Download 1 - Finepoint

REMOTE-IN
REMOTE-OUT
D-sub 9-pin, female, for connection
of another DSR-2000A/2000AP
unit or other editing controller,
complying with RS-422A
D-sub 9-pin, female, for loopthrough output of signals from the
REMOTE-IN connector
Accessories supplied
AC power cord (1)
Operating Instructions
English version (1)
CD-ROM manual (1)
Analog audio output
AUDIO OUT
XLR 3-pin (male) ×4, +4/0/–6 dBu
(selectable by menu setting),
600 Ω loaded, low impedance,
balanced
MONITOR AUDIO
Phono jack ×1, 47 kΩ, unbalanced
–∞ to –11 dBu ±1 dBu, –20 dBFS
(DSR-2000A)
–∞ to –9 dBu ±1 dBu, –18 dBFS
(DSR-2000AP)
Accessories not supplied
Digital audio output
DIGITAL AUDIO (AES/EBU) OUT CH-1/2, CH-3/4
BNC×2, complying with AES-3id1995
Design and specifications are subject to change
without notice.
Headphone output
HEADPHONES Stereo phone jack ×1, 8 Ω,
unbalanced
–∞ to –13 dBu, –20 dBFS
(DSR-2000A)
–∞ to –11 dBu, –18 dBFS
(DSR-2000AP)
Timecode output
TIME CODE OUT
BNC type ×1, SMPTE (DSR2000A)/EBU (DSR-2000AP)
2.2 Vp-p±3.0 dB, unbalanced,
(when 600 Ω terminated)
Control connectors
VIDEO CONTROL
D-sub 15-pin, male, for connection
of optional UVR-60/60P or BVR50/50P
CONTROL PANEL
D-sub 15-pin, female
Appendixes
DIN 4-pin ×1
Y: 1.0 Vp-p, 75 Ω, sync negative
C: 0.286 Vp-p (DSR-2000A) or
0.3 Vp-p (DSR-2000AP), 75 Ω
(burst level)
COMPONENT VIDEO OUT Y/R–Y/B–Y
BNC type ×3, component video
Y: 1.0 Vp-p, 75 Ω, sync negative
R–Y: 0.7 Vp-p, 75 Ω (75% color
bars for DSR-2000A or 100%
color bars for DSR-2000AP)
B–Y: 0.7Vp-p, 75 Ω (75% color
bars for DSR-2000A or 100%
color bars for DSR-2000AP)
S VIDEO OUT
RCC-5G 9-pin Remote Control Cable (5 m (16 ft) long)
RMM-131/1 Rack Mount Kit
PDV-64*/94*/124*/184*/34* Digital Video Cassette
(standard size) a)
PDVM-12*/22*/32*/40* Digital Video Cassette (mini-size) a)
a) The * in each model name is actually “ME”
(indicating that a cassette memory is contained), or
“N” (indicating that no cassette memory is contained).
DV12CL Cleaning Cassette (standard size)
DVM12CL Cleaning Cassette (mini-size)
Notes
• Always make a test recording, and verify that it
was recorded successfully.
SONY WILL NOT BE LIABLE FOR DAMAGES
OF ANY KIND INCLUDING, BUT NOT
LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF
FAILURE OF THIS UNIT OR ITS RECORDING
MEDIA, EXTERNAL STORAGE SYSTEMS OR
ANY OTHER MEDIA OR STORAGE SYSTEMS
TO RECORD CONTENT OF ANY TYPE.
• Always verify that the unit is operating properly
before use.
SONY WILL NOT BE LIABLE FOR DAMAGES
OF ANY KIND INCLUDING, BUT NOT
LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE
LOSS OF PRESENT OR PROSPECTIVE
PROFITS DUE TO FAILURE OF THIS UNIT,
EITHER DURING THE WARRANTY PERIOD
OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON
WHATSOEVER.
Appendixes
143