Download Warning - Nikon

Getting Started
3
When you move the cursor to a field, the current or default value appears in
inverted text (this is the default “Replace All” input mode).
Press [>] to change the input mode to Overwrite mode and highlight the first
character. Press [<] to move the cursor the end of the string.
Entering a point from the stack
The point stack is a list of recently used points. To
display the stack, press the Stack softkey when the
cursor is in the PT field.
Use [^] or [v] to move the cursor to the point that you
want to use. Then press [ENT].
When you return to the point input screen, the selected
point name is entered in the PT field, incremented by
one. For example, if you selected the A101 point,
A102 appears in the PT field.
The stack shows the last 20 point names used, in chronological order from last used to first used.
Entering a point from the point list
To display a list of existing points, press the List
softkey when the cursor is in the PT field.
Use [^] or [v] to move the cursor to the point that you
want to use. Then press [ENT].
When you return to the point input screen, the selected
point name is entered in the PT field. You can add
digits or alphabetic characters if required.
Total Station Nivo Series Instruction Manual
43