Download Bosch SM070 Specifications

Transcript
18 | Vertical Configurability
SM Series Heat Pump
7. Remove and retain side panel blower opening
cover by removing (6) phillips head screws and
cutting/tearing insulation at perforations
around the perimeter of cover.(Figures #53
and #54)
Figure # 51
6. Remove and discard blower collar. (Figure
#52)
Discharge air configuration change is not
possible on Heat Pumps equipped with
Electric Heat Option.
Figure # 53
2
1
FRONT OF THE PANEL VIEW
Figure # 52
Figure # 54
8. Reinstall blower opening cover in the TOP
panel. (Figure #55)
Figure # 55
6 720 220 406 (2013/9)
Subject to change without prior notice
SM Series Heat Pump