Transcript
DX8100 DVR COMPATIBILITY WITH THE DX8000 Tech Tips Helpful Tips for Pelco Products October 23, 2006 COMPATIBILITY - DX8000 vs. DX8100 QUESTION If you have a DX8000 as the master unit and add a DX8100 to the configuration, will you be able to view/control the system with the DX8000? ANSWER No, the DX8100 needs to be configured as the master unit and the DX8000 needs to be reconfigured as a client. See the following illustration for view/control compatibility when using a DX8000 with a DX8100. DX8000 Remote Client DX8000 YES NO YES YES NO DX8100 Remote Client DX8100 YES World Headquarters 3500 Pelco Way, Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.com Pelco and the Pelco logo are registered trademarks of Pelco. Information subject to change without notice. ©Copyright 2006, Pelco. All rights reserved. Page 1 of 1 DX8100_DX8000_COMPAT.fm