Download 505-CP2572

Connecting the
Module to the
Network
You can choose to connect the module directly to 10BaseT cabling or, via a
transceiver, to any IEEE 802.3 compliant media. See Section 2.6,
Connecting Cables.
Checking Out the
Module
You can use both the module indicators and commonly available software to
ensure the module is operating properly. Section 2.7, Module Checkout
describes this procedure. Chapter 4 also describes the module operation.
Using the Module
Assuming you have completed the above steps successfully, the 505-CP2572
is ready for use as a PLC Server. If you wish to implement PLC Client
functions, refer to Chapter 3 of this manual.
SIMATIC 505-CP2572 Ethernet TCP/IP User Manual
Module Description
1-17