Download MTD 41M Specifications
Transcript
Safe Operation Practices • Set-Up • Operation • Maintenance • Service • Troubleshooting • Warranty L Push Mower m Model 41M MTD LLC, P.O. BOX 361131 CLEVELAND, OHiO 44136-0019 PrintedIn USA FormNo.769-03467B (March19,2008) 1 ToTheOwner ThankYou Thank you for purchasing a Lawn Mower manufactured by This product has met the rigid safety standards Power Equipment Institute and an independent MTD LLC. It was carefully engineered to provide excellent performance when properly operated and maintained. Please read this entire manual It instructs maintain laboratory. or contact and the machine, carefully follow product in this manual information the Throughout machine at the time of printing. The engine available Review to all models. are observed Support all references manufacturer is responsible telephone address can be found satisfaction on at all to right and left side of the from the operating issues with regards to performance, position for all engine-related power-rating, specifications, warranty and service. Please refer to the engine manufacturer's Owner's/Operator's Manual, packed separately with your Manual may cover a range of product specifications for various models. Characteristics and features discussed and/or illustrated may not be applicable MTD's Customer address and mailing this manual, is relative to the most recent this manual frequently to familiarize yourself with the machine, its features and operation. Please be aware that this Operator's in this manual website concerning MTD service dealer this page. We want to ensure your complete times. recommended safety practices at all times. Failure to do so could result in personal injury or property damage. All information or questions phone your local authorized us directly. numbers, Please be sure that you, and any other who will operate If you have any problems the machine, the equipment. you how to safely and easily set up, operate your machine. persons prior to operating of the Outdoor testing machine, for more information. MTD LLC reserves the right to change product specifications, designs and equipment without notice and without incurring obligation. Table of Contents Safe Operation Practices ........................................ 3 Assembly & Set-Up .................................................. Controls & Features ................................................ 8 11 Opera don ................................................................ Maintenance &Adjustment. ................................. Service ..................................................................... Troubleshooting Engine Operation up and operating ................................................... 17 12 19 24 13 15 Warranty ................................................................ 30 Spanish .................................................................... 31 information model in the provided plate by standing MODEL NUMBER your new equipment, locate the model plate on the equipment DIqFIIqFIIqFIIqFIIqD please and record the area to the right. You can locate the at the operator's position and looking SERIALNUMBER down at the rear of the deck. This information will be necessary, should you seek technical support via our web site, Customer Support Department, 16 Engine Maintenance .............................................. Illustrated Parts List .............................................. RecordProductInformation Before setting ..................................................... or with a local authorized DIqFllqFllqFllqNIqD service dealer. CustomerSupport Please do NOT return If you have difficulty this machine, the machine assembling to the retailer this product you can seek help from Visit us on the web at www.mtdproducts.com 0 Call a Customer 0 Write Support Representative without or have any questions the experts. 0 or dealer Choose from at (800) 800-7:310 us at MTD LLC • RO. Box :3611:31 • Cleveland, first contacting regarding the options the controls, below: or (330) 220-468:3 OH • 441:36-0019 our Customer operation, Support Department. or maintenance of 2 importantSafeOperationPractices WARNING: This symbol could endanger all instructions points out important the personal safety and/or in this manual with these instructions before property attempting may result in personal When you see this symbol. safety instructions of yourself to operate which, if not followed, and others. this machine. Read and follow Failure to comply injury. HEED ITS WARNING! CALIFORNIA PROPOSITION 65 WARNING: Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to State of California to cause cancer and birth defects or other reproductive ,A WARNING: Battery compounds, harm. posts, terminals, chemicals known and related to the State of California this manual. operator was built to be operated As with any type of power result in serious injury equipment, objects. 6. operation. Keep this manual reference 3. This machine Therefore, personal and the proper use exercise extreme has been designed caution to perform 8. at all fingers, hands, could inspect the area where the equipment is to be which one job: Plan your mowing by an adult. should who are familiar be allowed material to use this or a thrown zone behind to ricochet object back injury, handles and keep children, and pets at least 75 feet from Stop machine if anyone mower enters area. Always wear safety glasses or safety goggles during operation and while performing an adjustment or repair your eyes. Thrown objects which ricochet can to the eyes. Wear sturdy, rough-soled work shoes and close-fitting slacks and shirts. Shirts and pants that cover the arms and legs and steel-toed operate weight 11. against a wall or obstruction, To help avoid blade contact helpers of material and the like. Also, material cause serious injury with these can cause serious to avoid discharge bystanders which may cause discharged toward the operator. to protect 10. individuals pattern roads, sidewalks, while it is in operation. 9. over or picked up objects injury. bystanders, purpose. could be tripped by the blade. Thrown stay in operator the instructions and safe operation practices in this manual and on the machine and should be trained and supervised rules of safe operation machine. of amputating safety instructions objects, and thrown toward Never allow children under 14 years of age to operate this machine. Children 14 and over should read and understand Only responsible Thoroughly foreign 7. piece of power equipment, to mow grass. Do not use it for any other 5. or error on the part of the the following avoid discharging Be completely familiar with the controls of this machine before operating it. is a precision in a safe and for ordering 2. times. This machine in used. Remove all stones, sticks, wire, bones, toys and other place for future and regular replacement parts not a plaything. is capable practices or death. Read this operator's manual carefully in its entirety before attempting to assemble this machine. Read, understand, and follow all instructions on the machine and in the before to the safe operation carelessness Failure to observe GeneralOperation 4. lead and lead to cause cancer and reproductive according can result in serious injury. This machine toes and feet and throwing manuals) contain harm. Wash hands after handling. DANGER: This machine 1. accessories this machine shoes are recommended. or light- (e.g. canvas) shoes. Do not put hands or feet near rotating cutting Never in bare feet, sandals, slippery deck. Contact hands, toes and feet. parts or under the with blade can amputate fingers, 12. Amissing ordamaged discharge cover cancause blade contact orthrown object injuries. 13. Many injuries occur asaresult ofthemower beingpulled overthefootduring afallcaused byslipping ortripping. Donotholdontothemower ifyouarefalling; release the handle immediately. 14. Never pullthemower back toward youwhileyouare walking. Ifyoumustback themower away fromawallor obstruction firstlookdownandbehind toavoid tripping andthenfollowthese steps: a. Stepback frommower tofullyextend yourarms. b. Besureyouarewellbalanced withsure footing. c. Pullthemower backslowly, nomore thanhalfway toward you. d. Repeat these steps asneeded. 15. Do not operate alcohol 16. while under the influence while The blade control starting handle to bypass its operation. inoperative mechanism (kickback) 28. injury through If you feel you are losing your footing, blade control handle immediately rotating within three seconds. Mow only in daylight run. 20. Stop the blade when crossing gravel drives, walks or roads. 21. If the equipment should start to vibrate abnormally, stop the engine and check immediately for the cause. Vibration is generally a warning of trouble. 23. Never operate mower without proper trail shield, discharge cover, grass catcher, blade control handle or other safety protective devices in place and working. Never operate mower with damaged safety devices. Failure to do so can result in personal injury. 24. Muffler and engine become hot and can cause a burn. Do not touch. 25. Never attempt adjustment 26. to make a wheel or cutting while height the engine is running. the manufacturer. made for this machine Failure to do so can result in personal injury. 4 I Mow across extreme Watch the face of slopes; caution SECTION 2 -- IMPORTANT SAFE OPERATION PRACTICES when for holes, which can cause obstacles. never changing ruts, rocks, by on a sloped or serious personal up and down. direction hidden Exercise on slopes. objects, or bumps you to slip or trip. Tall grass can hide Always be sure of your footing. A slip and fall can cause injury. If you feel you are losing your handle immediately three (3) seconds. and Do Not: 1. Do not mow near drop-offs, ditches or embankments, you could lose your footing or balance. 2. Do not mow slopes greater than 15 degrees as shown on the slope gauge. 3. Do not mow on wet grass. Unstable footing could cause slipping. Children Tragic accidents presence can occur if the operator of children. and the mowing They do not understand Never assume that children 1. Keep children is not alert to the Children are often attracted activity. to the mower the dangers. will remain where you last saw them. out of the mowing care of a responsible area and under watchful adult other than the operator. 2. Be alert and turn mower 3. Before and while moving down for small children. 4. Use extreme care when approaching blind corners, doorways, shrubs, trees, or other objects that may obscure your vision of a child who may run into the mower. 5. Keep children away from hot or running suffer burns from a hot muffler. 6. Never allow children under 14 years of age to operate this machine. Children 14 and over should read and understand the instructions Only use parts and accessories this machine Do: light. Walk, never Shut the engine off and wait until the blade comes to a complete stop before removing the grass catcher or unclogging the chute. The cutting blade continues to rotate for a few seconds after the blade control is released. Never place any part of the body in the blade area until you are sure the blade has stopped rotating. which on slopes requires extra balance, release the blade control the blade will stop rotating within release the in this manual, hilly area. If the slope is greater than 15 degrees, do not mow it. 3. 19. 22. are not covered measure slopes before operating and the blade will stop or good artificial occur which faster than bruises or sprains caution. If you feel uneasy on a slope, do not mow it. For your safety, use the slope gauge included as part of this manual to handle Never operate the mower in wet grass. Always be sure of your footing. A slip and fall can cause serious personal injury. If situations can result in severe injury. Operation must operate easily in both directions and automatically return to the disengaged position when released. 18. of starter cord Slopes are a major factor related to slip and fall accidents, is a safety device. Never attempt blade. The blade control Rapid retraction will pull hand and arm toward engine Slope Operation 2. and may result in personal pull cord slowly until resistance use care and good judgement. Contact Customer Support for assistance or the name of the nearest service dealer. Doing so makes the safety device with the rotating engine, you can let go. Broken bones, fractures, could result. on machines engine. When starting is felt, then pull rapidly. 1. Do not engage the self-propelled contact of or drugs. so equipped 17. the mower 27. off if a child enters the area. backwards, and safe operation and on the machine adult. and be trained look behind and engines. practices They can in this manual and supervised by an Service 3. Check the blade and engine intervals To avoid personal care in handling injury or property damage gasoline. Gasoline is extremely can ignite. Wash your skin and change flammable clothes original 3. Use only an approved Never fill containers gasoline container. inside a vehicle 4. Remove gas-powered equipment Keep all nuts, bolts, and screws tight equipment 7. trailer and refuel it on the ground. If this is not possible, then refuel such equipment on a trailer with a portable container, 5. rather than from a gasoline Keep the nozzle in contact container opening at all times not use a nozzle lock-open 6. Extinguish of ignition. all cigarettes, dispenser until fueling below of filler neck to provide bottom no more than I inch heater, furnace, or fuel container clothes dryer or other To reduce fire hazard, keep machine or other debris build-up. near an open discharge cover, and trail shield could expose to be thrown. check components For safety and replace do not meet the original equipment performance specifications and compromise gas appliances. 11. Clean up oil or fuel spillage Engine exhaust and deadly contains before safe Check fuel line, tank, cap, and fittings frequently for cracks 12. Do not crank engine with spark plug removed. 13. Maintain or replace safety and instruction labels, as Observe proper disposal laws and regulations. Improper disposal of fluids and materials can harm the environment. To avoid serious injury or death, do not modify with the governor setting engine in any can lead to a runaway engine and cause it to operate at unsafe speeds. Never tamper with factory governor. setting of engine an odorless Notice Regarding Emissions repairing, blade and all moving starting. or inspecting, parts have stopped. spark plug wire and ground unintended monoxide, area. gas. Before cleaning, or over-speed and storing. or in a poorly ventilated carbon setting the maximum speed of the engine. way. Tampering indoors governor controls Donot modify engine to cool at least 5 minutes Never run an engine the engine's The governor or leaks. Replace if necessary. 14. free of grass, leaves, any fuel soaked debris. machine Do not change necessary. GeneralService: 2. frequently the engine. securely. engine. Never store the machine 10. flame, spark or pilot light as on a water heater, space I. components, parts or allow objects operating If gasoline is spilled, wipe it off the engine and equipment. Move machine to another area. Wait 5 minutes before Allow height the engine is running. may lead to improper for fuel expansion. 1I. 14. Repair the the mower. safety!" fuel tank. Filltankto remove for any damage. and operating to make a wheel or cutting while Grass catcher which before Replace gasoline cap and tighten 13. Never attempt starting immediately with original equipment manufacturer's (O.E.M.) parts only, listed in this manual. "Use of parts is hot or I0. 12. inspect the mower before protection, vapors will Allow engine to cool at least two minutes Never overfill starting After striking a foreign object, stop the engine, disconnect the spark plug wire and ground against the engine. moving Never remove gas cap or add fuel while engine with safety devices. Check their proper are subject to wear and damage which cigars, pipes and other sources because flammable to be sure the condition. regularly. adjustment 9. 8. 9. 8. Do device. Never fuel machine indoors accumulate in the area. running. refueling. Never tamper damage nozzle. is complete. 7. is in safe working Thoroughly with the rim of the fuel tank or may lead to improper safety!" 5. operation from the truck or specifications and compromise Mower blades are sharp and can cut. Wrap the blade or wear gloves, and use extra caution when servicing them. 6. on the blade 4. or on a truck or trailer bed with a plastic liner. Always place containers ground away from your vehicle before filling. equipment performance immediately. 2. inspect Replace blade with the original equipment manufacture's (O.E.M.) blade only, listed in this manual. "Use of parts which do not meet the use extreme and the vapors are explosive. Serious personal injury can occur when gasoline is spilled on yourself or your clothes, which bolts at frequent Also, visually for damage (e.g., bent, cracked, worn) SafeHandling Of Gas01ine: I. mounting for proper tightness. make certain the Disconnect the against the engine to prevent Engines which EPA emission are certified regulations to comply with California and federal for SORE (Small Off Road Equipment) are certified to operate may include the following on regular emission unleaded control gasoline, and systems: Engine Modification (EM), Oxidizing Catalyst (OC), Secondary Air Injection (SAI) and Three Way Catalyst (TWC) if so equipped. SECTION 2 -- IMPORTANT SAFE OPERATION PRACTICES S SparkArrestor AverageUsefulLife According iAil_i Products Safety Commission (CPSC) and the U.S. Environmental Protection Agency (EPA), this product has an Average Useful Life of seven (7) years, or 140 exhaust system is equipped meeting applicable a new machine or have the machine inspected annually by an authorized service dealer to ensure that all mechanical and with a spark arrester local or state laws (if any). If a spark arrester is used, it should effective to the Consumer internal combustion engine and should not be used WARNING: machine isforest-covered, equipped with brush an on or near anyThis unimproved covered or grass-covered land unless the engine's working order by the operator. the above is required be maintained in In the State of California hours of operation. At the end of the Average Useful Life, buy safety systems are working properly and not worn excessively. Failure to do so can result in accidents, injuries or death. by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark attester for the muffler is available through your nearest engine authorized service dealer or contact the service department, RO. Box 361131 Cleveland, WARNING: follow Ohio 44136-0019. Your Responsibility--Restrict the warnings and instructions the use of this power machine to persons in this manual and on the machine. SAVETHESEINSTRUCTIONS! 6 I SECTION 2 -- IMPORTANT SAFE OPERATION PRACTICES who read, understand and or a corner of a building... Iv Z 0 0 !-Z Q. I ¢N Z o I- ! | 15 ° Usethis page as a guide to determine slopes where you may not operate safely, WARNING: Do not operate (a rise of approximately mowers up and down up and down slopes. your lawn mower on such slopes. Do not mow on inclines with a slope in excess of 15 degrees 2-1/2 feet every 10 feet). A riding mower could overturn slopes, never across the face of slopes. Operate walk-behind and cause serious injury. Operate mowers riding across the face of slopes, never 3 Assembly& Set-Up Contents of Carton One Lawn Mower One Lawn Mower One Grass Catcher One Hardware Assembly gasoline or oil in the engine. Fill up gasoline and oil as instructed in the accompanying manual BEFORE operating your mower. hole on the handle mounting pack into the bracket. Secure with one plastic wing nut, also included in the hardware pack. See Fig. 3-2. Repeat on other side with remaining items engine Handle of Oil Insert a carriage bolt from the hardware upper without One Bottle Manual Pack 2. NOTE:This unit is shipped 1. Operator's from hardware pack. F Remove any packing material upper and lower handles. a. which Pull up and back on upper may be between Hardware Carriage handle as shown in Fig. 3-1. Make certain the lower handle is seated securely into the handle mounting brackets. cable while lifting the handle up. Do not crimp Wing Nuts (2) Figure 3-2 Figure 3-1 b. Tighten handle. properly star knobs to secure upper handle to lower Make sure that each carriage bolt is seated in the handle. Pack Bolts (2) 3_ The ropeguideisattachedtothe rightsideofthe See Fig. 3-3. Loosen the wing nut which upperhandle. GrassCatcher secures the rope Followsteps guide. belowtoassemblethegrasscatcher.Makecertain bag is turned right side out before label will be on the outside). assembling (warning a. Place bag over fra me so that its black plastic side is at the bottom. b. Slip plastic channel of grass bag over hooks on the frame. See Fig. 3-5. All the plastic channels except center top of bag attach from outside of bag. f Figure 4_ 3-3 a. Hold blade control against upper b. Pullstarterropeoutoftheengine.Release c. Slip starter d. Tighten bladecontrol. rope into rope guide. wing nut. Insert post on cable tie into hole provided handle. handle. Figure on the lower 3-5 Pull cable tie tight and trim excess. See Fig. 3-4. c. Attach center top of bag from inside of bag. ( Figure 3-4 SECTION 3 -- ASSEMBLY& SET-UP 9 2_ Follow the steps below to attach the grass catcher: a. Lift rear discharge Adjustments door. See Fig. 3-6. Each wheel has a height adjustment height lever to change the cutting of the mower. 1. Depress height adjustment 2. Slide lever to desired height. lever towards position wheel. for a change in cutting See Fig. 3-7. \ \ Figure 3-6 b. Place grass catcher discharge on the pivot rod. Let go of door so that it rests on the grass catcher. J To remove grass catcher, lift rear discharge door on the mower. Lift grass catcher up and out, off of the pivot rod. Release rear discharge door to allow it to close rear opening Figure 3-7 of mower. 3. WARNING: Never operate mower on the grass catcher are firmly rod and the rear discharge Release lever towards deck. unless the hooks IMPORTANT:All wheels must be placed in the same relative position. For rough or uneven lawns, move the seated on the pivot door rests firmly against height adjustment top of the grass catcher. scalping lever to a higher position. This will stop of grass. Gasand Oil Fill-Up Refer to the Engine Operation additional engine section in this manual for information. 1. Add oil provided box. before starting 2_ Service the engine with gasoline as instructed Operation of this manual. section WARNING: unitforthe Use extreme firsttimeoutofthe care when in the Engine handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Never fuel the machine indoors or while Extinguish the engine cigarettes, sources of ignition. SECTION 3 -- ASSEMBLY& SET-UP is hot or running. cigars, pipes and other 4 Controls and Features Control J Figure 4-1 BladeControl RecoUStarter The blade control is attached to the upper handle of the mower. Depress and squeeze it against the upper handle to operate the The recoil starter is attached to the right upper handle. Stand behind the unit and pull the recoil starter rope to start the unit. unit. Release it to stop engine and blade. _ Never attempt to bypass its operations. ARNING: This blade control is a safety device. ChokeControl The choke control when activated, aids in starting is located on the left side of the handle and closes the choke plate on the carburetor the engine. Pull the choke control and to activate Cutting HeightAdjustmentLever choke on the engine. Use of the choke may not be necessary the engine is warm or the air temperature is high. One adjustment lever is located on each wheel and is used to adjust the cutting height. All four levers have to be at the same GrassCatcher relative position to ensure a uniform height, refer to the "Assembly cut. To adjust the cutting & Set-Up" Section. the if The grass catcher, located at the rear of the mower, is used to bag the grass clippings for disposal at another site. Once the bag is full, it has to be removed any further from the mower and emptied before mowing. 11 Operation Starting Engine WARNING: Be sure no one other than the operator is standing near the lawn mower while starting engine or operating mower. Never run engine indoors or in enclosed, poorly ventilated areas. Engine exhaust contains carbon monoxide, an odorless and deadly gas. Keep hands, feet, hair and loose clothing away from any moving parts on engine and lawn mower. 1. Pull out the choke knob located on the left side of the upper handle. See Fig. 5-1. NOTE: Use of the choke may not be necessary if the engine is warm or the air temperature is high. 2. Standing behind the mower, squeeze and hold the blade control against upper handle. 3. Pull the recoil starter lightly until resistance is felt, then pull rapidly to overcome compression, prevent kickback, and start the engine. Repeat if necessary. See Fig.5-1. NOTE: Do not allow the recoil starter to snap back against the rope guide. 4. When engine warms up, push in the choke knob. UsingGrassCatcher Stopping Engine 1. Figure S-1 Release blade control to stop the engine and blade. You can use the grass catcher to collect operating the mower. 1. Attach grass catcher "Assembly before performing any work on to thestop mower or to WARNING: Wait for the blade completely remove the grass catcher. i_ UsingYourlawn Mower Be sure lawn is clear of stones, sticks, wire, or other objects which could damage be accidently lawn mower thrown serious personal by the mower or engine. safety glasses while operating any adjustments will Operate 2. Stop engine completely by releasing the blade control. Make sure that the unit has come to a complete stop. 3. Lift discharge the mower and cause clippings door and pull grass bag up and away from to remove the bag. Dispose of the grass and reinstall the bag when complete. and others. result in foreign objects being thrown into the eyes, WARNING: The operation any lawnAlways mower wear can which can damage your eyesofseverely. performing you are in the & Set-Up" section. Grass clippings engine. _ instructions while automatically collect in bag as you run mower. mower till grass bag is full. Such objects could in any direction injury to the operator following clippings the mower, or while or repairs on it. _ Remove wire from the spark plug, thoroughly ARNING: inspect If you strike mowera foreign for any damage, object, stop andthe repair damage before Extensive vibration indication inspected restarting of mower and operating. during of damage. The unit should and repaired. operation is an be promptly Maintenance& Adjustments Maintenance 4_ Follow the Engine Maintenance schedule General Recommendations Always observe maintenance. performing any Clean underside on this lawn mower does not cover items that have been subjected to operator abuse or negligence. To receive full value from warranty, operator must maintain the lawn mower as instructed here. Changing of engine-governed Periodically should lubrication. speed will void engine of the mower of grass clippings deck after each use to prevent or other debris. Follow steps below for this job. 1. Disconnect mower 2. spark plug wire. Drain gasoline from lawn or place a piece of plastic under the gas cap. Tip mower so that it rests on the housing. with the air cleaner wa rra nty. All adjustments season. section for lubrication for engine DeckCare safety rules when build-up The warranty and instruction facing Keep the side up. Hold mower firmly. be checked at least once each any direction _ check all fasteners and make sure these are tight. 3. and do not leave the mower tipped for tip can the drain mowerintomore ° in anyARNING: length of Never time. Oil the than upper90 part of the engine causing a starting problem. Scrape and clean the underside of the deck with a suitable tool. Do not spray with water. plug, and ground against performing WARNING: Always stop engine engine, before disconnect spark any type of maintenance on your machine. i_ IMPORTANT: Do not use a pressure washer or garden hose to clean your unit. These may cause damage to the engine. The use of water will result in shortened life and reduce Lubrication serviceability. 1. Lubricate pivot points on the blade control a season with light oil. This control both directions. See Fig. 6-1. 2. Lubricate motor the wheels oil). If wheels at least once must operate freely in Put the mower back on its wheels on the ground. Ifyou had put plastic under the gas cap earlier, make sure to remove it now. at least once a season with light oil (or are removed for any reason, lubricate surface of the pivot arm and inner surface of the wheel with light oil. See Fig. 6-1. 3. 4. Lubricate the torsion discharge door periodically springs and pivot points on the rear with light oil to prevent See Fig. 6-1. rust. Engine Care NOTE: Refer to the Engine Operation and Maintenance in this manual for detailed instructions. Maintain sections oil level. Service air cleaner every 25 hours under normal Clean every few hours under extremely conditions. dusty conditions. Clean spark plug and reset the gap once a season. Clean engine regularly with a cloth or brush. Keep the area around the top of the engine clean to permit proper air circulation. Remove all grass, dirt, and combustible from muffler area. debris Figure 6-1 13 £epladng RearRap 1. To remove rear flap, lift rear door, and press flap in on either side to remove from hole. See Fig. 6-2. 2. Remove flap from opposite hole and replace with new flap in the opposite order and manner of removal. Figure 6=2 SECTION 6-- MAINTENANCE & ADJUSTMENTS 7 Service BladeCare WARNING: sharpening When removing or replacement, the cutting protect blade for your hands with a pair of heavy gloves or use a heavy rag to hold the blade. Periodically inspect the blade adapter strike a foreign object. Replace when below for blade service. 1. for cracks, especially necessary. 5. if you the engine part number) Remove the bolt and the blade bell support which operating See Fig. 7-1. faces the ground position. and the inner surface of when the mower is in the Make sure that the blade is aligned seated on the blade adapter Place blade bell support on the blade. Align notches blade bell support with small holes in blade. 7. Replace hex bolt and tighten rain., 600 in. Ibs. max. To ensure safe operation blade bolt for correct and flanges. 6. hold the to the engine crankshaft. crankshaft with light oil. Slide the blade adapter onto the engine crankshaft. Place the blade on the adapter such that the side of the blade marked "Bottom" (or with Disconnect spark plug boot from spark plug. Turn mower on its side making sure that the air filter and the carburetor blade and the blade adapter Lubricate the blade adapter Follow the steps are facing up. 2. excessive vibration when rotating at high speeds. It WARNING: An unbalanced will cause may cause damage to mower blade and could break causing personal injury. i_ll_lhlill hex bolt to torque: of your mower, periodically on the 450 in. Ibs. check the torque. Off-SeasonStorage The following steps should be taken to prepare your lawn mower for storage. Clean and lubricate mower lubrication instructions. thoroughly Do not use a pressure washer or garden unit. Coat mower's cutting as described in the hose to clean your blade with chassis grease to prevent rusting. Store mower in a dry, clean area. Do not store next to corrosive materials, such as fertilizer. When storing J any type of power equipment ventilated or metal storage rust-proof the equipment. shed, care should in a poorly be taken to Using a light oil or silicone, equipment, especially cables and all moving mower before storage. coat the parts of your lawn Figure 7-1 3. Remove blade and adapter 7-1. from the crankshaft. See Fig. 4. Remove blade from the adapter for testing balance. Balance the blade on a round shaft screwdriver to check. Remove metal from the heavy side until it balances evenly. When sharpening the blade, follow grind. Grind each cutting balanced. the original edge equally angle of to keep the blade 15 Troubleshooting Problem Engine Fails to start Cause 1. Remedy 1. Engage blade control. Blade control disengaged. 2. Spark plug boot disconnected. 2. Connect wire to spark boot. 3. Fuel tank empty or stale fuel. 3. Fill tank with clean, fresh gasoline. 4. Engine not primed (if equipped with primer). 4. Prime engine as instructed in the Operation section. 5. Faulty spark plug. 5. Clean, adjust gap, or replace. 6. Blocked 6. Clean fuel line. 7. Engine fuel line. 7. Wait a few minutes to restart, but do not flooded. prime. 8. Fuel valve (if equipped) 9. Engine runs erratic Engine not choked closed. (if equipped 8. Open fuel valve. See engine manual. with choke). 9. Choke engine. See engine manual. 1. Spark plug boot loose. 1. Connect and tighten 2. Blocked fuel line or stale fuel. 2. Clean fuel line; fill tank with clean, fresh spark plug boot. gasoline. 3. Ventin 3. Clear vent. gas cap plugged. 4. Water or dirt in fuel system. 5, Dirty air cleaner. 6. Unit running applied. Engine overheats Occasional skips (hesitates) at 4. Drain fuel tank. Refill with fresh fuel. 5. Refer to engine manual. with CHOKE (if equipped) 6. Push CHOKE knob in. 1. Engine oil level low. 1. Fill crankcase with proper od. 2. Air flow restricted. 2. Clean area around 1. Spark plug gap too close. 1. Adjust gap to .030". 1. Spark plug fouled, faulty, or gap too wide. 1. Reset gap to .030" or replace 2. Dirty air cleaner. 2. Refer to engine 1. Cutting 1. Tighten and on top of engine. high speed Idles poorly Excessive Vibration blade loose or unbalanced. 2. Bent cutting Mower will not blade manual. and adapter. 2. See an authorized blade. spark plug. service Balance blade. dealer. 1. Wet grass. 1. Do not mow when grass is wet; wait until later to cut. 2. Excessively high grass. 2. mulch grass Mow once at a high cutting height, then mow again at desired height or make a narrower cutting path. 3. Dull blade. Uneven cut 1. Wheels not positioned 3. Sharpen or replace blade. correctly. 1. Place all four wheels in same height (if equipped 2. Dull blade. '°1 with individual 2. Sharpen or replace blade. posttion height adjusters). EngineOperation Fuel Cap \ Air Cleaner Grip Cap Oil Drain Spark Plug Mumer Pre-OperationCheck Oil Recommendations NOTE:This engine is shipped engine. Running the engine serious engine damage Before starting without with insufficient engine, is about 20 oz. Use a 4-stroke, or an equivalent motor oil certified 20 Oil mlmlllm Iilmllm high detergent, SG/SF. on the for general, all temperature in your area from m,3o premium U.S. automobile oil is used, select the appropriate average temperature m__ fill with oil. Do not over-fill. to meet or exceed SAE 10W-30 is recommended 20w oil can cause manufacturer's requirements for service classification Motor oils classified SG/SF will show this designation container. single viscosity _ or oil in the and void the engine warranty. capacity quality gasoline viscosity 2ow4o, _ow5o_____ I 15w40, O_____m/b. use. If for the Q the chart to the right. lOW40 Iilmmmmlll ml_lmmlmmmmmm I v lOw30_____u (°C)-30 ° -20 ° -10 ° 0 ° (°F)-20 ° 0° Ambient 1. Single Viscosity 2. Multi Viscosity 20o 10° 40o 20 o 30 o 40 o 60 o 80 o 100 o Temperature NOTE: Using non detergent oil or 2-stroke engine shorten the engine's service life. oil could 17 CheckOil Level CheckFuel Level NOTE: Be sure to check the engine on a level surface with the 1. Clean around 2. Fill tank to approximately engine stopped. 1. Remove the oil filler cap and wipe the dipstick Fig. 10-2. clean. See fuel fill before neck to allow removing 1-inch below for fuel expansion. NOTE: Before refueling, cap to fuel. lowest portion of Be careful not to overfill. allow engine to cool 2 minutes. Starting TheEngine equipment not and use feet a pressurized ARNING: moving Always parts. keep Do hands clear of starting fluid. Vapors are flammable. _ 1. Pull out the choke knob located upper handle. on the left side of the See Fig. 10-3. \\ \\ \\ Figure 10=2 2. Insert the dipstick itin. 3. If the level is low, slowly add oil to the upper limit on the 4. into the oil filler dipstick. See Fig. 10-2 inset. Tighten dipstick firmly neck, but do not screw before starting engine. NOTE: Do not overfill. Overfilling with oil may cause smoking, hard starting, spark plug fouling, or oil saturation of air cleaner. NOTE: Use of the choke may not be necessary is warm or the air temperature is high. Fuel Recommendations Use automotive combustion gasoline chamber (unleaded deposits) or low leaded to minimize with a minimum Gasoline with up to 10% ethanol 2. or 15% MTBE (Methyl Butyl Ether) can be used. Never use an oil/gasoline Tertiary mixture, gasoline, or gasoline over 30 days old. Avoid getting water in the fuel tank. DO NOT USE E85 GASOLINE. Standing behind the mower, depress handle and hold it against the upper of 87 octane. 3. dirty Pull the starter rapidly dirt, dust, or grip lightly to overcome start engine. ventilated flammable and is Refuel in a well- area with the engine stopped. Do not the rope guide. Return it gently starter. 4. smoke or allow flames or sparks in the area where the engine is refueled or where gasoline Avoid repeated or prolonged breathing of va pot. WARNING: should Do not overfill be no fuel in the filler contact the fuel tank (there neck). After refueling, make sure the tank cap is closed properly and securely. Be careful not to spill fuel when refueling. Spilled fuel or fuel vapor may ignite. If any fuel is spilled, make sure the area is dry before starting the engine. SECTION 9 -- ENGINE OPERATION When engine warms 10-3. StoppingTheEngine 1. is felt, then pull kickback, and grip to snap back against to prevent damage to the up, push in the choke knob. See Fig. is stored. with skin or prevent Repeat if necessary. See Fig. 10-3. NOTE: Do not allow the starter WARNING: Gasoline is extremely explosive under certain conditions. the blade control handle. until resistance compression, if the engine Release the blade control. 1 EngineMaintenance Periodic any maintenance. To prevent accidental ARNING: the Shut offthe disconnect spark plug engine boot. before _ inspection If engine must be tipped to transport of the engine is essential is to be maintained. Regular maintenance will also ensure a long service life. The required service intervals and the kind of maintenance to be performed are described IMPORTANT: and adjustment if high level performance start-up, performing equipment intervals, or to inspect or remove grass, keep spark plug side of engine in the table below. Follow the hourly or calendar whichever when operating up. Transporting or tipping engine spark plug down may cause smoking, hard starting, spark plug fouling, or oil saturation of air cleaner. _1 occur first. More frequent in adverse service is required conditions. muffler will be very hot. Be careful not to touch the WARNING: muffler. If the engine has been running, the MaintenanceSchedule FirstSHours Each Useor EveryS Hrs. EverySeason EverySeason EverySeason or 25 Hours or SOHours or 100Hours ,/ CheckEngineOil Level ChangeEngineOil ff _/ CheckAir Cleaner _/ M/ ServiceAir Cleanerf M/ CheckSparkPlug V/ ReplaceSparkPlug V/ CleanEngineShroud V/ Cleanaround muffler V/ ReplaceFuelFilter f Service more frequently ff Service Dates M/ when used in dusty areas. Every season or 25 hours if operating under heavy load or high ambient temperature. 19 AirCleanerService Oil Service Check oil level regularly. Paper filters cannot Be sure correct or every 100 operating dusty conditions. oil level is maintained. hours or daily before starting procedure in the Operation engine. Check every five See oil checking be cleaned and must be replaced section. solvents for cleaning thegasoline air cleaner element. A fire WARNING: Never use or low flash point or explosion could result. OilChange _ IMPORTANT: Be sure to check engine on a level surface with the engine stopped. Drain the oil while the engine is still warm to IMPORTANT: Never run the engine without engine wear will result. assure rapid and complete the air cleaner. Rapid draining. 1. 1. Remove all fuel from tank by running from lack of fuel. 2. Remove drain plug and allow oil to drain into a suitable container. once a year hours; more often if used in extremely engine until it stops Remove the wing bolt and the air cleaner the elements paper element element See Fig. 10-1. cover. Remove and separate them. See Fig. 10-2. Replace when or replace dirty or damaged. Clean foam when damaged. f Oil Fill Cap Foam Element Figure Figure 10-1 2. To clean foam element, separate it from the paper element and wash in liquid detergent drain oil, drainBefore fuel from tankengine by running engine WARNING: tipping or equipment until fuel tank is empty. i_ 3. Reinstall the drain plug and tighten 4. Refill with the recommended to it securely. oil (see Operation section) and check the oil level. See Fig. 10-1. 5. Reinstall the oil fill cap securely. IMPORTANT: Used motor left in contact with the skin for prolonged is unlikely oil may cause skin cancer if repeatedly periods. Although this unless you handle used oil on a daily basis, it is still advisable to thoroughly wash your hands with soap and water as soon as possible after handling used oil. NOTE: Please dispose of used motor compatible with the environment. oil in a manner that is We suggest you take it in a sealed container to your local service station for reclamation. not throw it in the trash or pour it on the ground. SECTION10-- ENGINE MAINTENANCE Do thoroughly before 10=2 and water. Allow to dry using. Do not oil the foam element. SparkPlugService 3_ Measure the plug gap with a feeler gauge. Correct as necessary by bending gap should plug removed. DODONOT NOT crankforengine WARNING: check spark _ be setto side electrode. See Fig. 10-4. The 0.030 in. with with spark spark plug removed. To ensure proper engine operation, properly and free of deposits. 1. gapped the spark plug must be Remove the spark plug boot and use a spark plug wrench Electrode to remove the plug. See Fig. 10-3. Spark Plug Figure 10-4 4_ Check that the spark plug washer is in good condition and thread threading. 5_ After the spark plug is seated, tighten wrench Figure the spark plug in by hand to prevent to compress cross- with a spark plug the washer. 10=3 NOTE:When installing a new spark plug, tighten 1/2 turn after the spark plug seats to compress the washer. When reinstalling a used spark plug, tighten 1/8-1/4 turn after the i_ 2. muffler will be hot. Behas careful to touchthe the WARNING: If very the engine been not running, muffler. Visually inspect the spark plug. Discard the spark plug if there is apparent chipped. reused. wear, or if the insulator is cracked or spark plug seats to compress IMPORTANT:The An improperly the washer. spark plug must be securely tightened. tightened and may damage spark plug can become very hot the engine. Clean the spark plug with a wire brush if it is to be SECTION10 -- ENGINE MAINTENANCE 21 Fuel Filter Service The fuel filter cannot Storage be cleaned year or every 100 operating gasoline. 1. 2. and must be replaced once a hours; more often if run with old Remove all fuel from tank by running from lack of fuel. engine Engines stored between until it stops in fuel system or on essential your engine deteriorates Remove c-clamp from fuel line and remove tank outlet. See Fig. 10-5. 30 and 90 days need to be treated with a gasoline stabilizer and engines stored over 90 days need to be drained of fuel to prevent deterioration and gum from forming fuel line from the carburetor, replaced. 1. carburetor during parts. If the gasoline and other fuel system components, Remove all fuel from tank by running from lack of fuel. _i ARNING: running. Change oil. See Oil Change section. 3. Remove spark plug and pour about 4. serviced or until it stops unattended while 1/2 an ounce of engine Replace spark plug and crank slowly to Clean debris from around under, around engine Never leave engine 2. oil into cylinder. distribute oil. in storage, you may need to have engine, and behind under finger muffler. guard, and Touch upany damaged paint, and coat other areas that may rust with a light film of oil. 5. Store in a clean, dry and well ventilated appliance that operates area away from any with a flame or pilot light, such as a furnace, water heater, or clothes dryer. Also avoid any area with a spark producing electric motor, or where power tools are operated. 6. Figure 10-5 If possible, also avoid storage because that promotes 3. Pull out old fuel filter from tank outlet. Replace when or damaged. 4. Grasp new fuel filter from shouldered completely 10-5 inset. 5. to the shoulder dirty end and insert it into the tank outlet. See Fig. If the engine engine. cleaning. Clean finger 1. Check your engine as described Check section of this manual. 2. If the fuel was drained Periodically remove dirt build-up muffler. from 3. IMPORTANT'. Do not spray engine with water to clean because washing equipment fuel. Using a garden hose or pressure can also force water into the air cleaner or muffler opening. Water in the air cleaner will soak the paper element, and water that passes through the element or muffler can enter the cylinder, causing damage. could cause aAccumulation fire. Inspect and clean before WARNING: of debris around every muffler use. SECTION10-- during ENGINE MAINTENANCE in the Pre-Operation storage preparation, If you keep a container fill the of gasoline starting. Clean with a air. contaminate can cause fuel or for refueling, make certain it contains only fresh fuel. Gasoline oxidizes and deteriorates over time, causing hard allow it to cool for at least half guard and around brush or compressed water could level in storage. Tilting tank with fresh gasoline. has been running, an hour before Keep the engine oil leakage. Removing FromStorage Replace fuel line and c-clamp. CleanEngine i_lk 7. areas with high humidity, rust and corrosion. If the cylinder preparation, is normal. was coated with oil during the engine will smoke briefly storage at startup. This The EZ Start Promise Provisions of Your Limited Warranty In addition to the other terms and conditions of the Limited Warranty applicable to your new mower, MTD LLC ("MTD") hereby warrants that your mower's engine will start on the first or second attempt by an able-bodied adult (subject to the limitations described below) for the duration of the manufacturer's limited warranty applicable to your product. If the engine on your mower fails to conform to this limited warranty, MTD will cover the cost of parts and labor associated with any adjustments and/or repairs necessary to return your engine to its warranted condition. In order to make a claim under these provisions of your warranty, you must bring the product and proof of purchase to an authorized MTD service provider. In many cases, the retailer who sold you your mower is not equipped to provide warranty service, so please locate the authorized service dealer nearest you by either calling the phone number provided in your Operators Manual or looking up an authorized service dealer on-line at www.mtdproducts. com. Items and Conditions Not Covered The EZStart Promise does not cover and/or apply to the following: • Cost of regular maintenance service or parts, such as filters, fuel, lubricants, oil changes, spark plugs, air filter, blade sharpening, worn blades, cable/linkage adjustments, or brake and clutch adjustments = Transportation costs to and from an authorized MTD service provider = Any engine used for commercial, rental, institutional, governmental, or non-residential applications = Any product or part that has been altered or misused or required replacement or repair due to misuse, accidents, or lack of proper maintenance • Repairs necessary due to improper battery care, electrical supply irregularities, or failure to properly prepare the mower prior to any period of non-use over three months = Pickup and/or delivery charges • Operational misuse, neglect, accidents, unauthorized repairs or attempted repairs of the engine or its components by anyone other than an authorized MTD service provider. GDO0-100163 Rev.B Repairs or adjustments to correct starting difficulties dueto any of the following: failure to follow proper maintenance procedures -- rotary mower blade striking an object -- contaminants in the fuel system --improper fuel or fuel/oil mixture (consult your Operator's Manual if in doubt) -- failure to drain the fuel system prior to any period of non-use over three months. . Any starting problem which results from the use of inappropriate fuels, lubricants, or additives. e Special conditions or circumstances that normally require more than two pulls to start, specifically: 1) First start-up following your initial purchase, 2) first time starts after extended period(s) of non-use over one month or seasonal storage, 3) cool temperature starts such as those found in early spring and late autumn, and 4) difficult starting that results from the operator's failure to follow the proper starting procedures identified in the Operator's Manual. If you are having difficulty starting your unit, please check the Operator's Manual to ensure that you are using the correct starting procedures. This can save an unnecessary visit to a Service Dealer. Owner Responsibilities You must maintain your mower (including its engine) by following the maintenance procedures and starting instructions described in the Operator's Manual. Such routine maintenance, whether performed by a dealer or by you, is at your expense. In addition, please retain your proof of purchase and service receipts as these may be required to validate a claim. General Conditions An authorized MTD service provider using approved replacement parts must perform all repairs covered by the EZ Start Promise. Repair by an MTD authorized service dealer is your sole remedy under this warranty. MTD is not liable for indirect, incidental, or consequential damages in connection with the use of the products covered by these warranties, including any cost or expense of providing substitute equipment or service during reasonable periods of malfunction or non-use pending completion of repairs under this warranty. Some states do not allow exclusions of incidental or consequential damages, or limitations on how long an implied warranty lasts, so certain exclusions and limitations may not apply to you. Model41M 42 \ 43 \ 41 _/12 \ 10 14 45 8 \ 19 2O 35 34 33 31 Model41M Ref I Part Number NO, 1. Description I 747-1161A Ref No, Part Number Description Blade Control 24. 782-5002B Front Baffle 748-0377C Blade Adapter, 2. 749-I092A Upper Handle 25. 3. 710-1205 Rope Guide 26. 742-0741 Mulch 4. 720-0279 Wing Nut, 1/4-20 27. 736-0524B Blade Bell Support 28. 710-1257 Screw, 3/8-24 x 2.50 #6 x 2.15 w/Star Blade 5. 710-1174 Carriage 6. 720-04072 Hand Star Knob 29. 712-04065 Flange Lock Nut, 3/8-16 7. 749-0928A Lower Handle 30. 787-01290A Height Adjustment 8. 712-0397 Wing Nut, 1/4-20 31. 687-02338 Pivot Arm Assy - RH 9. 746-04299 Control 687-02337 Pivot Arm Assy - LH 10. 726-0240 Cable Tie 32. 734-1988 Front Wheel, 7 x 1.8 11. 664-04007A Grass Bag 33. 738-04266 Scr., Shldr., .500 Dia. X .385 12. 747-04080A Grass Bag Frame 34. 732-0404 Spring Lever 13. 732-04089A Torsion Spring LH 35. 720-0426 Height Adjustment 14. 731-05642 Trailshield 36. 687-02333 Pivot Arm Assembly - RH 15. 747-04587 Rear Door Pivot Rod 687-02332 Pivot Arm Assembly - LH 16. 710-0654A TT Screw, 3/8-16 x 1 37. 732-04175 Spring Lever IZ 731-05865 Rear Discharge 38. 710-0703 Carriage 18. 731-04150C Rear Baffle 39. 734-1987 Rear Wheel, 8 x 1.8 19. 732-04090A Torsion Spring RH 40. 710-1652 Screw, 1/4-20 x .625 20. 710-1241 Screw, 1/4-15 x 1.00 41. 710-0606 Screw, 1/4-20 x 1.50 712-04064 Nut, Flglk., 1/4-20 Bolt, 5/16-18 x 2 Cable Door Knob Bolt, 1/4-20 21. 787-01276 Deck 21 inch 42. 22. 687-02271A Handle Bracket Assy - RH 43. 746-04239A Choke Cable 687-02270A Handle Bracket Assy - LH 44. 731-05400 Engine Shroud 687-02099B Hr. Adj. Assy. Frt- LH 45. 710-04577 Screw, Mach., M4-.7 687-02100B Hr. Adj. Assy. Frt- RH 23. Plate 25 EngineModel- 1P65MC 21- i D7 6 24 EngineModel- 1P65MC Ref NO. Part Number 1. 751-10438 Fuel Tank 2. 751-10841 Flywheel 3. 751-10840 Reed Valve Assembly 4. 751-10334 Oil Filler Tube Assembly 5. 751-10333 Dipstick Assembly 6. 751-10845 Cylinder Head Assembly 7. 751-10847 Short Block Assembly 8. 751-10320 Stop Switch and Brake Assembly 9. 751-10319 Recoil Spring and Pulley Assembly 10. 751-10314 Push Rod Kit 11. 751-10313 Valve Kit 12. 751-10370 Oil Drain Plug and Washer Assembly 13. 751-10367 Ignition 14. 751-10838 Carburetor 15. 751-10307 Flywheel 16. 751-10844 Air Cleaner Housing 17. 751-10304 Muffler 18. 751-10363 Fuel Line Kit- 19. 751-10358 Fuel Filter 20. 751-10440 Fuel Cap 21. 751-10299 Recoil Starter Assembly 22. 751-10298 Air Cleaner Kit 23. 751-10297 Air Cleaner Thumb 24. 751-10404 Muffler 25. 751-10774 Muffler 26. 751-10402 Muffler 27. 751-10387 Governor 28. 751-10292 Spark Plug 29. 751-10869 Roll Over Valve Assembly 30. 751-10443 Carbon 31. 751-10772 Spark Arrestor 752Z1P65MC Engine - Complete 751-10846 Cylinder 751-10839 Carburetor 751-10848 Gasket Kit - Complete 751-10849 Gasket Kit - External NOTE: Illustrated parts without Description a numeric Shroud Coil Assembly Key Assembly Complete Stud Assembly Inc. hoses, clamps &filter Screw Guard Gasket/Heat Shield Return Spring Cannister Head Service Kit call-out Kit - Major are not servicable components. 27 MTD CONSUMER GROUP (MTD), the California Air Resources Board (CARB) and the United States Environment Protection Agency (U. S. EPA) Emission Control System Warranty Statement (Owner's Defect Warranty Rights and Obligations) EMISSIONCONTROLSYSTEMCOVERAGEIS APPLICABLETOCERTIFIEDENGINESPURCHASEDiN CALIFORNIAIN 2005 ANDTHEREAFTER,WHICHARE USEDIN CALIFORNIA,ANDTO CERTIFIEDMODELYEAR2005 AND LATERENGINESWHICHARE PURCHASEDAND USEDELSEWHEREIN THE UNITEDSTATES. Californiaand elsewherein the UnitedStatesEmissionControlDefectsWarrantyCoverage The CaliforniaAir ResourcesBoard(CARB),U. S. EPAand MTDare pleasedto explaintheemissionscontrol systemwarrantyon your modelyear 2006 and latersmalloff-roadengine,in California,new smalloff-roadenginesmustbe designed,builtand equippedto meet theStatesanti-smog standards.Elsewherein the UnitedStates,newnon-road,spark-ignitionenginescertifiedfor model2005and later,mustmeet similarstandardsset forth by the U. S. EPA.MTDmustwarrantythe emissioncontrolsystemon yourenginefor the periodof time listed below,providedtherehasbeen no abuse,neglector impropermaintenanceof your smalloff-roadengine. Youremissioncontrolsystemmay includepartssuch as the carburetor,fuel-injectionsystem,the ignitionsystem,and catalyticconverter,fuel tanks,fuel lines,fuel caps,valves,canisters,filters, vaporhoses,clamps,connectors,and otherassociatedemission-relatedcomponents. Wherea warrantableconditionexists,MTDwill repairyoursmall off-roadengineat no cost to yourincludingdiagnosis,partsand labor. MANUFACTURER'S WARRANTY COVERAGE: This emissionscontrolsystemis warrantedfor two years,if anyemission-relatedpart on yourengine is defective,the part will be repairedor replacedby MTD. OWNER'S WARRANTY RESPONSIBILITIES: As the smalloff-roadengineowner,youare responsibleforthe performanceof the requiredmaintenancelisted in your Owner'sManual.MTD recommendsthat you retainall yourreceiptscoveringmaintenanceson yoursmalloff-roadengine,but MTDcan not denywarrantysolelyfor the lack of receiptsor foryour failureto ensurethe performanceto all scheduledmaintenance. As the smalloff-roadengineowner,youshouldhoweverbe awarethat MTDmaydenyyour warrantycoverageif yoursmall off-roadengine or part hasfaileddue toabuse, neglect,impropermaintenanceor unapprovedmodifications. Youare responsiblefor presentingyour smalloff-roadengineto an AuthorizedMTDServiceDealeras soonas a problemexists.Thewarranted repairsshouldbe completedin a reasonableamountof time,notto exceed30 days. If you haveanyquestionsregardingyourwarrantyrightsand responsibilities,you shouldcontacta MTDService Representativeat 1-800-800-7310 and addressis MTDCONSUMERGROUP,RO. Box361131,ClevelandOH,44136-0019. DEFECTS WARRANTY REQUIREMENTS FOR 1995 AND LATER SMALL OFF=ROAD ENGINES: This sectionappliesto 1995and later smalloff-roadengines.The warrantyperiodbeginson the datethe engineor equipmentis deliveredto an ultimatepurchaser. (a) GeneralEmissionsWarrantyCoverage MTDmustwarrantto the ultimatepurchaserand eachsubsequentpurchaserthat the engineis: (1) Designed,built,and equippedsoas to conformwith all applicableregulationsadoptedby the Air ResourcesBoardpursuantto its authorityin Chapters1 and 2,Part 5, Division26 of the Healthand SafetyCode; and (2) Freefrom defectsin materialsand workmanshipthat causethe failureof a warrantedpart to be identicalin all materialrespectsto the partas describedin theengine manufacturer'sapplicationfor certificationfora periodof two years. (b) The warrantyon emissions-relatedpartswill be interpretedas follows: (1) Anywarrantedpart that is not scheduledfor replacementas requiredmaintenancein the writteninstructionsrequiredby Subsection(c) mustbe warrantedfor the warrantyperioddefinedin Subsection(a)(2). If any such partfails duringthe periodof warrantycoverage,it mustbe repairedor replacedby MTDaccordingto Subsection(4) below.Anysuch part repairedor replacedunder thewarrantymustbe warrantedfor the remainingwarrantyperiod. (2) Any warrantedpartthat is scheduledonlyfor regularinspectionin the writteninstructionsrequiredby Subsection(c) must be warrantedfor thewarrantyperioddefinedin Subsection(a)(2).A statementin such writteninstructionsto the effectof "repairor replaceas necessary"will not reducethe periodof warrantycoverage.Anysuch part repairedor replacedunderwarrantymustbe warrantedforthe remainingwarranty period. (3) Anywarrantedpartthat whichis scheduledfor replacementas requiredmaintenancein the writteninstructionsrequiredby Subsection(c) mustbe warrantedfor the periodof time prior to the first scheduledreplacementpointforthat part. If the part fails priorto thefirst scheduled replacement,the part mustbe repairedor replacedby MTDaccordingto Subsection(4) below.Any suchpart repairedor replacedunder warrantymustbe warrantedfor the remainderof the period priorto the first scheduledreplacementpointfor the part. (4)Repair orreplacement ofanywarranted partunder thewarranty provisions ofthisarticle must beperformed atnocharge totheowner ata warranty station. (5)Notwithstanding theprovisions ofSubsection (4)above, warranty services orrepairs must beprovided atallMTD distribution centers that arefranchised toservice thesubject engines. (6)Theowner must notbecharged fordiagnostic laborthatleads tothedetermination thatawarranted partisinfactdefective, provided that suchdiagnostic workisperformed atawarranty station. (7)Theengine manufacturer isliable fordamages toother engine components proximately caused byafailure under warranty ofanywarranted part. (8)Throughout theengine's warranty period defined inSubsection (a)(2), MTD willmaintain a supply ofwarranted partssufficient tomeet the expected demand forsuchparts. (9)Anyreplacement partmaybeused intheperformance ofanywarranty maintenance orrepairs andmust beprovided without charge tothe owner. Suchusewillnotreduce thewarranty obligations ofMTD. (10)Add-on ormodified partsthatarenotexempted bytheAirResources Board maynotbeused. Theuseofanynon-exempted add-on or modified parts shallbegrounds fordisallowing awarranty claim made inaccordance withthisarticle. Theengine manufacturer shallnotbe liable under thisarticle towarrant failures ofwarranted partscaused bytheuseofnon-exempted add-on ormodified part. (c) MTDwill includea copy of the followingemissionwarrantyparts list with each newengine,usingthose portionsof the list applicableto the e__&gine. (1) FuelMeteringSystem • Coldstart enrichmentsystem(soft choke) ,,Carburetor andinternalparts • Fuel Pump • FuelTank (2) Air InductionSystem • Air cleaner • Intakemanifold (3) IgnitionSystem • Sparkplug(s) • MagnetoIgnitionSystem (4) ExhaustSystem Catalyticconverter • SAI (Reedvalve) (5) MiscellaneousItemsUsedin AboveSystem Vacuum,temperature, position,time sensitivevalvesand switches Connectorsand assemblies (6) Evaporativecontrol • Fuel Hosecertifiedfor ARBevaporativeemissionof 2006. • Fuel HoseClamps Tetheredfuel cap Carboncanister Vaporlines GD0C-100174Rev.A MANUFACTURER'S LiMiTED WARRANTY The limited warranty set forth below is given by MTD LLC with respect to new merchandise purchased and used in the United States and/or its territories and possessions, and by MTD Products Limited with respect to new merchandise purchased and used in Canadaand/ or its territories and possessions (either entity respectively, "MTD"). "MTD" warrants this product (excluding its Normal Wear Parts and Attachments as described below) against defects in material and workmanship for a period of two (2) years commencing on the date of original purchase and will, at its option, repair or replace, free of charge, any part found to be defective in materials or workmanship. This limited warranty shall only apply if this product has been operated and maintained in accordance with the Operator's Manual furnished with the product, and has not been subject to misuse, abuse, commercial use, neglect, accident, improper maintenance, alteration, vandalism, theft, fire, water, or damage because of other peril or natural disaster. Damage resulting from the installation or use of any part, accessory or attachment not approved by MTD for use with the product(s) covered by this manual will void your warranty as to any resulting damage. Normal Wear Parts are warranted to be free from defects in material and workmanship for a period of thirty (30) days from the date of purchase. Normal wear parts include, but are not limited to items such as: batteries, belts, blades, blade adapters, tines, grass bags, wheels, rider deck wheels, seats, snow thrower skid shoes, friction wheels, shave plates, auger spiral rubber, engine oil, air filters, spark plugs and tires. Attachments-- MTD warrants attachments for this product against defects in material and workmanship for a period of one (1) year, commencing on the date of the attachment's original purchase or lease. Attachments include, but are not limited to items such as: grass collectors and mulch kits. HOWTO OBTAINSERVICE:Warranty service is available, WITH PROOFOF PURCHASE,through your local authorized service dealer. To locate the dealer in your area: In the U.S.A. Check your Yellow Pages, or contact MTD LLC at RO. Box 361131, Cleveland, Ohio 44136-0019, or call 1-800-800-7310, 1-330-2204683 or log on to our Web site at www.mtdproducts.com. In Canada Contact MTD Products Limited, Kitchener, ON N2G4J1, or call 1-800668-1238 or log on to our Web site at www.mtdcanada.com. This limited warranty does not provide coverage in the following cases: a. FOR c. Service completed by someone other than an authorized service dealer. d. MTD does not extend any warranty for products sold or exported outside of the United States and/or Canada, and their respective possessions and territories, except those sold through MTD's authorized channels of export distribution. e. Replacement parts that are not genuine MTD parts. f. Transportation charges and service calls. g. MTD does not warrant this product for commercial use. No implied warranty, including any implied warranty of merchantability of fitness for a particular purpose, applies after the applicable period of express written warranty above as to the parts as identified. No other express warranty, whether written or oral, except as mentioned above, given by any person or entity, including a dealer or retailer, with respect to any product, shall bind MTD. Duringthe period of the warranty, the exclusive remedy is repair or replacement of the product as set forth above. The provisions as set forth in this warranty provide the sole and exclusive remedy arising from the sale. MTD shall not be liable for incidental or consequential loss or damage including, without limitation, expenses incurred for substitute or replacement lawn care services or for rental expenses to temporarily replace a warranted product. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. In no event shall recovery of any kind be greater than the amount of the purchase price of the product sold. Alteration of safety features of the product shall void this warranty. You assume the risk and liability for loss, damage, or injury to you and your property and/or to others and their property arising out of the misuse or inability to use the product. This limited warranty shall not extend to anyone other than the original purchaser or to the person for whom it was purchased as a gift. HOWSTATELAW RELATESTO THIS WARRANTY: This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. IMPORTANT: Owner must present Original Proof of Purchase to obtain warranty coverage. Log splitter pumps, valves, and cylinders havea separate oneyear warranty. b. Routine maintenance items such as lubricants, filters, blade sharpening, tune-ups, brake adjustments, clutch adjustments, deck adjustments, and normal deterioration of the exterior finish due to use or exposure. MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136=0019; Phone: 1=800=800=7310, 1=330=220=4683 MTD Canada Limited = KITCHENER, ON N2G 4J1; Phone 1=800=668=1238 GDOC-100016 REV. B Medidas importantes de seguridad • Configuraci6n • Funcionarniento Soluci6n de problemas • Garantia L • Mantenimiento • Servicio • L Podadora de Ernpuje m Modelo 411Vl MTD LLC, P.O. BOX 361131 CLEVELAND, OHiO 44136-0019 Impresoen EstadosUnidosdeAmerica FormularioNo.769-03467B (Marzo19,2007) A!propietario 1 Gracias Gracias por comprar una m_quina podadora fabricada por MTD LLC. La misma ha sido diseffada cuidadosamente para brindar excelente rendimiento si se la opera y mantiene correctamente. est_ndar sin previo aviso y sin generar responsabilidad obligaciones de ningOn tipo. Este producto cumple con las estrictas normas de seguridad del Outdoor Power Equipment Institute y de un laboratorio de pruebas independiente. Si tiene alg0n problema o duda respecto a la unidad, Ilame a un distribuidor de servicio MTD autorizado o p6ngase en contacto directamente con nosotros. Los n0meros de tel6fono, direcci6n del sitio web y direcci6n postal de la Asistencia al Cliente de MTD se encuentran en esta p_gina. Queremos garantizar su entera satisfacci6n en todo momento. Por favor lea todo este manual antes de operar el equipo. Le indica c6mo configurar, operar y mantener la m_quina con seguridad y f_cilmente. Por favor asegOrese de seguir cuidadosamente yen todo momento las pr_cticas de seguridad recomendadas, y hac_rselas seguir a cualquier otra persona que opere la m_quina. En caso de no hacerlo podrian producirse lesiones personales o daffos materiales. Toda la informaci6n contenida en este manual hace referencia En este manual, las referencias al lado derecho o izquierdo de la m_quina se observan desde la posici6n del operador. a la m_s reciente informaci6n de producto disponible en el momento de la impresi6n. Revise el manual frecuentemente para familiarizarse con la unidad, sus caracteristicas y funcionamiento. Por favor tenga en cuenta que este Manual del Operador puede cubrir una gama de especificaciones de productos de diferentes modelos. Las caracteristicas y funciones incluidas y/o ilustradas en este manual pueden no ser aplicables a todos los modelos. MTD se reserva el derecho de modificar las especificaciones de los productos, por El fabricante del motor esel responsable de todas las cuestiones relacionadas con el rendimiento, potencia de salida, especificaciones, garantia y mantenimiento del motor. Para obtener mayor informaci6n consulte el Manual del Propietario / Operador entregado por el fabricante del motor, que se envia, en un paquete por separado, junto con su unidad. los diseffos y el equipo indite Importante Medidas Ensamblado de seguridad.. 3 Servido ................................. 8 Solud6n importantes y Configuracidn .................................................................... de Problemas Controles y Caractefisticas .................................... Funcionamiento ..................................................... 11 12 Fundonamiento Mantenimiento 13 Piezas y Ajustes ....................................... Registrode informad6n de producto Antes de configura r y operar su equipo la placa del modelo el _rea situada a la derecha. la informaci6n Para encontrar en la placa de modelo, col6quese detr_s de la unidad en la posici6n del operador y mire hacia la parte inferior de la secci6n trasera del chasis. Si tiene que solicitar soporte t_cnico a trav_s de nuestro .......................................... de Motor de Motor de Reemplazo NOMERO nuevo, por favor Iocalice en el equipo y registre Muntenimiento 15 16 .................................... 18 ..................................... 20 ............................................ 24 DE MODELO EE EEEEEEEEE NOMERO DE SERIE sitio web, el Departamento de Asistencia al Cliente, o de un distribuidor servicio autorizado local, necesitar_ esta informaci6n. de SD 71FlT1FlT1FlT1FlT Asistendaal Cliente Por favor, NO devuelva la unidad al minorista o distribuidor Asistencia En caso de tener mantenimiento problemas para del mismo, puede Visite nuestro Llame a un representante Escribanos sitio web montar este solicitar producto la ayuda sin ponerse o de tener de expertos. en contacto dudas con respecto Elija entre las opdones en www.mtdproducts.com de Asistencia a MTD LLC • P.O. Box 361131 al Cliente • Cleveland, primero con el Departamento de al Cliente. al (800) 800-7310 OH • 44136-0019 6 (330) 220-4683 a los controles, que se presentan funcionamiento a continuaci6n: o 2 Medidasimportantesde seguridad ADVERTENCIA: La presencia de este s[mbolo indica que se trata de instrucciones importantes de seguridad que se deben respetar para evitar poner en peligro su seguridad personal y/o material y la de otras personas. Lea y siga todas las instrucciones de este manual antes de poner en funcionamiento esta m_quina. Si no respeta estas instrucciones puede provocar lesiones personales. Cuando vea este s[mbolo - iTENGA EN CUENTAS LAS ADVERTENCIAS! PROPOSICION 65 DE CALIFORNIA ADVERTENCIA: El escape del motor de este producto, algunos de sus componentes y algunos componentes del veh[culo contienen o liberan sustancias qu[micas que el estado de California considera que pueden producir c_ncer, defectos de nacimiento u otros problemas reproductivos. contienen plomo Los y compuestos de plomo, productos yqu[micos conocidos al Estado de ADVERTENCIA: postes de bater[a, los terminales, los accesorios relacionados California causar el c_ncer y el dar5o reproductivo. Lave manos despu_s del manejo. _IL PELIGRO: Esta m_quina est_ diser_ada para set utilizada respetando las normas de seguridad contenidas en este manual. AI igual que con cualquier tipo de equipo motorizado, un descuido o error por parte del operador puede producir lesiones graves. Esta m_quina es capaz de amputar dedos, manos y pies y de arrojar objetos extrar_os con gran fuerza. De no respetar las instrucciones de seguridad siguientes se pueden producir lesiones graves o la muerte. Fundonarniento Lea y siga todas las instrucciones manual antes de intentar comprenda contenidas ensamblar en este esta m_quina. y siga todas las instrucciones este manual regulares 2. de esta m_quina en un lugar seguro y para solicitar Esta m_quina un juguete. que figuran en la No permita operen para referencias Por tanto, tenga la m_xima leery comprender y no precauci6n 4. Inspeccione el equipo. en Los contra las paredes que el material 5_ Para ayudar a evitar el contacto operador arrojado, con la cuchilla mant_ngase detr_is de las manijas y mantenga o una en la zona del a los ni_os, observadores, ayudantes y mascotas apartados al menos 25 metros de la podadora mientras est_fien operacidn. Detenga la m_iquina si alguien entra en la zona. No la utilice con ningOn otto 6_ las instrucciones el _rea en donde siempre mientras anteojos opera o la m_iquina o que en este con estas reglas de seguridad usar esta m_quina. Saque todas las piedras, los ojos utilice de seguridad mientras la ajusta o repara. Los objetos arrojados rebotan pueden lesionar gravemente la vista. m_s deben contenidas Para protegerse antiparras de 14a_os Los ni_os de 14 ahosy minuciosamente material y obstrucciones que podrian provocar descargado rebote contra el operador. para realizar manual y deben ser capacitados y supervisados pot uno de los padres. 0nicamente los individuos responsables que se hayan familiarizado operaci6n deber_n por la cuchilla. Guarde futuras de precisi6n, nunca que los ni_os menores esta m_quina. con los que podria por la m_fiquina pueden producir lesiones el patrdn en el que va a ir descargando lesidn por un objeto Su unidad ha sido dise_ada extra_os ser arrojados etc. Evite adem_is descargar repuestos. una tarea: cortar el c_sped. prop6sito. 3. antes de operarla. es una pieza de equipo todo momento. o que podrian el recorte para evitar que la descarga de material se realice hacia los caminos, las veredas, los observadores, Lea, m_quina yen el o los manuales antes de intentar operarla. Familiaricese completamente con los controles y con el uso apropiado y otros objetos tropezar objetos arrojados graves. Planifique Fundonamientogeneral: 1. juguetes para la utilizar_ palos, cables, huesos, 7_ Utilice zapatos pantalones de trabajo resistentes, y camisas ajustados. camisas y pantalones que cubran de suela fuerte y Se recomienda utilizar los brazos y las piernas, asi como calzado con puntas reforzadas en acero. Nunca opere esta m_iquina con los pies desnudos, sandalias, o con zapatos ligeros o con los que se pueda resbalar (por ejemplo, calzado de Iona). 8. Noponga lasmanos olospiescerca delaspiezas rotatorias control delacuchilla yotrosdispositivos deseguridad oenlatolvadelacortadora. Elcontacto conlascuchillas yprotecci6n ensulugaryfuncionando. Nunca opere la puede producir laamputaci6n demanos ypies. cortadora silosdispositivos deseguridad est_n dahados. Si noIohace, esto puede t ener como resultado lesiones. 9. Unacubierta dedescarga faltante odahada puede provocar elcontacto conlacuchilla olesiones porobjetos 21. Elsilenciador yelmotorsecalientan ypueden producir arrojados. quemaduras. Nolostoque. 10. Muchas lesiones ocurren comoresultado depasar la 22. Utilice solamente partes yaccesorios fabricados cortadora sobre lospiesdurante unacaida provocada por especialmente paraestam_quina, originales delfabricante derrapes otropiezos. Nosesostenga delapodadora sise (OEM). SinoIohace, estopuede tenercomo resultado est_cayendo, suelte lamanija inmediatamente. lesiones personales. 23. Para encender elmotor, jaledelacuerda lentamente hasta 11. Nunca tirehacia usted lapodadora mientras camina. quesienta resistencia, luego jaler_pidamente. Elrepliegue Sideberetroceder lapodadora paraevitar unapared r_pido delacuerda dearranque (tensi6n deretroceso) le uobst_culo, mireprimero abajo yatr_spara evitar jalar4lamanoyel brazo hacia elmotorm4sr4pido deIo tropezarse yluego sigaestos pasos: queusted puede soltar. Elresultado pueden serhuesos a. Retroceda delapodadora hasta estirar rotos, fracturas, hematomas oesguinces. completamente susbrazos. 24. Sisepresentan situaciones quenoest4n previstas eneste b. Aseg0rese queest_bienequilibrado ybienparado. manual seacuidadoso yuseelsentido comun. Marque paracontactar eldepartamento deatenci6n alcliente y c. Tiredelapodadora lentamente hacia usted, no obtener elnombre desudistribuidor m4scercano. m&s all&delamitaddeladistancia entreusted y la podadora. Funcionamientoen pendientes d. Repita estos pasos comoserequiera. Las pendientes son un factor importante que se relaciona con 12. Noopere estam&quina estando bajolosefectos del los accidentes producidos por derrapes y caidas y que pueden alcohol odedrogas. producir lesiones graves. La operacidn en pendientes requiere 13. Noembrague elmecanismo deautopropulsi6n en mayor precaucidn. Si no se siente seguro en una pendiente, no unidades conesteequipo mientras arranca elmotor. la pode. Para seguridad, use el medidor de pendientes que se 14. Elmecanismo decontrol delacuchilla esundispositivo de incluye como parte de este manual para medir la pendiente seguridad. Nunca intente desviarse desufuncionamiento.antes de operar la unidad en una zona inclinada. Si la pendiente Dehacerlo nofuncionarian losdispositivos deseguridad y supera los 15 grados, no la pode. podrian producirse lesiones personales porelcontacto con I0siguiente: lascuchillas giratorias. Lasmanijas decontrol delacuchilla deben funcionar bienenambas direcciones yregresar Mueva la podadora a trav6s de las caras de la pendiente, autom_ticamente alaposici6n dedesengrane cuando se nunca hacia arriba y abajo. Tenga cuidado cuando cambie lassuelta. de direcci6n cuando opere la m_quina en pendientes. 15. Nunca operelapodadora enc6sped humedo. Siempre est6 2. Est6 atento a los agujeros, raices, rocas, objetos ocultos o seguro desuequilibrio. Sitropieza ycaepuede lesionarse abultamientos que puedan provocar que se derrape o se gravemente. Sisiente quepierde elequilibrio, suelte tropiece. El c6sped alto puede ocultar obst_culos. inmediatamente lamanija decontrol delacuchilla yla 3. Siempre est6 seguro de su equilibrio. Si tropieza y cae cuchilla dejar_ degirarentressegundos. puede lesionarse gravemente. Si siente que pierde el 16. Corte elc6sped solamente conluzdediaoconunabuena equilibrio, suelte inmediatamente la manija de control de luzartificial. Camine, nunca corra. la cuchilla y la cuchilla dejar_ de girar en tres (3) segundos. 17. Detenga lacuchilla cuando cruce caminos degravilla, No haga I0siguiente: pasos oandadores. I. No corte el c6sped cerca de pozos, hundimientos, bancos, 18. Silam_quina comenzara avibrardemanera anormal, podria perder el equilibrio. detenga elmotor, ybusque inmediatamente lacausa. 2. No pode pendientes mayores de 15 grados como Io indica Lavibraci6n porIogeneral esunaadvertencia dealg0n el medidor de pendientes. problema. 19. Apague elmotoryespere hasta quelacuchilla sedetenga 3. No pode el c6sped h0medo. Si no est_ firmemente parado, puede resbalarse. completamente antes deretirar laguarda paraelrecorte dec6sped odesatorar latolva.Lacuchilla continua girando Ni os porunoscuantos segundos despu6s queelmotorseha apagado. Nunca coloque ninguna partedelcuerpo enel Pueden ocurrir accidentes tr_gicos si el operador no est_ atento _rea delacuchilla hasta queest6seguro quelacuchilla ha a la presencia de ni_os. Por Io general a los ni_os les atraen las detenido sumovimiento rotatorio. podadoras y la actividad de podar el c6sped. No entienden los riesgos ni los peligros. Nunca d6 por sentado que los ni_os 20. Nunca operelacortadora sinlasguardas apropiadas, permanecer_n en el mismo lugar donde los vio por ultima vez. cubierta dedescarga, guarda pararecorte, manija de 4 I SECTION 2 -- IV_EDIDAS IMPORTANTES DE SEGURIDAD 1. Mantenga estricta a los ni_os fuera del _rea de trabajo vigilancia de un adulto responsable 11. y bajo adem_s del 3. Est_ alerta y apague Antes y mientas la podadora si un ni_o ingresa al _rea. se est_ moviendo la gasolina derramada Traslade la m_quina encender el motor. operador. 2. Limpie 12. Nunca almacene en unespacio hacia atr_s, mire hacia aparatos atr_s y cuide que no haya ni_os. la m_quina cerrado con piloto agua, calentadores, 4. Tenga extrema precauci6n cuando se aproxime a esquinas ciegas, entradas de puertas, _rboles u otros objetos que puedan obstaculizarle la vista de un ni_o que pudiese alejados o calientes. caliente. 6. a los ni_os de los motores en marcha que ni_os menores esta m_quina. Los ni_os mayores leery entender las instrucciones entrenados contenidas de combustible chispas o calentadores hornos, de ropa u otros secadores mantenga Limpie los derrames la m_quina de otros de aceite o combustible embebidos Deje que la m_quina se enfrie 5 minutos antes de almacenarla. de operaci6n pot Io menos Fund0namient0 general: y reglas y deben 1. set Nunca encienda un motor en espacios zona con poca ventilaci6n. pot sus padres. mon6xido 2. de carbono, Antes de limpiar, compruebe cerrados El escape del motor un gas inodoro o en una contiene y letal. reparar o inspeccionar la m_quina, que la cuchilla y todas las partes que se Manej0 segur0 de la gas01ina: mueven 1. y p6ngalo de manera que haga masa contra el motor evitar que se encienda de manera accidental. Para evitar lesiones personales o dahos materiales sea sumamente cuidadoso al manipular la gasolina. La gasolina puede inflamable y los vapores lesionar gravemente son explosivos. si derrama gasolina Se 3. 2. Utilice s61o recipientes 3. Nunca Ilene los contenedores en el interior o cami6n con recubrimientos 4. en un remolque con un recipiente de desde un dispensador 5. de gasolina. 4. Apague todos los cigarrillos, de combusti6n. cigarros, 7. Nunca cargue combustible en la m_quina en interiores porque Los vapores inflamables podrian acumularse en el tea. Nunca recargue tanque de combustible. no m_s de 1 pulgada cuello de Ilenado combustible. 10. el tanque Vuelva a colocar Llene el para la expansi6n la tapa de la gasolina y ajustela bien. de partes que de equipos originales y son muy afiladas y podrian o utilice guantes y extreme le de servicio. los dispositivos de seguridad peri6dicamente bien se encuentra en de manera que funcionen de Despu_s de golpear con algun objeto extra,o, detenga el motor, desconecte el cable de la bujia y conecte el a masa. Inspeccione para determinar minuciosamente la m_quina si est_ dahada. Repare el daho antes de y operarla. 8. Nunca trate de ajustar una rueda o la altura de corte mientras el motor est_ en marcha. 9. Los componentes de la tolva para recorte, cubierta de descarga y escudo de riel, est_n sujetos a desgaste pot debajo de la base del para dejar espacio del fabricante todos los pernos, tuercas y tornillos encenderla cargar combustible. cuando Nunca manipule motor combustible mientras el motor est_ caliente o en marcha. Deje que el motor se enfrie por Io menos dos minutos antes de volver a 9. Mantenga la cuchilla imprudente. Controle forma adecuada. pipas y otras fuentes Nunca saque la tapa del gas ni agregue original "La utilizaci6n ajustados para asegurarse que la m_quina condiciones seguras de operaci6n. 7. 8. que est_n bien visualmente la cuchilla desgaste, roturas, etc.). con equipo de las podadoras Envuelva precauciones 6. 6. para de la cuchilla y del motor para verificar con las especificaciones Las cuchillas cortarlo. 5. la boquilla. el cable de la bujia podria tener como resultado un rendimiento incorrecto adem_s la seguridad podria estar comprometida" en vez hasta que est_ Ileno. No utilice un dispositivo para abrir/cerrar la cuchilla no cumplan Mantenga la boquilla de Ilenado en contacto con el borde de la entrada del tanque de gasolina o contenedor en todo momento frecuentes (OEM) listado en este manual. en el piso y lejos port_til, Revise los pernos de montaje Reemplace de un vehiculo Retire el equipo a gasolina del cami6n o remolque y II_nelo en el piso. Si esto no es posible, entonces Ilene dicho equipo Desconecte apretados. Inspeccione adem_s en busca de dahos (abolladuras, para gasolina autorizados. pl_sticos. Coloque siempre los recipientes del vehiculo antes de Ilenarlos. se han detenido. a intervalos sobre usted o sobre la ropa ya que se puede encender. o caja de camioneta y con combustible. de 14 ahos operen de 14 a_os deben Servicio es altamente de con un silenciador en este manual y supervisados antes de como pot ejemplo, saque todos los desechos 14. de seguridad haya fuego, limpia de pasto, hojas y de acumulaci6n Pueden sufrir quemaduras Nunca permita o el recipiente donde Para reducir el riesgo de incendio escombros. Mantenga y el equipo. aparatos a gas. 13. correr hacia la podadora. 5. sobre el motor a otra zona. Espere 5 minutos y dahos que podria dejar expuestas del partes que se mueven o permitir que se arrojen objetos. Para proteger su seguridad, verifique frecuentemente todos los componentes fabricantes y reempl_celos de equipos SECTION 2 -- s61o con partes de los originales JV_EDIDAS (O.E.M.) listadas en este IMPORTANTES DE SEGURIDAD S manual. "La utilizaci6n especificaciones de partes que no cumplan de equipos originales resultado un rendimiento incorrecto podria estar comprometida" 10. No cambie la configuraci6n acelere demasiado velocidad Guardachispas como y adem_is la seguridad del regulador el mismo. con las podria tener del motor El regulador m_ixima segura de operaci6n controla ADVERTENCIA:ESTA ni por bosque, la malezas o hierba excepto de escape del motor del motor. amortiguador 11. Verifique frecuentemente la linea de combustible, tanque, el tap6n, y los accesorios buscando p_rdidas. Reemplace de ser necesario. 12. No d_ arranque 13. Mantenga o reemplace sea necesario. 14. al motor el rajaduras o de seguridad, o materiales segun estados. Las leyes federales Puede conseguir Nomodifique el motor inseguras. Nunca cambie Segun la Comisi6n regulador del motor. de f_ibrica del Consumidor operar con gasolina siguientes todo terreno) motor (EM) y catalizador esa manera. de emisiones: comprendan de Seguridad las advertencias AI finalizar I SECTION 2 -- JV_EDIDAS IMPORTANTES para el de la vJda dtJlmedJa, adquiera nueva o haga inspeccionar de servicio autorizado y no tienen excesivo desgaste. accidentes, lesiones o muerte. de DE SEGURIDAD anualmente para cerciorarse funcionan el uso de esta m_iquina e instrucciones que figuran motorizada en este manual de que todos correctamente Si no Io hace, pueden alas personas producirse que lean, yen la m_iquina. una 6sta por un de GUARDE ESTAS IHSTRUCCIOHES 6 o poni_ndose RO. Box 361131 de Productos los sistemas mec_finicos y de seguridad incluir los Modificaci6n Su responsabilidad--Restrinja y respeten distribuidor para de tres vias (TWC) si est,1 n equipados ADVERTENCIA" m_iquina para est_in certificados comOn sin plomo y pueden sistemas de control de motores de servicios, de los Estados Unidos (CPSC) y la Agencia funcionamiento. que est_in certificados y cumplen con las de emisiones federales EPA y de California pequeflos de chispas para el silenciador autorizado Protecci6n Ambiental de los Estados Unidos (EPA), este producto tiene una vide dtJlmedJa de siete (7) aflos, 6 140 horas de Avko referidoa emisiones SORE (Equipos federales. el motor Vidatitil media la configuracidn con las leyes en caso de se aplican en territorios en contacto con el departamento Cleveland, Ohio 44136-0019. bajo ninguna circunstancia. Si cambia la configuracidn del regulador el motor puede descontrolarse y operar a velocidades Los motores regulaciones correspondientes, el amortiguador a trav_s de su distribuidor no modifique si el sistema con un exigidas pot ley (Articulo 4442 del Cddigo de Recursos Publicos de California). Es posible que existan leyes similares en otros puede daflar el medio ambiente. Para evitar lesiones graves o la muerte, con Si se utiliza un amortiguador de chispas el operador Io debe mantener en condiciones de uso adecuadas. En el Estado de California las medidas anteriormente mencionadas son Observe las leyes y normas aplicables para disponer adecuadamente de los desechos. La descarga inapropiada de liquidos est.1 equipado de chispas que cumpla locales o estatales haberlas. si no est,1 la bujia de encendido. las etiquetas m_iquina est.1 equipada un motor de combusti6n interna y no debe ser utilizada en o cerca de un terreno agreste cubierto Alineey sostengaeste nivel con un Arbolvertical... OObloa Io -4 o la esquina de una construcci6n I -4 o el poste de una cerca. I ntoada rose-. m,Z 2 || ,,,_tOI.IRa_,_ ,_. _diont_. I ¢N Z £ I- I 15 Useesta p_ginacomeguia paradeterminar lasindinadonesde laspendientesen lasque podriano tenor unaoperad6nsegura. WARNING: podadora pendientes, frente No pode en inclinaciones en movimiento nunca cruzando de las pendientes, mayores podria voltearse a 15 grados (elevaci6n aproximada de 2 1/2 pies por cada 10 pies). Una y causar lesiones severas. Opere las podadoras el frente de las pendientes. Opere las podadoras nunca hacia arriba y hacia abajo. MONTABLES arriba y abajo de las QUE SE EMPUJAN de manera que crucen el 3 Montajey Configuraci6n Contenido de ia caja Una Podadora Uno Manual Uno Colector de Operador Uno Paquete de Hardware Montaje 2_ NOTA: Esta unidad se envia sin gasolina ni aceite en el motor. Llene con gasolina y aceite como se indica en las instrucciones que se incluyen en el manual de motor adjunto ANTES de poner su podadora. ManUa 1. Retire las perillas manuales montaje superior en los soportes Apriete de los soportes que en el soporte Sujete con una tuerca de hardware de montaje pl_istica de mariposa, en el de la manija. que tambi_n se incluye en el paquete de hardware. Vea la Fig. 3-2. Repita del otro lado con los elementos restantes del paquete de hardware. est_ asentada de montaje las perillas manuales Bul6n de Carte (2) de de la manija y tire y retroceda la manija como se muestra en la Fig. 3-1. Aseg0rese de que la manija inferior b. superior Paquete de Hardware Retire el colector de c6sped y material de empaque pudiera estar entre las manijas superior e inferior. a. Inserte el bul6n de carro del paquete orificio en funcionamiento Uno Botella del Aceite de C_sped ruerca Pl,istica (2) firmemente de la manija. que sujetan la manija superior a la manija inferior. Aseg0rese de que el bul6n de carro est_ apropiadamente asentado en la manija. Figura 3=2 Figura 3=1 3. La guia de la cuerda est,1 unida al costado manija superior. Afloje derecho la tuerca de mariposa de la que sujeta la guia de la cuerda, Fig. 3-3. C01ect0rde C_sped 1. Para ensamblar el colector de c_sped (de set necesario), Haga el cierto bolso es clio vuelta a la derecha el lado antes de reunir (la advertencia a. Coloque de la etiqueta de pl_istico en el fondo, b. ser_i por fuera). la bolsa sobre el marco con el lado negro Fig. 3-5. Deslice el canal de pl_istico sobre los ganchos marco. Todos los canales excepto central de la bolsa se acoplan del la parte superior desde el exterior. f Figura a. Sostenga el control 3-3 de la cuchilla contra la manija superior. 4. b. Jale lentamente la cuerda de arranque para sacarla del motor. Suelte el control de la cuchilla. c. Deslice la cuerda de arranque d. Ajuste la tuerca mariposa. Asegure los cables a la manija inferior en la guia. utilizando Figura 3-5 la uni6n del cable. Tire de las uniones del cable apret_indolas recortando el exceso. Vea la Fig. 3-4. c. El centro de la bolsa se acopla desde el interior. y Figura 3-4 SECCION 3 -- MONTAJE Y CONFIGURACION 9 2. Para acoplar el colector de c_sped, Fig. 3-6. Ajustes Una placa de ajuste y una palanca en cada rueda proporcionan el ajuste de la altura de corte. 1. Presione la palanca hacia la rueda. 2. Mu6vala a cualquier de las posiciones para la altura de corte deseado. Vea la Fig. 3-7. F J Figura 3=6 a. Levante b. Coloque el colector la puerta de descarga Suelte la puerta de descarga sobre el colector de c6sped. Para quitar al receptor de modo que descanse de hierba, levante trasera en el cortac6sped. posterior. de c6sped en la varilla de pivote. la puerta de descarga y, lejos de la vara de pivote. El reverso de liberaci6n la puerta para permitir Figura 3=7 Receptor de hierba de levantamiento que ello cerrara la apertura descarga 3_ trasera del Nunca opere la podadora a menos que los ganchos del colector de c6sped est6n firmemente asentados en las ranuras de los montajes de la m6nsula descarga posterior parte superior de la manija y la puerta descanse firmemente del colector de c6sped. hacia la cubierta IMPORTANTE:Todas cortac6sped. ADVERTENClA: Libere la palanca de contra la de la podadora. las ruedas deben set colocadas relativa. Cuando el terreno o irregular la palanca de ajuste de la altura a una posici6n cambie m_is alta. De esta manera es agreste se cuida m_is el c6sped. I.lenado de gasolinayaceite Refi6rase a la secci6n de motor informaci6n de motor. 1. 2. en este manual AEadir el petr61eo proporcionado pot primera para la antes de la unidad Atender el motor secci6n de motor manipule con la gasolina como instruido de este manual. gasolina. Tenga extremo La gasolina m_iquina en interiores Y CONFIGURACION en la cuidado cuando es altamente inflamable y sus vapores pueden causar explosiones. Nunca agregue combustible MONTAJE inicial vez de la caja. ADVERTENCIA: SECCION 3-- en la misma posici6n o mientras el motor a la est,1 caliente o en funcionamiento. Apague cigarros, de combusti6n. pipas y otras fuentes cigarrillos, 4 Controles Y Caracter sticas Control de Palanca de ajuste de altura de corte (en cacla rueda) / J Figura 4=1 Arrancador degetroceso Control de Cuchiila El control de la cuchilla est_ unido a la manija superior. Presione la manija de control de la cuchilla contra la manija superior para operar la unidad. Suelte la manija de control de la cuchilla para detener _ el motor y la cuchilla. Palancade Ajustede ia Alturade Corte corregir relativa est_ unido a la manija superior Tire la perilla de est_rter para activar el est_rter uso del est_rter puede no ser necesario la temperatura de aire es alta. en el motor. si el motor El es caliente o Colectorde C_sped una en cada rueda y se usan para la altura de corte. Las cuatro palancas tienen que estar en la misma posici6n de retroceso derecha. Para encender la unidad col6quese detr_s de la misma y tire de la cuerda del arrancador de retroceso. Periilade Est_rter cuchilla es un dispositivo de seguridad. Nunca DVERTENCIA" El mecanismo de control de la intente anular su funcionamiento. Estas palancas est_n ubicadas El arrancador para asegurar un corte uniforme. El colector de c_sped, Iocalizado en el reverso del cortac_sped, es usado para empaquetar los recortes de peri6dico de c_sped para la disposici6n en otto sitio. Una vez que el bolso es Ileno, tiene que set quitado del cortac_sped y vaciado antes m_s lejos segar. 11 Funcionamiento Encendidodei Motor ADVERTENCIA: Asegurese que ninguna persona aparte del operador permanezca cerca de la podadora mientras arranca el motor u opera la misma. Nunca encienda un motor en espacios cerrados o en una zona con poca ventilaci6n. escape del motor un gas inodoro contiene mon6xido y letal. Mantenga El de carbono, las manos, los pies, el cabello y la ropa suelta alejados de las partes m6viles del motor y de la podadora. 1. Saque la perilla de est_rter del mango Iocalizada en el lado izquierdo superior. Vea la Fig. 5-1. NOTA: El uso del est_rter puede no set necesario si el motor es caliente o la temperatura de aire es alta. 2. Col6quese control detr_s de la podadora, apriete de la cuchilla y sost_ngala contra la manija de la manija superior. Vet la Fig. 5-1. 3. Sostenga firmemente manija del arrancador las dos manijas juntas, tome la de retroceso y tire de la cuerda para sacarla con un movimiento 5-1. Mantenga firme r_pido y continuo. la manija del arrancador, cuerda regrese lentamente deje que la al arrancador.Repita hasta que el motor est_ en marcha. Deje que la cuerda se enrosque lentamente de regreso. IMPORTANTE: retroceso No permita Figura 5=1 Vea la Fig. gsodel Colectorde C sped Puede utilizar el colector de c_sped para recoger mientras opera la podadora. que el juez de salida de 1. se rompa atr_s contra la guia de cuerda. Acople el colector de c_sped siguiendo en la secci6n de Montaje 4. Cuando el motor calienta, empuje en la perilla de est_rter. que la bolsa de recolecci6n Suelte la manija de control motor de la cuchilla para detener el 2. y la cuchilla. detenido trabajo Espere a que la cuchilla pot completo en la podadora o de retirar el colector 3. de otros objetos objetos en cualquier operador que pudiesen pueden dahar la cortadora set arrojados direcci6n accidentalmente y provocar o el motor. Dichos pot la podadora lesiones personales graves al y a otras personas. galas de seguridad podadora o mientras durante la operaci6n la ajusta o la repara. de la soltando Compruebe la manija de que la unidad se haya por completo. Para deshacerse _ de los recortes de c_sped levante la puerta hacia arriba, detenga el motor. Retire el cable de la bujia, DVERTENCIA: Si golpeaparaunvet objeto inspeccione la podadora que extra,o, no tenga dahos, y repare el daEo antes de reiniciar y operar la podadora. La vibraci6n excesiva de la podadora durante posible. _ est_ Ilena. pot completo la operaci6n debe inspeccionar set que objetos extrai_os sean arrojados a los ojos, Io DVERTENCIA: operar una podadora puede cual puede daharlosAI gravemente. Utilice siempre Los recortes de descarga y tire de la bolsa de recolecci6n apart_ndola de la podadora. Usodeia Podadora deC sped que el c_sped est_ libre de piedras, palos, cables u el motor de la cuchilla. detenido se haya antes de hacer cualquier c_sped. Asegurese Detenga control ADVERTENCIA: las instrucciones y Configuraci6n. de c_sped se recolectar_n autom_ticamente en la bolsa a medida que pase la podadora. Opere la podadora hasta Detenci6ndel Motor 1. dichos recortes es una indicaci6n y reparar la unidad de daEo. Se Io antes 6 Mantenimiento Y Ajustes Mantenimiento 3. Lubrique puerta RecomendadonesGenerales temporada Respete siempre las reglas de seguridad tareas de mantenimiento. La garantia de esta podadora cuando 4. realice no cubre elementos de c_sped u otros desechos. de la velocidad como se indica controlada del motor 1. set verificados de la plataforma de la podadora la acumulaci6n de recortes Siga los pasos que aparecen todos los sujetadores Detenga siempre Desconecte el cable de la bujia. Drene la gasolina podadora o coloque un trozo de pl_stico de Ilenado del combustible. pot Io menos una y compruebe debajo Incline la podadora de manera de la debajo del tap6n que quede apoyada sobre la caja. Mantenga hacia arriba el lado donde se encuentra filtro de aire. Sostenga firmemente la podadora. el el motor, desconecte la bujia y haga masa contra el motor antes de realizar cualquier tarea de mantenimiento a 90 grados en ninguna direcci6n y no deje la ADVERTENCIA: inclinefiltrar la podadora m_s de podadora inclinada. Nunca Se puede aceite dentro i_li su m_quina. de la parte superior del motor y causar problemas de arranque. Lubrkad6n Lubrique con aceite ligero los puntos de pivote del control de la cuchilla al menos una vez cada estaci6n. control la parte inferior invalidar_ que est6n bien ajustados. ADVERTENCIA: de motor. para realizar esta tarea. 2. Revise peri6dicamente para lista de para la lubricaci6n despu_s de cada uso para prevenir del motor. Todos los ajustes deben vez en cada estaci6n. Vet la Fig. 6-1. de Motor Cuidad0de la cubierta que han deber_ dar mantenimiento en este manual. a la podadora la oxidaci6n. e instrucci6n Debe limpiar la garantia de la cuchilla direcciones, 2. para prevenir lubricaci6n de la con aceite ligero una vez por Siga la secci6n de Mantenimiento estado sujetos al mal uso o la negligencia del operador. Para recibir el reembolso total de la garantia, el operador El cambio 1. el resorte de torsidn y los puntos cruciales trasera de descarga Lubrique debe funcionar El Raspe y limpie la parte inferior de la plataforma mediante el uso de una herramienta adecuada. No la rocie con agua. IIVlPORTANTE: No recomendamos en ambas a presi6n Fig. 6-1. ruedas se quitan pot cualquier del brazo giratorio Sin embargo, raz6n, debe lubricar y la superficie rueda con aceite ligero, Fig. 6-1. interna de la dejardin 3. Vuelva a colocar y reducir_ la podadora suelo. Si puso un pl_stico combustible asegurese el uso de una limpiadora para limpiar su unidad. dahos al motor. vida util de la m_quina si las la o manguera Pueden producir las ruedas pot Io menos una vez pot temporada con aceite ligero o aceite para motor. superficie libremente 3. El uso de agua acortar_ su facilidad la de servicio. sobre sus ruedas en el debajo del tap6n de Ilenado de de sacarlo en este momento. Cuidadospara el motor NOTA: Refi_rase alas secciones de motor en este manual Verifique de mantenimiento para instrucciones y operaci6n detalladas. el nivel de aceite. Limpie el filtro de aire cada 25 horas en condiciones normales de uso. Limpie a intervalos de pocas horas cuando Limpie haya mucho polvo. la bujia y restablezca la distancia disruptiva por Io menos una vez por temporada. Limpie el motor regularmente con un trapo o cepillo. Mantenga limpio el sistema de enfriamiento (_rea del soplador) para permitir la circulaci6n Quite todo el c_sped, suciedad _rea del silenciador. apropiada y residuos de aire. combustibles del Figura 6-1 13 F Reemplazodealer6ntrasero 1. Para quitar la tapa trasera, levante tapa de prensa en a ambos la puerta lados para quitar trasera,y la del agujero. Ver la Fig. 6-2. 2. Quite la tapa del agujero de enfrente nueva tapa en la orden de enfrente y sustituya y la manera por la del retiro. Figura 6=2 SECCION 6-- MANTENIMIENTO Y AJUSTES 7 Servido Cuidadode ia CuchUla 5. Lubrique el cig0e_al del adaptador ADVERTENCIA: para afilarla Cuando saque la cuchilla o reemplazarla, prot_jase de corte adaptador la cuchilla las manos usando un par de guantes para trabajo rudo o un trapo grueso para sostener la cuchilla. Inspeccione peri6dicamente el adaptador de rajaduras, especialmente objeto extraho. de la cuchilla en busca cuando golpee un Realice los reemplazos que resulten necesarios. Siga los pasos que aparecen realizar el mantenimiento de la cuchilla. 1. 2. Desconecte debajo el cable de la bujia. Gire la podadora costado y compruebe queden mirando para sobre el 7. hacia arriba. Saque el perno y el soporte numero de parte hacia el piso cuando posici6n de operaci6n. sostienen la cuchilla y el adaptador del motor, Fig. 7-1. de la cuchilla que de la misma al cig0e_al la podadora que la cuchilla est_ en quede en las bridas del adaptador. est_n alineadas con los orificios peque_os de la Vuelva a colocar el perno hexagonal y ajustelo segun Los siguientes valores de torsidn: 450 Ib-pulg como minimo, 600 Ib-pulg de campana Asegurese Coloque el soporte de campana de la cuchilla en la misma. Compruebe que las muescas del soporte de campana de la cuchilla cuchilla. que el filtro de aire y el carburador interna con aceite ligero. Deslice el de la cuchilla sobre el cig0e_al del motor. Instale con el lado marcado "Bottom" (inferior) o con el alineada y asentada 6. del motor y la superficie de la cuchilla como m_ximo. Para asegurar la operaci6n peri6dicamente el perno segura de la podadora de la cuchilla revise para determinar si est_ bien ajustado. AirnacenarnientoFuerade Temporada Se deben seguir estos pasos para la preparaci6n de la podadora para su almacenamiento. Limpie y lubrique la podadora instrucciones de lubricaci6n. No utilice una lavadora para limpiar su unidad. Cubra la cuchilla oxidaci6n. Almacene a presi6n equipo. k,. j de jardin la la unidad en una zona limpia y seca. No la Cuando almacene cualquier de dep6sito especial cuidado o manguera en Las con grasa para chasis para impedir almacene cerca de materiales fertilizantes. galp6n como se describe met_lico de realizarle corrosivos tipo de equipo como pot ejemplo motorizado o con poca ventilaci6n, un tratamiento antioxidante Use aceite ligero o silicona para recubrir especialmente los cables y partes m6viles de almacenarla. en un tenga al el equipo, de su podadora antes Figura 7-1 3_ Saque la cuchilla y el adaptador 4. Para comprobar el equilibrio, sobre un destornillador del cig0e_al, Fig. 7-1. retire la cuchilla de eje redondo. y balancee Saque metal del lado pesado hasta que quede bien equilibrada. Cuando afile la cuchilla, siga el _ngulo original de la muela como guia. Afile cada borde de corte pot igual para mantener balance de la cuchilla. ADVERTENCIA: Si la cuchilla est_ desequilibrada generar_ vibraciones velocidades. el excesivas cuando Esto puede producir podadora, y se puede personales. rote a altas da_os a la romper, causando asi lesiones 15 Solud6n de problemas Problema El motor no arranca Remedio Causa 1. El control de I_mina se retff6. 1. Contratar el control de I_imina. 2. Alambre de bujia desconectado. 2. Unit el alambre a la bujia. 3. Dep6sito de combustible combustible vacio 3. Llenar el tanque de la gasolina limpla, fresca. o affejo. 4. ESTA,RTER no activado. (De serequipado) 5. Bujia defectuosa. 5. Limpio, ajuste el hueco, o sustituir. 6. Unea de combustible 7. El motor 4. Ahogue el motor (vet la secci6n de Fundonamiento). bloqueada. se desbord6. 8. La v_lvula de combustible se cerr6. (De set 6. Unea de combustible limpia. 7. Esperar unos minutos para reactivarse. 8. V&lvula de combustible 9. El motor no est_ cebado. (De set equipado) 10. Fusible quemado. El motor funciona manera err_itica de ablerta. Ver el manual de motor. equipado) (Principio EI6ctrico Solo) 9. Cebe el motor tal como se explica en la seccl6n de Fundonamiento. 10. Sustituya el fusible (ver la secci6n de Servicio). 1. El cable de la bujia est.1 flojo. 1. Conecte y ajuste el cable de la bujia. 2. La linea del combustible 2. Limpte la linea del combustible; combusttble est.1 tapada o el es vlejo. Ilene el tanque con gasohna hmDa y fresca La ventilaci6n en la tapa del combustible est,1 obstruida. 4. Agua o suciedad en el sistema del combustible. 5. El filtro de aire est,1 sucio. 3. Destape la ventilaci6n. 4, Vacie el tanque del combustible. Ilenarlo con combustible 5, Vuelva a limpio. Refi6rase a la seccidn de mantenimiento de motor, 6, La unidad que corre con el ESTARTER(De ser equipado) El motor recalienta Saltos ocasionales 6. Perilla de ESTARTER de empuje en. se aplic6. 1. El nivel de aceite del motor es bajo. 1. Llene el c_irter con aceite adecuado. 2. Flujo de aire restdngido. 2. Retire el alojamiento 1. La distancia disruptiva (pausas) a alta velocidad pequeffa. Funciona mal en marcha lenta Bujia atorada, averiada disruptiva. de la bujia es muy 1. Ajuste la distancia del soplador disruptiva y limpielo. a 0,76 mm (0,03 pulg). o exceso de distanda 2. El filtro de aire est,1 sucio. 1. Reajuste la dlstanda disruptiva a 0,76mm (0,03)o reemplace la bujia. 2. Refi@ase a la secd6n de mantenimlento de motor. Seguido '°1 despu_s paginan Problema Demasiada vibraci6n La podadora no abona el c_sped Remedio Causa 1. Cuchilla floja o desequilibrada. 1. Apriete la cuchilla y el adalotador. Equilibre cuchilla. 2. Cuchilla abollada. 2. Consulte a un distribuidorautorizado. 1. C_sped h0medo. 1. No corte el c_sped cuando est_ mojado, la espere hasta que sea m_s tarde para hacerlo. 2. C_sped excesivamente alto° 2. Pode una veza una altura de corte elevada y luego vuelva a realizar el corte a la altura deseada, o siga una ruta de corte m_s estrecha. 3. La cuchilla de [a cortadora Corte desigual 1. La posici6n no est_ afilada. de las ruedas no es correcta. 3. Afile o cambie [a cuchilla. 1. Coloque las cuatro ruedas en la rnisnqa posici6n de altura (de ser equipado con ajustadores 2. La cuchilla de la cortadora no est_ afilada. de altura individuales). 2. Afile o cambie la cuchilla. SECCION 8 -- SOLUCION DE PROBLEIVlAS 17 Funcionamiento deMotor Tap6n de combustible \ \ de aire Empuf=adura del arranque Ta llenado de aceite Tubo de drenaje Bujia de encendido Figura 10-1 Control Previoal Fundonamiento RecomendacionesSobreel Aceite IMPORTANTE: el motor. Este motor Hacer funcionar se despacha el motor sin gasolina sin suficiente causarle graves daflos y anula la garantia Antes de arrancar el motor, exceso. La capacidad Use un aceite para motor detergente m__ designaci6n de cuatro tiempos, equivalente de 20 onzas. _ seleccione con la clasificaci6n con certificado 20w40, _Ow50_____ I 15w40, O_____m/b. SG/SF tienen est_ la viscosidad adecuada @ para superficie 1. Asegurese nivelada Retire el tap6n medici6n lOw40 Iilmmmlllll ml_llmmmlmmmmm lOw30_____u media de su zona. (°C)-30 ° Verifiqueel nivelde aceite IMPORTANTE: m30 que SAE 10W-30 para uso general, a todas las Si utiliza aceite con viscosidad monogrado, en la tabla de la derecha la temperatura mllm_m o un aceite en el envase. Se recomienda temperaturas. 20 Ilene con aceite. No Ilene en cubra o exceda las exigencias de los fabricantes de autom6viles americanos respecto de la clasificaci6n de servicio SG/SF. Los aceites para motor 20w aceite puede del motor. de aceite es de alrededor de calidad premium _ ni aceite en de comprobar y con el motor de Ilenado el motor (°F)-20 ° sobre una -20 ° -10 ° 0 ° 0° 200 10° 400 200 300 400 600 800 1000 apagado. de aceite y limpie de aceite. Vea la Fig. 10-2. Temperatura la varilla de 1. Viscosidad monogrado 2. Viscosidad multigrado ambiente IMPORTANTE: El uso de aceite sin detergente o para motor dos tiempos puede reducir la vida util del motor. de Verifiqueel Nivel de Combustible Antes de sacar la tapa para cargar combustible, alrededor. 2. Llene el tanque hasta aproximadamente limpie 1 pulgada debajo de la parte m_s baja del cuello para permitir la expansi6n del combustible. Tenga cuidado de no Ilenar en exceso. Tap6n de Ilenado /varilla del nivel IMPORTANTE:Antes 2 minutos. de cargar, deje que el motor se enfrie de aceite Encendidodei Motor ADVERTENCIA: Siempre mantenga las manos y los pies alejados de las piezas m6viles del equipo. No utilice fluidos comprimidos para arrancar. Los vapores son inflamables. Tire de la perilla del cebador barra de control Inserte la varilla de medici6n ubicada a la izquierda de la Vea la Fig. 10-3. NOTA: Puede no set necesario usar el cebador est_ caliente o la temperatura del aire es elevada. si el motor f Figura 10-2 2. superior. en el cuello de Ilenado de aceite, pero no Io atornille. 3. Si el nivel est_ bajo, agregue aceite lentamente hasta el limite superior de la varilla de medici6n. Vea el recuadro de \\ la Fig. 10-2. \\ 4. Ajuste firmemente el motor. IMPORTANTE: la varilla de medici6n antes de arrancar \\ No Io Ilene en exceso. El exceso de aceite puede causar ahumado, en la bujia y saturaci6n de arranque, suciedad de aceite en el purificador problemas de aire. Rec0mendad0nesS0breel Combustible Use la gasolina automotor (leaded sin plomo o bajo para minimizar dep6sitos de c_mara de combusti6n) con minimo 87 octano. 15 % (Metilo La gasolina de con el etanol de hasta el 10 % o MTBE del leter Butyl Terciario) puede set usada. Nunca use una \ mezcla de petr61eo/gasolina, la gasolina sucia, o gasolina 30 dias viejos. Evite conseguir la suciedad, el polvo, o el agua en el dep6sito de combustible. NO USE LA GASOLINA E85. _ inflamable y bajo determinadas condiciones es ADVERTENCIA: La gasolina esensumamente explosiva. Cargue combustible un _rea bien ventilada y con el motor apagado. No fume ni permita llamas o chispas en el lugar donde se carga combustible combustible o se encuentra del motor. el dep6sito Figure 2_ 3_ de combustible o sus vapores al cargarlo. se pueden incendiar. control superior. Tire suavemente contra de la empuhadura el la barra de del arranque luego tire r_pidamente hasta para reducir la arranque No permita retroceda que la empu_adura r_pidamente del contra la guia de la cuerda. Vu_lvalo arrancador. suavemente para que no se dahe el Cuando el motor se haya calentado, derramado Si se derrama combustible, asegurese de que el _rea est_ seca antes de arrancar el motor. Evite el contacto prolongado de la cuchilla y sost_ngalo IMPORTANTE: de no derramar El combustible de c_sped, presione control compresi6n, impedir la tensi6n de retroceso y arrancar el motor. Repita de ser necesario. Vea la Fig. 10-3. cuello de Ilenado). Despu_s de cargar combustible, asegurese de que el tapdn del tanque est_ bien Tenga cuidado 10-3 Parado detr_s de la cortadora sentir la resistencia, ADVERTENCIA: No Ilene en exceso el tanque de combustible (no debe haber combustible en el cerrado y asegurado. \ m_s de con la piel o inhalar los vapores. 4_ empuje hacia adentro la perilla del cebador. Vea la Fig. 10-3. Detenci6ndei motor 1. Suelte el control de la cuchilla. SECCION 9 -- FUNCIONAMIENTO DE MOTOR 19 1 MantenimientodeMotor La inspeccidn _L y los ajustes peri6dicos si se desea mantener el mantenimiento. Apague Para evitar una puesta ADVERTENCIA: el motor antes en de marcha realizar accidental, desconecte la funda de la bujia. del motor un alto nivel de desempe_o. son esenciales El mantenimiento regular tambi_n garantizar_ una prolongada vida util del motor. Los intervalos de mantenimiento requeridos y el tipo de mantenimiento IMPORTANTE: Si el motor debe inclinarse para transportar equipo o para inspeccionar o extraer pasto, mantenga el lado de la bujia del motor hacia arriba. Si la bujia del motor se transporta o se inclina hacia abajo puede causar humo, un arranque dificil, contaminaci6n de la bujia o saturaci6n con aceite del depurador de aire. a ser realizado tabla de m_s abajo. Siga los intervalos se describen en la pot hora o calendarios, _i= funcionando, el silenciador estar_ muy caliente. DVERTENCIA: Si el motor ha estado Tenga cuidado de no tocar el silenciador. Calendariode Mantenimiento PrimerasS Cadausoo horas cadaShoras Inspeccione elaceitedel motor Cambieel aceitedel motor tt Inspeccione eldepuradorde aire Io que ocurra primero. Cuando se opera en condiciones adversas es necesario Ilevar a cabo un mantenimiento m_s frecuente. Cadatemporadao cada 25 horas Cadatemporadao cada S0horas Cadatemporadao cada 100horas y/ V '/ V '/ y/ Mantenimientodel depuradorde aire€ _// Inspecciones lasbujiasde encendido V/ Mantenimientodebujia V/ Limpiela protecci6nde retenci6n y/ Limpiealrededordel silenciador V/'* SustituyaFiltrode Combustible f Cuando se utiliza en _reas polvorientas, el mantenimiento debe ser m_s regular. ff Si se opera bajo carga pesada o en temperatura ambiente alta. V/ Fechasde Mantenimiento Mantenimientodei aceite NOTA: Elimine el aceite del motor sea compatible Inspeccione Aseg0rese el nivel de aceite regularmente. de que se mantenga antes de poner Los filtros Aseg0rese de inspeccionar el motor sustituidos sobre una superficie nivelada y con el motor apagado. Drene el aceite mientras el motor est6 caliente para asegurar un drenaje r_pido a menudo y completo. 1. Extraiga todo el combustible funcionar el motor combustible. 2_ Retire el tap6n del dep6sito hasta que se detenga de Ilenado _ haciendo adecuado. de papel no pueden que el Vea la Fig. 10-1. ser limpiados y deben ser una vez al a_o o cada 100 horas de operaciones; de set usado en condiciones o explosi6n. IMPORTANTE: Nunca opere el motor sin el depurador instalado. Resultar_ en desgaste r_pido del motor. 1. Retire el perno de mariposa aire. Retire los elementos Tap6n de Ilenado de aceite m_s muy polvorientas. punto de encendido bajo para limpiar el elemento Nunca use gasolina de delDVERTENCIA: depurador de aire. Podr{a producirse osolventes un incendio por falta de de aceite y permitiendo aceite se drene en un recipiente que que Io Mantenimientodel Depuradorde Aire Cambio de aceite IMPORTANTE: Sugerimos coloque en un recipiente sellado y Io Ileve a la estaci6n de servicio local para su recuperaci6n. No Io tire a la basura o Io vierta sobre el suelo. el nivel de aceite correcto. Inspeccione cada cinco horas o diariamente en marcha el motor. usado de la manera con el medio ambiente. y la cubierta y sep_relos. de aire del depurador Vea la figura Sustituya el elemento de papel cuando Sustituya el elemento de espuma de 10-2. sucio o daEado. cuando dahado. Elernento de Tap6n de Drena" Figura Elernento de espurna 10-1 L ADVERTENCIA: equipo Antes de inclinar el motor 3. Vuelva a colocar firmemente. 4. Vuelva a Ilenar con el aceite recomendado el tap6n 2_ Para limpiar el elemento el tap6n sep_relo del elemento de espuma. (vea secci6n el nivel de aceite. Vea la Fig. de Ilenado El aceite del motor c_ncer de piel si entra en contacto de aceite y asegurelo usado puede causar con la piel de manera reiterada y pot per{odos prolongados. Si bien esto es improbable a menos que manipule aceite usado todos d{as, sin embargo de espuma, de papel y I_vese en detergente liquido y agua. Permita secar a rondo antes de la utilizaci6n. No haga el petr61eo el de drenaje y apri6telo y controle Vuelva a colocar firmemente. IMPORTANTE: hasta que elemento Funcionamiento) 10-1. es recomendable con jab6n y agua inmediatamente manipulado Figura 10=2 para drenar el aceite, drene el combustible del dep6sito haciendo funcionar el motor el dep6sito de combustible est_ vacio. 5. o los lavarse bien las manos despu6s de haber aceite usado. SECTION10 -- MANTENIMIENTO DE MOTOR 21 Mantenimientode Bujia 3. Mida la separaci6n ser necesario La separaci6n bujia de encendido. NO de arranque al motor si no ADVERTENCIA: NO pruebe la chispasi no est_ la est_ la bujia de encendido. i_i Para asegurarse de que el motor bujia debe tenet una separaci6n funcione de buj[a con un calibrador. torciendo el electrodo debe establecerse Corrija de lateral. Vea la fig. 10-4. en 0,030 pulg. F bien, la correcta y debe estar libre de dep6sitos. 1. Retire la funda de bujia y utilice extraer la bujia.Vea I Electrodo una Ilave para buj[as para la Fig. 10-3. © Figura 10-4 4. Verifique que la arandela de la bujia est_ en buenas condiciones y enrosque la bujia hacia adentro manualmente para evitar enrosque cruzado. Funda de bujia 5. Una vez que la bujia est_ colocada una Ilave para comprimir Figura 10=3 NOTA:Cuando en su lugar, apriete con la arandela. instale una bujia nueva, apriete 1/2 de vuelta una vez que la bujia se encuentra colocada en su lugar para comprimir la arandela. Cuando vuelva a colocar _ 2. funcionando, muy caliente. DVERTENCIA:el silenciador Si el motorestar_ ha estado Tenga cuidado de no tocar el silenciador. Inspeccione visualmente la bujia. Elimine la bujia si presenta mucho desgaste, o si el aislante est_ agrietado astillado. Limpie la bujia con un cepillo a reutilizar. SECCION 10-- MANTENIMIENTO DE MOTOR de alambre una bujia usada, apriete bujia se encuentra arandela. o si se va IMPORTANTE: 1/8 - 1/4 de vuelta colocada una vez que la en su lugar para comprimir La bujia debe estar firmemente Una bujia que no se encuentre bien asegurada calentarse mucho y dahar el motor. la asegurada. puede ServicioconFUtrode Combustible Aimacenarniento El filtro de combustible no puede set limpiado y debe set sustituido una vezal aho o cada 100 horas de operaciones; menudo 1. de set dirigido Quite todo Los motores m_s a con vieja gasolina. el combustible del tanque dirigiendo combustible el motor la gasolina Quite la c-abrazadera I{nea de combustible de la linea de combustible y quite la de la salida de tanque. Vet la Fig. 10-5. f entre 30 y 90 dias tienen para evitar que se deterioren sistema combustible hasta que esto se pare a falta del combustible. 2. almacenados que ser tratados con un estabilizador de gasolina y los motores almacenaron m_s de 90 dias necesitan set drenados de en su motor se deteriora debe reparar o reemplazar del sistema combustible. 1. Extraiga durante el carburador todo el combustible funcionar el motor combustible. _1 y se forme o en las piezas principales Si el almacenamiento, y otros componentes del dep6sito hasta que se detenga DVERTENCIA: dirigiendo. goma en el del carburador. haciendo por falta de Nunca deje el motor desatendido \ 2_ Cambie el aceite del motor. Consulte la secci6n Cambio de Aceite. 3. Extriaga la bujia y vierte alrededor de motor arranque 4_ de 1/2 onza de aceite dentro del cilindro. Vuelva a colocar la bujia y lentamente el motor para distribuir el aceite. Limpie el pasto y residuos en torno la protecci6n de retenci6n del motor, y debajo, alrededor debajo de y detr_s del silenciador. Retoque la pintura da_ada, y revista otras _reas que puedan oxidarse con una pelicula delgada de aceite. 5_ k. j Figura 10-S 3. Saque el viejo filtro de combustible Sustituya 4. cuando Ilevado a hombros e ins_rtelo en la salida de tanque. 5. 6. Agarre el nuevo filtro de combustible Sustituya a partir del final completamente Vet la inserci6n la I{nea de combustible en un sector limpio, seco y bien ventilado, lejos de cualquier artefacto que funcione llama o luz piloto como homo, calentador con una de agua o secador de ropa. Tambi_n evite cualquier sector con una chispa produciendo motor el_ctrico o donde se utilizan herramientas el_ctricas. de la salida de tanque. sucio o dahado. Almacene De ser posible, tambi_n mucha humedad evita _reas de almacenamiento para evitar oxidaci6n con y corrosi6n. al hombro de la Fig. 10-5. 7. y la c-abrazadera. Mantenga el motor nivelado cuando Io almacene. La inclinaci6n del motor puede resultar en fugas de combustible o aceite. Limpieel Motor Retirarde suAlrnacenamiento Si el motor ha estado funcionando, d_jelo enfriar durante por Io menos media hora antes de limpiarlo. De manera regular, 1. Inspeccione su motor como se describe en la secci6n Control Previo al Funcionamiento de este manual. 2. Si el combustible fue drenado durante la preparaci6n para el almacenamiento, Ilene el dep6sito con gasolina nueva. extraiga el pasto y la acumulaci6n de suciedad del motor. Limpie la protecci6n de retenci6n y alrededor del silenciador. Limpie con un cepillo o aire comprimido. IMPORTANTE: No rocie el motor Si tiene un recipiente el agua podria contaminar con agua para limpiarlo el combustible. porque Con una manguera de jardin o equipo de lavado a presi6n tambi_n puede forzar agua dentro del depurador de aire o la abertura del silenciador. El agua en el depurador de aire embeber_ el elemento de papel, y el agua que pasa a trav_s del elemento ingresar en el cilindro, _ causando de que contenga o silenciador puede daho. se oxida y deteriora dificil. 3. de gasolina para Ilenar, asegurese solo combustible sin usar. La gasolina con el tiempo, causando Si el cilindro rue revestido preparacidn para el almacenamiento, con aceite durante brevemente durante el arranque. el motor un arranque la humear_ Esto es normal. alrededor del silenciador podr{an producir un ADVERTENCIA: La acumulaci6n residuos incendio. Inspeccione y limpie antesde de cada uso. SECTION10 -- MANTENIMIENTO DE MOTOR 23 Lasdisposiciones deEZStartPromise desu garantia limitada Adem_,sde los otros t_rminos y las condiciones de la garantia iimitada que rigen para su nueva cortadora, MTD LLC ("MTD") por ia presente garantiza que el motor de ia cortadora arrancar_, cuando un adulto capacitado Io intente en ia primera o segunda oportunidad (sujeto alas limitaciones que se describen a continuaci6n) por el periodo de duraci6n indicado en la garantia limitada del fabricante que rige para su producto. Si el motor de su cortadora no cumple con Io dispuesto esta garantia limitada, MTD cubrir_, los costos de ias piezas y ia mano de obra relacionada con los ajustes y/o ias reparaciones necesarias para devolver ai motor su condici6n de garantia. A fin de realizar un reclamo segQnestas disposiciones de su garantia, usted debe acudir a un proveedor para reparaciones autorizado con el producto y ia prueba de compra. En muchos casos, el minorista que le vendi6 el motor no se encuentra equipado para proporcionar el servicio de la garantia. Por Io tanto, deber_ ubicar el distribuidor autorizado m_,scercano Ilamando al n_mero telef6nico que se encuentra en ei Manual dei Operador o ingresando a ia p6,gina www.mtdproducts.com. Elementos y condiciones sin cobertura EZ Start Promise no cubre ni se apiica en los siguientes casos: • Costos del servicio de mantenimiento o piezas de rutina, como por ejemplo filtros, combustible, lubricantes, cambios de aceite, bujias de encendido, filtro de aire, afiladores de cuchilla, bordes desgastados, ajustes de cabies/variiias, ajustes de freno y embrague. • Costos de transporte desde y hacia un proveedor de reparaciones autorizado de MTD. • Los motores que se usen en apiicaciones comerciaies, de arrendamiento, institucionaies,gubernamentaies o no residenciales. Productos o piezas que hayan sido aiteradas o usadas de forma inadecuada o que requieran reempiazo o reparaci6n debido ai uso inadecuado, accidentes o faita de mantenimiento correcto. • Las reparaciones necesarias debido al descuido de la bateria, irregularidades en el suministro eBctrico o falta de preparaci6n de forma adecuada de la cortadora anterior a cualquier periodo sin uso superior a los tres meses. • Cargos de recogida y/o entrega. • Uso operacional inadecuado, abandono, accidentes, reparaciones no autorizadas o intentosde reparaciones del motor o de sus componentes por otras personas no autorizadas, fuera del proveedor de reparaciones de MTD. • Reparaciones o ajustes para corregir dificultades del arranque debido a aiguno de los siguientes motivos: falta de seguimiento de los procedimientos de mantenimiento adecuados -- goipe de GDO0-100163 Rev.B las cuchillas de cortadoras rotativas contra un objeto extra_o -- contaminantes en el sistema del combustible -- combustible o mezcia de combustibie/aceite inadecuada(en caso de dudas, consulte su Manual del Operador) -- faita de drenaje del sistema de combustible anterior a cualquier periodo sin uso superior a tres meses. Cualquier problema de arranque originado en el uso de combustibles, lubricantes o aditivos inadecuados. Condiciones o circunstancias especiales que normalmente requieren m6,sde dos intentos para arrancar, especificamente: 1) Primer arranque luego de la compra inicial, 2) primera vez que arranca luego de uno o varios periodos sin uso superiores a un mes o al almacenamiento de temporada, 3) arranque bajo temperaturas frias, como por ejemplo las que se presentan a comienzo de la primavera y a fin del oto_o, y 4) arranque dificultoso debido a ia no observancia por parte dei operador de los procedimientos de arranque adecuados identificados en el Manual dei Operador. Si usted tiene problemas en arrancar su unidad, verifique ei Manual dei Operador a fin de asegurarse de que est6,cumpiiendo los procedimientos correctos de arranque. Esto puede ahorrarle una visita innecesaria al distribuidor autorizado. Responsibiiidades dei propietario El mantenimiento de su cortadora (incluido el motor) debe hacerse cumpliendo los procedimientos de mantenimiento e instrucciones de arranque indicadas en el Manual del Operador. Tai mantenimiento de rutina, ya sea realizado por un distribuidor o pot usted mismo, es a su cargo. Por otro iado, conserve ia prueba de compra y los recibos de mantenimiento ya que se los pueden solicitar para validar un reclamo. Condiciones generaies Un proveedor de reparaciones autorizado de MTD que emplea repuestos aprobados debe reaiizar todas ias reparaciones cubiertas por esta EZStart Promise. La reparaci6n realizada pot un distribuidor autorizado para el mantenimiento de MTD es su Qnico recurso segQn esta garantia. MTD no es responsable por ning_n daSo indirecto, incidental o resultante relacionado con el uso de los productos cubiertos por esas garantias, incluidocualquier costo o gasto de suministro de equipo sustituto o mantenimiento durante periodos razonabies de desperfectos o no uso pendientes de iafinaiizaci6n de las reparaciones seg_n esta garantia. Algunos estados no permiten la exclusi6n de los daSos incidentaies o resultantes, ni las limitaciones sobre la duraci6n de las garantias implicitas, por Io que ciertas exclusiones o limitaciones pueden no serie de apiicaci6n. Notas 25 Notas NOTAS 27 MTD CONSUMER GROUP, iNC. (MTD), el Bordo de Recursos de Aire de California (CARB) y la Agencia de Protecci6n Medioambiental de Estados Unidos (U. S. EPA) Declaraci6n de Garantia del Sistema de Control de Emisiones (Derechos y obligaciones del propietario seg_n la garantia contra defectos) LA COBERTURADESISTEMADECONTROLDEEMISIONES APLICABLEA MOTORESCERTIFICADOSCOMPRADOSENCALIFORNIA EN2005 Y A PARTIRDE ENTONCES,QUESON USADOSEN CALIFORNIA,Y HASTAANO2005 DE MODELOCERTIFICADOY MOTORES POSTERIORESQUESON COMPRADOSY USADOSENOTRAPARTEEN LOSESTADOSUNIDOS. Californiayen otraparteen la Coberturade Garantiade Defectosde Controlde Emisi6nde los EstadosUnidos El Bordode Recursosde Aire de California(CARB),la U. S. EPAy MTDsecompJacenen explicarla garantiadel sistemade controlde emisiones de su motorparaequipotodo terreno,modelo,aSo2005 y versionesposteriores.En California,los nuevosmotorespequeSospara equipotodo terrenose debendise5ar,fabricary equiparparacumplir conest_.ndaresde antinieblat6xicade estados.En otraparteen los EstadosUnidos, el nuevono camino,motoresde ignici6nde chispacertificadospara el modelo2005 y m_.starde,debe encontrarel juego de est_.ndaressimilar adelantepor los EstadosUnidos.EPA.MTDdebe garantizarel sistemade controlde emisionesde su motorpor el periodode tiempoindicadom&s abajo,siemprey cuandono hayaexistidousoincorrecto,negligenciani mantenimientoinadecuadode su motorpequeBoparaequipo todoterreno. El sistemade controlde emisionespuedeincluirpiezascomo,por ejemplo,el carburador,sistemade inyecci6nde combustible,el sistemade encendido,el catalizador,losdep6sitosde combustible,abastecede combustiblelineas, gorrasde combustible,v&lvulas,latas,filtros,mangueras de vapor,abrazaderas,conectoresy otroscomponentesrelacionadosconlas emisiones. Dondeexistauna condici6ncubiertapor la garantia,MTDreparar&su motor pequeBopara equipotodoterrenosincostoalguno incluyendoel diagn6stico,laspiezasy la manode obra. COBERTURA DE LA GARANTJA DEL FABRICANTE: Este sistemade controlde emisionesse garantizapor el t@rminode dos a5os.Si algunapiezade su motorrelacionadacon lasemisioneses defectuosa,MTD reparar&o sustituir&dichapieza. RESPONSABJLIDADES DEL PROPIETARIO SEGUN LA GARANTJA: Comopropietariode un motorpequeSode equipotodoterreno,ustedes responsablede realizarel mantenimientonecesarioque figura en el manualdel propietario. MTDle recomiendaque conservetodos los recibosque cubrenlos serviciosde mantenimientodel motorpeque5opara equipotodoterreno,no obstanteIo cual MTDno podr&denegarel cumplimientode la garantiaQnicamentepor la falta de reciboso por su imposibilidadde asegurarque se realizar_.ntodos los serviciosde mantenimientoprogramado. Comopropietariodel motorpeque5oparaequipotodo terreno,sinembargo,ustedtambi@ndebesaberque MTDpuede denegarla coberturade la garantiasi su motorpeque5opara equipotodoterrenoo una piezadel mismofallandebido a usoincorrecto,negligencia,mantenimientoindebido o a modificacionesno aprobadas. Ustedes responsablede presentarla cortadorade cespedal centrode distribuci6no de mantenimientode MTDCONSUMERGROUP,INC. tan prontocomo aparecierael problem& Lasreparacionescubiertaspor la garantfasedeben Ilevara cabo en un lapsorazonableque no excedade 30 dias. Si desearealizaralgunaconsultacon respectoa la coberturade la garantia,debe ponerseen contactocon su distribuidorlocalde MTD. Paracomunicarseconla Linea de Asistenciaal Clientede Distribuidoresde MTD,Ilameal nQmero(877)282-8684. REQUERJMJENTOS DE GARANTJA SOBRE DEFECTOS PARA MOTORES PEQUENOS DE EQUJPO TODO TERRENO DE 1995YVERSJONES POSTERJORES: Esta secci6nse aplicaa motorespeque5osde equipotodo terrenode 1995y versionesposteriores.El periodode garantiacomienzaa partirde la fechaen que el motoro el equipo seentreganal compradorfinal. (a) Coberturade la garantiacontraemisionesgenerales MTDgarantizaal compradorfinaly a cada compradorsubsiguienteque el motor: (1) ha sido diseSado,construidoy equipadode maneraque cumplacontodas las regulacionesvigentesadoptadaspor el Departamentode los Recursosde Aire en virtud a suautoridadconferidaen los capitulos1 y 2, Parte5, Divisi6n26 del C6digode Saludy Seguridad;y (2) est,. librede defectosen los materialesyen la manode obra que causenla falla de una piezabajo garantiaque seaid@nticaen todos los aspectosmaterialesa la piezacomo aparecedescriptaen la aplicaci6ndel fabricantedel motorpara certificaci6npor un periodode dos a5os. _arantia sobre piezasrelacJonadas conemisJonesse interpretar_, de la sJguientemanera: (1) Cualquierpiezacubierta por garantiaque no est@programadapara su reemplazosegQnel mantenimientorequeridoen las instrucciones escritasde la Subsecci6n(c) debe estar garantizadapor un periodode garantiadefinidoen la Subsecci6n(a) (2). Si la piezafalladurante el periodode coberturade la garantia,la mismaser_.reparadao reemplazadapor MTD de acuerdocon la Subsecci6n(4) a continuaci6n. Cualquierpiezareparadao reemplazadasegQnla garantiasegarantizarB, por el resto del periodode garantia. (2) Cualquierpiezacubiertapor garantiaque est@programadasolopara inspecci6nregularen las instruccionesescritasde la Subsecci6n (c) debe estargarantizadapor un periodode garantiadefinidoen la Subsecci6n(a) (2). Unadeclaraci6nen dichasinstruccionespor escrito al efectode "reparaci6no reemplazosegQnseanecesario"no reducir_,el periodode coberturade la garantia.Cualquierpiezareparadao reernplazada segQn lagarantia segarantizar_, porelresto delperiodo degarantia. (3) Cualquier pieza garantizada queest_prograrnada parareernplazo segQn elrnantenirniento requerido deconforrnidad conlasinstrucclones escritas delaSubsecci6n (c)segarantiza porelperiodo detiernpo anterior alaprirnera fecha dereernplazo prograrnada para esa pieza. Silapieza fallaantes delprimer reernplazo programatic, larnisrna ser_. reparada oreernplazada porMTD deacuerdo conlaSubsecci6n (4)acontinuaci6n. Cualquier pieza reparada oreernplazada bajogaranfia segarantizar_, porelresto delperiodo anterior alprimer reernplazo programatic puntual paraesapieza. (4)Lareparaci6n oelreernplazo decualquier pieza garantizada deconforrnidad conlasdisposiciones delagaranfia queaquiseestipula se deberealizar enuncentro degaranfia sincosto alguno para elpropietario. (5)Sinperjuicio delasdisposiciones delaSubsecci6n (4)anterior, losservicios o reparaciones cubiertos porlagaranfia deben sersurninistrados portodos loscentros dedistribuci6n deMTDquetengan lafranquicia pararealizar reparaciones yrnantenirniento alosrnotores en cuesti6n. (6)Elpropietario nodebeafrontar ningQn cargo para trabajos dediagn6stico queIleven a laconclusi6n dequeunapieza bajogaranfia presenta efectivarnente defectos, siernpre ycuando dichodiagn6stico seaIlevado acabo enuncentro cubierto porlagarantia. (7)Elfabricante delmotor esresponsable porda_os causados aotros cornponentes dernotores derivados delafallabajogaranfia decualquier pieza garantizada. (8)Durante todoelperiodo degaranfia delmotor definido enlaSubsecci6n (a)(2),MTDrnantendr_, unsurninistro depiezas cubiertas por garantia suficiente para satisfacer ladernanda esperada paratalespiezas. (9)Cualquier pieza dereernplazo sepodr_, usarpara elcurnplirniento delrnantenirniento o reparaciones bajogaranfia, ysesurninistrar_, sin cargo alpropietario. Dicho usonoreducir_, lasobligaciones degarantia deMTD. (10)Nosepodr_.n usarpiezas adicionales nirnodificadas quenoest_n exentas deacuerdo conelDepartarnento delosRecursos delAire(Air Resources Board). Elusodepiezas adicionales ornodificadas noexentas ser_. causa suficiente para anular unreclarno bajogaranfia realizado deacuerdo conestearticulo. Elfabricante delmotor notendr_, responsabilidad, enconforrnidad conestearticulo, degarantizar fallas depiezas garantizadas quefueren causadas porelusodeunapieza noexenta adicional ornodificada. .(c) MTDincluir_,una copiade la siguientelistade piezasbajo garantiacontra ernisionescon cadanuevomotor,utilizandolas partesde la lista a_plicables al motor. (1) Sisternade rnedici6nde combustible • Sisternade rnejorapara inicioen frio (cebadosuave) • Carburadory cornponentesinternos • Bornbade combustible • Dep6sitode combustible (2) Sisternade inducci6nde aire • Filtrode aire • Colectorde entrada (3) Sisternade encendido • Bujia(s) • Sisternade encendidopor magneto (4) Sisternade escape • Catalizador • SAI (v_Jvulade Ca_a) (5) Cornponentesvarios utilizadosen el sisternaanterior • V_Jvulase interruptoresde vado, ternperatura,posici6nsensiblesal tiernpo • Conectoresy rnontajes (6) Controlde Evaporative • Manguerade CombustiblecertificadaparaARB evaporativeernisi6nde 2006. • Abrazaderasde Manguerade Combustible • Gorrade combustibleatada • Latade carb6n • Lineasde vapor GD0C-100174Rev.A GARANTiA LllVlITADA DELFABRICANTE PARA La siguiente garantia Nmitada es otorgada por MTD LLC con respecto a nuevos productos adquifidos y utiNzados en Estados Unidosy/o sus territorios y posesiones, y por MTD Products Limited con respecto a nuevos productos adquifidos y utiNzados en Canada y/o sus territorios y posesiones (cualquiera de las dos entidades, respectivamente, "MTD"). "MTD" garantiza este producto (excluidas las PiezasyAccesorios con Desgaste Normal seg_n se describe mAs abajo) contra defectos en los matefiales y mano de obra por un perfodo de dos (2) a_os a partir de la fecha de compra original y, a su opci6n, repararA o reemplazarA, sin costo alguno, cualquier pieza que presente defectos en los materiales o de mano de obra. Esta garantia Nmitada s61o se aplicarA si el producto ha sido operado y mantenido de acuerdo con las instrucciones del Manual del Operador que se proporciona con el producto y no ha sido objeto de uso inapropiado, abuso, uso comercial, abandono, accidente, mantenimiento incorrecto, alteraci6n, vandalismo, robo, incendio, inundaci6no alg_n da_o debido a otro peligro o desastre natural. El da_o resultante por la instalaci6no el uso de piezas, accesorios o uniones no aprobados por MTD para su uso con el (los) producto(s) incluido(s) en este manual anularA la garantfa en Io que respecta a esos da_os. Se garantiza que las Piezas con OesgasteNormal estAn fibres de defectos en los materiales y mano de obra por un perfodo de treinta (30) dfas a partir de la fecha de compra. Las piezas sujetas a desgaste normal incluyen pero no se limitan a: batefias, correas, cuchillas, adaptadores para cuchillas, dientes, bolsas para pasto, ruedas, ruedas para la plataforma de la mAquina, asientos, zapatas antideslizantes para la mAquina quitanieve, ruedas de fricci6n, placas de raspado, gomas helicoidales, aceite de motor, filtros de aire, bujias y neumAticos. Accesorios-- MTD garantiza que los accesorios de este producto estAn fibres de defectos de material y mano de obra durante un perfodo de un (1) a_o a partir de la fecha de compra o arrendamiento original del accesorio. Los accesorios incluyen, pero no se limitan a: colectores de c_sped y kits para abono. C6iViOSOLICITARf OBTENERSERVICIOTECNICO: El servicio de la garantfa estA disponible, CON COMPROBANTEDE COMPRA, a trav_s de su distribuidor local autorizado para el mantenimiento. Para Iocalizar al distribuidor de su zona: En Estados Unidos de America Consulte las pAginas amarillas, o p6ngase en contacto con MTD LLC en P.O. Box 361131, Cleveland, Ohio 44136-0019, Ilame al 1-800-800-7310 o al 1-330-220.4683, o visite nuestro sitio web en www.mtdproducts.com. b. Los artfculos necesarios para el mantenimiento de rutina como por ejemplo lubricantes, filtros, afiladores de cuchillas, sincronizaci6n del motor, los ajustes de los frenos, del embrague o de la plataforma y el deterioro normal del acabado exterior debido al uso o exposici6n. c. Mantenimiento no realizado por el distribuidor de servicio autorizado. d. MTD no extiende ninguna garantia para los productos vendidos o exportados fuera de los Estados Unidos de America y/o CanadA, y sus respectivas posesiones y territorios, excepto para aquellos vendidos a trav_s de los canales autorizados de distribuci6n de exportaciones de MTD. e. Piezas de reemplazo que no son piezas genuinas de MTD. f. Gastos de transporte y visitas t_cnicas. g. MTD no garantiza este producto para uso comercial. No se aplican garantfas implfcitas, incluidas las garanfias impiicitas de comerciabilidad o de adecuaci6n para un prop6sito determinado, despu_s dei periodo de apiicacibn de ia garantia escfita expresa extendida m_s arriba para las piezas de acuerdo consu identificacibn. Ninguna otra garantfa expresa, oral o escrita, excepto la mencionada antefiormente, extendida pot personas o personasjuridicas, incluidos los distfibuidores o los minoristas con respecto a los productos, obligar_ a MTD. Durante ei piazo de ia garantfa el _nico recurso es la reparaci6n o reemplazo del productocomo se indic6 antefiormente. Las disposiciones incluidas en esta garantfa proveen el recurso _nico y exciusivo que surge de ias ventas. MTD no ser_ responsabie pot p_rdidas o da_os incidentaies o directos, inciuyendosin limites, los gastos incurridos para los servicios de cuidado dei pasto de reempiazo o cambio, o los gastos de aiquiier para reempiazar de manera transitoria un producto bajo garantfa. Algunos estados no permiten la exclusi6n o limitaci6n de los da_os y perjuicios incidentales o directos, o las limitaciones sobre la duraci6n de las garantias implfcitas, por Io que las exclusiones o limitaciones mencionadas anteriormente pueden no serle de aplicaci6n. En ningQncaso se obtendrA una compensaci6n mayor al monto del precio de compra del producto vendido. La alteraci6n de las caracterfsticas de seguridad del productoanular_ esta garantfa. Usted asume el riesgo y la responsabilidad de las p_rdidas, da_os o lesiones que sufran usted y sus bienes y / u otras personas y sus bienes como resultado del uso incorrecto o de lafalta de capacidad para usar este producto. Esta garantfa limitada alcanza solamente al comprador original, o a la persona que recibi6 el producto de regalo. EnCanad_ COiVlOSE RELACIONALA LEGISLACI6N ESTATALCON ESTA Contacte MTD Products Limited, Kitchener, ON N2G4J1, Ilame al 1-800-668-1238 o visite nuestro sitio web en www.mtdcanada.com. GARANTiA: Esta garantfa limitada le otorga derechos legales especificos y usted tambi_n puede tener otros derechos que varfan de un estado a otro. Esta garantfa limitada no ofrece cobertura en los siguientes casos: a. Las bombas, vAIvulas y cilindros del rompetroncos tienen una garantfa separada de un a_o. IMPORTANTE: El propietario debe presentar comprobante de compra original para obtener la cobertura de la garantfa. IVITDLLC. P.O. BOX361131 CLEVELAND,OHIO44135-0019, Tel_fono:1-800-600-7310, 1-330-220-4583 IVITDCanada Limited - KITCHENER,ON N2G4J1; tel6fono 1-800-568-1238 GDOC-100016 REV. B
This document in other languages
- español: MTD 41M