Download DNP Messages Reference

________________
Control Computer Messages
Report Failure 8804
*
<YY-MM-DD> <hh:mm:ss> NODE=<xxx...x>
8804 MODADDR=<addr> PORT=<num> MODTYPE=lpm
REPORT STATUS: syncmaint: Link Integrity has been established on LAN port.
Message Explanation
Link integrity has been established on the indicated LAN port. The condition reported in
Report Failure 8803 has been cleared. This message is also displayed when a LAN port is
restored to service and link integrity is detected.
Recommended Action
No action is required.
Report Alarm 8805
<YY-MM-DD> <hh:mm:ss> NODE=<xxx...x>
** 8805<B> MODADDR=<addr> MODTYPE=<type>
REPORT ALARM: syncmaint: Module has gone into buffer congestion.
CLASS=<num> TASKID=<num>
Message Explanation
An insufficient number of buffers are available for data transport. The module is overloaded and
data could be lost.
Recommended Action
Follow procedures in the Troubleshooting chapter of the appropriate module reference to
determine corrective action.
Report Status 8806
<YY-MM-DD> <hh:mm:ss> NODE=<xxx...x>
8806<B> MODADDR=<addr> MODTYPE=<type>
REPORT STATUS: syncmaint: Module has come out of buffer congestion.
CLASS=<num> TASKID=<num>
Message Explanation
This alarm clears Report Alarm 8805 .
Recommended Action
No action is required.
Data Networking Products Messages Reference, Issue 5
2-443