Download Mobi Technologies ROOMMATE 70193 User's Manual
Transcript
Item # 70193 Multi-Color Night Lamp Set-up Insert Pin Plug (A) of AC Adapter (B) into Connection Port (C) on back side of the lamp Base (D) and then insert Adapter Plug (E) into a regular household power outlet. Place the RoomMate™ Lamp (F) onto a clean, dry, level surface such as the top of a desk, table, nightstand, shelf,or dresser. DO NOT PLACE THE LAMP OR THE AC ADAPTER CORD ONTO ANY BEDDING, PILLOWS, OR CHAIRS; IT IS NOT A TOY. AS WITH ALL ELECTRICAL PRODUCTS USE OF THE ROOMMATE™ REQUIRES ADULT SUPERVISION. Switching Sequence Turn it ON Press and release the On/Off Button (G) on the lamp Base (D). It will instantly illuminate, initially set to GREEN. Change Colors When the lamp is green, press the Color Mode Button (H) and it will change to BLUE. Press the Color Mode (H) again and it will change to RED. Press the Color Mode (H) once more and the illumination will change to rainbow cycling MULTI-COLOR. Continuing to press and release the Color Mode (H) will sequence through the single and rainbow color modes in the same order as described above. Turn it OFF When the RoomMate™ is on, in any color mode, you may press and release the On/Off Button (G) again and it will instantly switch to OFF. Fade to OFF with 15-minute timer The RoomMate™ can be set to automatically dim to OFF after 15 minutes, which can help children fall asleep or be used to time reading or other bedtime activities. When the lamp is on, and in any color mode, simply press and hold down the On/Off Button (G) until the Timer-On Indicator (I) lights up red. This way, instead of turning the lamp off at that moment, you will know in 15 minutes the RoomMate™ will gently fade to OFF. Care To clean the outer surfaces simply wipe with a lightly damp cloth. Do not spray or pour dripping liquids onto any part of the lamp or get it wet in any way other than damp cloth cleaning as described. Safety Keep your RoomMate™ Multi-Color Night Lamp away from open flames or extreme heat. As described in the Set-up section, do not use the lamp on any surface, area, or material not intended for supporting a lamp. Use only in areas that are dry and clean. Never plug any electrical product into circuits that would exceed the maximum electrical load for its use. Specification Product Name: TykeLight® RoomMate™ Model: 70193 Dimensions : 6.75 x 7.25 x 4.75 inches Weight: 14 oz Parts Included RoomMate™ Multi-Color Night Lamp –– 1 pc RoomMate™ AC Adapter –– 1 pc Instructions –– 1 pc Limited Warranty Mobi Technologies, Inc. warrants this product to be free from defects in material and workmanship for a period of ninety (90) days from the date of purchase. Should this product prove to be defective at any time during the warranty period, Mobi Technologies, Inc. will, at its option, either replace or repair it without charge. After the warranty period, a service charge will be applied for replacement of parts or labor for repair. To obtain warranty service please return the product to Mobi® along with a dated sales receipt from the place of purchase. This warranty does not cover damage caused by accident, misuse, abuse, improper maintenance, unauthorized modification, or connection to an improper power supply. A charge will be made for repair of such damage. This warranty excludes all incidental or consequential damages and any liability other than what is stated above. Mobi Technologies, Inc. 5913 Blackwelder Street Culver City, CA 90232 www.getmobi.com Mobi, TykeLight, and RoomMate are trademarks of Mobi Technologies, Inc. © 2009 Mobi Technologies, Inc. All Rights Reserved