Download Craftsman 917.28853 Operator`s manual
Transcript
Operator's Manual 22.0 HP,* 46" Mower Electric Start Automatic Transmission Model No. 917.28853 • EspaSol, p. 33 IMPORTANT: Read and follow all Safety Rules and Instructions before operating this equipment. For answers to your questions about this product, Call: 1-800-659-5917 SEARS Craftsman 5 am - 5 pro, Mon- Help Line Sat Gasoline containing up to t0% ethanol (EIO) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (El0) will void the product warranty. Esta mdquina puede utilizar gasolina con an contenido de hasta el 10% de etanol (ElO). El uso de una gasolina que supere el 10% de etanol (EIO) anulard la garantia del producto, Sears Brands Management Corporation, Hoffman Estates, IL 60179 U.S.A. Visit our Craftsman website:we_v.sears,com/craftsman 581902727 _As rated bytheenginemar_ufacture_ Warranty ................................................ 2 Safety Rules .......................................... 3 Product Specifications ........................... 6 Assembly/Pre-Operation ....................... 7 Operation ............................................... 9 Maintenance Schedule ........................ 16 Maintenance ........................................ 16 Service and Adjustments ..................... 21 Storage ................................................ 27 Troubleshooting ................................... 28 Sears Service ........................ Back Cover Craftsman Riding Equipment Warranty CRAFTSMAN FULL WARRANTY FOR TWO YEARS from the date of purchase, all non-expendable parts of this riding equipment are warranted against any defects in material or workmanship. A defective non-expendable part will receive free in-home repair or replacement if repair is impossible. FOR .FIVE YEARS from the date of purchase, the frame and front axle of this ridingequipment are warranted against any defects in material or workmanship. A defective frame or front axle will receive free in-home repair or replacement if repair is impossible. FOR 90 DAYS from the date of purchase, the battery (an expendable part) of this riding equipment is warranted against any defects in material or workmanship (our testing proves that it will not hold a charge). A defective battery will receive free in-home replacement. ADDITIONAL LIFETIME LIMITED WARRANTY on CAST IRON FRONT AXLE (if equipped) FOR AS LONG AS IT IS USED bythe original owner after the fifth year from the date of purchase, the cast iron front axle (if equipped) of this riding equipment is warranted against any defects in material or workmanship. With proof of purchase, a defective cast front axfe will receive free in-home replacement. WARRANTY SERVICE For warranty coverage details to obtain free repair or replacement, call 1-800-659-5917 or visit the web site: www.craftsman.com In all cases above, if part repair or replacement is impossibIe, the riding equipment will be replaced free of charge with the same or an equivalent model. All of the above warranty coverage is void if this riding equipment is ever used while providing commercial services or if rented to another person. This warranty covers ONLY defects in material and workmanship. Warranty coverage does NOT include: • Expendable parts (except battery) that can wear out from normaEuse within the warranty period, including but not limited to blades, spark plugs, air cleaners, belts, and oil filters. • Standard maintenance servicing, oil changes, or tune-ups, • Tire replacement or repair caused by punctures from outside objects, such as nails, thorns, stumps, or glass. .....-Tire o_wheeI=replacementor repair resultingfrom normal wear, accident; or improper operation or ........ maintenance. • Repairs necessary because of operator abuse, including but not limited to damage caused by towing objects beyond the capability of the riding equipment, impacting objects that bend the frame, axle assembly or crankshaft, or over-speeding the engine. • Repairs necessary because of operator negligence, including but not limited to, electrical and mechanical damage caused by improper storage, failure to use the proper grade and amount of engine oil, failure to keep the deck clear of flammable debris, or failure to maintain the riding equipment according to the instructions contained in the operator's manual. • Engine (fuel system) cleaning or repairs caused by fueI determined to be contaminated or oxidized (stale). In general, fuel should be used within 30 days of its purchase date. • Normal deterioration and wear of the exterior finishes, or product label replacement. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears Brands Management Corporation, Hoffman Estates, IL 60179 _IkDANGER: This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. _WARNING: In orderto prevent accidental starting when setting up, transporting, adjusting or making repairs, always disconnect spark plug wire and place wire where it cannot contact spark plug. Never direct discharged materialtoward anyone. Avoid discharging material against a wall or obstruction. Material may ricochet back toward the operator. Stop the blades when crossing gravel surfaces. _WARNING: Do not coast down a hill in • Do not operate machine without the enneutral you may lose control of the tractor. tire grass catcher, discharge chute, or othersafetydevices in place and working. _,WARNING: Tow only the attachments • Slow down before turning. that are recommended by and comply with • Never leave a running machine unatspecifications of the manufacturer of your tended. Always turn off blades, set tractor. Use common sense when towing. parking brake, stop engine, and remove Operate only at the lowest possible speed keys before dismounting. when on a slope. Too heavy of a load,while • Disengage blades when not mowing. on a slope, is dangerous. Tires can lose Shut off engine and wait for all parts to traction with the ground and cause you to come to a complete stop before cleaning lose control of your tractor. the machine, removingthe grass catcher, or unclogging the discharge chute. _.WARNING: Engine exhaust, some of • Operate machine only in daytight or good its constituents, and certain vehicle compoartificial light. nents contain or emit chemicals known to • Do not operate the machine while under the State of California to cause cancer and the influence of alcohol or drugs. birth defects or other reproductive harm, • Watch for traffic when operatingnear or h(_WARNING: Battery posts, terminals and crossing roadways. related accessories contain lead and lead • Useextracarewhen loading or unloading the machine into a trailer or truck. compounds, chemicals known to the State of California to cause cancer and birth defects • Always wear eye protection when operator other reproductive harm. Wash bands ing machine. • Data indicates that operators, age 60 after bandling, years and above, are involved in a large I. GENERAL OPERATION percentage of riding mower-related injuries, These operators should evaluate • Read, understand, and fol]owa]l instructheir ability to operate the riding mower tions on the machine and in the manual safely enoughto protect themselves and before starting. others from serious injury. • _^._..... Do not put._^. hands near . t-ollowthe _ . manufacturer's recommenda_. ....or feet _,;_^ _-....rotating ,_ tton for wheelwelghts or counterwetghts ;...... ........... of file discharge opening a:t aii iimes: .................. Keep machine free of grass, leaves or • Only allow responsible adults, who are other debris build-up which can touch hot familiar with the instructions, to operate exhaust/engine parts and burn. Do not the machine. allow the mower to plow leaves or other • Clear the area of objects such as rocks, debris which can cause build-up to octoys, wire, etc., which could be picked cur. Clean any oil or fuel spillage before up and thrown by the blades. operating or storing the machine. Allow • Be sure the area is clear of bystanders machine to cool before storage. beforeoperating. Stop machine if anyone _dl • • I._ UI UIIU_I _.llI;_ _ II l_;_l III I_, f_3_;_lO _I_I enters the area. Never carry passengers, Do not mowin reverse unless absolutely necessary, Always tookdown and behind before and while backing. • , , , Ih SLOPE OPERATION • Keep children out of the mowing area and in the watchful care of a responsible Slopes are a major factor related to loss of control and tip-over accidents, which can adult other than the operator. • Be alert and turn machine off if a child result in severe injury or death. Operation enters the area. on all slopes requires extra caution. If you • Before and while backing, look behind cannot back upthe slope or ifyoufeel uneasy and down for small children. on it, do not mow it. , Never carrychildren, even withthe blades • Mow up and down slopes, not across. shut off. They may falloff and be seriously • Watch for holes, ruts, bumps, rocks, or injured or interfere with safe machine other hidden objects. Uneven terrain operation. Children who have been given could overturn the machine. Tall grass can hide obstacles. rides in the past may suddenly appear in the mowing area for another ride and be • Choose a low ground speed so that you run over or backed over by the machine. wilt not have to stop or shift while on the • Never allow children to operate the maslope. chine. • Do not mow on wet grass. Tires may lose traction. • Use extra care when approaching blind corners, shrubs, trees, or other objects Always keep the machine in gear when that may block your view of a child. going down slopes. Do not shiftto neutral and coast downhill. IV. TOWING • Avoid starting, stopping, or turning on a • Tow only with a machine that has a hitch slope, lfthetires Iosetraction, disengage designed for towing. Donot attach towed the blades and proceed slowly straight equipment except at the hitch point. down the slope. • Followthemanufacturer'srecommenda• Keep all movement on the slopes slow tion for weight limitsfor towed equipment and gradual. Do not make sudden and towing on slopes. changes in speed or direction, which • Never allow children or others in or on could cause the machine to roll over. towed equipment, • Use extra care while operating macliine • On slopes, the weight ofthe towed equipwith grass catchers or other attachments; ment may cause loss of traction and loss they can affect the stability of the maof control. chine. Do no use on steep slopes. • Travel slowly and allow extra distance to • Do not try to stabilize the machine by stop. putting your foot on the ground. V. SERVICE - Do not mow near drop-offs, ditches, or embankments. The machine could SAFE HANDLING OF GASOLINE suddenly roll over if a wheel is over the To avoid personal injury or property damedge or if the edge caves in. age, use extreme care in handling gasoline. llh CHILDREN Gasoline is extremely flammable and the ,, vapors are explosive. _I_.WARNING: CHILDRENCAN BE INJURED......... • Extinguish all cigarettes; cigars; pipes, ....... BYTHISEQUIPMENT.The American Acadeand other sources of ignition, my of Pediatrics recommends that children Use only approved gasoline container. be a minimum of 12 year of age before op• Never remove gas cap or add fuel with erating a pedestrian controlled lawn mower the engine running, Allow engine to cool and a minimum of 16 years of age before before refueling. operating a riding lawn mower. • Never fuel the machine indoors. • Neverstorethemachineorfuelcontainer Tragic accidents can occur if the operator is not alert to the presence of children. where there is an open flame, spark, or Children are often attracted to the machine pilot light such as on a water heater or and the mowing activity. Never assume other appliances. • Never fill containers inside a vehicle or that children will remain where you last saw them. on a truck or trailer bed with plastic liner. Always place containers on the ground away from your vehicle when filling. 4 • Remove gas-powered equipment from thetruckortrailerandrefuel it onthe ground. Ifthisisnotpossible, thenrefuel such equipmentwith aportable container, rather thanfroma gasoline dispenser nozzle. • Keep thenozzle incontact withtherim ofthefueltankorcontainer opening at alltimesuntil fueling iscomplete. Donot useanozzle lock-open device, • Iffuelisspilled onclothing, change clothingimmediately. ° Never overfillfuel tank. Replace gascap andtighten securely, o Nevertamper with safety devices. Check their proper operation regularly. Keep machine free of grass, leaves, or other debris build-up. Clean oil or fuel spillage and remove any fuel-soaked debris. Allow machine to cool before storing. If you strike a foreign object, stop and inspectthe machine. Repair, if necessary; before restarting. Never make any adjustments or repairs with the engine running. Check grass catcher components and the discharge chute frequently and replace withmanufacturer's recommended parts, when necessary. Mowerblades aresharp. Wrapthe blade or wear gloves, and use extra caution when servicing them. Check brake operation frequently. Adjust and service as required. • Be alert and turn machine off if a child enters the area. Before and while backing, look behind and down for small children. Mow up and down slopes (I5 ° Max), not across. Choose a low ground speed so that you will not have to stop or shift while on the slope, Avoid starting, stopping, or turning on a slope. Ifthetireslosetraction, disengage GENERAL SERVICE • • Never operate machine in a closed area. Keep all nuts and boltstightto be surethe equipment is in safe working condition. • Maintain or replacesafety and instruction labels, as necessary. Be sure the area is clear of bystanders before operating, Stop machine if anyone enters the area. Never carry passengers. Do not mowin reverse unless absolutely necessary, Always look down and behind before and while backing, Never carry children, even with the • • • • • • blades shut off. They may fall off and .......... be seriously injured or-interfere with safe ............... the blades and proceed machine operation, Children who have down the slope. been given rides inthe past may suddenly appear in the mowing area for another ride and be run over or backed over by the machine. Keep children out of the mowing area and inthe watchful care of a responsible adult other than the operator. • • • slowly straight If machine stops while going uphill, disengage blades, shift into reverse and back down slowly. Do not turn on slopes unless necessary, and then, turn slowly and gradually downhill, if possible. Whenloadingor unloadingthis machine, do not exceed the maximum recommended operation angle of 15°. ................. PRODUCT SPECIFICATIONS Gasoline Capacity and type: 2,5 GaI{ons/9,46 L Regular Unteaded Oil "5/pe: (API: SG-SL) SAE 10W30 (above 32°F/0°C SAE 5W30 (below 32°F/0+C Oil Capacity: W] Fi{ter: 51 Oz+/t ,5 L W/out Filter" 35 OzJ1,05 L Spark Plug: Champion RC12YC (Gap: .030"/0.76 mm) Charging System: 15 Amps Battery: Amp/Hr: Min. CCA: Case size: Blade Bolt Torque: 45+55 Ft. LbsJ62-75 @ 3600 RPM 28 230 UIR Nm CONGRATULATIONS onyour purchase of a new tractor, tt has been designed, engineered and manufactured to give you the best possible dependability and performance. Should you experience any problem you cannot easily remedy, please contact aSears or other qualified service center. We have competent, well-trained representatives and the proper tools to service or repair this tractor. Please read and retain this manual. The instructions will enable you to assemble and maintain yourtractor properly. Always observe the "SAFETY RULES". CUSTOMER Inthe state of Californiathe above isrequired by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest Sears service center (See REPAIR PARTS manual). REPAIR PROTECTION AGREEMENTS Congratulations on making a smart purchase. Your new Craftsman® product is designed and manufactured for years of dependable operation. But like all products, itmay require repair from timeto time.That's when having a Repair Protection Agreement can save you money and aggravation. Purchase a Repair Protection Agreement now and protect yourself from unexpected hassle and expense. Here's what's included in the Agreement: • Expertservice byour 12,000 professional repair specialists. • Unlimited service and no chargefor parts and labor on all covered repairs. • Product replacement if your covered product can't be fixed. • Discount of 10% from regular price of service and service-related parts not covered by the agreement; also, 10% off regular price of preventive maintenance check. , Fast help by phone - phone support from a Sears representative on products requiring in-home repair, plus convenient repair scheduling. RESPONSIBILITIES • Read and observe the safety rules. • Follow a regular schedule in maintaining, caring for and using your tractor. ° Follow instructions under "Maintenance" and "Storage" sections of this manual. • Wear proper Personal Protective Equipment (PPE) while operating this machine, including(at a minimum) sturdy footwear, eye protect!on, and hearing protection. Do Once you purchase the Agreement, a simple phone call is all that it takes for you to schedule service. You can call anytime day or night, or schedule a service appointment online. Sears has over 12,000 professional repair •• _lways letsomeone knowyou are outside mowing, million quality parts and accessories. That's the kind of professionalism you can count on _WARNING: This tractor isequipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-covered or grasscovered land unless the engine's exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). if a spark arrester is used, it should be maintained in effective working order by the operator. to help prolong the life of your new purchase for years to come. Purchase your Repair Protection Agreement today! Some limitations and exclusions apply. For prices and additional information cell 1-800-827-6655. SEARS INSTALLATION SERVICE For Sears professional installation of home appliances, garage door openers, water heaters, and other major home items, in the U.S.A. call 1-8004-MY-HOME® Slope Sheet Keys _ KW(_) (1) Quick _i Connect Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. TOOLS REQUIRED FOR ASSEMBLY Label A socket wrench set will make assembly easier. Standard wrench sizes are listed. (1) 1/2" wrench (2) 7/16" wrenches Pliers Tire pressure gauge Utility knife When right or left hand is mentioned in this manual, itmeanswhenyou areintheoperating position (seated behind the steering wheel). TO REMOVE TRACTOR FROM CARTON UNPACK CARTON • Remove all accessible loose parts and parts cartons from carton. • Cut along dotted lines on all four panels of carton. Remove end panels and lay side panels flat. • Check for any additional loose parts or cartons and remove. BEFORE REMOVING .................... FROM SKID TO CHECK TRACTOR BATTERY 1. Lift seat to raised position. NOTE: If this battery is put into service after month and year indicated on label (label is located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in Maintenance section of this manual for charging instructions). • For battery and battery cable installation see "REPLACING BATTERY" in the "Service and Adjustments" section in this manual, ADJUST SEAT 1. Sit in seat. 2. Lift up adjustment lever (A)and slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down. 3. Release lever to lock seat in 3osition. NOTE: You may now roll your tractor off the skid, Followthe appropriate instruction below to remove the tractor from the skid. WARNING: Before starting, read, understand and follow al! instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects. TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls) 1. Raise attachment liftlever to itshighest position. 2. Release parking brake by depressing brake pedal. 3. Place freewheel control in disengaged position to disengage transmission (See "TO TRANSPORT" inthe Operation section of this manual). 4. Roll tractor forward off skid. 5. Remove banding holding the deflector shield up against tractor, Continue with the instructionsthat follow. CHECK TIRE PRESSURE The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance, • Reduce tire pressure to PSI shown on tires. CHECK DECK LEVELNESS For best cutting results, mower housing should be properly leveled. See "TO LEVEL MOWER" in the Service and Adjustments section of this manual. CHECK FOR PROPER POSITION OF ALL BELTS See the figures that are shown for replacing "motion a:ndmoWetbladedrivebeltsirithe Service andAdjustments section ofthis manual. Verify that the belts are routed correctly. CHECK BRAKE SYSTEM After you learn how to operate your tractor, check to seethatthe brake is operating properly, See"TO CHECK BRAKE" inthe Service and Adjustments section of this manual. t_CHECKLIST Before you operate your new tractor, we wish to assure that you receive the best performance and satisfaction from this Quality Product. Please review the following checklist: J" All assembly instructions have been completed. !,/" No remaining loose parts in carton. _/Battery is properly prepared and charged. 1,/" Seat is adjusted comfortably and tightened securely. _/" All tires are properly inflated. (For shipping purposes, thetires were overinflated at the factory). _/f Be sure mower deck is properly leveled side-to-side/front-to-rear for best cutting results. (Tires must be properly inflated for leveling). Vf Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers. _f Check wiring. See that all connections are still secure and wires are properly clamped. _/" Before driving tractor, be sure freewheel control is in "transmission engaged" position (see "TO TRANSPORT" in the Operation section of this manual). While learning howto use your tractor, pay extra attention to the following important items: _f Engine oil is at proper level, J" Fueltank is filled with fresh, clean, regular unleaded gasoline. J Become familiar with all controls, their location and function, Operate them before you start the engine, v f Be sure brake system is in safeoperating condition. _ Be sure Onerator Presence S_,stemand ............. Reverse C_neration System ('F_OS_are ...... _ _ working properly (See _ the Operation and Maintenance sections in this manual). J" It is important to purge the transmission before operating your tractor for the first time. Fol!owproper startingand transmission purging instructions (See'%0 START ENGINE"and "PURGETPdkNSMISSION" inthe Operation section of this manual). These symbols mayappear onyourtractor orinliterature supplied withtheproduct, Learn andunderstand theirmeaning. R N REVERSE ENGINE H NEUTRAL OFF REVERSE OPERATION L HIGH ENGINE LOW ON ENGINE CHOKE START PARKING FAST BRAKE SLOW MOWER IGNITION swITCH MOWERL[FT HEIGHT SYSTEM(ROe) LIGHTS ON FUEL ATrACHMENT CLUTCH DISENGAGED BA'n'ERY REVERSE ATTACHf_ENT CLUTCH ENGAGES FORWARD DANGER, KEEP HANDS AND FEETAWAY CRUISE KEEP CONTROL AREA CLEAR _EESAFETYRULES FREEWHEEL (Automatic Models only) & & & GLUTCHIBRAKE PEDAL SLOPE HAZARDS SECTION) DANGER indicates a hazard which, if not avoided, will result in death or serious injury. WARNING indicates a hazard which, if not avoided, could result in death or serious injury, CAUTION indicates a hazard which, if not avoided, might result in minor or moderate injury. CAUTION when used without the alert symbol, indicates a situation that could result in damage to the tractor and/or engine. Failure to follow instructions could result in serious injury or death. The safety alert symbol is used to identify safety information about hazards which can result in death, serious injury and/or property damage. HOT SURFACES indicates a hazard which, if not avoided, could result in death, serious injury and/or property damage. FIRE indicates a hazard which, if not avoided, could result in death, serious injury and/or property damage, 9 KNOW YO UR TRACTO R READ THIS MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference, Our tractors conform to the applJcable safety standards of the American National Standards Institute. (A) ATTACHMENT LIFT LEVER- Usedto raise and lower the mower or other attachmerits mounted to your tractor, (B) BRAKE PEDAL- Used for braking the tractor and starting the engine. (C) PARKING BRAKE- Locks clutch!brake peda nto the brake position. (D) THROTTLE/CHOKECONTROLUsed for starting and controlling engine speed. (E) ATTACHMENT CLUTCH LEVER- Used to engagethe mower blades, or other attachments mounted to your tractor. (F) IGNITION SWITCH - Used for starting and stopping the engine. (G) REVERSE OPERATION SYSTEM (ROS) "ON" POSITION - Allows operation of mowerorother powered attachmentwhile in reverse. (H) LIGHT SWITCH - Turns the headlights on and off. (J) CRUISE CONTROL LEVER- Usedto set........ forwardmovementoftractoratdesiredspeed without holding the forward drive pedal. (K) FORWARD DRIVE PEDAL- Used for forward movement of tractor. (L) REVERSE DRIVE PEDAL - Used for reverse movement of tractor. (M) FREEWHEELCONTROL- Disengages transmission for pushing or slowly towing the tractor with the engine off. 10 The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eyedamage. Always wear safety glasses or eye shields while operatingyour tractor or performing any adjustments or repairs. We recommend standard safety glasses orawidevision safety maskworn over spectacles. HOW TO USE YOUR TRACTOR TO SET PARKING BRAKE Your tractor is equipped with an operator presence sensing switch. When engine is running, any attempt bythe operator to leave the seat without first setting the parking brake will shut off the engine, 1. Depress brake pedal (B) allthe way down and hold. 2. Pull parking brake lever (C) up and hold, release pressure from brake pedal (B), then release parking brake lever. Pedal should remain in brake position. Ensure parking brake will hold tractor secure. • Turn ignition key (F) to "STOP" position and remove key. Always remove key when leavingtractor to prevent unauthorized use. • Never use choke to stop engine. IMPORTANT: Leaving the ignitionswitch in any position other than "STOP" wilt cause the battery to discharge and go dead. NOTE: Under certain conditions when tractor is standing idle with the engine running, hot engine exhaust gases may cause "browning" of grass, To eliminate this possibility, always stop engine when stopping tractor on grass areas. _1,CAUTION: Always stop tractor completely, as described above, before leaving the operator's position. TO USE THROTTLE CONTROL Always operate engine at full speed (fast). • Operating engine at less than full speed (fast) reduces engine's operating efficiency, • Full speed (fast) offers the best mower performance, STOPPING MOWER BLADES • To stop mower blades, move attachment clutch controlto disengaged position (r_l). (_1_) Attachment (t_) Attachment TO MOVE FORWARD AND BACKWARD .......... ,,Olutct_ £ontr£!..................... OlutphOpntr?,!............ ]'he direction and speed of movement .............. Lngagea' LJisengagea is controlled by the forward and reverse drive pedals. GROUND DRIVEI, Start tractor and release parking brake. - Tostop ground drive, depress brake pedal 2. Slowly depress forward (K) or reverse (L) all the way down. drive pedal to begin movement, Ground IMPORTANT: Forward and reverse drive speed increases the further down the pedals return to neutral position when not pedal is depressed, depressed. ENGINE , Move throttle control (D) between half and full speed (.fast)position. NOTE: Failure to move throttle control between half and full speed (fast) position, before stopping, may cause engineto"backfire". 1I TO USE CRUISE CONTROL The cruise control feature can be used for forward travel only. SYSTEM CHARACTERISTICS The cruise controi should only be used while mowing or transporting on relatively smooth, straight surfaces. Other conditions such as trimming at slow speeds may cause the cruise control to disengage. Do not use the cruise control on slopes, rough terrian or while trimmimg or turning. • With forward drive pedal (K) depressed to desired speed, pull cruise control lever (J) up and hold while lifting your foot off the pedal, then release the lever, To disengage the cruise control, depress the brake pedal or tap on forward drive pedal. TO ADJUST MOWER CUTTING HEIGHT The position of the attachment lift lever (A) determines the cutting height. NOTE: Adjust gauge wheels with tractor on a flat level surface. 1. Adjust mower to desired cutting height (See "TO ADJUST MOWER CUTTING HEIGHT" in this section of manual), 2. With mower in desired height ofcut position, gaugewheels should be assembled so they are slightly off the ground, install gauge wheel inappropriate hole.Tighten securely, © 3/4 3. Repeat for all, installinggauge wheel in same adjustment hole. TO OPERATE MOWER Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positionedin the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills, 1. Select desired height of cut with attachment lift lever. • Put attachment lift lever in desired cutting height slot, The cutting height range is approximately 1" to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed. • The average town should be cut to ap- 2. Start mower blades by engaging attachment clutch control. TO STOP MOWER BLADES Disengage attachment clutch control, _IbCAUTION: DO not operate the mower proximately 2-I/2" during the cool season and to over 3" durine hot months without either the entire grass catct)er,.an .... .......... For le0king tawnsl......... mowerS S0eqUipped_orthe defiector shield mow often and after moderate growth. (S) in )lace. For best cutting performance, grass over 6" in heightshould be mowedtwice. Make the first cut relatively high; the second to desired height. TO ADJUST GAUGE WHEELS Gauge wheels are properly adjusted when they are slightly offthe ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions. 12 REVERSE OPERATION SYSTEM (ROS) Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operatorto travel in the reversedirection with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position. ,_WARNING: Backing up with the attachment clutch engaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless absolutely necessary. USING THE REVERSE OPERATION SYSTEM Only use if you are certain no children or other bystanders will enter the mowing area. 1, Depress brake pedal all the way down. 2. With engine running, turn ignition key counterclockwise to ROS "ON" position, 3. Look down and behind before and while backing. 4. Slowly depress reverse drive pedal to start movement. 5, When useofthe ROS is nolonger needed, turn the ignition key clockwise to engine "ON" position, ROS"ON" Position Engine"ON" Position (NormalOperating) TO OPERATE AI_WARNING: ON HILLS Do not drive up or down hills with slopes greater than I5 ° and do not TO TRANSPORT When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheeling position. Freewheel control is located at the rear drawbar of tractor. 1. Raise attachment lift lever to its highest position. 2. Pullfreewheel control out and into the slot and release so it is held inthe disengaged position, * Do not push or tow tractor at more than two (2) MPH. o Tore-engagetransmission, reverse above procedure. Transmission Engaged Transmission Disengaged NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.). TOWING CARTS AND OTHER ATTACHMENTS Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your tractor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous, Tires can lose traction with the ground and cause you to lose control of your tractor. provided at the back of this manual. • Choose the slowest speed before starting up or down hills. . Avoid stopping orchanging speed on hills. • If stopping is absolutely necessary, push brake pedal quickly to brake position and engage parking brake. • To restart movement, slowly release parking brake and brake pedal. ° Slowly depress appropriate drive pedal to slowest setting. • Make all turns slowly, 13 BEFORE STARTING THE ENGINE CHECK ENGINE OIL LEVEL The engine inyourtractor has been shipped, from the factory, already filled with summer weight oil, 1. Check engine oil with tractor on level ground. 2. Remove oiIfi]lcap/dipstick andwipe clean, reinsert the dipstick and screw cap tight, wait for a few seconds, remove and read oillevel, If necessary, add oil until "FULl" markon dipstickis reached. Donotoverfil]. , For cold weather operation you should change oil for easier starting (See the oil viscosity chart in the Maintenance section of this manual). • Tochangeengine oil, see the Maintenance section in this manual. ADD GASOLINE • Fill fueltank to bottom offiller neck. Do not overfill, Usefresh, clean, regular unleaded gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchasefuel inquantities thatcan be used within 30 days to assure fuel freshness. _CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame. IMPORTANT: When operating in temperatures below 32°F(0°C), use fresh, clean winter grade gasoline to help insure good cold weather starting. CAUTION: Alcohol blended fuels (called gasohoi or using ethanol or methanol) can attract moisture which leads to separation and formation ofacids during storage. Acidic gas can damagethe fuel system of an engine while in storage. To avoid engine problems, the ............ fuel system should be emptied before " ............. storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information, Never use engine or carburetor cleaner products inthe fuel tank or permanent damage may occur. TO START ENGINE When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine. 1. Be sure freewheel control is in the transmission engaged position. 14 2. Sit on seat inoperating position, depress brake pedal and set parking brake. 3. Move attachment clutch to disengaged position. 4. Move throttle control to choke position. NOTE: Before starting, read the warm and cold starting procedures below. 5. Insert key into ignition and turn key clockwise to start position and release key as soon as engine starts. Do not run starter continuously for more than fifteen seconds per minute. If the engine does not start after several attempts, move throttle control to fast position, wait a few minutes and try again. If engine still does not start, move the throttle control back to the choke position and retry, WARM WEATHER STARTING (50°F/10 ° C and above) 6. When engine starts, move the throttle control to the fast position. - The attachments and ground drive can now be used. Ifthe engine does not accept the load, restart the engine and allow it to warm up for one minute using the choke as described above. COLD WEATHER STARTING (50°F/10 ° C and below) 6. When engine starts, leave throttle controI in choke position until engine warms up and begins to run roughly. Once rough running begins, immediately move the throttle controlto the fast position. Engine warm-up maytake from several seconds to several minutes (the colder the temperature, the longer the warm-up). AUTOMATIC TRANSMISSION WARM UP Before driving the unit in cold weather, the transmission should be warmed up as follows: 1. Be sure the tractor is on level ground, 2;--Release-the parking brake- and let-the ......... brake slowly returnto operating position. 3. Allow one minute for transmission to warm up. This can be done during the engine warm up period. • The attachments can also be used during the engine warm-up period after the transmission has been warmed up. NOTE: If at a high altitude (above 3000 feet) or in cold temperatures (below 32°F/0°C) the carburetor fuel mixture may need to be adjusted for best engine performance (see "TO ADJUST CARBURETOR" inthe Service and Adjustments section of this manual), PURGE TRANSMISSION _IbCAUTION: Never engage or disengage freewheel lever while the engine is running, Toensure properoperation and performance, it is recommended that the transmission be purged before operating tractor for the first time. This procedurewill remove any trapped air inside the transmission which may have developed during shipping of your tractor. IMPORTANT: Should your transmission require removal for service or replacement, it should be purged after reinstallation before operating the tractor. 1, Place tractor safely on a level surface that is clear of objects and open - with engine off and parking brake set. 2. Disengage transmission by placing freewheel control indisengaged position (See "TO TRANSPORT" in this section of manual). 3, Sitting in the tractor seat, start engine. After the engine is running,move throttle control to slow position, Disengage parking brake. _IbCAUTION: At any time, during step 4, there may be movement of the ddve wheels. 4, Depress forward ddve pedalto fullforward . position and hold forfive (5)seconds and release pedal, Depress reverse drive pedal to full reverse position and hold for five (5) seconds and release pedal. Repeat this procedure three (3) times. 5. Shutoff engine and set parking brake. 6, Engage transmission by placing freewheel control in engaged position (See "TO TRANSPORT" in this section of manual). 7. Sitting in the tractor seat, start engine, After the engine is running, move throttle ................... ,.,_,,_= ÷,_-h=[{t_/m. _,_4. r_ ................ parking brake. " 8, Drive tractor forward for approximately five feet then backwards for five feet, Repeatthisdriving procedurethreetimes. Your transmission is now purged and now ready for normal operation. 15 MOWING TIPS • Tire chains cannot be used when the mower housing is attached to tractor. • Mower should be properly leveled for best mowing performance. See "TO LEVEL MOWER HOUSING" in the Service and Adjustments section of this manual. • The left hand side of mower should be used for trimming, • Drivesothatclippings are discharged onto the area that has already been cut. Have the cut area to the right of the tractor. This will result in a more even distribution of clippings and more uniform cutting, • When mowing large areas, start by turning to the right so that clippings will discharge away from shrubs, fences, driveways, etc, After one or two rounds, mow in the oppositedirection making left hand turns until finished, • If grass is extremely tall, it should be mowed twice to reduce load and possible fire hazard from dried clippings, Make first cut relatively high; the second to the desired height, • Do not mow grass when it is wet. Wet grass will plug mower and leave undesirable clumps. Allow grass to dry before mowing. ,.Always operate engine at full throttle wi_en mowirigt0assi_re betterm0w: ..... ing performance and proper discharge of material. Regulate ground speed by selecting a low enough speed to give the mower cutting performance as well as the quality of cut desired. • When operating attachments, select a ground speed that will suitthe terrain and give best performance of the attachment being used. MA INTENANCE SCHEDULE ..... aE_R_ L'VERYEVERY EVERY ........ _ACH _ 25 Go _os s_soN S_OR,OE EVERY USE Brake Check Operator A L,Ch eckfor Lubrication _ .Chack V Presence & ROS Loose,,Fasteners CheeldReplace T V' Pr@ssure Systems '" V _ HOURS " V Chart Transaxle Mower,Levelness Check V-SeIts _ if .... V_, _,V t,w#s Coo_ing _, '...... , ,, V r E,,n9 ne O Change Engine Level ### (with 0{I (without V' oil filter) _1 filter) V'_,_ Cle_,n Air" Fi!ter "V_" G c_aan A_r screen V'_ ..... ....... _] ,,!,_,spectMuffler/Spark Arrester Replace Replace if (if equipped) Air Filler Pap6r ' ........ Cartridge ........ I1_,2 E_ineCooliqgFi_ Spark Plug If V'12 E Oi[ Filter ii _L Oil Change ,,,illH , Encline .... if i Replace V" 1_3 Battery Leve'l CheCk clean ' I_ Mower Blades Check Replace " , ,V r clean Debris Off Steering plate E BEFORE V' Clean Battery and Terminals Check EVERY HOURS _ C Operation Tire HOURS i Cheek .Check HOURS 11/:, if _2 V ,, Fuel Fil_er GENERAL RECOMMENDATIONS LUBRICATIONCHART The warrantyon thistractor does not cover items that have been subjected to operator abuse or negligence. To receive full value _Steering Pivot Bolts from the warranty,operator must maintain _ ^ . /\ tractor as instructed in this manual _ _p_ndie__l-_ Spindle Some adjustments will need to be made z_erk _L-J.-:::_::_ Zerk periodically to properly maintain your tractor, (_)Front ...--_" :." _'__-.... .... At least once a season, check to see if Wheel _ _-.\ L ,4_l-i'oni you should make any of the adiustments Bearing _Z:._:.'_."_\ k Wheet described in the Service and Adlustments Zerk _/_4 t "_."'--. _ea_nng section of this manual, " _ = . _!_ _ "\. _ z.erK " At least once a year you should replace £# s%_:ngrl I_ _ _.x_\ ......... the spark plug; clean or replace air filter, ................... Ge_ _'_l: I I "_ Engine............. and check blades and belts for wear, A Teetl_ t _-_LL:_"/ JJ new spark ptugand clean air filter assure _ proper air-fuel mixture and help your engine run better and last longer. _General Purpose Grease BEFORE EACH USE @Refer to Maintenance "ENGINE" Section 1. Check engine oil level. 2, Check brake operation, IMPORTANT: Do not oil or grease the pivot 3, Check tire pressure. points which have special nylon bearings. 4, Check operator presence and Viscous lubricants will attract dust and dirt ROS systems for proper operation. that will shorten the life of the self-lubricating 5, Check for loose fasteners. bearings. If you feel they must be lubricated, use only a dry, powdered graphite type lubricant sparingly. 16 TRACTOR CHECK REVERSE OPERATION (ROS) SYSTEM Always observe safety rules when performing * Whenthe engine is running with the ignition anymaintenance. switch in the engine "ON" position and the BRAKE OPERATION attachment clutch engaged, any attempt Iftractor requires more thanfive(5)feetto by the operator to drive in reverse should stopathighest speed inhighest gearona shut offthe engine. level, dryconcrete orpaved surface, then ° When the engine is running with the ignition brake must beserviced. (See "TO CHECK switch in the ROS ON" position and the BRAKE" in the Service and Adjustments section of this manual). TIRES • Maintain proper air pressure in all tires (See PSI on tires), • Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber. • Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage. NOTE: To seat tire punctures and prevent fiat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion. attachment clutch engaged, any attempt by the operator to drive in reverse should NOT shut off the engine, BLADE CARE For best results mower blades must besharp. Replace worn, bent or damaged blades, A CAUTION: Use only a replacement blade approved bythe manufacturer of your tractor. Using a blade not approved by the manufacturer of your tractor is hazardous, could damage you r tractor and void your warranty. BLADE REMOVAL 1. Raise mower to highest position to allow access to blades. NOTE: Protect your hands with gloves and/ or wrap blade with heavy cloth. 2. Remove blade bolt by turning counterclockwise. 3. install new bladewith stamped "GRASS SIDE" facing the ground. IMPORTANT: To ensure proper assembly, center hole in blade must align with star on mandrel assembly, 4, install and tighten blade bolt securely (45-55 Ft. Lbs. torque/62-75 Nm.). OPERATOR PRESENCE SYSTEM AND REVERSE OPERATION SYSTEM (ROS) Be sure operator presence and reverse operation systems are working properly. If your tractor does not function as described, repair the problem.immediately. . The engine should not start unless the brake pedal is fully depressed, and the attachment clutch control is in the disengaged position. CHECK OPERATOR PRESENCE SYSTEM - When the enaine is runnina, any attemot by the opera{or to leave the se_.t witholJt first setting the parking brake should shut IMPORTANT: treated. Special blade Blade f.. ../ _X\'_ bolt is heat off the engine. • When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should (-']- _ l_'x_"_U')) Mandrel B' -e Bolt--"-_ _k_4)'}4 _" -" ,_a_cial, _,,..._'_'.'_.._ AssemD,y _ ," , -'--_&_"_L_.'_'--_ _\-Star ..... shut 0ffthe engine; ............................................................................ _Centel Ho'le_--_-'_. ................................. • The attachmentclutch should never operCenter Hole k..._I ate unless the operator is in the seat. BATTERY Your tractor has a battery charging system ROS "ON" Position which is sufficient for normal use. However, Engine "ON" Position (Normal Operating) periodic charging of the battery with an au- tomotive charger will extend its life. ° Keep battery and terminals clean. • Keep battery bolts tight. • Keep small vent holes open. • Recharge at 6-10 amperes for 1 hour. NOTE: The original equipment battery on your tractor is maintenance free. Do not attempt to open or remove caps or covers, Adding or checking level of electrolyte is not necessary. 17 TOCLEAN BATTERY ANDTERMINALSTO CHANGE ENGINE OIL Corrosion anddirtonthe batteryandterminals Determine temperature range expected cancause thebattery to"leak" power. before oil change, All oil must meet APt 1. Disconnect BLACK battery cablefirst service classification SG-SL thenREDbattery cableandremove• Be sure tractor is on level surface, battery fromtractor. will drain more freely when warm. 2. Rinse thebattery withplainwaterand •° Oil Catch oil in a suitable container. dry. oil fill cap/dipstick, Be careful 3. Clean terminals andbattery cableends 1. Remove not to allow dirt to enter the engine when withwirebrush untilbright. oil. 4. Coatterminals withgrease orpetroleum2. changing Removeyellow capfrom endofdrainvalve jelly, 5. Reinstall battery(See"REPLACING and install the drain tube onto the fitting. BATTERY" intheSERVICE ANDADOilDrain Valve JUSTMENTS section ofthismanual). TRANSAXLE COOLING Thetransmission fan and cooling fins should be kept clean to assure proper cooling. Do not attempt to clean fan or transmission while engine is running or while the transmission is hot. To prevent possible damage to seals, do not use high pressure water or steam to clean transaxle. • Inspect cooling fan to be sure fan blades are intact and clean. • Inspectcoolingfinsfordirt, grassclippings and other materials. To prevent damage to seals, do not use compressed air or high pressure sprayer to clean cooling fins, TRANSAXLE PUMP FLUID The transaxte was sealed at the factory and fluid maintenance is not required for the life of the transaxle. Should the transaxle ever leak or require servicing, contact your nearest Sears or other qualified service center. Locked Position-" Drain Tube andClosed ____-_,__L_._ Yellow Cap- 3. Unlock drain valve by pushing inward slightly and turning counterclockwise. 4, To open, pull out on the drain valve. 5, After oil has drained completely, closeand lock the drain valve by pushing inward and turning clockwise until the pin is in the locked position as shown, 6. Remove the drain tube and replace the cap onto the end of the drain valve. 7. Refill enginewith oil through oil fill dipstick tube. Pour slowly. Do not overfilL For approximate capacity see "PRODUCT SPECIFICATIONS"section ofthis manual. 8. Use gauge on oil fill cap/dipstick for checking level. For accurate reading, insert dipstick into the tube and push down firmly into place before removing. Keep oil up to, but not over, the "FULE' V-BELTS CheckV-belts for deterioration and wear after 100 hours of operation and replace ff necessary. The belts are not adjustable. Replace belts if they begin to slip from wear. ENGINE LUBRICATION Only use high quality detergent oil rated with ineon dipstick. Push dipstick down firmly ....APi se-_ice :€ass f ca{ on SG:SI__ Seiect{he .................. rote the tube when finished ..................................... oil's SAE viscosity grade according to your expected operating temperature. SAE VISCOSITY ENGINE OIL FILTER Replace the engine oil filter every season or every other oil change if the tractor is used more than t00 hours in one year, GRADES Change the oi]after every 50 hours of operation or at least once a year if the tractor is not used for 50 hours in one year. Check the crankcase eli level before starting the engine and after each eight (8) hours of operation, CLEAN AIR SCREEN Air screen must be kept free of dirt and chaff to prevent engine damage from overheating. CIean with a wire brush or compressed airto remove dirt and stubborn dried gum fibers. 18 AIR FILTER Your engine will not run properly using a dirty air filter, Service paper cartridge every two months or every 25 hours of operation, whichever occurs first. Service paper cartridge more often under dusty conditions. Replace the paper cartridge annually, or after every 100 hours of operation. TO SERVICE CARTRIDGE * Replace a dirty, bent, or damaged cartridge. Handle new cartridge carefully; do not use if the rubber seal is damaged. NOTE: Do not wash the paper cartridge or use pressurized air, as this will damage the cartridge. __ Knob SPARK PLUG(S) Replace spark plug(s) at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in "PRODUCT SPECIFICATIONS" section of this manual. IN-LINE FUEL FILTER The fuel filter should be replaced once each season. If fuel filter becomes clogged, obstructing fuel flow to carburetor, replacement is required. 1. With engine cool, remove filter and plug fuel line sections. 2, Place newfuel filter in position in fuel line with arrow pointing towards carburetor, 3. Be sure there are no fuel line leaks and clamps are properly positioned. 4. Immediately wipe up anyspilled gasoline. amp Cartridge CLEANING Clean engine, battery, seat, finish, etc. of all foreign matter. 1. Loosen knobs and remove cover. • Clean debris from steering plate. Debris can restrict clutch/brake pedal 2. Remove cartridge. shaft movement, causing belt slip and 3, Gently tap pleated side of cartridge to loss of drive. dislodge dirt. 4, Clean all air cleaner components of any & CAUTION: Avoid all pinch points and accumulated dirt or foreign material. movable parts Prevent any dirt from entering the throat Clutch/brakepedal of carburetor. ¢z::_z_/ J 5. Install cleaned or new cartridge with the qi Clean /' pleatedslde"out"andseattherubberseal I)' topside _d/ ,_ onto the edges of the a r c eaner base !i _k..!_ _/ • iJ 6. Reinstall air cleaner cover and secure i/ //_by tightening knobs. __. > CLEAN AIR INTAKE/COOLING AREAS Steer To insure proper cooling, ensure the grass Plate-----_,jF,)_ screen, cooling fins, and other external sur/_j[ _/>/'__-_;_=, _// .............. faces of the engine are kept c!ean at a,I!times ............. ___I_ CAUTION: 1 .... i_ Pinchl Every 100 hours of operation (more often SteeringSystem,Dash, under extremely dusty, dirty conditions), Fenderand Mower_4.otShown IAI_ PointsJ removethe blower housing and other cooling shrouds. Cleanthe cooling fins and external " Keep finished surfaces and wheels free of all gasoline, oil, etc, surfaces as necessary, Ensure the cooling • Protect painted surfaces with automoshrouds are reinstalled. tive type wax. NOTE: Operating the engine with abtocked We do not recommend using a garden hose grass screen, dirty or plugged cooling fins, and/or cooling shrouds removed will cause or pressure washer to clean your tractor unless the engine and transmission are engine damage due to overheating. covered to keep water out. Water in engine MUFFLER or transmission wil! shorten the useful life of Inspect and replace corroded muffler and your tractor. Use compressed air or a leaf blower to remove grass, leaves and trash spark arrestor (ifequipped) as it could create from tractor and mower. a fire hazard and/or damage. Y 19 10. DECK WASHOUT PORT Your tractor's deck is equipped with a washout port on its surface as part of its deck wash system. It should be utilized after each use. 1. Drive the tractor to a level, clear spot on your lawn, near enough to a water spigot for your garden hose to reach. IMPORTANT: Make certain the tractor's discharge chute is directed AWAY from your house, garage, parked cars, etc. Remove bagger chute or mulch cover if attached. 2. Ensure the attachment clutch control is in the "DISENGAGED" position, set the parking brake, and stop the engine. 3. Thread the nozzle adapter (packaged with your tractor's Operator's Manual) onto the end of your garden hose, 4, Pul! back the lock collar of the nozzle adapter and push the adapter onto the deck washout port at the left end of the mower deck. Release the lock collar to lock the adapter on the nozzle. Move the tractor to a dry area, preferably a concrete or paved area. Place the attachment clutch control in the "ENGAGED" position to remove excess water and to help dry before putting the tractor away. _WAR N|NG: A broken or missing washout fitting could expose you or others to thrown objects from contact with the blade. • Replace broken or missing washoutfitting immediately, prior to using mower again. • Plug any holes in mower with bolts and Iocknuts. Nozzle Washout Port IMPORTANT: Tug hose ensuring connection is secure. 5. Turn the water on. 6. While sitting in the operator's position on the tractor, re-start the engine and place the throttle lever in the Fast ",_" position. IMPORTANT: Recheck the area making_ certain the area is clear. 7. Move the tractor's attachment clutch control to the "ENGAGED" position. Remain in the operator's position with the cuttingdeck engaged untilthe deck is cleaned. 8. Move the tractor's attachment clutch control to the "DISENGAGED" position, Turn the ignition key to the STOP position to turn the tractor's engine off. Turn the water off, 9. Pull back the lock collar of the nozzle adapter to disconnect the adapter from the nozzle washout port. 2O WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: f. Depress brake pedal fully and set parking brake, 2. Place attachment clutch in "DISENGAGED" position. 3, Turn ignition key to "STOP" and remove key. 4. Ensure the blades and all moving parts have completely stopped, 5, Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug, TO REMOVE MOWER 1. Place attachment clutch in "DISENGAGED" position. 2. Lower attachment lift lever to its lowest position. 3. Roll belt off engine pulley (M) and belt keepers (G). 4, Remove retainer spring (K), slide collar (L) off and push housing guide (P) out of bracket. 5. Remove clutch cable spring (Q) from idler arm (R). 6, Disconnect front link (E) from mower remove retainer spring and washer. 7. Go to either side of mower and disconnect mower suspension arm (A) from chassis pin (B) and rear lift link (C) from rear mower bracket (D) - remove retainer springs and washers, CAUTION: After rear lift ]inks are disconnected, the attachment liftleverwill be spring loaded, Have a tight grip on lift lever when changing position of the lever. 8, Slide mower outfrom under right side of tractor. IMPORTANT: If an attachment other than the mower is to be mounted on the tractor, remove the front link (E) and rear lift links (C) from tractor and hook the clutch spring (Q) into the cable guide on front edge of lower dash. TO INSTALL MOWER Be suretractoris on levelsurface and engage parking brake. 1. Lower attachment lift lever to its lowest position. CAUTION: Lift lever is spring loaded. Have a tight grip on lift lever, lower it slowly and engage in lowest position, NOTE: Be sure mower side suspension arms (A) are pointing forward before sliding mower under tractor, 2. Slide mower under tractor until it is centered under tractor, 03042tex 21 3, ATTACH MOWER SIDE SUSPENSION ARMS (A) TO CHASSIS - Position hole in arm over pin (B) on outside of tractor chassis and secure with retainer spring. 4. Repeat on opposite side of tractor, 7. insert end of link (E) into hole in front mower bracket (H) and secure with washer and retainer spring (J). 8. 5_ ATTACH REAR LiFT LINKS (C) - Lift rear corner of mower and position slot in link assembly over pin (D) on rear mower bracket and secure with washer and retainer spring. Hook end of clutch cable spring (Q) hole in idler arm (R). 9. Push clutch cable housing guide (P) bracket, slide collar (L) onto guide secure with retainer spring (K). t 0. Install belt onto engine pulley (M) and keepers (G), into into and belt IMPORTANT: Check belt for proper routing in all mower pulley grooves. t 1. Raise attachment lift lever to highest position, 12, If necessary, adjust gauge wheels before operating mower as shown in the Operation section of this manual. 6, ATTACH FRONT LINK (E) - Work from left side of tractor, Insert rod end of link assembly through front hole in tractor front suspension bracket (F). 03042rex 22 TO LEVEL MOWER Ensure tires are properly inflatedto the PSI shown on tires. If tires are over or under inflated, it may affect the appearance of your lawn and lead you to think the mower is not adjusted properly. VISUAL SIDE-TO-SIDE ADJUSTMENT 1. With alt tires properly inflatedand if your lawn appears unevenly cut, determine which side of mower is cutting lower, 2, With a 3/4" or adjustable wrench, turn lift link adjustment nut (A) to the left to lower LH side of mower, or, to the right to raise LH side of mower. NOTE: Each full turn of adjustment nut will change mower height about 3/16. Turn nut right to raise mower FRONT-TO-BACK IMPORTANT." to-side. ADJUSTMENT Deck must be level side- Toobtain the best cutting results, the mower blades should be adjusted so the front tip is 1/8" to 1/2" lower than the rear tip when the _ln_ower is in its highest position. CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth. • Raise mower to highest position. • Position any blade so the tip is pointing straight forward. Measure distance (B) to the ground at front and rear tip of the blade. • If front tip of blade is not 1/8" to 1/2" lower than the rear tip, go to the front of tractor, • With an 11/16" or adjustable wrench, loosen jam nut A several turns to clear adjustment nut B. • With a 3/4" or adiustabie wrench, turn front link adjustment nut (B) clockwise (tighten) to raise the front of mower, or, counterclockwise (loosen) to lower the front mower. Turn nut left lower mower 3. Test your adjustment by mowing some uncut grass and visually checking the appearance. Readjust, if necessary, until you are satisfied with the results. PRECISION SIDE-TO-SIDE ADJ USTMENT 1, With alltires proper[yinflated, parktractor on level ground or driveway, CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth, ....... 2.-.Raise. mower.to its highest, posjtiQn........................... ....Loosen adjust 3. At both sides of mower, positionblade at Tighten_c nut B to lower side and measure the distance (A) from B to raisemower mower bottom edge of blade to the ground. The distance should be the same on both Loosen jam nut A first sides. 4. if adjustment is necessary, see step 2 in Visual Adjustment instructions above. NOTE: Each full turn of the adjustment nut 5. Recheckmeasurements, adjust ifneceswill change mower height about 1/8". sary until both sides are equal. Recheck measurements, adjust if necessary until front tip of blade is 1/8" to 1/2" lower than the rear tip, • Hold adjustment nutin position with wrench and tighten jam nut securely against adjustment nut. 23 TO REPLACE MOWER BLADE DRIVE BELT The mower blade drive bett may be replaced without tools, Park the tractor on level surface, Engage parking brake. BELT REMOVAL 1. Remove mower from tractor (See "TO REMOVE MOWER" in this section of manual). 2. Work belt off both mandrel pulleys and idler pulleys, 3. Pull belt away from mower. BELT INSTALLATION 1. Work belt around both mandrel pulleys and idler pulleys 2. Ensure belt is in all pulley grooves and inside all belt guides, & Install mower (See "To Install Mower" in this section of this manua0. Mandrel BELT INSTALLATION 1, installnew belt from tractorrear to front, over the steering plate (F) and above clutch brake pedal shaft (G). 2. Pull belt toward front of tractor and roll belt onto engine pulley (E). 3, Pull belt toward rear of tractor, Carefully work belt down around transmission cooling fan and onto the input pulley (D), Be sure belt is inside the belt keeper. 4. Install belt on centerspan idler (C). 5. tnstali belt through stationary idler (A) and clutching idler (B), 6, Ensure belt is in all pulley grooves and inside all belt guides and keepers, 7. Install mower (See "TO INSTALL MOWER" in this section of manual). Idler Pulleys Mandrel TO REPLACE MOTION DRIVE BELT Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest. BELT REMOVAL ...... 1,-'Remove mower (See. _'TO-REMOVE ......... MOWER" in this section of manual). NOTE: Observe entire motion drive belt and position of all belt guides and keepers, 2. Remove beltfrom statJonaryidler (A) and FRONT WHEEL TOE-IN!CAMBER clutching idler (B). "your new tractor front wheel toe-in and 3. Remove belt from centerspan idler (C). 6. Pull belt slack toward rear of tractor, camber is set at the factory and is normal. The front wheel toe4n and camber are not Carefully remove belt upwards from adjustable. If damage has occurred to transmission input pulley and over coolaffect the factory set front wheel toe-in or ing fan blades (D). 4, Remove belt downward from engine camber, contact a Sears or other qualified service center. pulley (E), 5. Slide belt toward rear of tractor, off the steering plate (F)and remove from tractor. 24 TO CHECK BRAKE If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced. You may also check brake by: 1. Park tractor on a level, dry concrete or paved surface, depress brake pedal all the way down and engage parking brake. 2. Disengage transmission by placing freewheel control in "transmission disengaged" position. Pullfreewheel control out and into the slot and release so it is held in the disengaged position. The rear wheels must lock and skid when you try to manually push the tractor forward. If the rear wheels rotate, then the brake needs to be serviced. Contact a Sears or other qualified service center, IMPORTANT: Your tractor is equipped with a 12vottsystem. The othervehicte must also be a 12 volt system. Do not use your tractor battery to start other vehicles. TO ATTACH JUMPER CABLES 1. Connect one end ofthe RED cableto the POSITIVE (+) terminal of each battery(AB),taking care notto short against tractor chassis. 2. Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fu!ly charged battery. 3. Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery. TO REMOVE CABLES, REVERSE ORDER1, BLACK cable first from chassis and then from the fully charged battery. 2. RED cable last from both batteries. TO REMOVE WHEEL FOR REPAIRS t. Block up axle securely. 2. Remove axle cover, retaining ring and washers to allow wheel removal (rear wheels have a square key- Do not lose). 3. Repair tire and reassemble. NOTE: On rearwheels only: align grooves in rear wheel hub and axle, Insertsquare key. 4. Reptacewashers and snap retaining ring securely in axle groove. 5. Replace axle cover. NOTE: To seal tire punctures and prevent flat tires due to slow leaks, purchase and use tire sealant from Sears. Tire sealant also prevents tire dry rot and corrosion, Weak or Dead Battery Fully Charged Battery REPLACING BATTERY n_asWbARNING:Do not short battery termiyallowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc. Positive terminal must be connected first to preventsparking from accidental grounding. 1. Lift seat pan to raised position. 2. Remove terminal cover. 3. Disconnect BLACK battery cable then RED battery cable and carefully remove battery from tractor. Washers Retaining .Seat J (Rear Wheel Only) TO START ENGINE WITH A WEAK BATTERY ,_LWARNING: Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries. If your battery is too weak to star[the engine, it should be recharged. (See "BATTERY" in the MAINTENANCE section ofthis manual). If "jumper cables" are used for emergency starting, follow this procedure: Terminal Bolt Cover..N Positive (Red) 25 , .. Nut . (Black) Negative 4. Insta!l new battery with terminals insame position as old battery. 5. Reinstall terminal cover. 6. First connect RED battery cable to positive (+) battery terminal with bolt and nut as shown. Tighten securely. 7. Connect BLACKgrounding cabieto negative (-) battery terminal with remaining bolt and nut. Tighten securely 8. Lower seat pan. TO REPLACE HEADLIGHT BULB 1. Raise hood. 2. Remove bulb holderfrom the hole inthe backside of the grill. 3. Repiace bulb in holder and install bulb holder securely back intothe hole in the backside of the grill. 4. Close hood. INTERLOCKS AND RELAYS Loose or damaged wiring may cause your tractor to run poorly, stop running, or prevent it from starting. • Check wiring. TO REPLACE FUSE Replace with 30 amp automotive-type plugin fuse. The fuse holder is located behind the dash. TO REMOVE HOOD AND GRILL ASSEMBLY t. Raise hood. 2. Unsnap headlight wire connector, 3. Stand in front of tractor. Grasp hood at sides, tilt toward engine and lift off of tractor. 4. When replacing hood, be sure to reconnect the headlight wire connector. HeadlightWire Connector 26 TRANSMISSION REMOVAL/ REPLACEMENT Should your transmission require removalfor service or replacement, it should be purged after reinstallation and before operating the tractor. See "PURGE TRANSMISSION" in the Operation section of this manual. ENGINE TO ADJUST THROTTLE CONTROL CABLE The throttle control has been preset at the factory and adjustment should not be necessary Check adjustment as described below before loosening cable. If adjustment is necessary, see engine manual. TO ADJUST CHOKE CONTROL The choke control has been preset at the factory and adjustment should not be necessary, If adjustment is necessary, see engine manual. TO ADJUST CARBURETOR Your carburetor has been preset atthe factory and adjustment should not be necessary, However, minor adjustment may be required to compensate for differences in fuel, temperature, altitude or load. If the engine does need adjustment, see engine manual. • Empty the fuel tank by startingthe engine and letting it run until the fuel lines and carburetor are empty. • Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur. . Use fresh fuel next season. NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel TRACTOR gum deposits during storage. Add stabilizer When tractor is to be stored for a period to gasoline in fuel tank or storage container. of time, clean it thoroughly, remove all dirt, Always followthe mix ratio found on stabilizer grease, leaves, etc. Store inaclean, dry area. container, Run engine at least 10 minutes 1. Clean entiretractor (See "CLEANING" in after adding stabilizer to al[owthe stabilizerto the Maintenance section of this manual). reach the carburetor. Do not empty the gas 2. Inspect and replace belts, if necessary tank and carburetor if using fuel stabilizer. (See belt replacement instructions in the ENGINE OIL Service and Adjustments section of this Drain oil (with engine warm) and replace manual). with clean engine oil. (See "ENGINE" in the 3. Lubricate as shown in the Maintenance Maintenance section of this manual). section of this manual. CYMNDER(S) 4. Be sure that al! nuts, bolts and screws 1. Remove spark plug(s). are securely fastened. Inspect moving parts for damage, breakage and wear. 2. Pour one ounce of oil through spark plug hole(s) into cylinder(s). Replace if necessary. 3. Tbrn ignition key to start position for a 5. Touch up all rusted or chipped paint few seconds to distribute oil, surfaces; sand lightly before painting. 4. Replace with new spark plug(s). BATTERY OTHER • Fully charge the battery for storage. • Do not store gasoline from one season to - After a period of time in storage, battery another, may require recharging. • Replace yourgasoline can ifyour can starts ° To help prevent corrosion and power to rust. Rust and/or dirt in your gasoline leakage during long pedods of storage, will cause problems. battery cables should be disconnected • If possible, store your tractor indoors and and battery cleaned thoroughly (see "TO cover it to give protection from dust and CLEAN BATTERY AND TERMINALS" in dirt. the Maintenance section of this manual). • Cover your tractor with a suitable protec, After cleaning, leave cables disconnected tive cover that does not retain moisture. and place cables where they can not come n contant with hatt_, term;-al Do not use plastic, Plasticcannot breathe : I:f' ba'_ery' is re'move_Yd from {r_act0rfOr ............. wh,ch a ows condensation to form and w,l)........ storage, do not store battery directly on cause your tractor to rust. concrete or damp surfaces. IMPORTANT: Never cover tractor while engine and exhaust areas are still warm, ENGINE FUEL SYSTEM IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel hose, or tankduring storage. Also, alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. Immediately prepare your tractor for Storage at the end of the season or if the tractor will be used for 30 days or more. RNING: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to coot before storing in any enclosure, 27 TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center. PROBLEM Will not start CAUSE J1 Out of fuel. 1 Fill fuel tank. 2 See "TO START ENGINE" in Operation section. Wait several minutes before attempting to start. Engine not "CHOKED" 3 Engine ftooded. 3 4 Bad spark plug. 4 Replace spark plug. 5 Dirty air filter. 5 Clean/replace 6 Dirty fuel filter. 6 Replace fuel filter. 7 Water in fuel. 7 Empty fuel tank and carburetor, refill tank with fresh gasoline and replace fuel filter. 8 Loose or damaged wiring. 8 Check allwiring. 9 Carburetor 9 See "To Adjust Carburetor" in Service and Adjustments section. 10 Contact a Sears or other qualified I service center. 1 properly. out of adjustment, Engine valves out of adjustment. 1 Dirty air filter. 2 Bad spark plug. 2 3 Weak or dead battery, 13 Clean/replace air filter. air filter. Replace spark plug. Recharge or replace battery. Dirty fuel filter, 4 Replace fuel filter. 5 Stale or dirty fuel. 5 Empty fuel tank and refill tank witt fresh, clean gasoline. 6 Loose or damaged 6 Check all wiring. 7 Carburetor 7 See "To Adjust Carburetor" in Service and Adjustments section. 4 wiring. out of adjustment. Contact a Sears or other qualified service center. Engine valves out of adjustment. Engine will not turn over ECTiON 2 lO Hard to start CORn Depress clutch/brake pedal. 2 Disengage 3 Recharge or replace battery. Clutch/brake 2 Attachment 3 Weak or dead battery. 4 Blown fuse, 5 Corroded battery terminals. 5 Clean battery terminals. 6 Loose or damaged wiring. 6 Check all wiring. 7 Faulty ignition switch. 7 Check!replace ignition switch. 8 Faulty solenoid or starter, 8 Check!replace solenoid or starter. Faulty operator presence switch(as), 9 Contact a Sears or other qualified service center. 9 pedal not depressed 1 1 clutch is engaged, attachment clutch. Replace fuse. 28 TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center. Engine clicks will not start CORRECTION CAUSE PROBLEM but 1 1 Recharge or replace battery, Corroded battery terminals, 2 Clean battery terminals. 3 Loose or damaged wiring. 3 Check all wiring. 4 Faulty solenoid or starter. 4 Check/replace 2 Loss of power Weak or dead battery, solenoid or starter. 1 Cutting too much grass/too 1 Raise cutting height/reduce 2 Throttle in "CHOKE" position. 2 Adjust throttle control. 3 Build-up of grass, leaves and trash under mower. 3 Clean underside housing, 4 Dirty air filter. 4 i Clean/replace air filter, 5 Low oil IeveIidirty oil. 5 Check oil level/change 6 Faulty spark plug. 6 Clean& regaporchangespark 7 Dirty fuel filter. 7 Replace fueI filter. 8 Stale or dirty fuel. 8 Empty fuel tank and refill tank with fresh, clean gasoline. 9 Water in fuel, 10 Spark plug wire loose. 10 Connect & tighten spark plug wire. 11 Dirty engine air screen!fins. 11 Clean engine air screen/fins, 12 Dirty/clogged 12 Clean/replace Check all wiring, fast. speed of mower oil. plug. Empty fuel tank and carburetor, refill tank with fresh gasoline and replace fuel filter. muffler, muffler. 13 Loose or damaged wiring. 13 14 Carburetor 14 See "To Adjust Carburetor" in Service and Adjustments section. 15 Engine valves out of adjustment. 15 Contact a Sears or ether qualified service center. out of adjustment. 1 Worn. bent or loose blade. 2 Bent blade mandrel, 2 Contact a Sears or other qualified service center, Loose/damaged 3 Tighten loose part(s). Rep ace damaged parts. part(s). Engine continuesto .......1 - Faulty operator-safety control system. run when operator leaves seat with attachment clutch engaged Replace blade. Tighten blade bolt Check wir_ng_switches and ............. connections, tf not corrected. contact a Sears or other presence ..... Poor cut - uneven 1 Worn. bent or loose blade. 1 Replace blade, Tighten blade bolt cutting 2 Mower deck not level, 2 Level mower deck. Buildup of grass, leaves, and trash under mower, 3 Clean underside housing. 4 Bent blade mandrel. 4 Contact a Sears or other qualified service center. 5 Clogged mower deck vent from build-up of grass, leaves, and trash around mandrels, 5 Clean around mandrels open vent holes. of mower 29 ,. = to TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center. PROBLEM Mower blades will not rotate Poor grass discharge CAUSE CORRECTION 1 Obstruction in clutch mechanism, 1 Remove obstruction, 2 Worn/damaged 2 Replace mower drive belt. 3 Frozen idler pulley. 3 Replace idler pulley, 4 Frozen blade mandrel, 4 Contact a Sears or other qualified service center. i 1 Engine speed too slow, 1 Place throttle control in "FAST" position, i2 Travel speed too fast, 2 Shift to slower speed, 3 Wet grass. 3 Allow grass to dry before mowing, 4 Mower deck not level. 4 Level mower deck. 5 Low/uneven tire air pressure, 5 Check tires for proper PSI, 6 Worn, bent or loose blade. 6 Replace/sharpen blade bolt. 7 Buildup of grass, leaves and trash under mower, 7 C{ean underside housing. 8 Mower drive belt worn. 8 Replace mower drive belt. 9 Blades impreperly 9 Reinstall blades sharp edge down. mower drive be[t. installed.. 10 blade. Tighien of mower 10 Improper blades used. Replace with blades listed in this manual, 11 Clogged mower deck vent holes 11 from buildup of grass, leaves, and trash around mandrels. CIean around mandrels to open vent holes. 1 Light switch is "OFF". I Turn tight switch "ON". 2 Bulb(s) or lamp(s) 2 Reptace bulb(s) or lamp(s). 3 Faulty light switch, 3 Check/replace 4 Loose or damaged wiring, 4 Check wiring and connections, 5 Blown fuse, 5 Replace fuse. I Bad battery ceil(s). 1 Replace battery. 2 Poor cabIe connections, 2 Check/clean 3 Faulty regulator 3 Replace regulator. 4 Fautty alternator, 4 Replace alternator. ,.,,,,,, .............. Headlight(s) not working (if so equipped) Battery charge will not burned ouL (if so equipped). 3O light switch, all connections. TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center. PROBLEM ICAUSE Loss of drive CORRECTION 1 Freewheel control in "DISENGAGED" position. 1 Place freewheel control in "ENGAGED" position. 2 Debris on steering plate (if equipped), 2 See "CLEANING" in the maintenance section. 3 Motion drive beJt worn, damaged, or broken. 3 Replace motion drive belt. 4 Purge transmission. 5 Insta8 axle key at rear wheel. See "TO REMOVE WHEEL" in the Service and Adjustments section. 4 i5 i Air trapped in transmission I shipment or servicing. during Axle key missing. ,,,,,L Engine "backfires" when turning engine "OFF" ......... 1 Engine throttle control not eel 1 Move throttle control between between half and full speed (fast half and ful! speed (!ast) position position before stopping engine. i before stopping engine. 1 Reverse operation system (ROS) is not "ON" while mower or other attachment is engaged, , ,_ ,,.,,..................... Engine dies when tractor is snirted into reverse 1 Turn ignition key to ROS "ON" position. See Operation section. NEED MORE HELP? a_d more on managemyhome.com i You'tl find the answer i " Find this and a[[ your other product - for free! _! manua[s online. • Get answers from our team of home experts. • . Get a personalized i " Find information manage i maintenance and tools pl.an for your home. to he|p with home projects. home brought to yon l_y Sea_s 31 _ SUGGESTED G3 ro GUIDE FOR SIGHTING SLOPES ONLY RIDE UP AND NOT ACROSS HILL 15 DEGREES DOWN FOR SAFE OPERATION HILL, MAX, down the face of slopes, never across the face. Do not mow WARNING: To avoid serious injury, operate your tractor up and slopes greater than 15 degrees. Make turns gradually to prevent tipping or loss of control. Exercise extreme caution when changing direction on slopes. 1. Foid this page along dotted line indicated above. 2. Hold page before you so that its left edge is vertically parallel to a tree trunk or other upright structure. 3r Sight across the fold in the direction of hill slope you want to measure. 4_ Compare the angle of the fold with the slope of the hill Garantia .......................................................... Reglas de Seguridad ...................................... Especificaciones del Producto ........................ MontajeiPre Operaci6n ................................... Operaci6n ....................................................... Mantenimiento ................................................ 33 34 37 38 40 47 Prograrna de Mantenimiento .......................... 47 Servicio y Ajustes ........................................... 42 Almacenamiento ............................................. 58 Identiflcaci6n de Problemas ........................... 59 Servicio Sears ............................. Contraportada Garantia para equipos tractores Craftsman GARANTJA COMPLETA DE CRAFTSMAN PeR DOS Af'4OS desde ]a fecha de compra, todas [as partes no sustituibtes de este equipo tractor est_n garantizadas contra cualquier defecto de material o mane de obra. Una parte no sustituible defectuosa recibir& reparaci6n o reemp]azo gratuite en case si la reparaci6n es imposible. PeR CINCO ANOS desde Ia fecha de compra, el bastidor y el eje delantero de este equipo tractor estan garantizados centre cualquier defecto de material o mane de obra. Un bastidor o eje delantero defectuoso recibir_ reparaci6n o reemplazo gratuito en case si Ia reparacion es imposible. DURANTE 90 DJ'AS desde la fecha de compra, la bateria (una parte sustituible) de este equipo tractor est,. garantizada centre cualquier defecto de material o mane de obra (nuestra prueba comprueba que no contendr_ carga). Una bateria defectuosa recibir_, un reemplazo gratulto en case. GARANTiA LIMITADA DE PeR VIDA ADICIONAL en el EJE DELANTERO DE HIIERRO COLADO (si estb provisto) DURANTE EL TIEMPO EN QUE SE USE per el propietario original despu6s del quinto afro a partir de ia fecha de compra, el eje delantero de hierro colado (si est_ provisto) de este equipo tractos est& garantizado centre cualquier defecto de material o mane de obra, Con el comprobante de compra, un eje delantero de hierro colado recibir_ un reemplazo gratuito en case. SERVIClO DE GARANTJA Pare conocer los detalles de la cobertura de garantia pare obtener una reparaci6n llame al 1-800-659-5917 6 visite el sitio web: www. craftsman.cam c reemp_azo gratuito, En redes los cases anteriores, si et reemplazo es imposible, el equipo tractor ser_ sustituido sin cargo con el mismo modefo o uno equivalente. Toda la cobertura de garantia anterior ser& nula si este equipo tractor se utiiiza alguna vez pare brindar servicios comerciales o si se alquila a otra persona. Esta garantia cubre 0N]CAMENTE defectos de mate rial y mane de obra. La cobertura de garantia NO incluye: • Partes sustituibles (excepto la bater[a) que se puedan desgastar per eI use normal dentro del periodo de garantJa incluso, pete sin limitarse a, cuchillas, bujias, filtros de aire, correas y filtros de aceite. • Servicios de mantenimiento est&ndar, cambios de aceite o afinaciones. ° Reemplazo o reparaci6n de neum_ticos per pinchazos causados per objetos extemos come cfavos, espinas, tecones o vidrios. .......,_'_Reemplazo o reparaci6n-de neumAticos o ruedas per desgaste norma]_ aceidentes.o per operaci6n o ...... mantenimiento incorrectos. • Reparaciones necesarias per abuse del operador incluso, pare sin limitarse a, rases causados per remolcar objetos qua superen la capacidad deI equipo tractor, chocar contra objetes qua doblen el bastidor, el ensamble det eje o el cig_e_aI o sobrepasar la velocidad del motor. • Reparaciones necesarias per negfigencia del operador, incluso (pare sin Iimitarse a ella) da_.os eI6ctricos y mec&nicos causados per el almacenamiento incorrecto, per no usar el grade y Ia canfidad correctos de aceite de motor, per no mantener dot muelle Iibre de residues infiamables o per no mantener el equipo tractor de acuerdo con las instrucciones qua contiene et manual deI operador. • Limpieza o reparaciones de1 motor (sistema de combustible) cuando se determina que se us6 combustible contaminado y oxidado (sarro). En general, el combustible debe usarse dentro de los 30 dJas posteriores a su compra. ° Deterioro y desgaste normal de los acabados extedores o sustituci6n de r6tulos de productos. Esta garantJa le oterga derechos legales especfficos, y usted tambi6n puede tener otros detaches que varian de un estado a otto. Sears Brands Management Corporation, Hoffman Estates, IL 60179 33 _PELIGRO: Esta Maquina cortadora es capaz de amputar las manosy los pies y de lanzar objetos, si no se observan las instrucciones de seguridad siguientes se pueden producir lesiones graves o la muerte. • No maneje fa m&quina si no tiene la trarnpa _DVERTENCIA: Siempre desconecteel alampara c@spedcomp]eta, la canaleta de descarga bre de la buj(a y p6ngalo donde no pueda entrar u otros dispositivos de seguridad en su lugar en contacto con la buj[a, para evitar el arranque yen foncionamiento. per accidente, durante la preparaci6n, el trans• RaIentizar antes de girar. porte, el ajuste o cuando se hacen reparaciones. • Nunca dejar una m_quina encendida sin vigk _I_DVERTENCIA: Noavance cuestaabajo a punlancia. Apagar siempre las cuchil[as, poner el tomuerto ya quepodriapettierel cor_roldeltractor. freno de estacionamiento, parar el motor, y _I_DVERTENCIA: Remolque solamente los quitar Ias [laves antes de bajar. accesorios recomendados y conformes a las • Desenganche Ias hojas cuando noest_ cortancaracteristicas indicadas per el fabricante de su de c6sped. Apague el motor y espere hasta que tractor. Tenga cuidado y prudencia al utilizar el todas [as partes se detengan per complete an* tractor. Cuando se encuentre en un declive, oper tes de limpiar Ia m,_quina, retirar ]a trampa para utilizandoexclusivamente la velocidad m_.sbaja. c6sped o destapar la canaleta de descarga. En case de un declive una carga excesiva po•Hacer funcionar Ia m_,quina s61o con la luz del dr[a resultar peligrosa. Los neum_.ticos pueden dia o luz artificial buena. perder la tracci6n con el suelo y hacerle perder ° No hacer funcionar la m&quina estando bajo el control de su tractor. los efectos de alcohol o droga. _DVERTENCIA: El tube de escape deI motor, • F'oner atenci6n al tr_.fico cuando se opera cerca de calles o se cruzan. algunos de sus constituyentes y algunos componentes del vehiculo contienen o desprenden • Poner la m&xima atenciSn al cargar o descarproductos quimicos conocidos en el Estado de gar la m&quina en una caravana o cami6n. California come eausa de c&ncer y defectos af • Llevar siempre galas de protecci6n cuando se nacimiento u otros dafios reproductivos. hace funcionar la m_quina. _I_ADVERTENCIA: Losbornes, terminales yac• Los dates indicanque los operadores a partir cesorios relatives de la bateria contienen plomo de los 60 aries est&n afectados per un gran o compuestes de plomo, productos quimicos percentaje de heridas relativas a la conducci6n conocidos en el Estado de California come causa del cortac_sped. Estes eperadores tendrtan de c,_ncer y defectos al nacimiento u otros dafios que evaluar su habilidad de hacer funcionar reproductivos. Lavar las manes despu@s de el cortac@sped de mode Io bastante seguro manipularlos. para proteger a si mismos y a otras personas de heridas graves. !, FUNCIONAMIENTO GENERAL • Seguir tas recernendaciones del fabricante • Leer,entender y seguir todas Ias instrucciones para los pesos y contrapesos de Ias ruedas. sobre Ia m&quina y en el manual antes de • Mantener ta m&quina Iibre de hierba, hojas u empezar. otros escombres que pueden tocar el tube de • No porter las manes o los pies cerca de partes escapeipartes deI motor calientes y quemarse. giratorias o debajo de ]a m&quina, rnantener No permitir que el puente deI cortac@sped siempre Iimpia Ia abertura de descarga. cargue hojas u otros residues que pueden • Permitir el funcionamiento de la m&quina s61o causar acumu[aciones. Limpiar toda salpica........ a adultos.que instrucciones. tengan familiaridad, con las .............. dura de aceiteo Lirnpiar el _rea de objetos come piedras, juguetes, cables, etc. que pueden ser recogidos y disparados con ias cuchillas, , Asegurarse de que el &rea est6 Iibre de otras personas antes de ponerla en marcha. Parar la m_.quina si alguien entra en el ,_rea. , Nunca llevar pasajeros. . No coFtar marcha atr&s al no ser absolutamente necesario. Mirar siempre abajo y detante mientras se precede atr&s. Nunca dirigir el material descargado hacia nadie. Evitar descargar material contra paredes u obstrucciones. El material podria rebotar hacia el operador. Parar Ias cuchiIIas cuando se pasan superficies de grava. 34 carburante antes de hacer operaciones sobre la m&quina o guardarla. Dejarla enfriar antes de guardarla. I!. FUNCIONAMIENTO EN PENDIENTES !_aspendientes son ei mayor factor de accidentes relatives a la p_rdida de control y vuelco, que pueden causar severas heridas o muerte. El funcionamiento en pendientes requiere una atenci6n extra. Si no es posible hacer marcha atr_s en una pendiente o site sientes incomodo, no la cortes. • Cortar hacia arriba y abajo de una pendiente, no de mode horizontal • Poner atenciones a los hoyos, Ias rafces, los buttes, las piedras u otros objetos escondidos. El terreno irregular puede velcar Ia m&quina. La hierba atta puede esconder obst&culos. ° Escoger una velocidad de maroha baja de mode que no sea necesado pararse o cambiar estando en una pendiente. ° No co]tar la hierba mojada, !_as ruedas pueden pettier tracci6n. Poner siempre una marcha cuando se est& en pendientes. No poner en punto muerto e ir cuesta abajo. . Evitar arrancar, pararse o girar en una pendiento. Si las ruedas pierden tracci6n, desconectar |as cuchillas y preceder despacio cueste abajo en Ia pendiente. • Mantener todo los movimientos en las pendientes tentos y gradual, No haoer cambios repentinos de velocidad o direcci6n, ya que pueden causar el escape de la m&quina. . Poner la m&xima atenci6n cuando Ia m&quina funciona con captadores de hierba u otros dispositivos enganchados; pueden afectar la estabilidad de la m_.quina. No usar en pendientes amp|hades. • No intentar estabilizar {a m_quina poniendo el pie en el terreno. • No cortar cerca de bajadas, cunetas y orillas. Las m&quina puede votcarse improvisamente si una rueda est& en et borde o se hunde. IlL NINES • Toner el m&ximo cuidado c_uando se acerca a cantos ciegos, arbustos, &rboles u otros objetos que pueden impedir la vista de ni_os. IV. REMOLQUE • Remolcar s61ocon una m&quina que tenga un gancho disef_ado para remolcar, Enganchar ei equipo o remolcar s61o en et punto dispuesto aI efecto. • Seguir las recomendaciones del productorcon respecto a los limites del equipo per remolcar y el remo[que en pendientes. - Nunca permitir qua nifios u otras personas est@ndentro del equipo per remolcar. • En pendientes, el peso del equipo remo/cado puede causar la p6rdida de tracci6n y la p@rdida de control. • Viajar despacio y dejar m&s distancia para frenar. V. SERVICIO MANIPULACI6N SEGURA DE LA GASOLINA Para evitar heridas personales o da_os alas cosas, poner el m&ximo cuidado a Ia hera de manipular la gasollna. La gasolina es extremamente inflamab[e y los vapores son explosives, • Apagar redes los cigarrillos, cigarros, pipas y otras fuentes de ignici6n. • Usar s61ocontenedores para gasolina aprobados. _ADVERTENCIA: LOS NII_IO$ PUEDEN SUFRtR DANES CON EL use DE ESTE EQUIPC. La Academia Estadounidense de Pod|atria - Nunca quitar el tap6n de la gasolina o afiadir {American Academy of Pediatrics) recomienda carburante con el motor en mar€ha, dejar enfi'iar el motor antes deI abastecimiento de que s6_o se permita a niSos con una edad minima de 12 ahos manejar m#,quinas oortac#sped la gasolina. manuales, y at menos de t6 aSos para manejar • Nunca abastecer la m&quina at interior de un tractores cortac6sped. local, Si el operador no pone atenci6n a la presencia • Nunca guardar la m_.quina o et contenedor de los niSos pueden ocurrir accidentes tr&gicos, del carburante deride haya una llama abierta, chispas ouna luz piloto come un calentador Los nifios a menudo est&n atraidos per ta m_quide agua u otros dispositivos. na y las actividad de cortar. No dar per hecho • Nunca Ilenar tos contenedores aI interior de de que los niSos se queden adonde estaban Ia 01tima vez que los vistas, un vehiculo oen una caravana o cami6n Mantener os n hos fuera de _trea de co rte y........................ recub ertos con un forro de p &st co , Co coat ............................. vigilados per un adulto responsabIe que no sea siempre los centenedores ene terreno lejos ............. el operador, dot vehicu]o cuando se est& Ilenando. • Estar a|erta y apagar la mAquina si un ni_os " Quitar el equipo de gas deI cam_n o caravana y abastecerlo en el terreno. Si no es posible, entra en el &rea, abastecer dicho equipo con un contenedor por• Antes y durante la marchaatr&s, mi[ar adelante t&til, m&s bien qua de un surtidor de gasolina. y abajo para ver si hay ni_,os peque5os, • Nunca Ilevar niSos, incluso si hay las cuchiIlas " Mantener la boquilla a contacto del borde del dep6sito de carburante o la abertura de] apagadas. Podrfan caer y herirse seriamente contenedor durante toda la operaci6n de o interferir con el funcionamiento seguro de la abastecimiento. No utilizar un dispositivo con m_.quina, los niSos qua se han Ilevado precboquiila cerrada-abierta. edentemente pueden aparecer de pronto en el &rea de torte per otto paseo y set atropellados " Si se vierte _,,arburante sobre la rope, cambiapse la ropa inmediatamente. o tumbados per ia m&quina, - Nunca dejar que los niSos manipulen Ia m&" Nunca Ilenar el dep6sito m&s de Io debido. Volver a co|ocar el tap6n del gas y cerrar de quina. mode firme. 35 OPERACIONES DE SERVICIO GENERALES • Nunca hacer funcionar ]a m_quina en un &rea cerrada, • Mantener todas Ias tuercas y pemos apretados para asegurarse de quetrabaja en condiciones seguras. • Nunca modiflcar los dispositivos de segu ridad, Controlar su correcto funcionamiento regularmente, • Mantener Ia m-4,quina libra de hierba, hojas u otros residues acumulados. Limpiar ins sa[picaduras de aceite o carburante y quitar cualquier cosa mojada con carburante. Dejar qua la m&quina se enfrie antes de guardaria. ! i Si se golpea un objeto ajeno, hay qua pararse e inspeccionar la m&quina, Reparar, si es necesario, antes de vo]ver a porter en marcha. Nunca hacer ning_n ajuste o repamci6n con el motor en 1unciSn. Verifique los componentes de la trampa para c_sped y la canaleta de descarga con frecuencia y sustituya con repuestos recomendados par el fabricante cuando sea necesado. Las cuchillas deI ¢ortac_sped son afiladas. Envolver |a cuchiUa, ponerse guantes y paner ia m&xima atenci6n cuando se hacen operaclones en elias, @@@@@ • Controlar el funcionamiento deIfreno frecuent• Estar alert_( y apagar la m&quina si Un nifos entra en el _-rea. emente. Ajustar y hacer Ins operaciones de mantenimiento cuando eso sea necesario. • Antes y durante Ia marcha atr&s, mirar adeiante • Mantener y sustituir Ins etiquetas de seguridad y abajo para ver si hay nifos pequefos. e instrucci6n, cuando sea necesario. • Cortar hacia arriba y abajo de una pendiente ° Asegurarse de que e] &rea est_ libre de otras (15 ° Max), no de mode horizontal. personas antes de poneria en marchao para la • Escoger una vetocidad de marcha baja de m_.quina si alguien entra en el &tea, mode que no sea necesario pararse o cambiar estando en una pendiente, - Nunca Ilevar pasajeros. , No cortar marcha atr_.sal no ser absolutamente • Evitararrancar, pararseogirarenunapendienre. Si las ruedas pierden tracciOn, desconectar necesario. Mirar siempre abajo y delante ias cuchi]las y preceder despacio cuesta abajo mientras se precede atr&s. en la pendiente. • Nunca Ilevar niSos, incluso si hay las cuchillas apagadas. Podr|an caer y herirse seriamente - Si la m&quina se para mientras va cuesta arfiba, desconectar ins cuchilIas, porter la o interfefir con el funcionamiento seguro de la marcha atr&s y ir hacia atr&s despacio. m&quina, los nihos qua se han Uevado precedentemente pueden aparecer de pronto en el • No girar estando en pendientes si no es nece_rea de carte par otro paseo y set atropellados sario, y luego girar despacio y gradualmente o tumbados par la m__quina. cuesta abajo, si es posible, • Mantener los nihos fuera del &tea de carte y ...... A .cargarodescargar a m&quina, no sobrepase .......... ......vigil_6s pSr _.J5a_duttoi:esp55§al:)teque n0sea el &ngulo m&ximo recomendado de 15% el operador, 36 ESPECIFICACIONES DEL 2.5 Galones19.46 L Regular Sin Ptomo Tipo de Aceite (APt: SG-SL): SAE 10W30 (sobre 32°F/0_C) SAE5W30(deabajo32°F/0 C) Capacidad Aceite: Con Filtro: Sin Filtro: de Bujia Sistema Carga: 51 Oz./1,5 L 35 Oz.ii ,05 L Champion RC12YC (Abertura: .030"/0.76 de 15 Amps En el estado de California, la ley exige lo anterior (Secci6n 4442 del "California Public Resources Code"). Otros estados pueden center con otras leyes parecidas. Las 1eyesfederales se aptican en la tierras federales, Su centre de Servicio m&s cercano tiene disponible amortiguadores de chispas pare el silenciador. (Vea la secci6n de Partes de Repuesto en el manual Ingles del duefio,) PRODUCTO Capacidad y Tipo de Gasoline: ram) @ 3600 RPM Bater[a: Amp/Hr: Min, CCA: Modelo Tamaflo: Torsi6n del Perno de {a Cuchilla: 45-55 Ft, Lbs./62-75 28 230 U1R Nm FELICITACIONES per la compra de su tractor, Ha side diseflado, p[aniflcadoy fabricado pare darle la mejor confiabilidad y el mejor rendimiento posible. En el case de que se encuentre con cualquier problema que no pueda solucionar _cilmente, haga el favor de ponerse en contacto con un centre de servicio Sears o con un otto centre de servicio cualificado, Cuenta con representantes bien capacitados y competentes y con las herramientas adecuadas pare darle servicio o pare reparar este tractor. Haga el favor de leer y de guardar este manual, Estas instruc-ciones Ie permitir&n montar y mantenor su unidad en forma adecuada. Siempre observe las "REGLAS DE SEGURIDAD2 RESPONSABIUDADES DEL CL|ENTE • Lea y observe Ias regtas de seguridad, • Siga un programa regular de mantenimiento, cuidado y use de su tractor, - Siga tas instrucciones descritas en las secclones "Mantenimiento" y "Almacenamiento" de este manual. AOUERDOS DE PROTECCION PARA LA R EPARAClON Congratulaciones per su buena compra. Su nuevo producto Craftsman® est& diseSado y fabricado para funcionar de mode fiable per touches a_os. Pete come redes los productos. puede necesitar alguna reparaci6n de tanto en tanto. En este case tenor un Acuerdo de Protecci6n pare la Reparaci6n puede hacedes ahorrar dinero y fastidios, Compre ahora un Acuerdo de Protecci6n pare Ia Reparaci6n y prot6gese de molestias y gastos inesperados, Un Acuerdo incluye los puntos siguientes: • Servicio experte de nuestros 12.000 especialistas profesionales en la reparaci6n. • Servicio ilimitado sin cargo alguno para las partes y la mano de obra sobre todas las reparaciones garantizadas, • 8ustituci6n del producto si su producto garantizado no puede ser arreglado, ° Desouento de110% sobre el precio cordente del servicio y de las partes relatives el servicio no cubiertas per el acuerdo; tambi_n el 10% menos sobre el precio corriente de un control de mantenimiento preventive, • Ayuda r_pida per tel6fono- soporte telef6nico per parte de un representante Sears sobre productos que requieren un arreglo en case, y adem&s una programaci6n sobre los arreglos m&s convenientes. Cuando se ha comprado el Acuerdo, basra con una Ilamada telef6nica para programar el servicio, • Utilice prendas de seguridad edecuadas al Puede Ilamar cuando quiera, dia y noche o fijar manejar la m&quina, incluidos (come mfnimo) en linea una cite para obtener el servicio, Sears calzado de seguridad, galas protectoras y protiene m&s de 12.000 especialistas profesionales tecci6n auditiva. No utilice pantalones cortes en la reparaci6n, que tienen acceso a m&s de yio calzade abierto cuando corte la hierba, 4,5 milIones de partes y accesofios de calidad. _;._informe sier_pre=a,algt]ien de que sedispone .......... Este esel tipo de prefesionalidad con que puede ........ a cortar ta hierba en el exterior, contar pare ayudar a alargar la vide del producto que acaba de comprar, per touches aries. _&,DVERTENCIA: Este tractor viene equipado iCompre hey su Acuerdo de Protecci6n pare la con un motor de combusti6n interne y no se debe Reparaci6n! usar sobre, ocerca, de un terreno no desarrollado Se aplican algunas limitaciones y exclusiones. cubierto de bosques, de arbustos o de c6sped, Para conocer los precios y toner mds Inforo menos que el sistema de escape del motor macibn, Uame al 1-800-827-6655. venga equipado con un amortiguador de chispas que cumpla con tas leyes locales o estatales {si SERVICIO DE INSTALACION SEARS existen), Si se usa un amortiguador de chispas, et operador debe mantenerlo en condiciones de Para /a insta/aci6n profesiona/ Sears de aparatrebajo eficientes. tos de casa, puertas de garaje, calentadores de agua y otros importantes artlculos pare la case, en U,S,A Ilamar a 1-800-4-MY-HOME® 37 Llaves Hoja de pendiente (1) Tubo de des_g _e Llaves {_} AccBso_o d_l con_xidn Su tractor nuevo ha sido montado en la f_.brica con Ia excepci6n de aquelias parses que no se han montado por razones de envfe. HERRAMIENTAS NECESARIAS PARA EL MONTAJE Etiqueta Un juego de Ilaves de tube facilitar& et montaje. A continuaci6n se enumeran los tamafios de tas liaves est&ndar, (1) Llave de 1/2" Cuchillo (2) Llaves de 7/16" Medidor de presi6n Pinzas Cuando en este manual se mencionan los terminos "mano derecha" o "mano izquierda" se re_ere a cuando usted se encuentra en la posici6n de operaci6n (sentado/a detrds del volante de direcci6n). AJUSTEELASIENTO PARA REMOVER EL TRACTOR DE LA CAJA DE CARTON DESEMPAQUE LA CAJA DE CARTON • Remueva todas las partes sueltas que est6n accesibtes, y las cajas de partes, de la caja de cart6n grande. • Cortar a Io largo de las I{neas de puntos en todos los cuatro paneles de ca_t6n. Remover {os paneles de cierre y aplanar los pane[es laterales. • Revise si hay partes sueitas adicionales o cart6n y remu_valas. ANTES DE REMOVER EL TRACTOR DE CORREDERA VERIFIQUE 1. Si@ntesesobre el asiento. 2. 3. Levante Ia palanca del ajuste (A) hacia arriba y mueva e! asiento hasta que alcance una posici6n c6modaque Iepermitapresionar compietamente sobre el pedal del embragueifreno. Desconecte Ia palanca paratrabar el asiento en la posici6n. i !iiii LA BATER{A 1, Levante del asiento a ]a posici6n levantada. AVISO: Si esta bateria esta utilizadadespu6s de[ mes y a_o indicado sobre la etiqueta (ta etiqueta que se encuentra entre los terminales), cargue la bateria por un minimo de una hora a 6-10 amps. (Vea "BATER[_' en Ia secci6n de Mantenimento de este manual). • Para instale Ia bater{a, y cable de la bater{a, reaHcee] procedirnientodescrito en "REEMPLAZAR LA BATERI_' deI eap{tulo de Servicio y Ajustes de este manual. 38 AVISO: Ahora puede rodar su tractor fuera de la corredera. Siga Ias siguientes instrucciones para remover el tractor de la corredera. J ADVERTENOIA: Antes de empezar, leer, entender y seguir todas las instrucc[ones presentesen la secci6n Operaciones de este manual. Asegurarse que el tractor est_ en un &tea bien ventilada. Asegurarse que la zona delante del tractor est6 libre de otras personas y objetos. PARA HACEFI RODAR EL TRACTOR FUERA DE LA CORREDERA (Vea |a secci6n de la operacl6n para |a local|dad y la funci6n de los controles) 1 2 3 4 LISTA DE REVISI6N Antes de operar y de disfrutar de sutractor nuevo, le deseamos que reciba el meier rendimiento y ]a mayor satisfaction de este productode ealidad, Haga el favor de revisar la lista a continuacien: J" Se hancompletado todas Ias instruccionesde mon_je, Vr Noquedan partes suettas en Ia cajade cart6n. t/" La bateria est& preparada y cargada en forma adecuada. Levante la palanca de levantamiento del accesorio a su posici6n m&s alta. Suelte el frene de estacionamiento presionando el pedal del embrague/freno. Ponga el control de la rueda libre en la posici6n de giro libre para desenganchar Ia transmisi6n. (Vea "PARA TRANSPORTAR" en Ia secci6n de Operaci6n de este manual). Haga rodar el tractor hacia delante fuera de la corredera. 5 Remueva las bandas que sujetan la protecci6n contra Ia descarga en contra deI tractor. Continuar con las siguientes instrucciones. REVISION DE LA PRES|ON DE LAS LLANTAS Las Ilantas en su unidad fueron infladas demasiado en Ia f&brica per razones de envio. La presi6n de las Ilantas correctas es importante para obtener el meier rendimiento en el corte. • Reduzca la presi6n de los neum&ticos a la PSI que se indica en estos. REVISION DE LA NIVELACION DEL CON JUNTO Para obtener los mejores resultados en el corte, la caja de la segadora tiene (]ue estar nivelada en la forma adecuada. Vea 'PARA N1VELAR LA CAJA DE LA SEGADOR_' en la secci6n de Servicio y Ajustes de este manual. El asiento ha side ajustado en forma c6moda y apretado en forma segura, J" Todas las Ilantas han side infladas en forma adecuada. (Para fines de envlo, Ias liantas se inflarondemasiado en ta f_.brica.) vf AsegQrese que el conjunto segador est_ nivelado en forma adecuada, de lade a lade y desde adelante hacia atr__s,para obtener los mejores resultados en el corte. (Las ltantas tienen que estar infladas en forma adecuada para la nivelaci6n.) V( Revise Ias correas de impulsi6n y de la segadora. AsegQrese que recorran el paso adecuado alrededor de las poleas y dentro de todos los fijadores de las correas. V_ Revise el alambrado. Ffjese que todas las conexiones todavia est_n seguras y que los alambres estOn sujetos en forma adecuada, i/" Antes de conducir el tractor, aseg0rese que el control de rueda libre este en la posici6n de "transmisi6n enganchada" (Vea "PARA TRANSPORTAR" en la secci6n de Ia Operaci6n de este manual), AI mismo tiempo que aprende a come usar su tractor, preste atencion extra a los puntos de [mportancia que se presentan a continuacion: i/El aceite deI motor tiene que tlegar al niveI adecuado. J El estanquede combustibletiene queestar lIeno con gasolina sin plomoregular, nueva ylimpia. t/" Familiaricese con todos los contro[es - su ubicaci6n y su funci6n. Op6relos antes de hacer arrancar el motor. REVISION DE LA POSICl6N ADECUADA ..... DE TOD&S. LASCO!].REAS Vq Aseg0rese que el sistema de frenos est_ en Vea las figuras que aparecen para cambiar ia.s ........... . unacondici6nde operaci6n segura_ .................... correas de impuLsi6n de la cuchilla de la segaJ" Asegurarse de que el Sistema de Presencia dora y de movimiento en la secci6n de Servicio y de10perador y el Sistema de Funcionamiento A_ustes de este manual. Verifique que las correas Atr&s (ROS) funcionan de mode adecuado sigan su paso correcto. (Vet las Secciones de Funcionamiento y tVtantenlmlento en este manual) " REVISION DEL SISTEMA DE FRENOS ' " Una vez que usted haya aprendido a manejar su t/Es importante purgar la transmisi6n antes de tractor, verifique que el freno funcione correctaoperar su tractor per la primera vez. Siga tas instruccionesadecuadas para el empiezo y mente. Vet "PARA VERIFICAR St FUNCIONA para purgar (Vea "PARA EMPESAR EL @OBIEN EL FRENO" en el capltulo de servicio y TOR" y"PARA PURGAR LATRANSMISION" ajustes de este manual, en Ia secci6n de ta Operaci6n de este manual. 39 Estos simbolos pueden aparecer sobre su tractor o en la literatura proporcionada con e] producto. Aprenda y comprenda sus significados. R N MARCHAATR._S NEUTRO 6 " MOTOR APAGADO SISTEMA H ALTO L 8AJO Ikl ESTRANGU- Ri_,PIDO LENTO LACION MOTOR 45 (.®) N MOTOR FNENO DE ALTURA DE LA LLCVANTAMtENTO ENCENOIDO ENMARCI-IA ESTACEONAM_ENTOSEGADORA DE LA SEGADORA FUNG{QNAMIENTO ATRAS (ROB) LUCES ENSENDIDAS COM81JSTIBLE ACCESORIODEL EMBRAGUE ENGANCHADO BATERIA MARCHA ATRA8 MARCHA HAC|A ADELANT I:: PALANCA DE MANOO CRUCERO PEDAL DE FRENO/ DE EMBRAGUE ACCESORIODEL PELIGRO,GUARDELAS EMBRAGUE MANOSY LOS PiESL_JOS MANTENGAEL PELIGROSDE DESENGANCHADO AREA DESPEJADA PEN'DIENTES (Vea laseCC_6n de laS regtas de seguridad) PELIGRO ;ndica an peligro que, si no se evita, provoca muerte o lesiones graves. ADVERTENCIA unopeligro que,graves. si no se evita, puede provocar indica muerte lesiones RUEDA LIBRE ($olamente p_ra los modelos automati;o) & PRECAUCION indica un peligro que, si no se evita, puede provocar {esiones ligeras o moderadas. PRECAUCION cuando se utiliza sin el simbolo de aviso, indica una situaci6n que puode provocar da6os al tractor y/o aI motor. SUPERFICIES CALIENTE8 indica un peligro que, No seguir las siguientes insttucciones _1_ si no se evita, puede provocar la muerte_ [esiones puede provocar heridas o muerte. Los ,_,_,,..---= graves y/o danos a la maquina, simbolos de aviso de seguridadse utilizan para identificar ir_formacionesde segur_dad /._. FUEGO indica un peligro que, si no se evita, puede relativas a peligros que puedenprovocar ta provocar la muerte, lesiones graves yto danos muerte, heridas graves y/o daSos a Ia a la mdquina. m&quina. 4O FAMILIARICESE CON SU TRACTOR LEA ESTE MANUAL DELY LAS REGLAS DE SEGURtDAD ANTES DE OPERAR SU TRACTOR Compare las ilustraciones con su tractor para familiarizarse con las ubicaciones de los diversos controles y ajustes. Guards este manual para referencia en et futuro. Nuestros tractores cumplen conios est&ndares de seguridad del American National Standard institute. (A) PALANCA DEL LEVANTAMIENTO DEL ACCESORIO - Se usa para ievantar, bajar y ajustar el conjunto segador o los dem&s accesorios montados en su tractor, (G) SISTEMA DE FUNCIONAM|ENTO HACIA ATRAS (ROS) EN POSICI6N "ON" -Permite ta operaci6n det conjuntosegador o otto accesorio acoionado mientras queen rev_s. (B) PEDAL DEL FRENO- Se usa para frenar el tractor y para hacer arrancar el motor, (H) |NTERRUPTOR DE LA LUZ - Enciends y apaga las luces delanteras. =(C).PALANCA DEL FRENO DE ESTACIONA(J) PALANCA DE MANDO CRUCERO- Se utiliza MIENTO L_segu?a =eI=]_edaldelembraguej'freno _ para _tjarel movimiento hacia adelante del tractor .......... en la posiciSn det freno. a la velocidad deseada sin apretar el pedal de marcha atr&s. (D) CONTROL DE ACELERAC|6NJESTRANGULAQION - Se usa para hacer arrancar y (K) PEDAL DE MARCHA ADELANTE - Se utiliza controlar la velocidad del motor. para el movimiento de1tractor hacia adelante. (L) PEDAL DE MARCHA ATRAS - Se utiliza para el movimiento del tractor hacia atr&s. (E) PALANCA DEL EMBRAGUE DEL ACCESOR|O - Se usa para enganchar las cuchiltas segadoras, o los dsmds accesorios montados en su tractor. (M) CONTROL DE RUEDA LIBRE - Desengancha la trans-misi6n para empujar o arrastrar. (F) INTERRUPTOR DE IGNIOION - Se usa para hacer arrancar o hacer parar el motor. 41 i llll lr _ ll_ _,,una ii La operactbn de cualquier tractor puede hacer que satten objet0s extra_os lj dentro de sus ojos, Io que puede producir da_os graves en _stos, Siempre use anteojos de seguridad o protecciones para los ojos mientras opere su tractor o cuando haga ajustes o reparaciones. Recomendamos gafas de seguridad o mdscara de visi6n amplia de seguddad usada sobre las gafas, • Gire la Itave de ignici6n (F) a Ia posici6n de apagado "STOP" y remueva la Ilave al abandonar eltractor para evitar el uso no autorizado, IMPORTANTE: Dejando el interruptor de ]a ignici6n en cualquier posici6n otra que "STOP" causar i que la bateda se descargue (muerta). AMISO: Bajo ciertas condiciones, cuando el tractor est& parado con el motor andando en vac_o, los gases de escape del motor caliente pueden hacer que el c@sped se ponga "caf_." Para eliminar esta posibilidad, siempre pare el motor cuando pare el tractor en &reas con c@sped. COMO USAR SU TRACTOR PARA AJUSTAR EL FRENO DE ESTACIONAMIENTO Su tractor viene equipado con un interruptor sensor que exige la presencia del operador. Cuando el motor est&funcionando, si el operador trata de bajarse del as[ento sin primero aplicar el freno de estacionamiento, se apagar& el motor. 1, Presione el pedal delfreno (B) completamente y sostenga]o, 2, Jale hacia arriba La palanca del freno de mano (C) y mant_ngala en esa posici6n; suelte graduatmente el pedal det freno (B), y luego suelte Ia palanca deI freno de mano. Aseg_rese que el freno de estacionamiento va a sujetar el tractor en forma segura, _,PR ECAUCI6N: Siempre pare el tractor completamente, segt3n se ha descrito anteriormente, antes de abandonar la posici6n del operador. PARA USAR EL CONTROL DE LA ACELERACION (D) Siempre opere el motor a una aceleraci6n compIeta, - Si el motor funciona a una vetocidad inferior a la m_xima (r&pida), su rendimiento disminuye. • EI rendimiento 6ptimo se obtiene a lavelocidad m&xima {r_.pida). PARADA CUCHILLAS DE LA SEGADORA ° Mueva la control del embrague deI accesorio a la posici6n desenganchado (t_), MOVERSE HACIA ADELANTE Y HACIA ATRAS La direcci6n y la vetocidad de movimientos est&n controlados pot tos pedales de marcha adelante y atr&s. 1. Poner en marcha el tractor y quitar el freno ...... (r_3)"Engarrchado .......... (f_) "Oesenganchado ........................ de manor-.................................. -'_" (Engaged) (Disengaged) 2. Apretarlentamenteelpedalmarchaadelante {K) y atr&s (L) para iniciarel movimiento, M&s IMPULSION DE RECORRIDO se aprieta el pedal y mayor es la velocidad, • Para parar el mecanismo impulsor, presione eI pedal del freno compietamente, IMPORTANTE: Los pedaies de marcha adelante y atr&s vuelven a la posioi6n neutra cuando no est&n apretados. MOTOR - Mover la palanca (D) de mando entre ta posiciSn de velocidad media y m_ma (r&pida). AVISO:Si no se mueve la palanca de mando entre la posici6n de velocidad media y m#,xima (r&pida), antes de pararse, se puede causar un "retomo de llama" del motor, UTILIZAR EL MANDO CRUGERO El mando crucero se puede utilizar s61odurante ]a marcha hacia adelante. 42 CARACTERiSTIOAS TE_CNIOAS AVISO: Ajuste las ruedas calibradoras con el Elcontrol develocidad crucero s61o debe usarsetractor en una superficie nivelada plana. mientras eltractor est4_ enlabores desiega o 1. Ajuste Ia segadora a la altura de corte decon Ia manilta de ajuste de altura (Vea transportacJ6n, movJ#ndose sobre super_cies que seada "PARA AJUSTAR LA ALTURA DE CORTE DE est6n relativamente planas y rectas. Otras condiciones de trabafo, come la poda, que requiere velocidades bajas, podrlan desengranar el control de velocidad crucero. No emplee el control de velocidad crucero mientra8 eftractor se desplaza per elevaciones, terrenos escarpados o mientras el tractor est6 en labores de poda o virando. • Con el pedal (K)de marcha adelante apretado a la velocidad deseada, mover la palanca de mando de crucero hacia adelante hasta la posici6n "SET' y mantenerla mientras se levanta el pie def pedal, luego soltar la palanca (J) de mando de crucero. Para desconectar el mando de crucero, e pujar la palanca hacia atr&s en la posici6n "OFF", o apretar comptetamente et pedal del freno. 2. 3. LA SEGADOR_:' en fa secci6n de Operaci6n de este manual). Con la segadora a la aftura deseada para la posici6n de corte, se tienen que montar las ruedas calibradoras de mode que queden un poco sobre el suelo. Instale Ias ruedas calibradoras en el agujero adecuado con el perno con resatto, la arandela de 3/8, y Ia tuerca de seguridad de 3/8-16 y apri6telos en forma segura, Repita el procedimiento para el Iado opuesto instalando ia rueda calibradora en el mismo agujero de ajuste. PARA AJUSTAR LA ALTURA DE CORTE DiE LA SEGADORA La posici6nde la palanca elevadora (A) determina a qua' altura se cortar&el c_sped. • Coloque Ia palanca etevadora en la ranura de la altura deseada. La gama de ta altura de corte es de aproximadamente 1 a 4 pulgadas. Las alturas se miden desde el suelo a la punta de la cuchilla cuando el motor no est& funcionando. Estas alturas son aprox[madas y pueden variar dependiendo de las condiciones del suelo, de Ia altura del c4_spedy del tipo del c6sped que se est& segando. * _! _,z,_n,d,_romedi:_a,=hecor_rse =r,roxima,_a PARA OPERAR LA SEGADORA Su tractor viene equipada con un interrupter sensor que exige la presencia del operador. Si el motor est& funcionando y el embrague deI accesorio est,. enganchado y el operador trata de bajarse del asiento, se apagar& et motor. Tiene que mantenerse sentado completa y centralmente en el asiento para impedir que el motor vacile o se apague cuando se opere su equipo en terreno disparejo, &spore o en cerros. t. Seleccione la altura de corte deseada. 2. Baje la segadora con et control de levantamiento det accesodo. 3. Haga arrancar las cuchiltas de la segadora enganchando el control del embrague del accesorio. PARA PARAR LAB CUCH1LLAS DE LA SEGADORA - desenganche el control del embrague mente a 2-1/2 pulgadas durante Iatemporada _'____ " o . 4BkPH_'uAUCION opere Ia segaaora sin ,. ........................ frla.y.sobre_.3pu!gadas durante los meses . _"' No ..... ya sea. _el "recogeaor de en calurosos. Para obtener-U-11-6_sped'm_iS salu: ........ , _ cespea "comptezo . . las ........ dable y de meier apafiencia, siegue a menudo segadoras as_ equtpaaas o con la pro[ecc[on y despu4_sde un crecimiento moderado, contra la descarga (S) en su lugar. • Para obtener el meier rendimiento de code, el c_sped que tiene robs de 6 pulgadas de altura debe segarse dos veces. Haga eI primercorte relativamente alto; el segundo a Ia altura deseada. PARA AJUSTAR LAS RUEDAS CALIBRADORAS Las ruedas calibradoras est&n bien ajustadas cuando se encuentran un poco a distancia del terreno al mismo tiempo que la segadora est_ a la altura de corte dese_,da. EntoncesIas ruedas calibradoras mantienen el conjunto segador en posici6n para prevenir el corte raspeo en casi todos los terrenos. 43 FUNCIONAMIENTO ATR/_,S Tu tractor est& equipado con el Sistema de Funoionamiento Atr&s (ROS). Cualquier tentativa deI operador de viajar marcha atr_.scon el embrague puesto apagar& el motor a menos que la liave de ignici6nse ponga en la posici6n de "ON" del ROS. ATENClON: Ir marcha atr_s con el embrague puesto para cortar, no es recomendable. Poniendo el ROSen posici6n "ON", para permiUr el funcionamiento atr&s con el embrague puesto, se tiene que hacer s6Jocuando el operador lo considera necesario para reposicionar la m&quina con e! dispositivo embragado. No siegue en rev_s a menos que sea absotutamente necesario. USAR EL SISTEMA DE FUNCIONAMIENTO ATRAS Utilioe el tractor sotamente si est& seguro de que no ingresar_n nifios ni otras personas o animales al #.rea donde se va a cortar el c@sped. t. Presionar el pedal freno hasta el fondo. 2. Con el motor en marcha, girar Ia Ilave deI interruptor de la ignici6n en el sentido inverso al de las agujas deI reloj hasta la posici6n "ON". 3 Mire hacia abajo y hacia atr_s no s6Io antes de ir marcha atr_.s,sino mientras est_ yendo marcha atr_.s. 4. Presione Ientamente el pedal reverso de la Jmpulsi6n para comenzar el movimiento. 5, Cuando el uso del ROS es m&s necesario, d6 vuelta a la Ilave de ignicibn en el sentido de las agujas deI reloj hasta la posici6n "ON". Posici6n ROS "ON" Motor en posiciSn "ON" PARA OPERAR EN CERROS _ILADVERTENCIA: No maneje hacia arriba o hacia abajo en cerros con pendientes superiores a 15° y nomaneje atravesando ninguna pendiente. Utilice la gula de Ia pendiente proporcionada en Ia parte posteriora de este manual. • Escoja Ia velocidad m&s lenta antes de arran• Evite parar o cambiar la velocidad en cerros. • Si esabsolutamente necesario ef parar,empuje el pedal de freno r&pidamente a la posici6n de freno y enganche el freno de estacionamiento, • Para volver a empezar con el movimiento, suelte lentamente, el freno de estacionamiento y el pedal de freno. • Apretar despacio el pedal apropiado hasta la posici6n m&s lent& • Gire siempre lentamente. 44 PARA TRANSPORTAR Cuando empuje o arrastre su tractor aseg_rese de desenganchar la transmisi6n poniendo el control de ta rueda libre en la posiciOn de marcha de rueda libre. El control de marcha de rueda libre esta situado en la barra de tracci6n trasera deI tractor. 1. Levante la palanca de tevantamiento det accesorio a la posiciOn m_.s alta con el control de Ievantamiento deI accesorio. 2. Tire del mando de la rueda libre hacia afuera y hacia abajo hasta que se coloque en laguia y sueltalo de manera que se mantenga en la posici6n de desenganchada, • No empuje o arrastre el tractor a m&s de dos (2) MPH. . Para volver a accionar la transmisi6n, invierta este procedimiento. Transmisi6n Enganchada Transmisi6a Desenganchada AVISO: Para proteger el cap6 contra el daSo cuando transporte su tractor en un cami6n o remo_cador, aseg0rese que el cap5 est6 cerrado y asegurado al tractor. Use los medios apropiados para amarrar el cap6 at tractor (cuerdas, cordeles, etc.). REMOLQUE DE CARRETILLAS O OTROS ACCESORIOS Remolque solamente los accesorios recomendados y especificados pot el fabricante del tractor. Use sentido comfin cuado este remolcando. Las cargas pesadas, cuando este yendo sobre una pendiente, son peligrosas, las Ilantas pueden perder su tracci6n con el terreno y pueden ocas]onar que pierda el control de su tractor. ANTES DE HAOER MOTOR ARRANOAR EL El motor en su tractor ha sido enviado desde la f&brica !Ieno con aceite de calidad para verano. 1. Revise el aceite deI motor con el tractor en terreno nivelado. 2, Remueva la tapajvarilta indicadora de nivelde relleno del aceite y Iimpielas, vuelva a insertar la vadlla indJcadora de nivel y atorni]le latape hasta que quede apretada, espere por unos cuantos segundos, remu@vala y lea el niveI det aceite. Si es necesario, agregue aceite hasta que se haya alcanzado la marca lleno (FULL) en la varilla indicadorade nivel. No Io Ilene demasiado. • Para la operacion en clima frio, debe cambiar el aceite para poder arrancar rn&s f&cilmente (Vea "Tabla de Viscosidad Del Aceite" en ta secci6n de Mantenimento de este manual). • Para cambiar eI aceite del motor, vea ta secci6n de Mantenimento en este manual. AGREGUE GASOLINA • Llene el estanque de combustible. Llene hasta Ia porte inferior del cuello de relleno del estanque de gasolina, No Io tlene demasiado. Use gasolina regular, sin plomo, nueva y lirnpia con el minimo de 87 octanos. (El uso de gasolina con plorno aumentar& los dep6sitos de 6xido de p!omo y carbono y se reducirA la duraci6n de la v&Ivula). No mezcle el aceite con la gasolina. Paraasegurar que [agasolina utilizada sea fresca compre estanques los cuales puedan ser utilizados durante los pdmeros 30 dias. _PRECAUCI6N: Limpie el aceite o el combustible derramado. No alrnacene, derrame o use gasolina cerca de una llama expuesta. |MPORTANTE: Cuando se opere en ternperaturas por debajo de 32°F (0°C) use gasolina de invierno limpia y nueva para auedar a asegurar un buen arranque en clima frio. PRECAUCION: Combustibles mezclados con alcohol (conocidos como gasohol, o el uso de etanol o metanol) pueden atraer Ia humedad, la que conduce a ia separaci6n y formacibn de &cfdos durante el almacenamiento. La gasolina acidica puede daSar el sistema del combustible de un motor durante el alrnacenamiento. Para evitar los problemas con el motor, se debe vaciar el sistema de combustible antes de guardarlo pot un per|odo de 30 di'as o re&s. Vac_e el estanque de combustible, haga arrancar el motor y h&galo funcionar hasta que las lineas del combustible y el carburador queden vacios. La pr6ximaternporada use combustible nuevo. Vea los tnstrucciones para el Atmacenamiento para m&s informaci6n. Nunca use productos de timpieza para el motor o para el carburador en el estanque de1combustible pues se pueden producir dodos permanentes. 5. lnserte ia tlave en Ia ignicibn y gire la tlave en et sentido que giran Ias maniUas del reloj a Ia posici6n de arranque start, y suelte Ia Ilave tan pronto como arranque el motor. No haga funcionar el arrancador continuamente por m&s de quince segundos por minuto. Si el motor no arranca despu6s de varios intentarlos, mueva el control de Ia aceleraci6n a Ia posici6n de r&pido, espere unos cuantos minutos y trate de nuevo. Si el motor sigue sin funcionar, mueva el control de la aceteraci6n a Ia posici6n de estrangulaci6n y intente de nuevo, ARRANQUE CON TEMPO TEMPLADO (50°F/10°0 Y MAS) 6. Cuando arranque el motor, rnueva el control de ia aceleraci6n a la posici6n de r&pido. * Los accesorios y el embrague ahora pueden ser utilizados. Si el motor no acepta esta cargo, vuelva a arrancar el motor para permitirle que se caiiente por un minuto utilizando el estrangulador come desoribido arriba. ARRANQUE CON TIEMPO FR{O (50°F/10°C Y MENOS) 6. At hater arrancar el motor, rnantenga el control de ta aceleraci6n a la posicibnde es_ trangulaci6n basra que el motor se caliente y empiezefuncionar mat. Unavezque empieze a funcionar rnal, mueva inrnediatamente el control de Ia aceleraci6n a Ia posici6n r&pida. El calentamiento deI motor puede tomara partir de varies segundos a varios minutos (cuanto rn&sfria es latemperatura, m&s largo es el calentarniento). CALENTAMIENTO PARA LA TRANSMISION AUTOMATICA Antes de conducir la unidad en un tiempo fr{o, la transmisiOn debe ser calentada como las instrucciones siguientes: 1. AsegOrese que el tractor este situado en una superficie nivelada. 2. Aiivie el freno de estacionamiento y deje que el freno vuelva a ta posioi6nde operaci6n. 3. Permita que Ia transmisi6n se caliente durante un minuto. Esto puede set echo durante el PARA HACER ARRANCAR EL MOTOR At hacer arrancar el motor por la primera vez o tiempo de calentamiento del motor. • h_ _cabado .el .,o.,.bust_bIe n m • a too,or..... t _ • Losaccesoriospuedenserutilizadosduranfeet stse ...... _el necesitar& tiernpo para el ar_'anqueext_'a para .........penodo det recalentarnlento det motor despu_s ............. que la transmisibn halla sido calentada. mover el combustible desde el estanque hasta AVISO: Si se encuentra a mucha altura (sobre et motor. I, Aseg_rese que el control de rueda libre es_e 3000 pies) o en clima frio (por debajo de 32°F [0°C]), la mezcta del combustible del carburador en la posici6n enganchada. debe set ajustada para el mejor rendimiento 2. Si6ntase en el sill6n en la posici6nde operdel motor. (Vea "PARA AJUSTAR EL CARBUaci6n, sueIte e[ pedal det freno y ponga el RADOR" en [a secci6n de Servicio y Ajustes de freno de estacionamiento. este manual). 3. Mueva el embrague det accesorio a la posici6n desenganchado disengaged. 4. Mueva Ia palanca de controlde la aceleraci6n a la posici6n de estrangulaci6n. AVISO: Antes de arrancar, lea las instrucciones siguientes para ef arranque en clima frio y templado. 45 PURGAR LA TRANSMISION _PRECAUCI6N: Nunca enganche o desenganche Ia palanca del control de rueda libre cuando el motor esta funcionando. Para asegurar la operaci6n y ejecuci6n adecuada, es recomendado que la transmisi6n sea purgada antes de operar el tractor para la primera vez. Este proceso remover& cualquier aire adentro de ta transmisibn que se halla formado durante e! transporte de su tractor. IMPORTANTE: Si por acaso su transmisi6n debe ser removida para servJcio o reemplazo, debe set purgada despu@s de Ia reinstalaci6n y antes de operar el tractor. 1. Para mayor seguridad, ubique el tractor en una superficie nivelada, despejada de cualquier objeto y abierta, con el motor apagado y el freno de mano puesto. 2. Desenganche Ia transmisi6n poniendo el control de rueda libre en la posici6n de desenganchado (Vea "PARA ELTRANSPORTE" en esta secci6n de este manuaD. 3. Sentado en el asiento del tractor, empiece el motor. DespuL=sque este corriendo el motor, mueva el control de estrangulaci6n a la posici6nde lento. Quitar el freno de mano. CONSEJOS PARA SEGAR • No se pueden usar lascadenas para las llantas cuando la caja de la segadora est_ adjunta al tractor. • La segadora debe estar nivelada en forma adecuada para obtener el mejor rendimiento al segar. Vea "PARA NIVELAR LA CAJA DE LA SEGADOR,_' en la secci6n de Servicio y Ajustes de este manual. • El Iado izquierdo de Ia segadora se debe usar para recorte. • Manejede modoque los recortes se descarguen en el &tea que ya ha sido cortada. Mantenga el &rea de corte a Ia derecha del tractor. Esto producir_,una distribuci6n m,_s pareja de los recortes y un corte m&s uniforme. AI segar Ias &rea grandes, empiece girando a Ia derecha de modo que los recortes se descarguen, alej&ndose de los arbustos, cercos, entradas de autom6viles, etc. Despu_s de una o dos vueltas, siegue en la direcoi6n opuesta, haciendo virajes a Ia izquierda, hasta que termine. _PRECAUCI6N: En el transcurso del paso 4, puede que de pronto se pongan en movimiento las ruedas. 4. Apretar el pedal de marcha adelante hasta el rondo, mantener por cinco (5) segundos y soltar el pedal. Apretar el pedal de marcha atr&s hasta el fondo, mantener pot cinco (5) segundos y soltar el pedal. Repetir el procedimiento tres (3) veces. 5. Apague el motor y embrague el freno de estacionamiento. £/0272 • Si el cesped est& demasiado alto, se debe segar dos veces para reducir la carga y los posibles peligros de incendio debido a los recortes secos. Haga el primer corte relativamente alto; el segundo a la altura deseada. • No siegue el c6sped cuando est& mojado. El c_sped mojado taponar_, la segadora y dejar& 6. Enganche la transmisi6n poniendo el control montones indeseables. Permita que se seque de rueda libre en la posici6n de conducir (Vea el c6sped antes de segarlo. "PARA TRANSPORTAR" en esta secci6n del • Siempre opereel motorcon una aceleracibn manual). completa cuando siegue para asegurarse 7. Sentado en el asiento del tractor, empiece el de conseguir un mejor rendimiento y una motor. Deepu@sque este corriendo el motor, descarga apropiada de los materiales. Regule mueva el control de estrangulaci6n media la velocidad de recorrido seleccionando un (I/2) velocidad. Quitar el freno de mano cambio Io suficientemente bajo para obtener un 8. -.Conduzca su.tractor.hacia adelante durante ..........rendimiento de corte de parte de su segadora ......... aproximadamente cinco pies y entonces hay tambi@n la calidad del corte deseada. cia marcha atr&s cinco pies (I 50 cm). Repita • Cuando opere con accesorios, seleccione una este proceso tres (3) veces, velocidad de recorrido que se acomode a] terSu transmisi6n esta ahora purgado y dispuesto reno y le permita obtener el mejor rendimiento para _aoperaci6n normal, deI accesorio que se est& usando. 46 PRO'GRAMADE ..........._r_s_ MANTENIMIENTO Revis_r la opera;i6n _eI Imno R d'oo_,l_l!e If _,_6.... sislen_ d ROS . Umpie t_3 HOP_ CA_ TEMPORAD.= ALMt,CE_L_I£NTCJ , , w I el o_ftiamianto k_ <_AOA CA_A HOF_S50 I_ Revisar _1 ._el R Li_,p_,_._o_,r_i._= R_is_ 25 HORA_ Vt ......................................... ,o,,,,°,,oo0,o,, ..... IT 0 CA_ HQSRAS if l_B_isar _ pre_n d_I_sI_ntas T w,i_ h.._o ''''CAD,' CADA U_O mslduos de ,, . V' dal t_rtsoj_ la pl;_¢a V # d_ d_e_ci_t_ .... _ ...... lnspar;ck_nelas correa$ #apez_ida_s FLm_isar e_ eJvel ctel aceit_ °el molor Camb]_l a T 0 a el _¢_]Is del motor CamL_i,_" Limpi_r el acei_e la r_illa d_!,,_oz" €_I si_e r_]adot! amorlig_a0or _e r:h[$pas el fillm Li_pJ_r _as oI_ias _ re,, (sin V#_,_ _e,_,¢_ite V _1#12 v' .............................. (€i eQuipa_o) ................. de e_f_en_g V_. 2 (l_ 2 c._..,...i,. !/ _m_i_r el _tl_cho _ C_mbi_r _I lillr0 _ _llro) do ai_ I_spe_;_r,_t Cambiar V (c,_ _ fillto) c_ pa_l de1Iiltm _ a_r_ de comb_$1_ble I/ _l_ TABLA DE LUBRICACION RECOMENDACIONES GENERALES La garantta de este tractor no cubre los articulos que han estado sujetos al abuso o a la neg_)Perno axticulado delvolam Iigencia del operador. Para recibir todo el valor de I_ garantia, el operador tiene que mantener Accesorio de Grasa del Arbol lasegadora seg0n tas instrucciones descritas Grasa(telArbol en este manual, Hay algunos ajustes que se tienen que hacer de Grasadel en forma peri6dica para poder mantener su Rodamientode de Gras_ del tractor adecuadamente, laRueda Rodam_ento AI menos una vez cada estaci6n comprobar Delantem de la FIueda si as necesario efectuar losadjustes descritos ,,,_ . De]antera .en as secc ones. de ............................... Servio O y Ajustes de este _e, e P_',_a; a''^^" ..... _ g nale ..... "="_=" de,Sectorde • Unavez al afro, cambie la bujia, [impie o Direcci6n eambie el filtro de aire y revise si [as cuchillas y las correas est&n desgastadas. Una bujia nueva y un filtro de aire limpio aseguran (_ Grasa de proposito generai una mezcla de aire-combustible adecuada y _) Refi_rase a la secci6n del "MOTOR" en le ayudan a que su motor funcione mejor y Mantenimiento que dure m&s. ANTES DE CADA USO IMPORTANTE: No aceite o engrase los puntos 1. Revise el nivel del aceite del motor. pivotes, los que tienen rodamientos de nil6n 2, Revise Ia operaci6n de los frenos. especiales, Los lubricantes viscosos atraer&n 3, Revise Ia presi6n de las tlantas, polvo y mugre, Io que acortara ta duraci6n de 4. Verifique que el sistema de presencia del los rodamientos, Si cree que lubriearse, use operado y ROS funcionen adecuatamente. sotamente un lubricante tipo grafito de polvoseco 5. Revise si hay sujetadores sueltos. en forma moderada. 47 TRACTOR Siempre observe las regtas de seguridadcuando d_ mantenimiento. OPERACION DEL FRENO • Cuando el motor est& en marcha con el interruptor de ttave det sistema de funcionamiento atr,_s (ROS) en la posici6n "ON" y el embrague del accesorio conectado, cuatquier tentativa del operador de viajar mareha atr_s, NO apagar& el motor. Si el tractor necesita m&s de cinco (5) pies para detenerse a la m&xima velocidad al cambio m&s alto en una superficie nivelada, de hormig6n o _avimentada, hayque hacerle eI servicio a! freno. r "PARA VERIFICAR SI FUNCIONA BIEN EL FRENO" en el capitulo de Servicio y ajustes de este manual. Para obtener resultados 6ptimos, ias cuchillas de Ia cortadora deben estar afiladas. Reemplace tas cuchillas que est_n gastadas, dobladas o daSadas. LLANTAS REMOCION DE LA CUCHILLA • Mantenga todos los neum&ticos con la presi6n de aJreadecuada (Ver la PSi que se indica en estos). - Mantenga Ias Ilantas sin gasolina, aceite o substancias quimieas para control de insectos que pueden da5ar Ia goma. • Evite los tocones, las piedras, las grietas profundas, los objetos afilados y otros peligros que pueden dar_ar alas tlantas. AVISO: Para arreglar las Uantas perforadas y p_ra prevenir clue tenga Ilantas pinchadas a causa de pequenas fugas, puede comprar el selIo para llantas de su comerciante de partes de repuesto m&s cercano. EIsello previene que las llantas se sequen y tambi_n la corrosi6n. 1. SISTEMA PRESENCIA OPERADOR Y SISTEMA FUNCIONAMIENTO ATRAS (ROS) Asegurarse de que el sistema de presencia del operador y el sistema funcionamiento atr&s funeionen blen. Si tu tractor no funcidn como descrito, reparar el problema inmediatamente. • Et motor no arrancar_, si el pedal de embragueifreno est& completamente presionado y el mando de1 embrague del accesorio esta desconectado: V_=RIFI _7 SISTEMAPRESENCIAOPERADOR CUlDADO DE LA CUCHILLA Levante la segadora a su posici6n m_s atta para permitir el acceso alas cuchitlas. AVISO: Proteja sus manos con guantes y/o envuelva Ia cuchilla con una tela gruesa. 2. Remueva el perno de la cuchilla dandole vueltas en el sentido inverso aI de las agujas deI reloj. 3. lnstale ta nueva cuchilla con el estampado "THIS SIDE UP" en la direccion de la segadora y del conjunto del mandril. 1MPORTANTE: Para asegurar la instalacion apropiada, posicione el agujero central de lacuchiIla con la estrella del conjunto del mandril. 4. Instale y apriete et perno de la cochiUa firmemente (Par 45-55 pJes_ibras). tMPORTANTE: El perno especial de la cuchilla es termotratado. Cuchilla _/_:_.. f._ Agujero "_...__._ L t / ¥1 Gonjun.tode1 Mandril Central _stretta Pemo_ • Cuando el motor estgt en marcha, cualquier tentativa deI operador de abandonar el asiento sin haber puesto ef freno de estacionamiento primero, apagar_ el motor. , Ouando el motor est& en rnarcha y el embrague del accesorio est,. conectado ' ¢ua[quier ...... tentativa del operador de abandonar et asiento apaga..r&e mo'_Qr_ ........ ' BATERiA Su tractor cuenta con un sistema de carga de la bateria que es suficiente para el uso normal. Sin embargo, si se carga la baterla ped6dicamente, con un cargador de automSvites, se prolongar& _H ¢Jllr-_l,_lVl _;'_'_ i, , .. ....... Mantenga ta omeria y los terminales limpios. , ....... nar nunca si el operador no est_ en su asiento. VI_RIFIEZSISTEMA FLINCIONAMIENTOATRAS(ROS) . Cuando el motor est,. en marcha con el interruptorde llave en posici6n de motor "ON" y el embrague del accesorio conectado, cualquier tentativa del operador de viajar marcha atr&s, apagar& e! motor. • Mantenga los agujeros de ventilaciSn pequefios abiertos. • Vuelva a cargar de 6-10 amperes por I hora. AMISO: La bateria del equipo original de su tractor no becesita servicio. No intente abrir o remover las tapas o cubiertas. No esnecesario afiadir o verificar el nivel del electr61ito. PARA Posici6n ROS "ON" LIMPIAR LA BATERiA Y LOS TERMINALES La corrosi6n y la mugre de Ia bateria y de los terminales pueden producir 'escapes" de potencia en ta bateria, 1. Remueva la protecci6n de los terminales. 2. Desconecte el cable de ta bateria NEGRO primero y luego el cable de la baterla ROJO y remueva la bateria del tractor. Motor en posici6n "ON" 48 PAPA CAMBIAR EL ACEITE DEL MOTOR Determine la gama de Ia temperatura esperada antes de cambiar el aceite. Todo el aceite debe cumptir con laclasificaci6n de servioio AP! SG-S L. 3. Enjuague la bater{a con agua corriente y sequela. 4. LirnnpieLosterrninales y los extremos del cable de la bateria con un cepil[o de atambre hasta que queden brillantes. 5. Cubra los terminales con grasa o parafina. 6. Reinst_[e la bateria (Vea "Reemplazar Ia Bateria" en la secci6n de Servicio y ajustes de este manual). ENFRIAMIENTO DEL TRANSEJE Las aletas de enfriamiento y el ventilador de Ia transmisi6n tienen que mantenerse limpiospara asegurar el enfriamiento adecuado. No trate de timpiar eI ventilador o la transmisi6n cuando el motor est@funcionando o mientras Ia transmisi6n estL• caliente. • Inspeecione el ventilador de enfriarniento para asegurarse que Ins aspas del ventilador esten intactas y limpias. • Inspeccione tas aletas de enfriamiento para verificar si hay mugre, recortes de c_sped u otros materiales. Para impedir dafios a Ins juntas, no use un rociador de aire compresado o de alta presi6n para IJmpiar Ins aletas de enfdamiento NIVEL DEL FLUtDO TRANSEJE Asegl_rese que eltractor est@en unasuperficie nivelada. • El aceite se drenar& rn&s f&cilmente cuando est6 caliente. , Recoja el ace_te en un envase adecuado. 1. Remueva ia tapaJvarilla indicadora de nivet para relieno del aceite. Tenga cuidado de no permitirque ta mugre entre en el motor cuando cambie el aceite. 2. Quite el casquillo amarillo de la parte inferior de ta v&Ivula de desag0e e instale el tubo de desagLie sobre fa guarnici6n. v&tvulade desag_edel aceite Posici6rl DE LA BOMBA DEL __Tubo de CasquilIo E1 transeje ha side seUado en fa f&brica y el mantenimiento deI fluido no es necesario para la vida del transeje. En el caso de que el transeje se filtrase o necesitase servicio, haga el favor de ponerse en contacto con un centre de servicio Sears o con un otro centro de servicio cualificado. 3. 4. 5. CORREAS V Revise Ins correas V para verificar si existe deterioro y desgaste despu@s de 100 horas de operaci6n y c&mbielas si es necesario. L3s corteas no son ajustables. Cambie las correas si empiezan a deslizarse debido a! desgaste. MOTOR LUBRICACION Use solamente aceite de detergente de atta calidad clasificado con la clasfficaci6n SG-SL de ..servicio APLSeteccione la._;a!<!adde viscosidad de! ace_te SAE seg n su tempera urn d op racton esperada. CALIDAO ESD_VISCOSIDAD DESAE 6. 7. 8. ..... Cambie et aceite despu_s de 50 horas de operaci6n o pot 1ornenos una vez al afio si el tractor se utiliza menos 50 horns el ado. Revise el nivel deLaceite deI c&rter antes de arrancar el motor y despu@sde cada ocho (8) horns de uso continuado. 49 Abra la vb,ivula de desag_e empujando hacia dentro y dando vue!ta a la izquierda. Para abrirse, tire hacia fuera la v&Ivu[a de desagQe. Despu6s de que el aceite haya drenado totalmente, cerrarybloquee lav_lvulade desag0e empujando hacia dentro y dando vuefta en sentido de las agujas de un reloj hasta que Ia clavija est& en la posici6n bloqueada segSn Io mostrado. Rernueva el tubo de desagLie y substituya el casquillo sobre la guarniciSn inferior de la v_.Ivula de desagL_e. Vuelva a Ilenar el motor con aceite a trav@s del tubo de Ia varilla indicadorade niveI para retleno del aceite. Vacielo lentamente. No Lo llene dernasiado. Para Ia capacidad aproximadavea as"Esoec f caciones dei Producto" secci6n de este manu_.i ...................................................... Use un reed(dot en Ia tapaivariUa indicadora del hive[ para retleno de1aceite para revisar el niveL Para la [ectura exacta, [nserte la variIIa indicadora de nivel en el tubo y ernp_jela hacia abajo firmemente en su sitio antes de quitarla. Mantenga el aceite hasta, pero no encima, de tamarcade []eno"FULE de tavaritla indicadora de niveL Empuje la varilta hacia abajo firmemente en el tubo cuando termine. FILTRO DE ACEITE DEL MOTOR Cambie el filtro de aceite del motor cada temporada ovez por med[o que cambie e! acelte, si el tractor se usa rn&s de t 00 horas en un aSo. LIMPIEZA DE LA REJILLA DE AIRE La rejilla de aire debe mantenerse sin mugre y paja para evitar el daSo aI motor debido al sobrecalentamiento. Limpiela con un cepil[o de alambre o con aire compdmido para remover la mugre y las fibras de goma secas, pegadas. FILTRO DE AIRE Su motor no va a funcionar en forma adecuada si usa un filtro sucio. Inspeccione el cartucho de papel cadados meses o despuL=sde 25 horas de operaciSn, el cu&t suceda primero. D_'Ie servicio al filtro de aire rods a menudo si se usa en condiciones polvorosas. Reemplace el cartucho de papeI cada aSo, o despu_s de carla 100 horas de operaciSn. PARA DAR 8ERVtCIO AL CARTUCHO • Cambie un cartucho que est_ sucio, doblado o dafado. Maneje el carbJchO nuevo cuidadosamente; no to utilice si el selIo de goma esta daSado AVISO: No lave el cartucho de papel o use aire a presi6n, pues esto daSard el cartucho. 1. Suelte el botSn y remueva {a cubierta. 2. Remueva el cartucho. 3. 4. 5. 6. Golpee ligeramente el lade plisado del cartucho para desprender la suciedad. Limpie todos los elementos de! filtro de aire de cualquier acumulaciSn de matefia o suciedad. Evite que cualquier suciedad entre en el carburador. lnstale el cartucho limpiado o nuevo con el lade p]isado "fuera" y asiente el sello de goma sobre los berries de la base de] filtro de airs. Vuelva a montar la cubierta del filtro de aire y asegSrela al apretar el botSn. i Boron" Cartucho SILENCIADOR Inspeccione y cambie el silenciador corroido y el amortiguador de chispas (si viene equipado) pues pueden crear un peligro de incendioy!o daSos. BUJiA(S) Cambie {as buiia(s ) aI comienzo de cada temporada de siega o despu_s de cada 100 horas de operaci6n, Io que suceda primero. El tipo de bujia y el ajuste de la abertura aparecen en "ESPECIFICACIONES DEL PIRODUCTO" secc{bn de este manual. FILTRO DE COMBUSTIBLE EN LINEA El fiItro de combustible debe cambiarse una vez cada temporada. Si el filtro de combustible se tapona, obstruyendo et flujo del combustible hacia el carburador, es necesado cambiar}o. 1. Con el motor frio, remueva el filtro y tapone las secciones de Ia Itnea de combustible. 2. Ponga el fi]tro de combustible nuevo en su posici6n en la linea de combustib]e con la flecha seSalando hacia el carburador. 3. Aseg0rese de que no hayan fugas en la linea del combustible y que las grapas est_n colocadas en forma adecuada. 4. Inmediatamente Iimpie toda la gasolina tierramada. Abrazadeta combustible _--____.__ ,f_---.-_ Abra.zadera _-r__ LIMPIEZA Limpie todo material extrafto del motor, Ia bater{a, el asiento, el pulido, etc. Limpie los desechos de Ia placa guia. Los deI pedal detfrenoiembrague, io que har_,que patine [a correa y que se pierda la tracci6n. _I_PRECAUCI6N: Evite todos los puntos de enganche y ]as piezaslimitar m6viles. desechos pueden el movimiento del eje PedalDetEEmbraguel/_ _ _>. LIMPIEZA DE LA ENTRADA DE AtRE/AREAS t SUlked°l=___'//_ DEENFRIAMIENTO ................................................................................ ' i_ 1_7_//_ _._ " Para asegurar un enfriamiento adecuado _, : _./_--_.J __ , . ' r_, Haca __>_-_ .... _ I aseg_rese que Ia rejilla del c6sped, Ias aletas de enfriamiento, y otras superficies externas deI D_recci6n__._,,_ __k "t motor se mantengan mpias en todo memento ,_,{,'7 -_,_,_ _ i_-_\ Cada t00 horas de operaci6n (m&s a menudo ./_<J_ _._ J'/_" _ -'-_, bajo condiciones extremadamente polvorosas /_(_/_ =_=_,// 1 o sucias) rernueva ta caja del ventilador y otras ,. _ "_._:_ _'__.___RECAU'C_I6 N: I tapas de 'enfriamiento. Limpie tas aletas de en_'._>-. _._1 _,_ JA :EPUNTOS :_--. ---_-_.-, D_' friamiento y tas superficies externas, seg_[n sea : _ I NGANCHE J necesario. Aseg6rese que se vuelvan a instalar SfSTEMADIEDIRECCt6N,SALPICADERO, las tapas de enfdamiento. GUARDABARROS Y SEGADORA NO MOSTRADO8 AVISO: Si se opera la mdquina con una rejilla , del c_sped bloqueada, sucia, o con las alefas de enfriamiento taponadas, y/o las tapas de enfria• miento remov]das se producir& daSo en el motor debido at calentamiento excesivo. 50 Mantenga Ias superficies pulidasy lasruedas sin derrames de gasolina, aceite, etc. Proteja las superficies pintadas concera ripe automotdz. No recomendamos que se utilice una manguera de jard{n o agua a presi6n para limpiar el tractor a no set que el motor y {a transmisi6n est6n cubiertos para protegerlos del agua. El agua en el motor y Ia transmisi6n acortan ia vida 5til deI tractor. Utilizar aire comprimido o un soplador de hojas para remover hierba, hojas y basura del tractor y cortac(_spedes. PUERTO DE LAVADO DE LA CUBIERTA La cubierta de su tractor est_ equipada con un puerto de Lavado sobre la super_cie que forma parts del sistema de lavado de la cubierta. Se debsria utilizar cada vez que se haya usado el tractor. 1. Lleve el tractor a un [ugar horizontal y despejado de su c6sped, lo bastante cerca de una boca de riego como para que llegue [a manguera del jardln. tMPORTANTE: Aseg_rese de que la boca de descarga del tractor est& orientada LEJOS de su oasa, garaje, coches aparcados, ete, Quite la boca de ensacado o cubierta de mantillo si est_ acoplada. 2. 3. 4. Mueva el control deLembrague del accesorio a fa posici6n"DESENGANCHADO", ponga el treno de estacionamiento y apague el motor. Enrosque el adaptador de la boquilla (empaquetado con el manual deI operador deI tractor) en el extremo de ta manguera del jardin. Echo hacia atr&s la abrazadera de cierre del adaptador de la boquiUa y empuje (_steen el puerto de Iavado de Ia cubierta en el extremo izquierdode lacubierta de la segadora. Suelte Ia abrazadera de cierre parafijar el adaptador en la boquilla. Puerto de Lavado IMPORTANTE: Tire de la manguera para asegurarse de que la conexi6n est& bien fija. 5. 6. Abra la Ilave del agua. Desde la posici6n del operador del tractor, vuelva a arrancar el motor y ponga la palanca de aceleraoi6n en la posici6n "Fast" (r&pido). IMPORTANTE; Vuelva a cornprobar la zona para asegurarse de que est& despejada. 7. Mueva el control del embrague del accesorio a la posici6n"ENGANCHAR". Mant_ngase en la posici6ndel operador con la cubierta de corte acoplada hasta que la cubierta est_ limpia. 51 8. Mueva el control del embrague del accesorio a Iaposici6n"DESENGANCHADO", Gire la Ilave de encendido a Ia posici6nSTOP para apagar el motor del tractor. Cierre la llave dot agua. 9. Tire hacia atr&s la abrazadera de cierre del adaptador de la boquit[a para desconectar et adaptador del puerto de lavado de Ia cubierta. I0. Lleve el tractor a una zona seca, preferentemonte de cemento o pavimentada. Mueva el control del embrague del acc_sorio a ta posJci6n"ENGANCHAR" para quitar el exceso de agua y ayudar a que se seque antes de guardar el tractor. _ADVERTENCIA: Si el accesorio de lavado est& roto o no est,, Ud. y otras personas estar_n expuestos a que la hoja los lance aqueUos objetos con los que entre en contacto. • Sustituya inmediatarnente el aecesorio de lavado roto o que falta antes de volver a usar la segadora. • Tapetodos los orificios de la segadora con pernos y tuercas de seguridad. A DVERTENCIA:PARA EVITAR LESt6NES SERIAS, ANTES DE DAR CUALQUIER SERVIC]O O DE HACER AJUSTES: 1. Presione el pedal de freno cornpletarnente y aplique el freno de estacionarniento. 2. Ponga at embrague del accesodo en Ia posicion desenganchado (DISENGAGED). 3. Ponga la llave de ignici6n en la posici6nde apagado (STOP) y remu@vala. 4. AsegOrese que las cuchillas y que todas [as partes movibles se hayan detenido cornpletarnente. 5. Desconecte el atarnbre de la bujfa y p6ngalo en donde no pueda entrar en contacto con @sta. PARA DESMONTAR 1. 2. 3. 4. 5. 6. 7. LA CORTADORA Suelte el ernbrague poni_ndoJo en ta posici6n "DISENGAGED" ("DESACTIVADO"). Baje la palanca elevadora de montaje a la posici6n de rn&s abajo. Ruede ]a correa de polea dat motor (M) y fijadors de la correa (G). Retire el resorte de sujecibn (K), deslice ta abrazadera (L) hasta quitarla, y saque a presibn la guia de la caja (P) hasta que se salga del soporte. Retire el resorte deI cable del ernbrague (Q) deI brazo deI engranaje (R). Desconecte la pieza de uniSn anterior (E) de la cortadora - retire el resorte de contencibn y la arandela. Pot uno de los lades de ta cortadora, desconecte el brazo de suspensi6n de la cortadora (A) del chasis y la pieza de uni6n posterior (C) de Ia barra posterior de la cortadora (D) - retire los resortes de contenciSn y tas arandelas, _k CUIDADO: Una vez que se desconecten Jas piezas de uni6n posteriores, la palanca elevadora funcionar& a resorte. Sujete con fuerza ta palanca atevadora at carnbiarlade posici6n. 8. Deslice ta cortadora por debajo del Iado derecho det tractor. IMPORTANTE: Si se monta un accesorio diferente del cortac_sped at tractor, hay que quitar et estribo frontal (E) y los estribos traseros de elevaciSn (C) del tractor y enganchar el resorte de embrague (Q) en ]a guia deI cable en el horde frontal deI salpicadero rn&s bajo. INSTALE LA SEGADORA Aseg_rese de que el tractor se encuentre en una superficie nivelada, y ponga el freno de mano. 1. Haga descender la palanca elevadora a su _lPOSiCiSn rn&s baja. CUIDADO: La palanca elevadora funciona a resorte. Suj@telacon fuerza, h&gala descender ]entamente y tr&nquela en la posici6n rn&s baja. NOTA: Cerci6rese de que los brazes de suspensiSn de los lados de ]a segadora (A) est6n didgidos hacia adelante antes de deslizarla por 2. Deslice ]a SEGADORA pot debajo del tractor hasta que quede bien centrada debajp de 6ste. 3. FIJE LOS BRAZOS DE SUSPENSION LATERALES DE LA CORTADORA (A)AL CHAStS - Ubique el orificio del brazo encima de la clavija (13)que hay en la parte exterior del chasis deI tractor, y fijelo con una resorte de contenci6n. ® 03042te_ 52 4-, 5. Realice el mismo procedimiento en el otto lade del tractor. FIJE LAS PIEZAS DE PROPULSK_N POSTERIORES (C) - Levante Ia parte posterior de la cortadora, ubique la ranura de la pieza de uni6n (D) per encima de la clavija que hay en la barra posterior de la cortadora y fijela con una aranclela y un resorte de contenciSn. 9. Retire el resorte de sujeci6n (K), deslice Ia abrazadera (L) hasta quitarfa, y saque a presi6n la gu[a de la caja (P) hasta que se salga del soporte. 10. Instale la correa pas&ndola per encima de la polea del motor (M) y fijadors de Ia correa (G). IMPORTANTE: Verifique que la correa encaje bien en todas las ranuras de las poleas de la cortadora. 11. Suba la palanca elevadora a la posici6n de m_ts arriba. 12. Si es necesario, ajuste Ias rueditas del calibre antes de poner en funcionamiento fa cortadora, come se ilustra en el capitulo de Manejo de este manual. 6. FIJE LA PIEZA DE UNION ANTERIOR (E) - Trabaje per el lade izquierdo del tractor. Introduzca el extreme de Ia barra de la pieza de uni6n per el orificio anterior de la barra de suspensi6n anterior del tractor (F). 7. Introduzca et otto extreme de la pieza de uni6n (E) en el odficio que se encuentra en Ia barra anterior de la cortadora (H), y fijelo per medio de una arandela y un resorte de contenci6n (J). 8. Retire el resorte del cabte del embrague (Q) del braze del engranaje (R). 03042_X 53 PARA NIVELAR LA SEGADORA Aseg0rese de que los neum_,ticosest_n inflados ala PSi que se indice en estos. Si est&n demasiado inflados o poco inflados, el c6sped no le quedar_, bien cortado, Io cual podr& Ilevarlo a pensarque la SEGADOP_ no estA bien regulada. REGULACION VISUAL DE LADO A LADO 1. Si todos |os neum&ticos est_n correctamente inflados y el c_sped parece haber quedado cortado desparejo, determine qu_ lado de la cortadora est& cortando m&s aI ras. 5. Vuelva a verificar Ias medidas y ajuste nuevamente, en caso necesario, hasta que ambos Iados queden iguales. AJUSTE DE DELANTE A ATRAS IMPORTANTE: El piso debe quedar bien nivelado de lado a lado. Pare que el c@speclle quede perfectamente cortado, tascuchillas de ta cortadora deben aiustarse de tel manera que la punta anterior quede I/8" a 1/2" m&s abajo que la punta posterior cuando la cortadora se encuentre en su posiciSn m&s atta, 2. Con una Ilave inglesade 3/4"o de calibre regulable, haga girar hacia fa izquierda la tuerca de ajuste de la pieza de uni6n (A) para bajar ledo izquierdo la cortadora, o bien h&gala girar hacia Iado derecho la derecha para subirla. NOTA: Cada vuelte complete de Ia tuerca de ajuste hat& variar la alture de la cortadora aproximadamente 3/16", Hagagirar la HagagirarIa tuerca tuerca hacia! la derecha segadora j_OUIDADO: Lasguantes cuchillaso son afiladas. Prot6ase las manos con envuelve tascuchitIas con te]a gruesa, o bien haga ambas cosas, • Suba la SEGADORA ala posici6n m_.salta. • Ubique cuelquiera de las hojas de la cuchilla de tel manera que la punta quede apuntando directamente hacia adelante, Mida la distancia (B) que hay entre la punta anterior y el suelo y entre la punta posterior y el suelo. Si la punta anterior de Ia hoja de ]a cuchiila no estA 1/8" a 1t2" m&s abajo que la punta posterior, dirijase ala parte de adelante del tractor. o Con una Ifave inglesa de t 1/16" o de calibre regulable, afloje Ia tuerca A, d&ndole varies vueltas para despejar la tuerca de ajuste B. " Con una Ilave inglesa de 3/4" o de calibre regulable, haga girar fa tuerca de ajuste de la pieza de uni6n anterior (t3)en sentido horatio (ajustar) pare elevar la parle de adelante de la cortadora, o bien en sentido antihorario (afIojar) pare bajarla, hacia la izquierda .pare bajarla segadora 3. Pruebe la regulaci6n realizada cortando c6sped queadn no hayacorlado y observando c6mo queda. Vue]va a ajustar, en caso necesario, haste obtener resultados satisfactorios. REGULACION DE LA PRECISION DE LADO A I.ADO 1, Con todos los neum&ticos correctamente inflados, estacione el tractor a nivel del suelo o en la eatrada a _acasa. _t, CUIDADO: Las cuchi[Iasson afiladas. Protbase lasmanos conguantes o envuelvalas cuchilascon tela-gruesarobien haga ambas coses. ..................... 2, Suba la SEGADORA ala posici6n m&s alta. Ajuste Ia tuerca de regulaci6n de regulacibn 3. A embos lados de la cortadora, ubique la de altura B de altura B para cuchitla hacia un lado y mida la distancia (A) para levantar Ia que hay entre el horde inferior de la cuchi!la segadora y el suelo. Dicha distancia debe ser la misma a ambos lados. 4, En caso que sea necesado realizar un ajuste, lea los paso 2 de las instruccionesde ReguNOTA: Cada vuelta complete de la tuerca de laci6n Visual que aparecen mAs ardba. ajuste har& variar la altura de la corladora 1/8". . Vuelva averificar las medides y ajuste nuevamente, en caso necesario, haste queta punta anterior de la hoja de la cuchilla quede 1/8" a 1/2" m&s abajo que la punta posterior. • Mantenga en la posici6n Ia tuerca de ajuste por medio de una ltave inglesa, y apriete bien la tuerca contra dicha tuerca de ajuste. 54 PARA CAMBIAR LA CORREA DE IMPULSI6N DE LA CUCHILLA SEGADORA La correa de impulsi6n de la cuchiI]a segadora se puede cambiar sin herramientas+ Estacione el tractor en una superficie nivelada+ Enganche el freno de estacionamiento. REMOCION DE LA CORREA I. Remueva Ia segadora del tractor (Vea "PARA REMOVER LA SEGADOR/_' de esta secci6n de este manual). 2. Haga salir la correa de las poleas del mandril y de Ias poleas de guia. 3. Tire la cgrrea alej&ndo]a de la segadora, iNSTALACION DE LA CORREA 1. Haga rodar ia correa alredeor de ambas poleas deI mandrin y de las poleas-gui'as+ 2+ Aseg0rese Ias correas esten en todas las ranuras de Ias pe[eas y at interior todas Ias gu_as de la correa. 3. lnstalelasegadora (v_a"PARAINSTALARLA SEGADORA"en esta secci6n de este manuaJ). Poiea Del Mandril MONTAJE DE LA CORREA 1. Instale la eorrea nueva de la parte de atr&s a la parte de adefante del tractor, pas_ndola pot encima de Ia placa de direcci6n (F) y deL v&stago del pedal del embrague / freno (G). 2. Jale la correa hacia la parte de adelante del tractor y I_selo per sobre ta poleadel motor (E). 3, Jale Ia correa hacia la parte de atr_.s deI tractor. Con mucho cuidado, mueva la correa hacia abajo y p&sela alrededor del ventilador de transmisi6n y por encima de la polea de entrada (D), Cerci6rese de que Ia correaest_ calzada dentro del guardacorrea, 4. Coloque la correa sobre el pi56n central (C)+ 5+ Paso la correa atrav_s del pi56n estacionario (A) y del pi56n deI embrague (B). 6. Aseg0rese de que la correa calce en todas las ranuras de Ias poleas y dentro de todas las guias y guardacorreas_ 7. Instale la SEGADORA (Ver '+PARAMONTAR LA SEGADORA_'en este capitulo del manual). Poleas De Gufa Polea DeI PARA CAMBIAR LA CORREA IMPULSION DE MOVIM1ENTO DE Estacione e] tractor en una superficie nivelada+ Ponga el freno de mano. Si necesita asistencia, del Iado de abajo del apoyapi@s hay una guia pr_.cticapara el montaje de la correa. DESMONTAJE DE LA CORREA 1. Desmonte la cortadora (Ver "PARA DESMONTAR LA CORTADORh:' en este capitulo -del manual): NOTA: Observe toda la correa de impulsi6n de movimiento y la posici6n de todas las guias y guardacorreas+ 2. Retire la correa deI pi56n estacionano (A) y de] pi56n de embrague (B), 3. Retire la correa del pi_6n central (C). 4. Jaie el cable de la correa hacia la parte de atr&s deI tractor, Con mucho cuidado, retire la correa de la polea de entrada de Ia transmisi6n, movi_ndola hacia arriba y pasAndola por encima de Ias paletas del ventilador (D)+ 5+ Retire la correa de [a polea del motor movi@ndola hacia abajo (E). 6. Deslice Ia correa hacia la parte de atr&s del tractor, retirela de ta ptaca de direcci6n (F) y quTteladel tractor. 55 IMPRESION / INCLINAC|ON DE LAS RUEDAS DELANTERAS La impresi6n e inclinaciSn de 3as ruedas delanteras de su nuevo tractor vienen asi dof&brica y son normaleso La impresi6n y la inclinacionde Ias ruedas delanteras no son regulables. En caso que se produzca alg0n daSo que afecte la impre+ si6n o la inclinacibn de Easruedas delanteras tal como vinieron de fAbrica, p6ngase en contacto con un centro de servicios Sears u otro centre do servicios autorizado. CONTROLAR Y AJUSTAR EL FRENO Si el tractor exige m_.s de cinco (5) pies para pararse a una velocidad m&s alta en el cambio m&s alto en una superficie nivelada de hormig6n seco o pavimentada, entonces se debe controlar y ajustar el freno. CONTROL DEL FRENO 1. Aparcar el tractor en una superPicie nivelada de hormigdn seco o pavimentada, presionar el pedal del freno hast_ el fondo y accionar el freno de estacionamiento. 2. Desembragar la transmisi6n colocando el mando de la rueda tibre en la posicidn "transmisi6n desembragada". -I-irar el mando de la rueda Iibre fuera y dentro la ranura y soltar asi se coloca en la posici6n desembragada. Las ruedas traseras tiene que bloquearse y patinar cuando se intenta empujar hacia adelante el tractor manualmente. Si las ruedas traseras giran, es necesario ajustar el freno o sustituir las zapatas. PARA REMOVER LAS RUEDAS PARA HACER REPARACIONES Bloquee el eje en forma segura. Remueva lacubierta del eje, el anillo de retencidn y las arandelas para permitir Ia remocibn de !as ruedas (la rueda trasera contiene una llave euadrada - no la pierda). 3. Repare Ia Ilanta y vu_tva[a a montar. AVISO: En las ruedas traseras solamente: atinee las ranuras en eI cube de la rueda trasera en e[ eje. Inserte la tlave cuadrada. 4. Vuelva a colocar Ias arandelas e inserte et anilIo de retencidn en forma segura en la ranura del eje. 5. Vuelva a colocar ta cubierta de1eje. AVISO: Para arreglar Ias Ilantas perforadas y p_ra prevenir que tenga Ilantas pinchadas a causa de pequeSas fugas, comprar de su commerciante Sears y utilizar et sello para llantas. Elsello previene que las Ilantas se sequen y tambi@n la corrosidn. Si se usan "cables de empalme" para un arranque de emergencia, siga este procedimiento: IMPORTANTE: Su tractor esta equipado con un sistema de t2 volts. El otro vehiculo tambi@n tiene que tener un sistema de 12 volts. No use la bateria de su tractor para hacer arrancar a otros vehiculos. PARAADJUNTAR LOS CABLES DE EMPALME1. Conecte cada extreme del cable ROJO con el terminal (A-B) POSITIVe (+) de cada bateria, preocup&ndose de no hacer cortocircuitoen el chasis. 2. Conecte un extreme del cable NEGRO con el terminal (C) NEGATtVO (-) de una bateria completamente cargada. 3. Conecte eI otro extreme d el cable (D) NEGRO con un buena CONEXION A TIERRA DEL CHASIS, atejado deI estanque de combustible y de la bateria. PARA REMOVER LOS CABLES, INVIERTA EL ORDEN 1. El cable NEGRO primero del chasis y luego de la bateria completamente cargada. 2. El cable ROJO aI _Itimo de ambas bateHas. 1. 2, Arandelas Ani[[o de Retencidn Bateria Debii o Descargada 8aterta Corop[etamente Cargada REEMPLAZAR LA BATERIA _ADVERTENCIA: No hagacortocircuitocon los terminales de Ia bateria at permitir que una Ilave de tuerca o cualquier otro objeto entre en contacto con ambos terminales a Ia misma vez. Antes de instalar ta bateria remueva Easpulseras de metal, los relojes de pulsera de metal, los anillos, etc. El terminal positive tiene que conectarse pdmero para evitar Ias chispas debido a la conexiSn a tierra per accidente. Cubierta del eje DeI Asiento Llave Cuadrada (rueda =_._._=_ trasera solamente) PARA HACER ARRANCAR EL MOTOR CON UNA BATERiA BAJA _pADVERTENC]A: Las baterias de _.cido-plome generan gases explosives. Mantenga las chispas, las llamas y los materiates para fumar alejados de las baterias. Siempre use una proteccibn para los ojos alrededor de las bater[as. Si su bateria est,. demasiado baja come para hacer arrancar el motor tiene que votverse a cargar. (Vea "Bateda" en la seccibn de Mantenimiento de este manual). Oubierta Terminal Cable (positive) 56 ruerc_ Cabte Negro (negative) Perno 1. 2. 3, 4, TRANSMISION Levante el asiento a la posiei6n elevada, Remueve la protecci6n de los terminales. Desconecte el cable de Ia bateria NEGRO primero y luego el cable de la bateria ROJO y remueva la bateria del tractor, Ins'tale la nueva bateria con los t6rminos en misma posici6n como la bateria vieja, REMOCIONiREEMPLAZO MISI6N DE LA TRANS- Si por acaso su transmisi6n debe ser removida para servicio o reemplazo, debe set purgada despu_s de ta reinstalaci6n y antes de operar el tractor. Vea "PURGAR LATRANSMISION" en la secci6n de la Operaci6n de este manual. 5. 6. Reemplazamos cubierta terminal, Primero, conecte el cable de la bateria ROJO con el terminal positivo (+) con el pemo hexagonal y la tuerca seg_n se muestra, Apri6telos en forma segura. 7. Conecte el cable de conexi6natierra NEGRO alterminal negative (-) con el perno hexagonal y la tuerca que queden. Apri_telos en forma segura, 8. Cerramostaasiento. MOTOR PARA AJUSTAR EL CABLE DE CONTROL DE LA ACELERACION El control de la aceleraci6n ha sido preajustado en la f&brica y no deberia necesitar ajustes. Revise los ajustes que se describen a continuaci6n, antes de sottar el cable. Si el ajuste es necesario, vea de manual de motor. PARA AJUSTAR EL CONTROL DE ESTRANGULACION PARA CAMBIAR LA BOMBILLA DE LA LUZ DELANTERA El control de la estrangulaci6n ha side preajustado en la f&brica y no deberia necesitar aiustes. 1. Levante el cap6. 2. Tire el sujetador de ta bombilla fuera deI agujero en la parle trasera del enrejado. 3. Cambie la bombilla en el sujetador y empuje el sujetador de ta bombilla, en forma segura, hacia atr&s en el agujero en la parte trasera del enrejado. 4, Cierre etcap6, PARA AJUSTAR EL CARBURADOR El carburador ha sido preajustado en la f_.briea y no deberia necesitar ajustes. Sin embargo, se pueden necesitar ajustes de menor importancia para compensar por las diferencias en el combustible, temperatura, altura o carga. Si el carburador necesita ajustes, vea de manual de motor. ENTRECIERRE Y RELIES El alambrado suelto o dafiado puede producir el mal funcionamiento de su tractor, o que deje de funcionar, o le impida el arrancar, * Revise el alambrado. PARA CAMBIAR EL FUSIBLE C&mbielo por un fusible tipo enchufable de 30 amps, tipo automotriz. El sujetador del fusible est& ubicado detr&s det tablero. PARA REMOVER EL CONJUNTO DEL CAP6 Y DEL ENREJADO 1. 2. Levante el cap6. Desabroche el coneotordef alambre de las luces delanteras, 3. P_.rese delante del tractor. Agarre el cap6 en los lades, inclinelo un poco hacia el motor y ............... s&quelo del-tractor,4. Para vo[ver a instalar el cap5, aseg0rese de volver a conec_ar el conector del atambre de las luces. Conecto[ del alambre de [as Luces Delanteras 57 • Vaciar el dep6sito de[ carburante poniendo en Inmediatamente prepare su tractor para el almamarcha el motor y dej&ndolo funcionar hasta cenamiento aI final de la temporada o si el tractor que el carburante termine el carburador est_ no se va a usar pot 30 dias o m&s. vacio. _bADVERTENOIA: Nunca almacene el tractor • Nunca use los productos para limpieza del con gasolina en el estanque dentro de un edificio carburador o deI motor en el estanque de en donde los gases pueden alcanzar una llama combustible pues se pueden producir dafios expuesta o una chispa. Permita que el motor se permanentes, enfrie antes de almacenar[o en cualquier recinto • Use combustible nuevo la pr6xima temporada, privado, AVlSO: El estabilizador de combustible es una TRACTOR altemativa aceptable para reducir a un minimo Cuando el tractor se va a almacenar pot cierto la formaci6n de dep6sitos de goma en el comperiodo de tiempo, limpieIa cuidadosamente, bustible durante el periodo de almacenamiento. quite toda Ia mugre, la grasa, las hojas, etc. Agregue estabilizador a la gasolina en el esGu_.rdela en una &rea Iimpla y seca. tanque de combustible o en el envase para el t. Limpie todo el tractor (vea "LIMPtEZ_' en la almacenamiento. Siempre siga la proporci6nde seccibn de Mantenimiento en este manual). mezcla que se encuentra en el envase del estabi2. Inspeccione y cambie tascorreas, si es necelizador. Haga funcionar el motor por Io menos 10 sario (vea las instrucciones para el cambio de minutos despu_s de agregar el estabilizador, para las correas en la secci6n de Servicio y Ajustes permitir que _ste []egueal carburador. No vaciar la de este manual). gaselina del estanque de gasolina y el carburador 3. Lubriquelo, segSn se muestra en la secci6n si se est& usando estabilizador de combustible. de Mantenimiento de este manual. ACEITE DEL MOTOR 4. Asegflrese quetodas ]astuercas, los pernos y Drene el aceite (con el motor caliente) y c&mbielo los tornillos est_n sujetados en forma segura, con aceite de motor limpio. (Vea "MOTOR" en Inspeccione Ias partes movtbles para verificar la secci6n de Mantenimiento" de este manual.) si hay dafio, rotura o desgaste. C&mbielas si es necesario. CILINDRO(S) 1. Remueva la(s) bujia(s). 5. Retoque todas superficies pintadas oxidadas 2. Vacie una onza de aceite a trav_s deI o picadas; aplique lija antes de pintar. agujero(s) de la bujia en el cilindro(s). BATERIA 3. Gire Ia tlave de ignici6na la posici6n de 'Ar• Cargue la bateda completamente antes de ranque" (Start), por unos cuantos segundos guardarla. para distribuir el aceite. • Despu_s de cierto periodo de tiempo en alma4. Cambie por bujia(s) nueva(s). cenamiento, la bateda puede necesitar volver OTROS a cargarse. • No guarde Ia gasolina de una temporada a la • Para ayudar a evitar la corrosi6n y Ias fugas otra. de potencia durante largos periodos de alma• Oambie el envase de Ia gasolina si se empcenamiento, se deben desconectar los cables ieza a oxidar. La oxidaci6n y/o Ia mugre en su de la bateria y se debe Limpiar cuidadosamengasolina producir&n problemas. te (yea "PARA LIMPIAR LA BATERIA Y LOS • Si es posible,guarde su unidad en un recinto TERMINALES" en Ia secci6n de Mantenimiencerrado y cSbrala para protegerla contra ef tode este manual). polvo y la mugre. • Despu6s de limpiarla, deje los cables desco• Cubra su unidad con un forro protector adnectados y p6ngalos en donde no puedan ................................. entrar._en .contacto conJos term na es.de, a .................... ecuad_.que_o.o. [etenga la h#fnedad._Ng__use....... bateria. pI_tstico. El pl&stico no puede respirar, Io que • Si se remueve la bateria deI tractor para el permite la formaci6n de condensaci6n, Io que producir&la oxidaci6n de su unidad. almacenamiento, no la guarde directamente IMPORTANTE: Nunca cubra el tractor mientras sobre concreto o sobre superficies ht_medas. el motor y las areas de escape todavia estan MOTOR calientes, SISTEMA DE COMBUSTIBLE IMPORTANTE: Es important evitar que se forman depositos de goma en partes fundamentales del sistema de combus-tible tales como et carburador, el fittro del combustible, la manguera del combustibles mezclados con alcohol (conocido como gasohoI o que tienen etanot o metanol) pueden atraer humedad, 1o que conduce a Ia separacibn y a la formaci6n de acudos durante elaimacenamiento. La gasolina acidica puede dafiar el sistema de combustible de un motor durante el periodo de almacenamiento. 58 IDENTIFICACION Vea Áaseccibn DE PROBLEMAS: apropiada PROBLEMA No arranca en el manual a menos 1, 2. Liens eI'esi'anque de combu"stibIe. Vea "PARA HACER ARRANCAR EL MOTOR" en la secci6n de operaci6n, Espere varies minutes antes detmtar de arrancar, 4. 5, 6. 7. Buiia male, Fittro de aim sucio, Filtro de combustible sucio. Ague en elcombustible, 4. & 6. Cambie la buj_a, Umpieicambie el filtro de airs, Carnbie el l/[tfo de combustible, 7. Vaciar el estanque de combustible y el carburador, vuelva a llenar el estanque con gaso[ina nueva cambie el filtro de combustible. & Alambrado suelto o dafado, 8, Revise todo e] alambrado, 9, Carburador desajustado. 9. Vea=PARAAJUSTAR EL CARBURADOR" en Ia secci6n de Servicie y Ajustes, 10, Pongase en contacto con un centro de servicio cualificado "SEARS". & V&lvulas del motor desajustadas. _,,,,_,,,,,,,,,,,_ ........ ,,,,,, 1, Filtro de airs sucio, 1. Umpie/cambie el filtro de airs. 2, Buj{a mala. 2+ Cambie la bajia. 3. 4. Bateria baja o descargada. Filtro de combustible sucio. 3. Vus_vaa catgar 0 cambie la bated& 4. Cambie eI tiltre de combustible, 5. Combustible rancio o sucio, & Vaciar elestanque de combustible y vuelva a IlenarIo con gasoline nueva. Revise redo el alambrado. & Alambrado suelto o dafiado, 6. 7. Carburador desajustado, 7, Vea"PARAAJUSTAR ELCARBURADOR" en Ia secei6n de Servicio y Ajustes. 8. V_lvulas del motor desajustadas, 8. Pongase en contacto con un centre de serwcio cualiflcado "SEARS", Presione et pedal del frene. ........................ ,,,L t. 2. Pedal del freno no presionado, 1, Efembrag uedelacceso rioest&en ganchado, 2. Desengancheelembraguedelaceesorio. 3, Bateria baja o descargada, & Vuelva a cargar o cambie la bateria, 4, Fusible quernado. 4. Cambie elfusible, 5. Terminales de Iabateda corroidos, 6. Alambrado sue[to o daaado, 5. 6. Limpie !esterminales de la bateria. Revise todo el atambrade. 7. Interrupter de la ignici6n fallado. 7. Reviseicambie el interrupter de la ignicibn, & SoIenoide o arrancador fallados, & Reviseicambie el solenoide o ar_ancador. & lnterruptor(es) que exige(n) Ia presencia i deI operador fallado, 9, Pongase en contacto con un centre de sen/tclo CLlallficado SEARS. Eim0tor ......... 1; suena pete 2. aFranca 3. P_rdida de luerza Sears. 3. , ,,,,,,,L Re de servicio l_ 2. ,,,,, El motor no la vuelta a un centre CORRECCION Sin combustible, Motor sin la"ESTRANGULACI6N" (CHOKE) adeeuada, Motor ahogado, 10, Dif[cn de _lrraTlear que est_ dirigido CAUSA Bateda'baja o deseargada ..................... ....1, Vuelva a cargarO cambiela bater[a, ............. TerminaJes de la bateria corroidos. 2. Umpie Eosterminales de la batefia, Alambrado suelto o dahado. 3 Revise tode el alambrado. Solenotde o arrancador fallados. 4. Reviseicambie,,el soleno!de o arrancador, Corta macho c_sped, muy r_,pido. Aceleraci6n en lapesici6n de "ESTRANGULACION" (CHOKE), Acumulaci6n de c6sped, hojas y basura debajo de la segadora, 1. 2. Elevelaalturadecorte/reduzcalavelocid_d AjuSte el control de Eaaceleraeibn, s. Limpie la parts inferior de la caiade Ia segedora. 4, 5, 6. Filtro de airs sucio, NIvel de aceite bejo/aceite sucio, Bujia f_llada, 4. 5. & 7. & Filtro de combustible sucio, Combustible rancio o sucio, 7, 8. Umpie/cambie el filtro de sire. Revise eI nivel de aee_te/cambie el aceite, Limpie y vuelva a ajustar la abertura o cambie ta bujia, Cambie el filtro de combustible. Vaciar elestanque de combustibleyvuelva a Ilenado con gasoline nueva, 1. 2, 3. 59 IDENTIFICACI6N Veala secci6n DE PROBLEMAS: apropiada PROBLEMA P_rdlda de fuetza (sigue) a menos que est_ dirigtdo CAUSA & l& 12. 13. 14. l& Vlbracl6n excesiva en el manual ' Agua en el combustible, Alambrado de ia bujia suelto. Rejilla/aletas de aire del motor sacias. 8ilenciader sucio!taponado, Alambrado suelto o dalmatia. Carburador desajus_ado. V_Ivulas del motor desajustadas. centro de servicio Sears. CORRECC1ON " 9'. Vaciar siesta nquede cembustible yei'carburadar,vuelva a Ilenar el estanque con gasolina nueva y cambie elfiltro de combustible. 10. Conecte y apriete el alambre de ta buj{a. 1t. Limpie las rejillajaletas de airs del motor, 12. Limpie!cambie e[ sffenciador. 13. Revise todo el alambrado, 14. Vea"PARAAJUSTARELCARSURADOR" an la secci6n de Setvicio y Ajustes. 15. Pongase en contacts con un centre de servicio cualiflcade "SEARS". 1. CechffJa desgastada, doblada e suelta. t. 2. 3, Mandril de la cuchitladoblade. 2. s. Parts(s) suelta(s)idafiada(s). aun Cambie la cuchilla. Apriete el perno de la cuchilla. Cambie la mandril de Ia cuchilla. Apdete {a(s) parte(s). Cambie Ias partes dafiadas. ,, ,,,,, El motor €ontin,',afuncionan_ cuartdo el opetador se bajs de[ as]ento con e] embrague det sccesorlo enganchsdo E! corte Revise el alambrado, los interruptores y Ia cone×iones.Si no estdn correctas, Pongase an contacts con un centre de servicio cualificado "SEARS". 1, Sistema de control qua exige la presencia deI operador -seguridad fatlado. 1. CuchUla desgastada, doblada o suelta. 1. 2, El conjunto segador no est_.nivelado. Acumulaei6n de cesped, hojas y basura debaio de la segadora. Mandril de Ia cuchilla doblado. Los agujeros de ventilaci6n del conjunto segador taponadosdebido ala acurnulac_6n dec6-sped, hojas y basura alrededorde los mandriles. 2. 3. disparejo 4. 5. Cambie Ia cuchilla. Apdete el perno de la cuchilla. Niveleelconjunto segador. Limpie Ia parte inferior de la cajade Ia segadora. Gamble la mandril de la cuchilia. Limp!e alrededor de los mandriles pars abrir los de ventilaci6n. ,,,,,,,,,,,,,,,,, Las cuchlltas segadoras no rotan 1, 2. 4_ ObslrucciSnene[mecanismodelembrague. Lacorreade impulsibnde lasegadoraest& desgastada/da_ada, Polea de gu_a atascada. Mandril de la cuchilIa atascado. 1, Velocidad del motor muy lenta. I, Acumulaci6n de c@sped, hojas y basura debaio de Ia segadora, La eorrea de impulsi6n de Iasegadora est& desgastada o desajustada. I_as cuchilIas est&n real eoniestaladas. 7. 3. Mala des¢arga del c_sped ................................................. 2_ 3. 4/ 5. 6. 7, 8. & l& 3. 4. Remt_eva la obstrucci6n. Cambie ia certes de impulsi6n de Ia segadora. Cambie la poise de guia, Oambie la mandril de la euchiI_a. Ponga et centrpl de ia ace'i'eraciSn an la posiciSn de "RAPIDS" (fast), Velocidad de recorrido demasiado r_pida. 2r Cambie a una velocidad m&s lenta. C6sped me|adz. 3. Permita qua se seque el c6spedantes de segar, E1conjunto segador noest&nivelado; ..........4;- N;vele-el conjanto segador. .............................. PresiSn de airs de las [lantas baiao 5. Revise las Ilantas pars ver_carque tienen dispareja. la presi6n de airs. & Cambie/afiIe ]a cuchilIa. Apriete el perno Ouchilla desgastada, doblada o suelta. de la euchiffa, & 9. CuchilIas inedeeuadas en use, t& Los agujeros de ventilaci6n deI conjunto aguieros segador taponados debido ala acumulaci6n de e6sped, hojas y basura al_ededor de los mandriles. 11. 6O Limpie la parte inferior de fa cajade Ia segadora. Cambieiajuste la cortes de impulsi6n de Ia segadera. Vuelva a instalarIas cuchillas elbsrdeafilado hacia abajo. Cambie par las cuchilias enumeradas en este manual. Limpie alrededor de los mandriles pars abrir los de venti[aci6n. IDENTIFtCACI6N DE PROBLEMAS: Vea la seccibn apropiada en el manual a menos que est_ dirigido a un centre de servicio Sears. Las luz (cesi de lantera(sl no funciona, ndo La baterla no carga 1. E[ inteirruptor esi& "APAGADO"(OFF). 1. "ENCIENDA" (ON) el interrupter. 2. Bombilla(s) o I&mpara(s) quemada(s). 2. 3. 3. Cambie la bembilIa(s) o I&mpara(s). Revise!cambie el interrupter de la Iuz. 4, Interrupter de Ia luz fallado. AIambrado suelto o dahado. 4. Revise el alambrado y Ias conexiones. 5, Fus.!,blequemado, 5, Cambie el fusible. 1. Elements(s) de la bateria male(s). Malas conexiones de cables. Regulador fal]ado (st equipado), A[temador fallado. ,, ,,,,,,,,, 1. Cambie la baterfa. Revise/Iimpie todas lascabIes. Cambie el regulador. Gamble el alternador. ,,, ,,,,,,,,,,, 2_ 3. 4, P_rdida de impulsiSn CORRECCI6N CAUSA PROBLE_ 1. 2, 2, 3, 4. El control de rueda libra est& enla posiciSn "OESENGANCHADO" (disengaged). Residues es en de ia piaca de direcciSn. 3. La correa de impulsion de impulsi6n de movimiento. 4o Aire atrapado en la transporte o etsetvicio. 5_ Liars cuadrada de eje es ausente. El motor tien "contraexptosiones '* cuando se "APAGA" El tractor se ponen marcha atr_s 1. 2. 3. 4. 5, Ponga el control de rueda libra enla posici6n "ENGAN GHADO"(dIse ngaged). Vea"LIMPIEZA_' en [a secci6n de Mantertimenlo de este manual, Reemplaee la correa de movimien-to esta gastada, da_,ada o rata. Purgue [a transmisi6n. Vea "PARA REMOVER LAS RUEDAS" en la seccibn de Servicio y Ajestes de este manual. i. tEicontroI de la aceleraciSn del motor no rue ajustadoen ta posici6n de velocidad media y m_lxima (r&pida) antes de para el motor, Mueva el control de la aceIemcibn a Ia posici6n de velocidad media y m_ima (r_pida) antes de para el motor. 1, El sistema defunc[onamienlo atr_s (ROS) no est& "ON", cuando enganche la sagadora o otro accesorie. Girar el ROSen la posici6n "ON".Vea la secciSn de operacton. 61 GUiA SUGERIDA PARA MEDIR LAS PENDIENTES CON LA VISTA PARA UNA OPERACtON SEGURA ! Para evitar daSos y abajo de las pen_ientes, nunca transversalmente con reapecto aras I ADVERTENCIA; graves, hags funcionar su tractor arrlbs I pendientes. No corral pendientes mayores de 15 grados. Hags los | vlraJes gradualmente pars evitar volcarse o la pdrdtda de control. I Tenga mucho cuidado auando eatable de direcci6n enlas pendientes. 1. Plegar esta pdglna a Io largo de ta Ifnea punteada arriba indicada. 2. Tenet Japdgina ante de sl'mismos de modo que su borde |zquicrdo sea vertical paralelo al tronco de| _rbol u otra estructUra vertical 3. Mirar a trav6s del pliegue en direcel6n de la pendiente que se quiere medir. 4. Compsrar el .'_ngulo del pliegue coo ta pendiente de! terreno. I i NEED MORE HELP? i You'[[ find the answeT and luo_e o_ mar_agemyhome.com i . Find this •i and all your other product manuals - _or f_ee! online. _': • Get answers from our team of home experts. _ • Get a personalized maintenance plan for your home. • Find information and tools to help with home projects. manage home brought to you by Sears Your Home For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it{ For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional instaI]ation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME (1_00-459..4663) ® A_ytime, dayor night (U.S.A. and Csnada) www.$eaPs.co:03 WWW,seait$; C_ Our Home _S For repair of carry-in products like vacuums, lawn equipment, and electronics, ca[I or go on-line for the nearest Sears Parts and Repair Center. !_i_ %800-488-1222 _ ._ Anyt{me,dayor night (U.S.A. only} _,_._e_._ ................... TO purchase a protection agreement (U.S.A.) ..................... or maintenanCe agreement (Canada) on a product serviced by Sears: _-_ 1-800-B27=6655 (U.S.A.) _i_ _ Para pedir servP,.iode reparadOn a domic_lio, y para ordenar piezas: _s_ 1.888.SU.HOGAR _ %800-361-5665 (Carat) _i_ _! i_ Au Canada pour service en fran(;ais: 1-800-LE-FOYER Mc 0_7) _ _{_i _ ©_P_'_tSB_ands, LL_ ® Regislere_ Trademark / TM T{ademark t s_ $ervi_.._ Mark oI _ ea_*sBrands, LLC ® Marca Registr_da ! TM Marca de Fdbrica / s_ Marca _e ServiCed de Sears Bra_0s. w: M,trque 11.01,12 BD de cOmmerce I _'_ M_rque dttpoe_e de Seats Bran_s, LLC LLC Printedin the U.S.A.
This document in other languages
- español: Craftsman 917.28853