Download Code Code Reader 1000 Operating instructions

Maintenance
Chapter 8
Operating Instructions
CLV63x Bar Code Scanner
8.2.1
Cleaning the reading window
Damage to the reading window!
Reduced reading capacity due to scratches or smears on the reading window!
The reading window for versions CLV63x-xxx0 is made of glass.
¾
Do not use aggressive cleaning agents.
¾
Do not use cleaning agents which cause increased abrasion (e.g. powder).
¾
Avoid cleaning motions on the reading window which could cause scratches or abrasion.
Damage to the reading window!
Reduced reading capacity due to scratches or smears on the reading window!
The reading window for versions CLV63x-xxx1 is made of plastic.
Important
¾
Only clean the reading window with a damp cloth.
¾
Use mild cleansing agents without powder. Do not use strong cleansing agents such
as acetone.
¾
Avoid cleaning motions on the reading window which could cause scratches or abrasion.
Electrostatic charges cause dust particles to stick to the reading window. This effect can be
combated by using anti-static SICK synthetic cleaner (no. 5600006) in combination with a
SICK lens cloth (no. 4003353).
Cleaning the reading window:
72
¾
Switch off the device while you are cleaning it (see Laser protection).
¾
Use a clean, soft brush to free the (glass) reading window from dust.
¾
If necessary, additionally clean the (glass) reading window with a clean, damp, lint-free
cloth and a mild, anti-static window cleaning fluid.
¾
Only clean the (plastic) reading window with a clean, damp, lint-free cloth and a mild,
anti-static window cleaning fluid.
© SICK AG · Division Auto Ident · Germany · All rights reserved
8011970/S345/2008-04-16