1
Download ADAM 4000 - Cole
Transcript
Command Set ADAM-4016 Command Table Command Syntax %AANNTTCCFF Command Name Configuration #AA Read Analog Input $AA0 Span Calibration $AA1 Offset Calibration $AA2 Configuration Status #** Synchronized Sampling $AA4 Read Synchronized Data $AAF Read Firmware Version $AAM Read Module Name 4-12 ADAM 4000 Series User’s Manual Command Description Set the address, input range, baud rate, data format, checksum status and/or integration time for the specified analog input module Return the input value from the specified analog input module in the currently configured data format Calibrate an analog input module to correct for gain errors Calibrate an analog input module to correct for offset errors Return the configuration parameters for the specified analog input module Orders all analog input modules to sample their input values and store them in special registers Returns the value that was stored in the specified module's register after the #** command Return the firmware version code from the specified analog input module Return the module name from the specified analog input module Page No. 4-47 4-55 4-60 4-61 4-51 4-62 4-63 4-53 4-54
