Transcript
Installation Instructions & Technical Specifications TH-PPE-24 24” (610mm) Fixed Length Projector Pole Accessory General Features Maximum Weight: 454kg (1000lbs) Pole Compatibility: 1.5” NPT Colour: White Warranty: 10 years Component Checklist HARDWARE Pole Connector Set Screw (x4) Extension Pole Plastic Cover Security Screw (x4) 2.5mm Security Allen Key IMPORTANT INFORMATION: ! IMPORTANT - Install Telehook Projector Pole as per installation instruction. ! This product supports a maximum load of 454kg (1000lbs.). ! The manufacturer accepts no responsibility for incorrect installation. Step 1. Check Components Check you have received all parts against the component checklist and hardware above. Technical Specifications Step 2. Assembly Existing Installation 54mm (2.1”) Thread must be 1.5” NPT OD 48mm (1.9”) ID 41.8mm (1.6”) 1.5”NPT 1.5”NPT 39.1mm (1.5”) 76mm (3”) 47.3mm (1.8”) 2.1. When pole & connector are in place, secure by inserting the 4 Standard OR Security Set Screws using the supplied Allen key. Note: Pole can be installed in reverse orientation. 649.6mm (25.5”) 24” (609.6mm) Extension Pole Removable Plastic Cover 1.5”NPT No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 24.05.13 ©
