Download inbay_troubleshooting-2
Transcript
Bedienungsanleitung Inbay- Ladebecher / Inbay- Ablagefächer User manual Inbay charging cup / Inbay pockets www.inbay.systems Inbaywww.inbay.systems Bedienungsanleitung Inbay- Ladebecher / Inbay- Ablagefächer User Manual Inbay Charger Cup / Inbay pockets Mit dem Inbay Ladesystem sind Sie in der Lage, jedes Qi-fähige Smartphone ohne lästige Ladekabel aufzuladen. The Inbay wireless charging system enables you to charge any Qi-compatible smartphone without any annoying cables Smartphones, welche den Qi-Standard nicht ab Werk unterstützen, können mittels eines Ladecovers bzw. Qi-Receivers nachgerüstet werden. Smartphones which do not support the Qi-standard can be upgraded using a charging cover or Qi-receiver. Eine Liste der verfügbaren Ladecover finden Sie auf www.inbay.systems A list of available charging covers can be found at www.inbay.systems Zum Laden muss das Smartphone in das Inbay Ablagefach / den Ladebecher gelegt und auf der Gummimatte positioniert werden. To charge the smartphone insert it into the Inbay pocket / or charging cup - directly over the rubber mat Im Ruhezustand der Ladeschale oder des Ladebechers leuchtet die StatusLED rot. Beim Start des Ladevorgangs wechselt die LED von rot zu blau und es ist einmalig ein Piepton zu hören. In idle mode of the Inbay pocket or charging cup the status LED lights red. When charging starts the status LED turns from red to blue and you hear once an acoustic signal Wenn der Ladevorgang beendet ist, wird das Smartphone weiterhin mit einer Haltespannung versorgt. When charging is completed the smartphone continuous to be supplied with power Sollten Sie einmal Probleme mit Ihrem Inbay-System haben, so werfen sie bitte einen Blick auf die folgende Tabelle. In case of any trouble with your Inbay-System please take a look at the troubleshooting chart below Beschreibung die LED leuchtet nicht die LED leuchtet rot die LED blinkt abwechselnd rot und blau Es erscheint die Fehlermeldung „Dieses Zubehör wird evtl. nicht unterstützt“ Erklärung/Lösung Zündung eingeschaltet? Bitte überprüfen Sie den korrekten Anschluss Kein Qi- kompatibler Empfänger gefunden, oder das Smartphone ist nicht korrekt positioniert Das Smartphone liegt nicht genau über der Spule und muss neu positioniert werden Dies signalisiert nur den abgeschlossenen Ladeprozess Ab sofort wird die Ladung des Smartphones aufrecht erhalten Description Explanation/Solution Ignigiton switched on? LED is not illuminated Please check connectors No Qi-compatible receiver found, or LED is illuminated red smartphone is not correctly positioned Smartphone is not positioned direcly over LED blinks alternately red and blue the spool and has to be re-positioned Error „this accessory may not be supported“ appears This just shows a completed charging process Now the smartphone continous to be supplied with power