Transcript
SPEC FILE ET-PKD75S Ceiling Mount Bracket Description This ceiling mount bracket is to be used when mounting DLP™-based projectors to the low ceiling. Specifications Vertical correction angle: Horizontal correction angle: Dimensions (W x H x D): Weight: +5° ±2.5° 478 x 110 x 343 mm (18-13/16˝ x 4-5/16˝ x 13-1/2˝) 5.2 kg (11.5 lbs) Weights and dimensions shown are approximate. Specifications subject to change without notice. Digital Light Processing and DLP are trademarks of Texas Instruments. Parts Attachment plate . . . . . . . . . . . . . . . .1 Angle adjuster . . . . . . . . . . . . . . . . . .1 Projector mount bracket . . . . . . . . . . .1 Safety fitting . . . . . . . . . . . . . . . . . . . .1 Washer-fitted screws (M6 x 12) . . . . .15 Washer-fitted screws (M4 x 8) . . . . . . .4 Caution: Mounting should be done by a qualified technician. Make sure that the mounting (ceiling) area has sufficient strength. Read the enclosed mounting instructions thoroughly before starting. Dimensions Attachment Plate 29 (1-5/32˝) 236 (9-9/32˝) ˝) 32 -1 5/ (3 218 (8-19/32˝) 254 (10˝) 202 (7-15/16˝) Ø 11 (7 /1 6˝ ) The assembled ET-PKD75S with a projector and the ET-D75LE1 optional lens mounted 215 (8-15/32˝) 249 (9-13/16˝) 140 (5-1/2˝) 260 (10-1/4˝) 129 215 (5-3/32˝) (8-15/32˝) Note: This illustration is not drawn to scale. As of August 2004 unit: mm (inch) (Dimensions given in inches are approximate.) 1