Download CnMemory i.onik BTH-033
Transcript
Headset BTH-033 Kurzanleitung Quick Start Guide Chips and More GmbH Gewerbestr. 7 | 79112 Freiburg | Germany | www.i-onik.de Service: + 49 7664 403 69 12 Email:[email protected] 1 Deutsch Inhalt Kurze Einleitung............................................................ 3 1. Drahtlose Kommunikationstechnologie mit Bluetooth......... 3 2. Über BTH-033.............................................................. 3 Vor dem Gebrauch......................................................... 4 1. Übersicht..................................................................... 4 2. Den Kopfhörer aufladen................................................. 5 Inbetriebnahme............................................................ 6 1. Ein/Ausschalten des Kopfhörers............................... 6 2. Verbinden des Kopfhörers mit dem Bluetooth Gerät.. 7 1) Wie Sie den Verbindungsmodus einschalten................. 7 2) Kopfhörer mit Bluetooth-Handy verbinden................... 7 3) Kopfhörer mit dem Bluetooth-Transmitter verbinden..... 8 4) Kopfhörer mit verschiedenen Geräten verbinden........... 9 3. E rneute Verbindung mit dem Bluetooth-Gerät herstellen.............................. 10 4. Anrufe mit dem Kopfhörer tätigen........................... 11 5. Musik abspielen....................................................... 13 6. LED Anzeige............................................................ 14 7. Warnton.................................................................. 15 8. Fabrikeinstellungen wiederherstellen...................... 16 9. In den Ausgangszustand zurückversetzen.............. 16 Pflege und Wartung..................................................... 16 FAQs............................................................................ 17 Spezifikationen............................................................ 18 2 Willkommen zum Bluetooth Stereo Kopfhörer BTH-033. Bitte lesen Sie sich diese Bedienungsanleitung sorgfältig durch, bevor Sie den Kopfhörer in Betrieb nehmen. Kurze Einleitung 1. Drahtlose Kommunikationstechnologie mit Bluetooth Bluetooth ist eine Kommunikationstechnologie für den Nahbereich, die von Sony-Ericsson, IBM, Intel, Nokia und Toshiba entwickelt wurde. Mit der Bluetooth Technologie kann die höchste Übertragungsrate bei Handys, Computern, Druckern, PDAs und anderen Geräten erreicht werden. Die maximale Reichweite für Klasse II ist 10 Meter, während sie für Kasse I bis zu 100 Meter sein kann. 2. Über das BTH-033 BTH-033 ist ein Bluetooth-Stereo-Kopfhörer. Durch das faltbare und einklappbare Design kann er leicht transportiert werden. Er unterstützt folgende Bluetooth Systeme: HSP......... Headset Profile (Kopfhörer Profil) HFP......... Hands-Free Profile (Freisprechprofil) A2DP....... Advanced Audio Distribution Profile AVRCP..... Audio/Video Remote Control Profile Mit dem BTH-033 können Sie drahtlos Musik hören. Er verfügt über folgende Funktionen: 1) V erbindung mit einem Bluetooth-Handy oder PDA über das HFP Profil - einen Anruf annehmen, einen Anruf beenden und einen Anruf abweisen - Wahlwiederholung - Sprachwahl - Gespräche zwischen dem Kopfhörer und dem Bluetooth-Handy verbinden - Mikrofon aus 2) V erbindung mit einem Bluetooth-Musikgerät oder BluetoothTransmitter über das A2DP Profil 3 - Drahtlos Musik hören Lautstärke anpassen Fernbedienung pausieren/abspielen Fernbedienung vor-/zurückspulen 3) E s ist einfach, zwischen Anrufen und Musik hin- und herzuschalten, Sie verpassen keine Anrufe wenn Sie Musik hören. 4) J edesmal, wenn der Kopfhörer eingeschaltet wird, stellt er automatisch eine Verbindung zu dem zuletzt verbundenen Gerät her. Bemerkung: Um die oben erwähnte Funktion zu nutzen, muss das BluetoothProfil des verbundenen Geräts das gleiche wie das des Kopfhörers sein. Auch wenn das verbundene Gerät und der Kopfhörer das gleiche Bluetooth Profil unterstützen, können sich die Funktionen der einzelnen Geräte unterscheiden. Vor dem Gebrauch 1. Übersicht 1 Eingebautes Mikrofon 7 LED Anzeige 2 Multifunktioneller Knopf (MFB) 8 USB-Ladebuchse 3 Nächstes Lied 9 Lautstärke reduzieren 4 Pausieren/abspielen 10 Lautstärke erhöhen 5 Vorheriges Lied 11 Rechter Lautsprecher 6 AUX-Eingang 12 Linker Lautsprecher 2. Den Kopfhörer aufladen Der Kopfhörer wird mit einer aufladbaren Batterie geliefert. Wir empfehlen, diese vor der ersten Inbetriebnahme vollständig aufzuladen. Wenn die Batterie des Kopfhörer fast leer ist, gibt der Kopfhörer alle 30 Sekunden drei „Dong” Töne ab und die rote LED-Anzeige blinkt zweimal. Bitte laden Sie die Batterie des Kopfhörers auf. 4 5 Bitte laden Sie das Gerät mit einem USB Kabel wie folgt: 1. Stecken Sie das USB-Kabel in den USB-Port Ihres Computers 2. V erbinden Sie das andere Ende des USB-Kabels mit dem Kopfhörer Rotes Licht an: Gerät lädt Rotes Licht aus: Gerät ist aufgeladen 3. Der Ladeprozess dauert etwa 2,5 Stunden Bemerkungen: 1) Die Batterie kann recycelt werden. 2) B atterien (in einem Paket oder bereits im Gerät installiert) sollten keiner großen Hitze wie direktem Sonnenlicht, Feuer oder ähnlichem ausgesetzt werden. Inbetriebnahme 1. Ein/Ausschalten des Kopfhörers Funktionen Bedienung LED Anzeige Einschalten Drücken und halten Sie den MFB Knopf für 3-5 Sekunden, bis die blaue LED blinkt. Blaue LED ist eine Sekunde an Ausschalten Drücken und halten Sie den MFB Knopf für 3-5 Sekunden, bis die rote LED blinkt. Rote LED ist eine Sekunde an Bemerkungen: Um Strom zu sparen, schaltet sich der Kopfhörer automatisch aus, wenn er nach 5 Minuten nicht mit einem Gerät verbunden werden kann. 6 2. Verbinden des Kopfhörers mit dem Bluetooth-Gerät 1) Wie Sie den Verbindungsmodus einschalten Funktionen Bedienung LED Anzeige Verbindungsmodus aktivieren Schalten Sie den Kopfhörer aus. Drücken und halten Sie den MFB Knopf für 7-8 Sekunden, bis die blaue und rote LED abwechselnd leuchten. Rote und blaue LED blinken abwechselnd Bemerkung: Der Verbindungsmodus dauert 2 Minuten. Wenn nach 2 Minuten keine Verbindung aufgebaut werden kann, schaltet das Gerät sich automatisch wieder auf Standby. 2) Kopfhörer mit Bluetooth-Handy verbinden Bevor Sie den Kopfhörer zum ersten Mal benutzen, müssen Sie ihn mit einem Bluetooth-fähigen Handy verbinden. Der Verbindungsvorgang ist abhängig vom Modell Ihres Handys. Bitte entnehmen Sie weitere Informationen der Bedienungsanleitung Ihres Handys. Normalerweise verläuft der Verbindungsvorgang folgendermaßen: 1) S orgen Sie dafür, dass Ihr Kopfhörer und das Telefon sich nicht mehr als 1 Meter voneinander entfernt befinden, wenn Sie die Geräte verbinden. 2) S chalten Sie den Verbindungsmodus Ihres Kopfhörers ein (weitere Informationen hierzu finden Sie unter dem Punkt „Wie Sie den Verbindungsmodus einschalten“). 3) A ktivieren Sie die Bluetooth-Funktion Ihres Handys, um nach Bluetooth-Geräten innerhalb der Reichweite zu suchen und wählen Sie dann „i.onik BTH-033“ aus der angezeigten Liste. 7 4) F olgen Sie den Anweisungen und geben Sie ggf. bitte Ihr Passwort oder die PIN Nummer „0000” ein. 5) W enn Ihr Handy fragt, ob Sie eine Verbindung aufbauen möchten, wählen Sie bitte „Ja” (dies kann von Handy zu Handy verschieden sein). 6) W enn die Verbindung erfolgreich aufgebaut wurde, blinkt die LED zwei- oder dreimal alle vier Sekunden. Bemerkungen: - Wenn keine Verbindung aufgebaut werden konnte, schalten Sie erst den Kopfhörer aus und versuchen Sie erneut eine Verbindung aufzubauen, indem Sie die oben aufgeführten Schritte 1-6 ausführen. - Wenn der Kopfhörer und das Handy erfolgreich verbunden sind, erinnern sie sich aneinander und Sie müssen sie beim nächsten Gebrauch nicht erneut verbinden. Der Kopfhörer hat einen Speicher für 8 Geräte. Wenn die Zahl der verbundenen Geräte 8 überschreitet, wird das Erste ersetzt. - Jedes Mal, wenn der Kopfhörer eingeschaltet wird, stellt er automatisch eine Verbindung zum zuletzt verbundenen Gerät her. Wenn Sie den Kopfhörer mit einem anderen Gerät verbinden wollen, schalten Sie bitte die Bluetooth-Funktion des zuletzt verbundenen Geräts aus und verbinden Sie das neue Gerät indem Sie den oben beschriebenen Schritten 1-6 folgen. 3) K opfhörer mit dem Bluetooth-Transmitter verbinden Um über eine drahtlose Verbindung Musik hören zu können, können Sie den Kopfhörer mit einem Bluetoothtransmitter verbinden. Nehmen Sie zum Beispiel den BTT010 (BluetoothTransmitter für iPod und iPhone - nicht enthalten). Die Schritte zum Verbinden sind wie folgt: 1) S orgen Sie dafür, dass der Kopfhörer und das Telefon beim Verbinden nicht mehr als 1 Meter voneinander entfernt sind. 2) S chalten Sie den Verbindungsmodus des Kopfhörers ein (mehr dazu finden Sie unter „Wie Sie den Verbindungsmodus einschalten“). 8 3) S chalten Sie den Bluetooth-Transmitter ein. Er sucht auto-matisch nach Bluetooth Geräten und schickt diesen ein Signal zum Verbinden. 4) W enn der Kopfhörer um die Eingabe einer PIN Nummer bittet, antwortet der Transmitter automatisch „0000”. 5) W enn die Geräte erfolgreich verbunden sind, blinkt die blaue LED zweimal alle vier Sekunden. BTT010 (Abb. ähnlich. Nicht enthalten.) Bemerkungen: - Das Passwort für das Verbinden des Kopfhörers ist „0000”. Dadurch kann der Kopfhörer nur mit einem Bluetooth-Transmitter verbunden werden, dessen Passwort ebenfalls „0000” ist. - Wenn die Geräte nach mehreren Versuchen immer noch nicht verbunden sind, entnehmen Sie weitere Informationen bitte der Bedienungsanleitung des Bluetooth-Transmitters. 4) Kopfhörer mit verschiedenen Geräten verbinden Der Kopfhörer kann mit maximal zwei Geräten gleichzeitig verbunden werden. Das eine ist ein Bluetooth-Handy mit HFP Profil, das andere ein Bluetooth-Gerät zum Abspielen von Musik mit A2DP Profil. Wenn Sie das Multi-pairing abschließen möchten, führen Sie bitte folgende Schritte aus: 1) P airen Sie den Kopfhörer zuerst mit einem BluetoothTransmitter (weitere Informationen finden Sie unter „Kopfhörer mit dem Bluetooth-Transmitter verbinden”). 2) S chalten Sie den Bluetooth-Transmitter aus. 3) P airen und verbinden Sie den Kopfhörer mit einem Bluetooth-Handy (weitere Informationen finden Sie unter „Kopfhörer mit einem Bluetooth Handy verbinden”). 9 4) S chalten Sie den Bluetooth-Transmitter ein, dadurch verbinden Sie ihn automatisch mit dem Kopfhörer. Bemerkungen: - Nach erfolgreichem Multi-pairing erinnern sich die Geräte aneinander, Sie müssen sie beim nächsten Gebrauch nicht erneut pairen. Wenn die Paring-Informationen gelöscht werden, verbinden Sie bitte erst das Telefon mit dem Kopfhörer und schalten dann den Bluetooth-Transmitter ein. So können die einzelnen Geräte miteinander verbunden werden. - Wenn ein Handy sowohl HSP als auch A2DP unterstützt, kann es gleichzeitig eine HSP und eine A2DP-Verbindung mit dem Kopfhörer aufbauen. In diesem Fall kann es sein, dass der Bluetoot-Transmitter keine Verbindung mit dem Kopfhörer aufbaut. 3. E rneute Verbindung mit dem Bluetooth Gerät herstellen 1) Automatische Verbindung Jedes Mal, wenn der Kopfhörer eingeschaltet wird, stellt er automatisch eine Verbindung zu dem zuletzt verbundenen Gerät her. 2) Manuelle Verbindung Wenn der Kopfhörer sich im Standby-Modus befindet und keine Verbindung mit einem Gerät hergestellt wird, drücken Sie bitte einmal kurz den MFB Knopf und es wird eine Verbindung zum zuletzt verbundenen Gerät hergestellt. Bemerkungen: - Bevor Sie eine Verbindung zu einem Bluetooth-Gerät herstellen, schalten Sie bitte die Bluetooth-Funktion des Bluetooth Geräts ein. - Bei manchen Bluetooth-Geräten, wie z.B. manchen Nokia Handys müssen Sie die Einstellungen des Telefons auf automatische Verbindung stellen. Weitere Informationen entnehmen Sie bitte der Bedienungsanweisung des Herstellers. 10 4. Anrufe mit dem Kopfhörer tätigen 1)Bedienung Funktionen Status des Kopfhörers Bedienung Einen Anruf abbrechen Anrufen MFB einmal kurz drücken Einen Anruf annehmen Eingehender Anruf MFB einmal kurz drücken Einen Anruf abweisen Eingehender Anruf Drücken Sie 2 Sekunden lang MFB und warten Sie dann auf einen Ton Einen Anruf beenden Während eines Anrufs MFB einmal kurz drücken Lautstärke erhöhen Während eines Anrufs + Knopf kurz drücken Lautstärke reduzieren Während eines Anrufs - Knopf kurz drücken Das Gespräch auf ein Handy umlegen Während eines Anrufs Drücken Sie MFB für 2 Sekunden Das Gespräch auf den Kopfhörer umlegen Während eines Anrufs Drücken Sie MFB für 2 Sekunden Mikrofon aus Während eines Anrufs Doppelklicken Sie MFB Mikrofin an Während eines Anrufs (Mikrofon stumm geschaltet) Doppelklicken Sie MFB Sprachwahl Standby-Modus (verbundenes Gerät) Drücken Sie den Knopf 2 Sekunden lang 11 Wahlwiederholung Standby-Modus Doppelklicken Sie MFB Warnung: Übertriebene Lautstärke von Kopfhörern kann das Hörvermögen vermindern. Die Liste mit gepairten Geräten löschen Ausgeschaltet Drücken Sie den MFB- und den Pause-Knopf gleichzeitig für 8 Sekunden und lassen Sie diese los wenn die rote und blaue (oder lila) LED gleichzeitig leuchten Bemerkungen: - Nicht alle Handys unterstützen alle oben aufgelisteten Funktionen. Weitere Informationen entnehmen Sie bitte der Bedienungsanleitung Ihres Handys. - Verschiedene Telefone haben unterschiedliche Funktionen und Töne. - Wenn das Volumen auf Maximum oder Minimum geschaltet wird, hören Sie einen Ton. - Wenn Sie den Antwort-Knopf bei einigen Telefonen drücken, wird der Anruf auf das Handy gelegt. Sie können den Anruf auf den Kopfhörer legen, indem Sie den Gesprächsknopf drücken oder auf das Handy umleiten. Weitere Informationen entnehmen Sie bitte der Bedienungsanleitung Ihres Handys. 2) Drei-Wege Anrufe Funktionen Status des Kopfhörers Bedienung Neuen Anruf entgegen nehmen und aktuellen Anruf beenden Es gibt einen zweiten eingehenden Anruf MFB einmal kurz drücken Den eingehenden Anruf beantworten und den aktuellen Anruf halten Es gibt einen zweiten eingehenden Anruf Drücken Sie MFB für 2 Sekunden Zwischen Gesprächen wechseln Gespräch beibehalten Drücken Sie MFB für 2 Sekunden Aktuelles Gespräch beenden und zum beibehaltenen Gespräch wechseln Gespräch beibehalten MFB einmal kurz drücken 12 5. Musik abspielen Wenn der Kopfhörer mit einem Handy oder einem BluetoothTransmitter, der A2DP unterstützt, verbunden ist, können Sie drahtlos Musik über den Kopfhörer hören. Funktion Satus des Kopfhörers Bedienung Lautstärke erhöhen Musik abspielen “+” Knopf kurz drücken Lautstärke reduzieren Musik abspielen “-” Knopf kurz drücken Voriges Lied Musik abspielen Knopf kurz drücken Nächstes Lied Musik abspielen Knopf kurz drücken 13 Pause Musik abspielen || Knopf kurz drücken Abspielen Pausieren || Knopf kurz drücken Line-in Eingang Ausgeschaltet Kann Musik über ein 3,5 mm Audiokabel abspielen Bemerkungen: - Bei manchen Handys wird Musik über den Lautsprecher des Handys abgespielt statt über den Kopfhörer. Sie müssen im Einstellungsmenü „Ton über Bluetooth abspielen” wählen und dann „BTH-033” als Abspielgerät wählen. Die Musik wird dann an den Kopfhörer übertragen. Weitere Informationen entnehmen Sie bitte der Bedienungsanleitung Ihres Handys. - Wenn die Lautsprecher auf Maximum oder Minimum geschaltet wird, hören Sie einen Ton. - Wenn Sie mit der Fernbedienung vor- oder zurückspulen oder pausieren/abspielen möchten, muss Ihr Bluetooth-Handy oder Bluetoothtransmitter über ein AVRCP Profil für die Verbindung verfügen. Weitere Informationen entnehmen Sie bitte der Bedienungsanleitung Ihres Handys oder Bluetooth-Transmitters. - Die Bluetooth-Verbindung zwischen dem Kopfhörer und Handy wird automatisch unterbrochen, wenn Sie ein 3,5 mm Audiokabel einstecken. Die Leitung steht dann zur Verfügung. 6. LED Anzeige 1) Aufladen LED Anzeige Status des Kopfhörers Rote LED an Aufladen Rote LED aus Aufgeladen 14 2) Verbinden mit einem Bluetooth-Gerät LED Anzeige Status des Kopfhörers Rote und blaue LED blinken abwechselnd Verbindungsmodus Blaue LED blinkt alle 2 Sekunden kurz auf Gerät nicht verbunden Blaue LED blinkt zweimal alle 4 Sekunden Bereits mit HFP oder A2DP verbunden Blaue LED blinkt dreimal alle 4 Sekunden HFP und A2DP gleichzeitig verbinden Blaue LED blinkt schnell Anruf/eingehender Anruf Blaue LED blinkt einmal alle 4 Sekunden Während eines Anrufs Rote LED blinkt zweimal alle 30 Sekunden Niedriger Batteriestatus 7. Warntöne Warntöne Satus des Kopfhörers Zwei Warntöne alle 10 Sekunden Gesprächsmodus und Mikrofon aus Drei „Dong“ Warntöne alle 30 Sekunden Niedriger Batteriestatus 15 8. Fabrikeinstellungen wiederherstellen In ausgeschaltetem Zustand drücken Sie gleichzeitig MFB und Pause für 8 Sekunden und warten Sie, bis die rote und blaue LED leuchten. FAQs 1. Was bedeutet es, wenn die rote LED zweimal alle 30 Sekunden blinkt? Die Batterie ist fast leer und muss aufgeladen werden. 9. In den Ausgangszustand zurückversetzen Wenn das Gerät nicht richtige funktioniert, können Sie ein 3,5 mm Kabel einstecken oder den Kopfhörer aufladen, um das Gerät in den Ausgangszustand zurückzuversetzen. 2. Warum ist die rote LED aus, wenn das Gerät aufgeladen wird? a) B itte kontrollieren Sie, ob das Ladegerät richtig mit dem Kopfhörer verbunden ist. b) Wenn Sie den Kopfhörer für längere Zeit nicht benutzt haben, kann die Batterie komplett leer sein. Wenn Sie die Batterie jetzt aufladen, sollte die rote LED nach 30 Minuten leuchten. Pflege und Wartung Lesen Sie sich die folgenden Empfehlungen durch, bevor Sie den BTH-033 in Betrieb nehmen. Wenn Sie diese Empfehlungen beachten, werden Sie viele Jahre Freude an diesem Produkt haben. - Bewahren Sie das Gerät an einem trockenen Ort auf, um Beschädigungen der Elektronik zu vermeiden. - Bewahren Sie das Gerät nicht in direktem Sonnenlicht oder an heißen Orten auf. Hohe Temperaturen verringern die Lebensdauer von elektronischen Geräten, beschädigen die Batterie oder können bestimmte Plastikteile schmelzen lassen. - Setzen Sie das Gerät keiner großen Kälte aus. Dies könnte die Elektronik beschädigen. - Versuchen Sie bitte nicht, das Gerät auseinander zu nehmen. Dies kann bei mangelnder Fachkenntnis zu Beschädigungen führen. - Lassen Sie das Gerät nicht auf den Boden oder andere harte Flächen fallen. Dies kann die Elektronik beschädigen. - Benutzen Sie keine chemischen Produkte oder Reinigungsmittel, um das Produkt zu reinigen. - Bitte kratzen Sie nicht mit scharfen Gegenständen auf der Oberfläche des Geräts. - Wenn das Gerät nicht richtig funktioniert, senden Sie es bitte an das Geschäft, in dem Sie es gekauft haben zurück. Die Angestellten werden Ihnen helfen, das Problem zu lösen. 16 3. Wie groß ist die effektive Reichweite zwischen dem Kopfhörer und dem Handy? Laut dem Bluetooth-Standard ist die maximale Reichweite bei Geräten der Klasse II 10 Meter. Dies hängt von der Umgebung ab. 4. Warum kann mein Telefon den Kopfhörer nicht finden? Das Handy kann den Kopfhörer nicht finden, wenn sich Kopfhörer und Handy nicht im Verbindungsmodus befinden. Sorgen Sie dafür, dass der Kopfhörer sich im Verbindungsmodus und in Reichweite befindet, dann können der Kopfhörer und das Handy verbunden werden. 5. Warum kann ich keine Stimme hören? a) S orgen Sie dafür, dass der Kopfhörer eingeschaltet ist. b) Sorgen Sie dafür, dass die Lautstärke nicht zu niedrig ist, oder der Kopfhörer auf stumm geschaltet ist. c) Sorgen Sie dafür, dass der Kopfhörer richtig mit dem Handy verbunden ist. d) Sorgen Sie dafür, dass die Entfernung zwischen dem Kopfhörer und dem Telefon der Bluetooth Reichweite entspricht. 17 6. W arum ist die Stimme während des Gesprächs nicht deutlich? a) S orgen Sie dafür, dass Ihr Handy guten Empfang hat. b) Sorgen Sie dafür, dass der Kopfhörer sich innerhalb der Reichweite befindet. 7. W arum kann ich beim Abspielen von Musik nicht vor- oder zurückspulen und pausieren? Für diese Funktion muss Ihr Bluetooth-Gerät AVRCP unterstützen (Audio/Video Remote Control Profile). Bemerkungen: 1. Dieses Gerät entspricht dem Abschnitt 15 der FCC Vorschriften. Der Betrieb unterliegt den folgenden zwei Bedingungen: (1) das Gerät darf keine schädlichen Störungen verursachen, und (2) das Gerät muss alle empfangenen Störungen akzeptieren, inklusive solcher, die die Funktion beeinträchtigen. 2. V eränderungen oder Anpassungen, die nicht ausdrücklich von den zuständigen Behörden genehmigt wurden, können die Genehmigung, dieses Gerät zu nutzen, ungültig machen. Spezifikationen Bluetooth Version Bluetooth V2.1+EDR Bluetooth Profile Kopfhörer, Freisprechfunktion, A2DP, AVRCP Reichweite 10 Meter Kopfhörer Betriebsdauer Musik bis zu 15 Stunden Kopfhörer Standby Dauer Ungefähr 384 Stunden Ladegerät DC5.0V 340mA Kopfhörer Ladezeit Ungefähr 3 Stunden Größe 176 x 165 x 32 mm Gewicht Ungefähr 177 g Batterieleistung 430 mAH 18 19 English Welcome to this guide on using this Bluetooth stereo headset, BTH-033. Please read this user’s manual carefully before use. Contents Brief introduction 1. Bluetooth Wireless Communication Technology Bluetooth is a standard of close range wireless communication technology that was drawn up by Sony-Ericsson, IBM, Intel, Nokia and Toshiba. With Bluetooth technology, we can achieve the highest transmission rate among mobile phones, computers, printers, PDAs and other devices. The maximum transmission range of class II is 10 metres while the maximum transmission range of class I can reach up to 100 metres. Brief introduction........................................................ 21 1. Bluetooth Wireless Communication Technology............... 21 2. About BTH-033........................................................... 21 Before use................................................................... 22 1. Overview................................................................... 22 2. Charging for Headsets................................................. 23 Getting started............................................................ 24 1. Turning the Headset on/off .................................... 24 2. Pairing the Headset with Bluetooth Devices............ 25 1) How to Enter Pairing Mode....................................... 25 2) Pairing the Headset with a Bluetooth Mobile Phone..... 25 3) Pairing the Headset with a Bluetooth Transmitter........ 26 4) Pairing the Headset with Multi-Devices...................... 27 3. Reconnecting with a Bluetooth Device..................... 27 4. Making Calls with the Headset................................. 28 5. Playing Music.......................................................... 31 6. LED Indicator.......................................................... 32 7. Indication Tone....................................................... 33 8. Factory Reset.......................................................... 33 9. Resetting................................................................. 33 Care and Maintenance................................................. 33 FAQs............................................................................ 34 Specification................................................................ 35 20 2. About BTH-033 BTH-033 is a Bluetooth stereo headset. The foldable and retractable design makes it very easy to take with you. It supports the following Bluetooth profiles: HSP......... Headset Profile HFP......... Hands-Free Profile A2DP....... Advanced Audio Distribution Profile AVRCP..... Audio/Video Remote Control Profile You can enjoy music wirelessly by using BTH-033. It has the following features: 1) P airing with a Bluetooth mobile phone or PDA supporting HFP profile - Answer a call, end a call and reject a call - Redial last number - Voice dial - Adjust the volume -C all transfer between the headset and your Bluetooth mobile phone - Mute microphone 2) P airing with a Bluetooth music device or Bluetooth transmitter supporting an A2DP profileEnjoy music wirelessly - Enjoy music wirelessly 21 - Adjust the volume - Remote control pause/play - Remote control previous/next track 3) E asy to switch between the call and music, you will not miss the incoming call during listening to music. 4) E very time the headset is turned on, it will connect to last connected device automatically. Note: In order to complete above function, the Bluetooth profiles of paired device must be the same as the headset. And even though the paired device and the headset support the same Bluetooth profiles, functions may vary due to specification differences of the paired devices. Before Use 1. Overview 1 Built-in microphone 7 LED indicator 2 Multi-function button(MFB) 8 Charging jack 3 Next song 9 Volume down 4 Pause/play 10 Volume up 5 Last song 11 Right speaker 6 Line-in jack 12 Left speaker 2. Charging the Headset The headset comes with a built-in rechargeable battery. Prior to using it, it is recommended that you charge the battery fully for the first time. When the headset’s power is low, the red LED indicator flashes twice and the headset emits three “dong” sounds every 30 seconds. You need to recharge the battery of the headset. 22 23 The charging procedure is as follows: Using a USB cable 1. Plug USB charging cable into the USB port of the computer 2. P lug the other end of the USB cable into the headset. Red light on: Charging Red light off: Finish charging 3. It will take about 2.5 hours to complete the charging. Note: 1) The battery is recyclable. 2) B atteries (the battery pack or batteries installed) must not be exposed to excessive heat, such as in the sunshine or near to a fire. Getting started 1. Turning the headset on/off Functions Operation LED indicator Turning on Press and hold MFB button for 3-5 seconds until blue LED indicator flashes. Blue LED indicator on for one second. Turning off Press and hold MFB button for 3 seconds until red LED indicator flashes. Red LED indicator on for one second. Note: In order to save power, the headset will turn off automatically after 5 minutes if no devices are connected. 24 2. Pairing the Headset with Bluetooth Devices 1) How to enter Pairing Mode Functions Operation LED indicator Entering pairing mode Ensure the headset is off, and then press and hold MFB button for 7-8 seconds until red and blue LED flash alternately Red and blue LED flash alternately Note: Pairing mode will last 2 minutes. If no devices can be connected after 2 minutes, it will return to standby mode automatically. 2) P airing the Headset with a Bluetooth Mobile Phone Prior to using the headset for the first time, you have to pair it with a Bluetooth-enabled mobile phone. The pairing procedure will vary with different models of mobile phones. Refer to your mobile phone user’s manual for further information. The general pairing procedure is as follows: 1) K eep your headset and phone within 1 metre when pairing. 2) M ake the headset enter pairing mode (please refer to “How to enter pairing mode˝). 3) A ctivate your cell phone’s Bluetooth function and set your cell phone to search for Bluetooth devices within range, and select “i.onik BTH-033” from the list of devices shown. 4) A ccording to the indication, enter password or PIN number: “0000”. 5) If prompted by your mobile phone to connect, select “Yes” (this will vary depending on the mobile phone being used). 6) A fter successful connecting, the blue LED indicator flashes twice every 4 seconds or flashes 3 times every 4 seconds. 25 Note: - If pairing fails, please turn off the headset first and then repair according to steps 1-6 above. - Once pairing is successful, the headset and the mobile phone will remember each other; there will be no need to repair next time. The headset can remember 8 paired devices. When the number of paired devices exceeds 8, the first one will be replaced. - Every time the headset is turned on, it will connect to the last connected device automatically. If you want to pair it with other devices, turn off the Bluetooth function of the last connected device then pair the headset with the new device, following steps 1-6 above. 3) P airing the Headset with a Bluetooth Transmitter You can connect the headset to a Bluetooth transmitter, to enjoy music wirelessly. Take a BTT010 (Bluetooth transmitter for iPod and iPhone - not included), for example. The pairing steps are as follows: 1) K eep your headset and phone within 1 metre when pairing. 2) S et the headset to enter pairing mode (refer to “How to enter pairing mode”). 3) T urn on the Bluetooth transmitter. It will search for Bluetooth devices automatically and send a pairing request. 4) W hen the headset requests you to enter a PIN number, the transmitter will respond “0000” automatically. 5) A fter successful pairing and connecting, the blue LED indicator on the headset flashes twice every 4 seconds. BTT010 26 (Fig. similar. Not included.) Note: - The pairing password of the headset is “0000”. The headset can, therefore, only pair with a Bluetooth transmitter whose pairing password is “0000”. - If pairing still fails after several tries, refer to the Bluetooth transmitter user’s manual for further information. 4) Multi-pairing The headset can connect with two devices at most. One is a Bluetooth mobile phone supporting a HFP profile; the other one is a Bluetooth music device supporting an A2DP profile. If you want to finish the multi-pairing, proceed as follows: 1) F irstly, pair the headset with a Bluetooth transmitter (refer to “Pairing the headset with a Bluetooth transmitter”). 2) T urn off the Bluetooth transmitter. 3) P air and connect the headset with a Bluetooth mobile phone (refer to “Pairing the headset with a Bluetooth mobile phone”). 4) T urn on the Bluetooth transmitter; it will connect to the headset automatically. Note: - After successful multi-pairing, the paired devices will remember each other. You will not need to pair next time. If the pairing information is deleted, connect the mobile phone with the headset and then turn on the Bluetooth transmitter. Multiconnecting can be performed. - For a mobile phone supporting the HSP and A2DP at the same time, you may set up a HSP and A2DP connection with the headset simultaneously. At this time, the Bluetooth transmitter must not be connected to the headset. 3. Reconnecting with a Bluetooth Device 1) Automatic connecting Every time the headset is turned on, it will connect to the last connected device automatically. 27 2) M anual connecting When the headset is in standby mode and doesn’t connect to a device, short press MFB button once and it will connect to the last connected device. Transfer conversation to mobile phone During a call Long press MFB for 2 seconds Note: - Before connecting to a Bluetooth device, turn on the Bluetooth function of the Bluetooth device. - On some Bluetooth devices - some Nokia mobile phones, for example - you have to allow automatic connecting in the mobile phone’s settings. Refer to your mobile phone’s manual for further information Transfer conversation to headset During a call Long press MFB for 2 seconds Mute microphone During a call Double click MFB Cancel mute During a call (microphone mute) Double click MFB 4. Making a call with the headset 1) Basic operation Voice dial Standby mode (connected device) Long press button for 2 seconds Redial the last number Standby mode (connected device) Double click MFB Remove paired list Turned off Press MFB and pause button for 8 seconds simultaneously, and release it until the red and blue (or purple) LED are on at the same time Functions Operation LED indicator Cancel a call Calling Short press MFB once Answer a call Incoming ringing Short press MFB once Reject a call Incoming ringing Long press MFB for 2 seconds and release it until listen a tone End a call During a call Short press MFB once Volume up During a call Short press + button Volume down During a call Short press — button 28 29 2) Three-Ways Call Operation Functions Operation LED indicator Answer new call and end current call There is a second incoming call Shortly press MFB once Answer new call and retain current call There is a second incoming call Long press MFB for 2 seconds Switch calls Keep conversation Long press MFB for 2 seconds End current call and switch retain call Keep conversation Shortly press MFB once Warning: Excessive pressure from earphones and headphones can cause hearing loss. Note: - Not all the mobile phones support all the functions listed above. Refer to your mobile phone user’s manual. - Function and prompt tones will differ, depending on the mobile phone. - When the volume is adjusted to maximum or minimum, you will hear one prompt tone. - When pressing the answer button on some mobile phones, the call will be transferred to the mobile phone. You can switch the call to the headset by using the conversation switch button or through operating it on the mobile phone. Refer to your mobile phone user’s manual for further information. 30 5. Playing Music When the headset connects to a mobile phone or Bluetooth transmitter which supports A2DP, you can enjoy music wirelessly through the headset. Functions Operation LED indicator Volume up Playing music Shortly press “+” button Volume down Playing music Shortly press “―” button Last song Playing music Shortly press button once Next song Playing music Shortly press button once Pause Playing music Shortly press || button once Play Pausing Shortly press || button once Line in input Turned off It can play music through aq 3.5 mm audio line Notes: - When playing music on some mobile phones, the music will be transmitted to the mobile phone’s speaker instead of the headset. You have to select “Transmit the sound via Bluetooth” in the settings menu and then choose “BTH-033” as the speaker device. The music will be transmitted to the headset. Refer to your mobile phone user’s manual for further information. - When the volume is adjusted to maximum or minimum, you will hear one prompt tone. 31 - If you want to remotely select the last/next song, or pause/ play, it needs your Bluetooth mobile phone or Bluetooth transmitter need to be paired with the headset to support the AVRCP profile. Refer to the user’s manual of your mobile phone or Bluetooth transmitter for further information. - The Bluetooth will disconnect the headset and the mobile phone automatically if you plug in 3.5 mm audio input, and the line in is available at the time. 6. LED Indicator 1) Charging LED indicator Status of headset Red LED on Charging Red LED off Finished charging 2) Pairing with Bluetooth Device LED indicator Status of headset Red and blue LED indicator flashes alternately Pairing mode Blue LED indicator flashes once quickly every 2 seconds Not connected device Blue LED indicator flashes twice quickly every 4 seconds Have already connected HFP or A2DP Blue LED indicator flashes three times quickly every 4 seconds Connect HFP and A2DP simultaneously Blue LED indicator flashes quickly Calling/incoming call Blue LED indicator flashes once quickly every 4 seconds During a call 32 Blue LED indicator flashes once quickly every 4 seconds Low battery 7. Indication Tone Indication tone Status of the headset Continuous two prompt tone every 10 seconds Conversation mode and microphone mute Three ‘dong’ warning sounds every 30 seconds Low battery 8. Factory Reset In the status of turned off, long press MFB and pause buttons for 8 seconds simultaneously and don’t release them until the red and blue LED indicators are on. 9. Resetting If the product works abnormally, you can plug a 3.5 mm Line-in or charge the headset so that it resets the product. Care and Maintenance Read the recommendations below carefully before using the “BTH-033”. By following these you will be able to enjoy this product for many years. - Keep it dry and don’t put it in a dump place, to avoid the product’s internal circuit being affected. - Keep the product away from direct sunlight or hot places. High temperatures will shorten the life of electronic devices, destroy the battery or distort certain plastic parts. - Don’t expose the product to cold areas. It may damage the internal circuit board. - Don’t try to disassemble the product as it may get damaged. - Don’t let it fall down on to the floor or on other hard surfaces. The internal circuit might get damaged. 33 - Don’t use intensive chemical products or detergents to clean the product. - Don’t scratch the surface with sharp things. If the product doesn’t function properly, return it to the store from which you bought it. The staff will help you to solve the problem. FAQs 1. What does it mean when red LED blinks twice every 30 seconds? The battery is low and needs to be recharged. 2. Why is the red LED off when charging? a) M ake sure that the charging device is well connected to the headset. b) If you don’t use the headset for a long time, the battery may dry up. If this happens, you have to charge the battery for 30 minutes, and then the red LED indicator should be ON. 3. H ow far is the effective range between the headset and mobile phone? According to the Bluetooth standard, the maximum available range of a Class II headset is 10 metres. It varies under different environments. 4.Why can’t my mobile phone search and find the headset? The mobile phone will not find the headset if the headset and mobile phone are not under the pairing mode. Make sure that the headset is under the pairing mode and in the effective working range; then the headset can be paired and connected. 34 5. Why can’t I hear the voice? a) Make sure the headset has been switched on. b) Make sure the volume is not too low or muted. c) Make sure that the headset is connected with the mobile phone correctly. d) Make sure that the distance between the headset and the mobile phone is in the available Bluetooth range. 6.Why is the voice not clear during a conversation? a) M ake sure that the mobile phone is in a strong signal area. b) Make sure that the headset is in the available range for this product. 7. Why can’t I control pause, play, last song and next song when playing music? This function needs a Bluetooth device supporting AVRCP (Audio/Video Remote Control Profile). Specifications Bluetooth version Bluetooth V2.1+EDR Bluetooth profiles Headset, Hands free, A2DP, AVRCP Operating distance 10 meters Headset working time Music up to 15 hours Headset standby time Approx 384 hours Charging input DC5.0V 340 mA Headset charging time About 3 hours Dimension 176 x 165 x 32 mm Weight Approx 177 g Battery capacity 430 mAH 35 Notes: 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device must not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesired operation. 2. C hanges or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 36 37 38 39
This document in other languages
- Deutsch: CnMemory i.onik BTH-033