Download Directed Electronics S 580 E User guide

2.7
Emergency Shutdown
In the event of an emergency or malfunction, press the Emergency Machine Off (EMO) button. The EMO
is the large red button located on the front panel of the dispensing system (Figure 2-3). Activating the
EMO vents all pressure in the pneumatic system, de-energizes the servo power supply capacitors, and
cuts power to all components except the computer and monitor.
If the operator or technician is unable to reach the EMO button, the main power circuit
breaker (Figure 2-3), which is located on the back of the system, can be used for
emergency shutdown.
TIP
Front EMO
Front View
Main Power
Circuit Breaker
Rear View
Figure 2-3 EMO/Main Power Circuit Breaker Locations
2.7.1
Emergency Shutdown Situations
WARNING! In an emergency, failure to completely shut down power to the dispensing system
can cause serious injury to the user and/or damage to the dispensing system.
As a minimum, activate the EMO in the following situations:
•
If anyone is in immediate danger of being injured by moving parts, hazardous materials, or
electrical shock.
•
If valuable dispensing system components or the workpieces are in danger of
being damaged. This can include:
- Physical damage to the dispensing valve or workpiece by unexpected dispensing
head movement.
- Electrical damage to the dispensing system.
16
Safety