105 ᢙ㊂ 36; %2 6;2' ↪ㅜ㧛⠨ 4'/#4-5 '%: 㧲㨁㧾㨁㧺㧻ޓ㧱㧸㧱㧯㨀㧾㧵㧯ޓ㧯㧻ޓ㧚㧘㧸㨀㧰 㧔⇛࿑ߩኸᴺߪޔෳ⠨୯ߢߔ&ޓޕ+/'05+105+0&4#9+0)(144'('4'0%'10.;㧕 '%: ဳᑼ㩄㨺㩎㩨⇟ภ߇㧞Ბߩ႐วޔਅᲑࠃࠅᲑߦઍࠊࠆㆊᷰᦼຠߢࠅޔ߅ߥޓޕߔ߹ߡߞ߇߆ࠄߜߤޔຠ⾰ߪᄌࠊࠅ߹ߖ ࠎޕ 6916;2'5#0&%1&'5/#;$'.+56'&(14#0+6'/6*'.19'4241&7%6/#;$'5*+22'&+02.#%'1(6*'722'4 241&7%637#.+6;+56*'5#/' ⇟ภ 01 +056#..#6+10/#6'4+#.5 Ꮏ᧚ᢱ %1&'01 A-6 5'.(6#22+0)5%4'9 㩎㩡㩇㩊㨹㩕㩩㩧㩒㩆㩨ޓ㩆㨷 ฬޓޓ⒓ 0#/' :575 %1&' 01 :575 㧲㨁㧾㨁㧺㧻ޓ㧱㧸㧱㧯㨀㧾㧵㧯ޓ㧯㧻ޓ㧚㧘㧸㨀㧰 㧔⇛࿑ߩኸᴺߪޔෳ⠨୯ߢߔ&ޓޕ+/'05+105+0&4#9+0)(144'('4'0%'10.;㧕 &;: ဳᑼ㩄㨺㩎㩨⇟ภ߇㧞Ბߩ႐วޔਅᲑࠃࠅᲑߦઍࠊࠆㆊᷰᦼຠߢࠅޔ߅ߥޓޕߔ߹ߡߞ߇߆ࠄߜߤޔຠ⾰ߪᄌࠊࠅ߹ߖ ࠎޕ 6916;2'5#0&%1&'5/#;$'.+56'&(14#0+6'/6*'.19'4241&7%6/#;$'5*+22'&+02.#%'1(6*'722'4 241&7%637#.+6;+56*'5#/' ⇟ภ 01 9#5*'4 㩘㩩㩢㩀㩦㨹㩆㨶㨺 5'.(6#22+0)5%4'9 㩎㩡㩇㩊㨹㩕㩩㩧㩒㩆㩨㩆㨷 ฬޓޓ⒓ 0#/' ⇛ޓޓ࿑ 176.+0' ဳฬ㧛ⷙᩰ &'5%4+26+105 (2 %1&'01 / %1&'01 :575 6;2' %1&'01 ᢙ㊂ 36; ↪ㅜ㧛⠨ 4'/#4-5 &<: A-8 㧲㨁㧾㨁㧺㧻ޓ㧱㧸㧱㧯㨀㧾㧵㧯ޓ㧯㧻ޓ㧚㧘㧸㨀㧰 㧔⇛࿑ߩኸᴺߪޔෳ⠨୯ߢߔ&ޓޕ+/'05+105+0&4#9+0)(144'('4'0%'10.;㧕 &<: 6916;2'5#0&%1&'5/#;$'.+56'&(14#0+6'/6*'.19'4241&7%6/#;$'5*+22'&+02.#%'1(6*'722'4241&7%6 37#.+6;+56*'5#/' ဳᑼ㩄㨺㩎㩨⇟ภ߇㧞Ბߩ႐วޔਅᲑࠃࠅᲑߦઍࠊࠆㆊᷰᦼຠߢࠅޔ߅ߥޓޕߔ߹ߡߞ߇߆ࠄߜߤޔຠ⾰ߪᄌࠊࠅ߹ߖࠎޕ ⇟ภ 01 #%%'5514+'5 ↪ㅜ㧛⠨ 4'/#4-5 +056#..#6+10/#6'4+#.5 ᢙ㊂ 36; &;: ઃዻຠ ဳฬ㧛ⷙᩰ &'5%4+26+105 %2 6;2' Ꮏ᧚ᢱ ⇛ޓޓ࿑ 176.+0' %1&'01 A-7 ⇟ภ 01 5'#. 㩖㩨㩡㨼㩧㩎㩨㩆㨺㩣 ⇛ޓޓ࿑ 176.+0' 4$ %1&'01 %1&'01 :575 %1&'01 / ဳฬ㧛ⷙᩰ &'5%4+26+105 (2 6;2' ᢙ㊂ 36; '%: ↪ㅜ㧛⠨ 4'/#4-5 '%: 㧲㨁㧾㨁㧺㧻ޓ㧱㧸㧱㧯㨀㧾㧵㧯ޓ㧯㧻ޓ㧚㧘㧸㨀㧰 㧔⇛࿑ߩኸᴺߪޔෳ⠨୯ߢߔ&ޓޕ+/'05+105+0&4#9+0)(144'('4'0%'10.;㧕 5'.(6#22+0)5%4'9 㩎㩡㩇㩊㨹㩕㩩㩧㩒㩆㩨 9#5*'4 㩘㩩㩢㩀㩦㨹㩆㨶㨺 ฬޓޓ⒓ 0#/' #%%'5514+'5 ઃዻຠ %1&'01 A-9 (75' 㩕㨷㨺㩇㩨 ()$1# #%8 2'4 8'5 '%: 52#4' 5'652'4 8'55'. 4'/#4-5%1&'01 㧔⇛࿑ߩኸᴺߪޔෳ⠨୯ߢߔ&ޓޕ+/'05+105+0&4#9+0)(ޓ144'('4'0%'10.;㧕 &9)01 2'4 5'6 914-+0) 37#06+6; 75' 52 6;2' &9)01 14 6;2'01 (74701'.'%64+%%1.6& 176.+0' 52#4'2#465.+56(14 0#/'1( 2#46 /(450#/' +6'/ 01 5*+201 '%: $1:012 %1&'01 A-10 0#/' &1%7/'06 6+% +/ 15 1/ %2 (2 *5 (2 4%0# &'5%4+26+10%1&'ͳ 36; A-11 䋨⇛࿑䈱ኸᴺ䈲䇮ෳ⠨୯䈪䈜䇯㩷㩷㪛㪠㪤㪜㪥㪪㪠㪦㪥㪪㩷㪠㪥㩷㪛㪩㪘㪮㪠㪥㪞㩷㪝㪦㪩㩷㪩㪜㪝㪜㪩㪜㪥㪚㪜㩷㪦㪥㪣㪰㪅䋩 '%: 㪫㪮㪦㩷㪫㪰㪧㪜㪪㩷㪘㪥㪛㩷㪚㪦㪛㪜㪪㩷㪤㪘㪰㩷㪙㪜㩷㪣㪠㪪㪫㪜㪛㩷㪝㪦㪩㩷㪘㪥㩷㪠㪫㪜㪤㪅㩷㩷㪫㪟㪜㩷㪣㪦㪮㪜㪩㩷㪧㪩㪦㪛㪬㪚㪫㩷㪤㪘㪰㩷㪙㪜㩷㪪㪟㪠㪧㪧㪜㪛㩷㪠㪥㩷㪧㪣㪘㪚㪜㩷㪦㪝㩷㪫㪟㪜㩷㪬㪧㪧㪜㪩㩷 㪧㪩㪦㪛㪬㪚㪫㪅㩷㪨㪬㪘㪣㪠㪫㪰㩷㪠㪪㩷㪫㪟㪜㩷㪪㪘㪤㪜㪅 ဳᑼ㪆䍘䍎䍢䍼⇟ภ䈏䋲Ბ䈱႐ว䇮ਅᲑ䉋䉍Ბ䈮ઍ䉒䉎ㆊᷰᦼຠ䈪䈅䉍䇮䈬䈤䉌䈎䈏䈦䈩䈇䉁䈜䇯䇭䈭䈍䇮ຠ⾰䈲ᄌ䉒䉍䉁䈞䉖䇯 䍘㪄䍢䍼⇟ภᧃየ䈱㪲㪁㪁㪴䈲䇮ㆬᛯຠ䈱ઍ䍘䍎䍢䍼䉕䈚䉁䈜䇯 㪚㪦㪛㪜㩷㪥㪬㪤㪙㪜㪩㩷㪜㪥㪛㪠㪥㪞㩷㪮㪠㪫㪟㩷㩹㪁㪁㩹㩷㪠㪥㪛㪠㪚㪘㪫㪜㪪㩷㪫㪟㪜㩷㪚㪦㪛㪜㩷㪥㪬㪤㪙㪜㪩㩷㪦㪝㩷㪩㪜㪧㪩㪜㪪㪜㪥㪫㪘㪫㪠㪭㪜㩷㪤㪘㪫㪜㪩㪠㪘㪣㪅 &+564'55241%'&74' ㆣ㔍ㅢାⷐ㗔ᦠ 176.+0' +056#..#6+10/#6'4+#.5 #%%'5514+'5 70+6 8*(/(&+564'55#.'46(.19 ㆣ㔍⼊ႎ㩖㩥 8*(/( +056#..#6+10/#07#. ⵝⷐ㗔ᦠ 12'4#6145)7+&' ᠲⷐ㗔ᦠ 12'4#6145/#07#. ขᛒ⺑ᦠ ࿑ᦠ +056#..#6+10/#6'4+#.5 Ꮏ᧚ᢱ Ꮏ᧚ᢱ $4#%-'6(14*#0&5'6 㩔㩧㩎㩨㩈㨹㩎㩔㩧㩀㩨㨺⚵ຠ *#0&5'6 㩔㩧㩎㩨㩈㨹㩎 ઃዻຠ 8*(%1051.' 8*(㩄㩧㩉㨺㩣 ࡙࠾࠶࠻ 4%0#*- 㧼㧭㧯㧷㧵㧺㧳ޓ㧸㧵㧿㨀 '%: ⇟ภ 01 %#$.'#55; 㩚㩐㩕㩩㩧⚵ຠ ⇛ޓޓ࿑ 176.+0' %1&'01 . ဳฬ㧛ⷙᩰ &'5%4+26+105 %2 6;2' ᢙ㊂ 36; '%: Used only Japan ↪ㅜ㧛⠨ 4'/#4-5 '%: 㧲㨁㧾㨁㧺㧻ޓ㧱㧸㧱㧯㨀㧾㧵㧯ޓ㧯㧻ޓ㧚㧘㧸㨀㧰 㧔⇛࿑ߩኸᴺߪޔෳ⠨୯ߢߔ&ޓޕ+/'05+105+0&4#9+0)(144'('4'0%'10.;㧕 ฬޓޓ⒓ 0#/' +056#..#6+10/#6'4+#.5 Ꮏ᧚ᢱ %1&'01 A-12 176.+0' +056#..#6+10/#6'4+#.5 70+6 %2 4%0 &'5%4+26+10%1&'ͳ '%: '%: 㧔⇛࿑ߩኸᴺߪޔෳ⠨୯ߢߔ&ޕ+/'05+105+0&4#9+0)(144'('4'0%'10.;㧕 䍘㪄䍢䍼⇟ภᧃየ䈱㪲㪁㪁㪴䈲䇮ㆬᛯຠ䈱ઍ䍘䍎䍢䍼䉕䈚䉁䈜䇯 㪚㪦㪛㪜㩷㪥㪬㪤㪙㪜㪩㩷㪜㪥㪛㪠㪥㪞㩷㪮㪠㪫㪟㩷㩹㪁㪁㩹㩷㪠㪥㪛㪠㪚㪘㪫㪜㪪㩷㪫㪟㪜㩷㪚㪦㪛㪜㩷㪥㪬㪤㪙㪜㪩㩷㪦㪝㩷㪩㪜㪧㪩㪜㪪㪜㪥㪫㪘㪫㪠㪭㪜㩷㪤㪘㪫㪜㪩㪠㪘㪣㪅 +056#..#6+10/#6'4+#.5 Ꮏ᧚ᢱ Ꮏ᧚ᢱ %1051.'-+6 㩄㩧㩉㨺㩣⚵ຠ ࡙࠾࠶࠻ 0#/' 4%04%# 㧼㧭㧯㧷㧵㧺㧳ޓ㧸㧵㧿㨀 36; A-13 ⇟ภ 01 %#$.'#55; 㩚㩐㩕㩩㩧⚵ຠ %#$.'#55; 㩃㨺㩖㩨㩣⚵ຠ ⇛ޓޓ࿑ 176.+0' %1&'01 . %1&'01 &57$/2*:. ဳฬ㧛ⷙᩰ &'5%4+26+105 %2 6;2' ᢙ㊂ 36; '%: ↪ㅜ㧛⠨ 4'/#4-5 '%: 㧲㨁㧾㨁㧺㧻ޓ㧱㧸㧱㧯㨀㧾㧵㧯ޓ㧯㧻ޓ㧚㧘㧸㨀㧰 㧔⇛࿑ߩኸᴺߪޔෳ⠨୯ߢߔ&ޓޕ+/'05+105+0&4#9+0)(144'('4'0%'10.;㧕 ฬޓޓ⒓ 0#/' +056#..#6+10/#6'4+#.5 Ꮏ᧚ᢱ %1&'01 A-14 0#/' &1%7/'06 %) 8%6(:%/ ,' %2 22 &'5%4+26+10%1&'ͳ '%: 䋨⇛࿑䈱ኸᴺ䈲䇮ෳ⠨୯䈪䈜䇯㩷㩷㪛㪠㪤㪜㪥㪪㪠㪦㪥㪪㩷㪠㪥㩷㪛㪩㪘㪮㪠㪥㪞㩷㪝㪦㪩㩷㪩㪜㪝㪜㪩㪜㪥㪚㪜㩷㪦㪥㪣㪰㪅䋩 '%: A-15 36; 㪫㪮㪦㩷㪫㪰㪧㪜㪪㩷㪘㪥㪛㩷㪚㪦㪛㪜㪪㩷㪤㪘㪰㩷㪙㪜㩷㪣㪠㪪㪫㪜㪛㩷㪝㪦㪩㩷㪘㪥㩷㪠㪫㪜㪤㪅㩷㩷㪫㪟㪜㩷㪣㪦㪮㪜㪩㩷㪧㪩㪦㪛㪬㪚㪫㩷㪤㪘㪰㩷㪙㪜㩷㪪㪟㪠㪧㪧㪜㪛㩷㪠㪥㩷㪧㪣㪘㪚㪜㩷㪦㪝㩷㪫㪟㪜㩷㪬㪧㪧㪜㪩㩷 㪧㪩㪦㪛㪬㪚㪫㪅㩷㪨㪬㪘㪣㪠㪫㪰㩷㪠㪪㩷㪫㪟㪜㩷㪪㪘㪤㪜㪅 ဳᑼ㪆䍘䍎䍢䍼⇟ภ䈏䋲Ბ䈱႐ว䇮ਅᲑ䉋䉍Ბ䈮ઍ䉒䉎ㆊᷰᦼຠ䈪䈅䉍䇮䈬䈤䉌䈎䈏䈦䈩䈇䉁䈜䇯䇭䈭䈍䇮ຠ⾰䈲ᄌ䉒䉍䉁䈞䉖䇯 176.+0'&4#9+0) ,2'0 ᄖኸ࿑㧔⧷㧕 ࿑ᦠ 176.+0' +056#..#6+10/#6'4+#.5 70+6 219'4%#$.' (14&%/#+05 㔚Ḯ㩃㨺㩖㩨㩣㧰㧯↪ %#$.'#55; 㩃㨺㩖㩨㩣⚵ຠ Ꮏ᧚ᢱ 24+06'470+6 㩖㩩㩢㩧㩊 ࡙࠾࠶࠻ 22 㧼㧭㧯㧷㧵㧺㧳ޓ㧸㧵㧿㨀 000-151-711-12 05S9371-2 005-377-800-00 CP05-09901 000-054-223-00 HS-2003-15 005-951-790-00 FP05-05510 005-951-920-00 FP05-05511 005-377-820-00 SP05-05501 000-054-404-00 FM-8800S-R 1 Q'TY 1 1 CP05-09900 1 1 1 FP05-05700 1 SP05-05501 DESCRIPTION/CODE № FM-8800S-R-HS-N (略図の寸法は、参考値です。 DIMENSIONS IN DRAWING FOR REFERENCE ONLY.) CABLE ASSY. ケーブル組品 OUTLINE INSTALLATION MATERIALS ACCESSORIES SPARE PARTS UNIT INSTALLATION MATERIALS 工事材料 工事材料 HANDSET ハンドセット BRACKET FOR HANDSET ハンドセットハンガー組品 ACCESSORIES 付属品 付属品 SPARE PARTS 予備品 予備品 TRANSCEIVER UNIT 送受信機 ユニット NAME PACKING LIST DOCUMENT OUTLINE 000-809-270-0* E52-00101-* 000-149-934-0* OSE-56420-* 000-149-932-0* IME-56420-* 000-161-430-0* OME-56421-* 000-149-935-0* TIC-56420-* DESCRIPTION/CODE № 1/1 1 1 1 1 1 Q'TY TWO TYPES AND CODES MAY BE LISTED FOR AN ITEM. THE LOWER PRODUCT MAY BE SHIPPED IN PLACE OF THE UPPER PRODUCT. QUALITY IS THE SAME. 05EC-X-9864 型式/コード番号が2段の場合、下段より上段に代わる過渡期品であり、どちらかが入っています。 なお、品質は変わりません。 VHF/MF DISTRESS ALERT FLOW 遭難警報フロ(VHF/MF) OPERATOR'S GUIDE 操作要領書 INSTALLATION MANUAL 装備要領書 OPERATOR'S MANUAL 取扱説明書 DISTRESS PROCEDURE 遭難通信要領書 図書 NAME 05EC-X-9864 -1 A-16 NAME DOCUMENT 000-149-934-0* OSE-56420-* 000-809-270-0* E52-00101-* 000-151-711-12 05S9371-2 005-377-800-00 CP05-09901 005-377-760-00 DM-2003-F 005-377-820-00 SP05-05501 000-054-404-00 FM-8800S-R 1 Q'TY 1 1 1 1 CP05-09900 1 FP05-05710 1 SP05-05501 DESCRIPTION/CODE № FM-8800S-R-MIC-N (略図の寸法は、参考値です。 DIMENSIONS IN DRAWING FOR REFERENCE ONLY.) OPERATOR'S GUIDE VHF/MF DISTRESS ALERT FLOW 操作要領書 遭難警報フロ(VHF/MF) 図書 CABLE ASSY. ケーブル組品 OUTLINE INSTALLATION MATERIALS ACCESSORIES SPARE PARTS UNIT INSTALLATION MATERIALS 工事材料 工事材料 MICROPHONE マイクロフォン箱詰品 付属品 SPARE PARTS 予備品 予備品 TRANSCEIVER UNIT 送受信機 ユニット PACKING LIST OUTLINE 000-149-935-0* TIC-56420-* 000-161-430-0* OME-56421-* 000-149-932-0* IME-56420-* DESCRIPTION/CODE № 1/1 1 1 1 Q'TY TWO TYPES AND CODES MAY BE LISTED FOR AN ITEM. THE LOWER PRODUCT MAY BE SHIPPED IN PLACE OF THE UPPER PRODUCT. QUALITY IS THE SAME. 05EC-X-9865 型式/コード番号が2段の場合、下段より上段に代わる過渡期品であり、どちらかが入っています。 なお、品質は変わりません。 DISTRESS PROCEDURE 遭難通信要領書 OPERATOR'S MANUAL 取扱説明書 INSTALLATION MANUAL 装備要領書 NAME 05EC-X-9865 -1 A-17 NAME OUTLINE INSTALLATION MATERIALS ACCESSORIES SPARE PARTS UNIT 000-151-711-12 05S9371-2 005-951-920-00 FP05-05511 005-951-790-00 FP05-05510 000-054-223-00 HS-2003-15 005-377-820-00 SP05-05501 000-054-404-00 FM-8800S-R 000-054-219-00 IF-8810 1 1 1 Q'TY 1 CP05-09900 1 1 1 FP05-05700 DESCRIPTION/CODE № FM-8800S-R-HS-A (略図の寸法は、参考値です。 DIMENSIONS IN DRAWING FOR REFERENCE ONLY.) CABLE ASSY. ケーブル組品 工事材料 ACCESSORIES 付属品 BRACKET FOR HANDSET ハンドセットハンガー組品 HANDSET ハンドセット 付属品 SPARE PARTS 予備品 予備品 TRANSCEIVER UNIT 送受信機 JUNCTION BOX セツゾクバコ ユニット PACKING LIST DOCUMENT 000-809-270-0* E52-00101-* 000-149-934-0* OSE-56420-* 000-149-932-0* IME-56420-* 000-161-430-0* OME-56421-* 000-149-935-0* TIC-56420-* 005-949-280-00 CP05-08701 005-377-800-00 CP05-09901 1 Q'TY 1 1 1 1 1 1 CP05-08701 DESCRIPTION/CODE № 1/1 TWO TYPES AND CODES MAY BE LISTED FOR AN ITEM. THE LOWER PRODUCT MAY BE SHIPPED IN PLACE OF THE UPPER PRODUCT. QUALITY IS THE SAME. 05EC-X-9866 型式/コード番号が2段の場合、下段より上段に代わる過渡期品であり、どちらかが入っています。 なお、品質は変わりません。 VHF/MF DISTRESS ALERT FLOW 遭難警報フロ(VHF/MF) OPERATOR'S GUIDE 操作要領書 INSTALLATION MANUAL 装備要領書 OPERATOR'S MANUAL 取扱説明書 DISTRESS PROCEDURE 遭難通信要領書 図書 OUTLINE INSTALLATION MATERIALS INSTALLATION MATERIALS 工事材料 工事材料 INSTALLATION MATERIALS 工事材料 NAME 05EC-X-9866 -0 A-18 NAME INSTALLATION MATERIALS 005-949-280-00 CP05-08701 000-151-711-12 05S9371-2 005-377-800-00 CP05-09901 005-377-760-00 DM-2003-F 005-377-820-00 SP05-05501 000-054-404-00 FM-8800S-R 000-054-219-00 IF-8810 1 1 Q'TY 1 CP05-08701 1 1 CP05-09900 1 FP05-05710 1 SP05-05501 DESCRIPTION/CODE № FM-8800S-R-MIC-A (略図の寸法は、参考値です。 DIMENSIONS IN DRAWING FOR REFERENCE ONLY.) INSTALLATION MATERIALS 工事材料 工事材料 CABLE ASSY. ケーブル組品 OUTLINE INSTALLATION MATERIALS ACCESSORIES SPARE PARTS UNIT INSTALLATION MATERIALS 工事材料 工事材料 MICROPHONE マイクロフォン箱詰品 付属品 SPARE PARTS 予備品 予備品 TRANSCEIVER UNIT 送受信機 JUNCTION BOX セツゾクバコ ユニット PACKING LIST NAME DOCUMENT OUTLINE 000-149-935-0* TIC-56420-* 000-161-430-0* OME-56421-* 000-149-932-0* IME-56420-* 000-149-934-0* OSE-56420-* 000-809-270-0* E52-00101-* DESCRIPTION/CODE № 1/1 1 1 1 1 1 Q'TY TWO TYPES AND CODES MAY BE LISTED FOR AN ITEM. THE LOWER PRODUCT MAY BE SHIPPED IN PLACE OF THE UPPER PRODUCT. QUALITY IS THE SAME. 05EC-X-9867 型式/コード番号が2段の場合、下段より上段に代わる過渡期品であり、どちらかが入っています。 なお、品質は変わりません。 DISTRESS PROCEDURE 遭難通信要領書 OPERATOR'S MANUAL 取扱説明書 INSTALLATION MANUAL 装備要領書 OPERATOR'S GUIDE VHF/MF DISTRESS ALERT FLOW 操作要領書 遭難警報フロ(VHF/MF) 図書 05EC-X-9867 -0 A-19 Y. Hatai D-1 Y. Hatai D-2 Y. Hatai D-3 D-4 Y. Hatai Y. Hatai D-5 Y. Hatai D-6 D-7 Y. Hatai D-8 Y. Hatai Apr.20'07 R.Esumi D-9 D-10 D-11 Feb.02'05 D-12 D-13 Nov.28'03 D-14 D-15 Dec.19,'06 R.Esumi D-16 Y. Hatai D-17 Dec.19'06 R.Esumi D-18 D-19 Dec.26'03 D-20 Dec.26'03 Y. Hatai D-21 Dec.26'06 R.Esumi D-22 A M-P-7 *1 RG-10/UY 1 2 M-P-7 1 2 ハンドセット HANDSET HS-2003 1 2 3 4 5 6 7 8 外部スピーカ EXT. SPEAKER SEM-21Q *2 2.8m B 24VDC *1 DPYC-4 AC DC + IN AC/DC OUT 電源ユニット + DC AC/DC POWER SUPPLY UNIT - IN PR-240 17JE-23250 PRINTER -02(D8C) 1 57FE-30360 -20N(D8) 16S0184,3m 1 C RM12BPE-3S J1 VCTF0.75x3C,5m 1 24V+ アカ RED (16S0084) 2 0V クロ BLK 3 GND シロ WHT FM14-2S VCTF0.75x2C,3m 1 シロ WHT (05S0441) 2 クロ BLK (+) (-) 11 12 13 14 15 16 17 18 19 20 21 22 VDR AF-H VDR AF-C DATA-A DATA-B LINE OUT-H LINE OUT-C LINE IN-H LINE IN-C W_MIC2-H W_MIC2-C W_SP2-H W_SP2-C W_PTT2-N 0V F.GND GND 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 25 *1 IV-2sq. ~ プリンタ PRINTER PP-510 *2 P P P P P 5m TXD-C RXD-H RXD-C F.GND EXT.ALM-N *6 0V F.GND W_MIC1-H W_MIC1-C W_SP1-H W_SP1-C W_PTT1-N 0V F.GND 2 3 4 5 6 7 8 9 10 11 12 13 14 15 W_MIC2-H W_MIC2-C W_SP2-H W_SP2-C W_PTT2-N 0V F.GND 16 17 18 19 20 21 22 VDR AF-H VDR AF-C J3 NOT USED_1 1 NOT USED_2 2 F.GND 3 4 +15VDC 5 0V 6 DATA-A 7 DATA-B 8 LINE IN-H 9 LINE IN-C 10 LINE OUT-H 11 LINE OUT-C 12 F.GND 13 NC 14 23 24 25 26 27 +15VDC 0V DATA-A DATA-B LINE IN-H LINE IN-C LINE OUT-H LINE OUT-C F.GND NC NC 38 39 40 41 42 43 44 45 46 47 48 J1 1 2 3 4 5 6 7 8 9 10 P P P P P P P P P P P P P 1 2 3 4 5 6 7 8 9 10 11 12 28 29 30 31 32 33 34 35 36 37 航法装置/プロッタ NAVIGATOR/PLOTTER *1 TTYCS-1,MAX.20m 外部アラーム EXTERNAL ALARM P ~ プリンタ PRINTER *2 PP-8800A S-1 6 P *4 *2 *4 CO-0.2x5P,MAX.20m アカ RED P キ YEL クロ BLK P キ YEL シロ WHT P キ YEL P P P *2 CO-0.2x5P,MAX.20m アカ RED キ YEL クロ BLK キ YEL シロ WHT キ YEL TB1 1 2 3 4 TB1 1 2 3 4 *1 TTYCS-1,MAX.20m マイクレセプタクル ボックス MIC RECEPTACLE BOX RBD-VHF(B) *2 マイクレセプタクル ボックス MIC RECEPTACLE BOX RBD-VHF(B) *2 VDR Wing Mic ハンドセット HANDSET *2 1 2 3 4 5 7 HS-6000FZ-11 HS-6000FZ-5 Wing Mic ハンドセット HANDSET *2 1 2 3 4 5 7 HS-6000FZ-11 HS-6000FZ-5 ハンドセット HANDSET ハンドセット HANDSET HS-8800/8800W *2 HS-8800/8800W *2 *4 終端まで最長50m *2 TOTAL 50m OR LESS TO TERMINATE 05S0309 シロ(太) WHT[B] P クロ(太) BLK[B] GRN ミドリ P BLU アオ アカ RED P チャ BRN キ YEL P ダイ ORG SHIELD *4 終端まで最長50m *2 TOTAL 50m OR LESS TO TERMINATE 05S0309 シロ(太) WHT[B] P クロ(太) BLK[B] GRN ミドリ P BLU アオ アカ RED P チャ BRN キ YEL P ダイ ORG SHIELD *4 TB1 1 2 3 4 5 6 7 8 TB2 1 リモートステーション 2 REMOTE STATION RB-8800/8810/8810W 3 *2 *3 4 <No.1> LINE IN-H 5 LINE IN-C 6 LINE OUT-H 7 LINE OUT-C 8 G 1 DMC I/F 2 IF-8820 *2 3 4 5 6 7 8 F.GND 9 F.GND 10 NC 11 12 13 14 15 16 17 18 19 TXD-H TXD-C RXD-H RXD-C F.GND 20 21 22 23 24 *1 IV-1.25sq. OR 1 または 24VDC 24VDC(+) 24VDC(-) XM2A-3701 J2 EXT.ALM-N 0V W_MIC1-H W_MIC1-C W_SP1-H W_SP1-C W_PTT1-N 0V 0V 0V 0V 0V SPKR SP-H SP-C RED BLK 保護アース PE *1 IV-2sq. 24VDC HANDSET S.GND PTT SW-N MIC-H MIC-C HS SP-H HOOK SW-N +5V F.GND 36 *1 100-115/ 200-230VAC DPYC-1.5 1φ,50/60Hz +15VDC 1 +15VDC 2 +15VDC 3 +15VDC 4 NC 5 NC 6 TXD-H 7 TXD-C 8 RXD-H 9 RXD-C 10 CH70 RX ANT J2 15A 05S9371,3m IEC61162-1(NMEA)/REMOTE TTYCS-4(*1) OR CO-0.2x2P (*2) 36 24VDC φ3.5 接続箱 JUNCTION BOX IF-8810 TXD-H 1 送受信機 TRANSCEIVER UNIT FM-8800D/S 5 *2 05S0309 シロ(太) クロ(太) ミドリ アオ アカ チャ キ ダイ SHIELD WHT[B] BLK[B] GRN BLU RED BRN YEL ORG 1 2 3 4 5 6 7 8 *2 05S0309 シロ(太) クロ(太) ミドリ アオ アカ チャ キ ダイ SHIELD WHT[B] BLK[B] GRN BLU RED BRN YEL ORG 1 2 3 4 5 6 7 8 TB1 *2 CO-0.2x2P,MAX.30m P P 10 CH70 WR用アンテナ *2 ANTENNA FOR CH70 WR *1 RG-10/UY ANT J1 4 1 T/R用アンテナ *2 ANTENNA FOR T/R 3 10 2 1 1 TB2 1 リモートステーション 2 REMOTE STATION RB-8800/8810/8810W 3 *2 *3 4 <No.2> 5 6 7 8 G TB1 リモートステーション REMOTE STATION RB-8800/8810/8810W *2 *5 リモートステーション REMOTE STATION RB-8800/8810/8810W <No.3/No.4> ハンドセット HANDSET *2 HS-8800/8800W *5 リモートステーション REMOTE STATION RB-8800/8810/8810W G 1 2 3 4 5 TB1/TB2 TXD-H TXD-C RXD-H RXD-C F.GND 遭難警報装置 DISTRESS MESSAGE CONTROLLER DMC-5 TITLE FM-8800D/S 名称 国際VHF無線電話装置 相互結線図 NAME VHF RADIOTELEPHONE INTERCONNECTION DIAGRAM *1 IV-1.25sq. D CO-0.2x2P: CO-SPEVV-SB-C 0.2x2P,φ10.5 CO-0.2x5P: CO-SPEVV-SB-C 0.2x5P,φ13.5 注記 *1)造船所手配。 *2)オプション。 *3)最大4台まで接続可能。 *4)ケーブルクランプで接地。 *5)終端ユニットは内部のジャンパー(J2,J3)をONにする。 *6)ノーマルクローズ、フローティング、最大80mA、耐圧≦50V。 NOTE *1. *2. *3. *4. *5. *6. SHIPYARD SUPPLY OPTION MAX. 4 SETS AVAILABLE GROUND THROUGH CABLE CLAMP. CONNECT JUMPERS (J2 & J3) ON TERMINATED REMOTE STATION. NORMAL CLOSE, FLOATING, MAX80mA, WITHSTAND VOLTAGE ≦50V. DRAWN May 15 '07 CHECKED May 15 '07 APPROVED SCALE T.YAMASAKI T.TAKENO May 17'07 R.Esumi MASS kg DWG No. C5642-C01- M FURUNO ELECTRIC CO., LTD. M-P-7 1 2 ハンドセット HANDSET HS-2003 1 2 3 4 5 6 7 8 外部スピーカ EXT. SPEAKER SEM-21Q *2 φ3.5 2.8m IEC61162-1(NMEA)/REMOTE +15VDC 1 +15VDC 2 +15VDC 3 +15VDC 4 NC 5 NC 6 TXD-H 7 TXD-C 8 RXD-H 9 RXD-C 10 CH70 RX ANT J2 HANDSET S.GND PTT SW-N MIC-H MIC-C HS SP-H HOOK SW-N +5V F.GND SPKR SP-H SP-C GND 24VDC(+) 24VDC(-) RED BLK P2 11 12 13 14 15 16 17 18 19 20 21 22 VDR AF-H VDR AF-C DATA-A DATA-B LINE OUT-H LINE OUT-C LINE IN-H LINE IN-C W_MIC2-H W_MIC2-C W_SP2-H W_SP2-C W_PTT2-N 0V F.GND 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 36 I/F 05P0541 J2 40 RACK CONSOLE ~ ~ ~ 40 J3 3 24V 2 1 0V 1 S1 J2 1 J2 J1 C CB 15A PRINTER 非常灯 EMERGENCY LAMP EMG-1T *2 TB1 1 2 3 4 5 6 7 8 EXT.ALM-N 0V W_MIC1-H W_MIC1-C W_SP1-H W_SP1-C W_PTT1-N 0V 0V 0V 0V 0V 1 24VDC *1 DPYC-2.5 P P P P P TXD-C RXD-H RXD-C F.GND EXT.ALM-N *6 0V F.GND W_MIC1-H W_MIC1-C W_SP1-H W_SP1-C W_PTT1-N 0V F.GND 2 3 4 5 6 7 8 9 10 11 12 13 14 15 W_MIC2-H W_MIC2-C W_SP2-H W_SP2-C W_PTT2-N 0V F.GND 16 17 18 19 20 21 22 VDR AF-H VDR AF-C J3 NOT USED_1 1 NOT USED_2 2 F.GND 3 4 +15VDC 5 0V 6 DATA-A 7 DATA-B 8 LINE IN-H 9 LINE IN-C 10 LINE OUT-H 11 LINE OUT-C 12 F.GND 13 NC 14 23 24 25 26 27 +15VDC 0V DATA-A DATA-B LINE IN-H LINE IN-C LINE OUT-H LINE OUT-C F.GND NC NC 38 39 40 41 42 43 44 45 46 47 48 J1 1 2 3 4 5 6 7 8 9 10 J2 B *1 IV-2sq. XM2A-3701 P P P P P P P P P P P P P 1 2 3 4 5 6 7 8 9 10 11 12 28 29 30 31 32 33 34 35 36 37 航法装置/プロッタ NAVIGATOR/PLOTTER *1 TTYCS-1,MAX.20m 外部アラーム EXTERNAL ALARM P P *4 *2 *4 CO-0.2x5P,MAX.20m アカ RED P キ YEL クロ BLK P キ YEL シロ WHT P キ YEL P P P *2 CO-0.2x5P,MAX.20m アカ RED キ YEL クロ BLK キ YEL シロ WHT キ YEL TB1 1 2 3 4 TB1 1 2 3 4 *1 TTYCS-1,MAX.20m マイクレセプタクル ボックス MIC RECEPTACLE BOX RBD-VHF(B) *2 マイクレセプタクル ボックス MIC RECEPTACLE BOX RBD-VHF(B) *2 Wing Mic ハンドセット HANDSET *2 1 2 3 4 5 7 HS-6000FZ-11 HS-6000FZ-5 Wing Mic ハンドセット HANDSET *2 1 2 3 4 5 7 HS-6000FZ-11 HS-6000FZ-5 ハンドセット HANDSET VDR ハンドセット HANDSET HS-8800/8800W *2 HS-8800/8800W *2 *4 終端まで最長50m *2 TOTAL 50m OR LESS TO TERMINATE 05S0309 シロ(太) WHT[B] P クロ(太) BLK[B] GRN ミドリ P BLU アオ アカ RED P チャ BRN キ YEL P ダイ ORG SHIELD *4 終端まで最長50m *2 TOTAL 50m OR LESS TO TERMINATE 05S0309 シロ(太) WHT[B] P クロ(太) BLK[B] GRN ミドリ P BLU アオ アカ RED P チャ BRN キ YEL P ダイ ORG SHIELD *4 TB1 1 2 3 4 5 6 7 8 TB2 1 リモートステーション 2 REMOTE STATION RB-8800/8810/8810W 3 *2 *3 4 <No.1> LINE IN-H 5 LINE IN-C 6 LINE OUT-H 7 LINE OUT-C 8 G 1 DMC I/F 2 IF-8820 *2 3 4 5 6 7 8 F.GND 9 F.GND 10 NC 11 12 13 14 15 16 17 18 19 TXD-H TXD-C RXD-H RXD-C F.GND 20 21 22 23 24 *1 IV-1.25sq. プリンタ PRINTER UTP-80FK *2 05S0309 シロ(太) クロ(太) ミドリ アオ アカ チャ キ ダイ SHIELD WHT[B] BLK[B] GRN BLU RED BRN YEL ORG 1 2 3 4 5 6 7 8 *2 05S0309 シロ(太) クロ(太) ミドリ アオ アカ チャ キ ダイ SHIELD WHT[B] BLK[B] GRN BLU RED BRN YEL ORG 1 TB1 2 リモートステーション 3 REMOTE STATION RB-8800/8810/8810W 4 *2 5 6 7 8 G TB1 *2 CO-0.2x2P,MAX.30m P P 10 *1 RG-10/UY 1 2 TTYCS-4(*1) OR CO-0.2x2P (*2) S-2 6 1 CH70 WR用アンテナ *2 ANTENNA FOR CH70 WR M-P-7 5 1 A *1 RG-10/UY 接続箱 JUNCTION BOX IF-8810 TXD-H 1 送受信機 TRANSCEIVER UNIT FM-8800D/S ANT J1 4 10 T/R用アンテナ *2 ANTENNA FOR T/R 3 1 2 25 1 1 2 3 4 5 TB2 1 リモートステーション 2 REMOTE STATION RB-8800/8810/8810W 3 *2 *3 4 <No.2> 5 6 7 8 G TB1/TB2 TXD-H TXD-C RXD-H RXD-C F.GND *5 リモートステーション REMOTE STATION RB-8800/8810/8810W <No.3/No.4> ハンドセット HANDSET *2 HS-8800/8800W *5 リモートステーション REMOTE STATION RB-8800/8810/8810W 遭難警報装置 DISTRESS MESSAGE CONTROLLER DMC-5 D CO-0.2x2P: CO-SPEVV-SB-C 0.2x2P,φ10.5 CO-0.2x5P: CO-SPEVV-SB-C 0.2x5P,φ13.5 注記 *1)造船所手配。 *2)オプション。 *3)最大4台まで接続可能。 *4)ケーブルクランプで接地。 *5)終端ユニットは内部のジャンパー(J2,J3)をONにする。 *6)ノーマルクローズ、フローティング、最大80mA、耐圧≦50V。 NOTE *1. *2. *3. *4. *5. *6. SHIPYARD SUPPLY OPTION MAX. 4 SETS AVAILABLE GROUND THROUGH CABLE CLAMP. CONNECT JUMPERS (J2 & J3) ON TERMINATED REMOTE STATION. NORMAL CLOSE, FLOATING, MAX80mA, WITHSTAND VOLTAGE ≦50V. DRAWN Jan. 29 '07 CHECKED Jan. 29 '07 APPROVED SCALE T.YAMASAKI T.TAKENO RC-8800D/S-A (FM-8800D/S) 名称 国際VHF無線電話装置(ラック組込) 相互結線図 NAME VHF RADIOTELEPHONE (RACK CONSOLE) INTERCONNECTION DIAGRAM Feb.2'07 R.Esumi MASS kg DWG No. TITLE C5642-C02- F FURUNO ELECTRIC CO., LTD. 1 2 T/R用アンテナ *2 ANTENNA FOR T/R 3 *1 RG-10/UY M-P-7 CH70 WR用アンテナ *2 ANTENNA FOR CH70 WR *1 RG-10/UY A 1 2 M-P-7 1 2 ハンドセット HANDSET HS-2003 24VDC *1 DPYC-1.5 *1 DPYC-4 AC IN + DC - IN φ3.5 15A 05S9371,3m 24VDC 100-115/ 200-230VAC 1φ,50/60Hz 2.8m RED BLK IEC61162-1(NMEA)/REMOTE +15VDC 2 +15VDC 3 +15VDC 4 NC 5 NC 6 TXD-H 7 TXD-C 8 RXD-H 9 RXD-C 10 EXT.ALM-N 11 *5 0V 12 HANDSET S.GND PTT SW-N MIC-H MIC-C HS SP-H HOOK SW-N +5V F.GND W_MIC1-H W_MIC1-C W_SP1-H W_SP1-C W_PTT1-N 0V 0V 0V 0V VDR AF-H VDR AF-C SPKR SP-H SP-C 24VDC(+) 24VDC(-) DC + AC/DC OUT 電源ユニット AC/DC POWER SUPPLY UNIT PR-240 1 19 25 26 27 28 29 30 W_MIC2-H W_MIC2-C W_SP2-H W_SP2-C W_PTT2-N 0V F.GND 31 32 33 34 35 36 37 24VDC 24VDC FM14-2S VCTF0.75x2C,3m 1 シロ WHT (05S0441) 2 クロ BLK (+) (-) S-3 XM2A-3701 TTYCS-4(*1) OR CO-0.2x2P (*2) 航法装置/プロッタ NAVIGATOR/PLOTTER P P *1 TTYCS-1,MAX.20m 外部アラーム EXTERNAL ALARM *2 CO-0.2x5P,MAX.20m アカ RED P キ YEL クロ BLK P キ YEL シロ WHT P キ YEL *1 TTYCS-1,MAX.20m *2 05S0309 P P P P TB1 1 2 3 4 マイクレセプタクル ボックス MIC RECEPTACLE BOX RBD-VHF(B) *2 ハンドセット HANDSET *2 1 2 3 4 5 7 HS-6000FZ-11 HS-6000FZ-5 Wing Mic VDR 終端まで最長50m TOTAL 50m OR LESS TO TERMINATE シロ(太) クロ(太) ミドリ アオ アカ チャ キ ダイ SHIELD *2 CO-0.2x5P,MAX.20m アカ RED P キ YEL クロ BLK P キ YEL シロ WHT P キ YEL WHT[B] BLK[B] GRN BLU RED BRN YEL ORG TB1 1 2 3 4 1 DMC I/F 2 IF-8820 *2 3 4 5 TXD-H 6 TXD-C 7 RXD-H 8 RXD-C 9 F.GND F.GND 10 NC マイクレセプタクル ボックス MIC RECEPTACLE BOX RBD-VHF(B) *2 1 2 3 4 5 7 *2 CO-0.2x2P,MAX.30m P 20 21 22 23 24 P 1 2 3 4 5 TB1/TB2 TXD-H TXD-C RXD-H RXD-C F.GND 遭難警報装置 DISTRESS MESSAGE CONTROLLER DMC-5 ハンドセット HANDSET *2 HS-6000FZ-11 HS-6000FZ-5 Wing Mic GND プリンタ PRINTER PP-510 *2 *1 IV-2sq. OR 1 または 6 ~ 36 C 25 36 57FE-30360 -20N(D8) 1 17JE-23250 PRINTER 16S0184,3m -02(D8C) 1 ~ 13 14 15 16 17 18 20 21 22 23 24 +15VDC 0V DATA-A DATA-B LINE OUT-H LINE OUT-C LINE IN-H LINE IN-C 保護アース PE *1 IV-2sq. RM12BPE-3S J1 VCTF0.75x3C,5m 1 24V+ アカ RED (16S0084) 2 0V クロ BLK 3 GND シロ WHT 5 送受信機 TRANSCEIVER UNIT FM-8800D/S CH70 RX ANT J2 1 2 3 4 5 6 7 8 外部スピーカ EXT. SPEAKER SEM-21Q *2 B ANT J1 4 プリンタ PRINTER *2 PP-8800A *1 IV-1.25sq. D CO-0.2x2P: CO-SPEVV-SB-C 0.2x2P,φ10.5 CO-0.2x5P: CO-SPEVV-SB-C 0.2x5P,φ13.5 注記 *1)造船所手配。 *2)オプション。 *3)最大4台まで接続可能。 *4)ケーブルクランプで接地。 *5)ノーマルクローズ、フローティング、最大80mA、耐圧≦50V。 NOTE *1. *2. *3. *4. *5. SHIPYARD SUPPLY OPTION MAX. 4 SETS AVAILABLE GROUND THROUGH CABLE CLAMP. NORMAL CLOSE, FLOATING, MAX80mA, WITHSTAND VOLTAGE ≦50V. DRAWN May 15 '07 CHECKED May 15 '07 APPROVED SCALE T.YAMASAKI T.TAKENO FM-8800D/S 名称 国際VHF無線電話装置(接続箱なし) 相互結線図 NAME VHF RADIOTELEPHONE (W/O JUNCTION BOX) INTERCONNECTION DIAGRAM May 17'07R.Esumi MASS kg DWG No. TITLE C5642-C03- E FURUNO ELECTRIC CO., LTD. *1 RG-10/UY M-P-7 ハンドセット HANDSET HS-2003 1 2 1 2 1 2 3 4 5 6 7 8 外部スピーカ EXT. SPEAKER SEM-21Q *2 φ3.5 2.8m IEC61162-1(NMEA)/REMOTE +15VDC 1 +15VDC 2 +15VDC 3 +15VDC 4 NC 5 NC 6 TXD-H 7 TXD-C 8 RXD-H 9 RXD-C 10 CH70 RX ANT J2 HANDSET S.GND PTT SW-N MIC-H MIC-C HS SP-H HOOK SW-N +5V F.GND SPKR SP-H SP-C GND CB 15A RED BLK 24VDC(+) 24VDC(-) EXT.ALM-N 0V W_MIC1-H W_MIC1-C W_SP1-H W_SP1-C W_PTT1-N 0V 0V 0V 0V 0V 11 12 13 14 15 16 17 18 19 20 21 22 VDR AF-H VDR AF-C DATA-A DATA-B LINE OUT-H LINE OUT-C LINE IN-H LINE IN-C W_MIC2-H W_MIC2-C W_SP2-H W_SP2-C W_PTT2-N 0V F.GND 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 1 非常灯 EMERGENCY LAMP EMG-1T *2 TB1 1 2 3 4 5 6 7 8 PRINTER 24VDC *1 DPYC-2.5 36 ~ P P P P TXD-C RXD-H RXD-C F.GND EXT.ALM-N *6 0V F.GND W_MIC1-H W_MIC1-C W_SP1-H W_SP1-C W_PTT1-N 0V F.GND 2 3 4 5 6 7 8 9 10 11 12 13 14 15 W_MIC2-H W_MIC2-C W_SP2-H W_SP2-C W_PTT2-N 0V F.GND 16 17 18 19 20 21 22 VDR AF-H VDR AF-C J3 NOT USED_1 1 NOT USED_2 2 F.GND 3 4 +15VDC 5 0V 6 DATA-A 7 DATA-B 8 LINE IN-H 9 LINE IN-C 10 LINE OUT-H 11 LINE OUT-C 12 F.GND 13 NC 14 23 24 25 26 27 +15VDC 0V DATA-A DATA-B LINE IN-H LINE IN-C LINE OUT-H LINE OUT-C F.GND NC NC 38 39 40 41 42 43 44 45 46 47 48 J1 1 2 3 4 5 6 7 8 9 10 ~ P P P P P P P P P P P P P 1 2 3 4 5 6 7 8 9 10 11 12 28 29 30 31 32 33 34 35 36 37 航法装置/プロッタ NAVIGATOR/PLOTTER *1 TTYCS-1,MAX.20m 外部アラーム EXTERNAL ALARM P P *4 *2 *4 CO-0.2x5P,MAX.20m アカ RED P キ YEL クロ BLK P キ YEL シロ WHT P キ YEL P P P *2 CO-0.2x5P,MAX.20m アカ RED キ YEL クロ BLK キ YEL シロ WHT キ YEL HS-6000FZ-11 HS-6000FZ-5 Wing Mic ハンドセット HANDSET *2 1 2 3 4 5 7 TB1 マイクレセプタクル 1 ボックス 2 MIC RECEPTACLE 3 BOX 4 RBD-VHF(B) *2 *1 TTYCS-1,MAX.20m Wing Mic ハンドセット HANDSET *2 1 2 3 4 5 7 TB1 マイクレセプタクル 1 ボックス 2 MIC RECEPTACLE 3 BOX 4 RBD-VHF(B) *2 HS-6000FZ-11 HS-6000FZ-5 ハンドセット HANDSET VDR ハンドセット HANDSET HS-8800/8800W *2 HS-8800/8800W *2 *4 終端まで最長50m *2 TOTAL 50m OR LESS TO TERMINATE 05S0309 シロ(太) WHT[B] P クロ(太) BLK[B] GRN ミドリ P BLU アオ アカ RED P チャ BRN キ YEL P ダイ ORG SHIELD *4 終端まで最長50m *2 TOTAL 50m OR LESS TO TERMINATE 05S0309 シロ(太) WHT[B] P クロ(太) BLK[B] GRN ミドリ P BLU アオ アカ RED P チャ BRN キ YEL P ダイ ORG SHIELD *4 TB1 1 2 3 4 5 6 7 8 TB2 1 リモートステーション 2 REMOTE STATION RB-8800/8810/8810W 3 *2 *3 4 <No.1> LINE IN-H 5 LINE IN-C 6 LINE OUT-H 7 LINE OUT-C 8 G 1 DMC I/F 2 IF-8820 *2 3 4 5 6 7 8 F.GND 9 F.GND 10 NC 11 12 13 14 15 16 17 18 19 TXD-H TXD-C RXD-H RXD-C F.GND 20 21 22 23 24 *1 IV-1.25sq. 1 1 J2 40 J7 1 2 3 4 ~ 40 I/F 05P0541 J6 J3 3 24V 2 1 0V J2 1 C S1 P J2 B *1 IV-2sq. XM2A-3701 TTYCS-4(*1) OR CO-0.2x2P (*2) S-4 6 *2 05S0309 シロ(太) クロ(太) ミドリ アオ アカ チャ キ ダイ SHIELD WHT[B] BLK[B] GRN BLU RED BRN YEL ORG 1 2 3 4 5 6 7 8 *2 05S0309 シロ(太) クロ(太) ミドリ アオ アカ チャ キ ダイ SHIELD WHT[B] BLK[B] GRN BLU RED BRN YEL ORG 1 TB1 2 リモートステーション 3 REMOTE STATION RB-8800/8810/8810W 4 *2 5 6 7 8 G TB1 *2 CO-0.2x2P,MAX.30m P P 10 CH70 WR用アンテナ *2 ANTENNA FOR CH70 WR M-P-7 接続箱 JUNCTION BOX IF-8810 TXD-H 1 送受信機 TRANSCEIVER UNIT FM-8800D/S 5 1 A *1 RG-10/UY ANT J1 4 10 T/R用アンテナ *2 ANTENNA FOR T/R 3 1 2 25 1 1 2 3 4 5 TB2 1 リモートステーション 2 REMOTE STATION RB-8800/8810/8810W 3 *2 *3 4 <No.2> 5 6 7 8 G TB1/TB2 TXD-H TXD-C RXD-H RXD-C F.GND *5 リモートステーション REMOTE STATION RB-8800/8810/8810W <No.3/No.4> ハンドセット HANDSET *2 HS-8800/8800W *5 リモートステーション REMOTE STATION RB-8800/8810/8810W 遭難警報装置 DISTRESS MESSAGE CONTROLLER DMC-5 プリンタ PRINTER UTP-58E RACK CONSOLE D CO-0.2x2P: CO-SPEVV-SB-C 0.2x2P,φ10.5 CO-0.2x5P: CO-SPEVV-SB-C 0.2x5P,φ13.5 注記 *1)造船所手配。 *2)オプション。 *3)最大4台まで接続可能。 *4)ケーブルクランプで接地。 *5)終端ユニットは内部のジャンパー(J2,J3)をONにする。 *6)ノーマルクローズ、フローティング、最大80mA、耐圧≦50V。 NOTE *1. *2. *3. *4. *5. *6. SHIPYARD SUPPLY OPTION MAX. 4 SETS AVAILABLE GROUND THROUGH CABLE CLAMP. CONNECT JUMPERS (J2 & J3) ON TERMINATED REMOTE STATION. NORMAL CLOSE, FLOATING, MAX80mA, WITHSTAND VOLTAGE ≦50V. DRAWN Jan. 29 '07 CHECKED Jan. 29 '07 APPROVED SCALE T.YAMASAKI T.TAKENO RC-8800D/S-B (FM-8800D/S) 名称 国際VHF無線電話装置(ラック組込) 相互結線図 NAME VHF RADIOTELEPHONE (RACK CONSOLE) INTERCONNECTION DIAGRAM Feb.2'07 R.Esumi MASS kg DWG No. TITLE C5642-C04- A FURUNO ELECTRIC CO., LTD.