Download Philips HTS3156/93 User's Manual
Transcript
3 Enjoy Register your product and get support at www.philips.com/welcome HTS3156 Start disc playback Playback other supported devices A Press OPEN/CLOSE ç to open the disc tray. USB B C D E 1 2 3 Place a disc with the disc label facing up. Press OPEN/CLOSE ç to close the disc tray. USB device Playback starts automatically. A B C D If the disc menu appears on the TV, use keys or the numeric keypad to select an option in the menu and press OK to start playback. z To enjoy the powerful surround sound from the speakers, press SURROUND on the remote control to turn on the multi-channel surround mode. Insert your USB device to the USB socket. Press DISC/USB to switch to ‘USB’ mode. Press u to start playback. To stop playback, press DISC/USB to switch to ‘DISC’ mode. You can unplug your USB device now. - F Press to stop playback. Right side view Connect Set up Enjoy Quick Start Guide Note When you press u button, playback resumes from where it last stopped. To start playback from the beginning, you have to press . What’s in the box? Other portable audio player A Use the supplied MP3 LINE-IN cable to connect the headphone output socket on your portable audio player to MP3 LINE-IN socket. B Press PLAY on your portable audio player. C Press MP3 LINE-IN to listen to the playback. 1 centre, 2 front, 2 rear speakers and subwoofer Need help? User Manual Main Unit FM wire antenna Composite video cable AM/MW loop antenna Remote Control and 2 batteries User Manual See the user manual that came with your Philips DVD Home Theatre System. 2008 C Koninklijke Philips N.V. All rights reserved. www.philips.com sgpjy_0815/93_02 hts3156_93_qsg_eng2_final815.ind1 1 2008-04-15 10:23:46 AM 1 A Connect 2 Placement C Proper speakers system placement is important to ensure optimum sound performance. Connect the various coloured plugs from the speakers and subwoofer to the same coloured sockets at the rear of the main unit. FRON T LEFT REAR LEFT CENT ER FRONT RIGHT FRON T RIGHT WO A Connect the radio antennas Keep the antennas away from the electronic devices to prevent unwanted interference. select the correct viewing channel. STANDBY-ON C B FRONT CENTRE SPEAKERS R REAR RIGHT it on. B Turn on the TV. Use the TVs remote control to FRONT LEFT OFE AM/ MW FM antenna A Note To search for the correct viewing channel, press the Channel Down button on the TVs remote control repeatedly (or AV, SELECT, ° button) until you see the Video In channel. D REAR LEFT A Place the centre speaker above or close to the TV. B Place the subwoofer on the floor, at least one metre A Connect the FM antenna to the inner pin of the FM 75 socket. (For some models, it has been connected in the factory.) Extend the wire for optimum reception. away from the TV. C Place the front speakers at equal distances from the TV. B B Unfold the AM/MW loop antenna (applicable for D Place the rear speakers at normal listening ear level. China version only) and fix the claw into the slot. C Press on the AM/MW tabs and insert the wires into Connect the main unit to TV Select the display language on the screen A Press SETUP. The { General Setup Page } appears. the sockets. B Finding the viewing channel A Press 2 (STANDBY ON) on the main unit to turn AM/MW antenna SUBWOOFER SUB REAR RIGHT D Connect the speakers and subwoofer D Connect the power cable from the main unit to the AC power outlet. VIDEO IN (CVBS) Main Unit (rear) SPEAKERS AM/ MW E General Setup Page Disc Lock Display Dim Program OSD Language Screen Saver Sleep DivX(R) VOD Code Connect audio output from TV (optional) To hear the TV audio through this home theatre system, use a red and white audio cables (not supplied) to connect the AUDIO IN-TV sockets on the main unit to the AUDIO OUT sockets on your TV. VIDEO IN (CVBS) Television (rear) AUDIO OUT SPEAKERS AM/ MW Television (rear) Pr Main Unit (rear) Note It is important to connect the main unit directly to your TV. hts3156_93_qsg_eng2_final815.ind2 2 B Press C Use to select { OSD Language } and press . keys to select a language option in the menu and press OK to confirm. Note The language set here is only for the menus that are shown on the TV while operating this Home Theatre system, not for the DVD disc menu. AUDIO IN SPEAKERS CVBS socket on the main unit to the VIDEO IN socket on your TV. SETUP AUDIO OUT Y z Connect a composite video cable (supplied) from the English D Press SETUP to exit. AUDIO OUT VIDEO OUT Set up AM/ MW There are various setup options (Audio Setup, Video Setup, Preference Setup) available on this Home Theatre System. Refer to the user manual for more information. Main Unit (rear) Note Press TV on the remote control to get the sound output from the speakers system when watching the TV programmes. 2008-04-15 10:23:49 AM