1
Download 1 - Finepoint
Transcript
Recording Time Code and User Bit Values There are the following two ways of recording time code: • Setting an initial value, then recording the output of the internal time code generator • Recording the output of the internal time code generator synchronized to an external time code generator To set an initial value then record the time code Use the procedure described in the section “Setting an initial time code value” (page 40), then carry out the recording operation (see page 48). Setting the time code value to the current time See page 41. Setting a user bit value See page 43. Chapter 3 Recording and Playback 47 Recording and Playback To synchronize the internal time code generator to an external signal Chapter 3 See page 42.
