1
Download Trimble M1 DR Series Total Station User Guide
Transcript
4 – Applications 4. Choose a method to define the arc. P2 can be any point on the tangent line that is to exit the curve. 5. In the radius (Rad) field, enter a positive value for a clockwise curve. Enter a negative value for a counterclockwise curve. When all factors have been entered, the instrument calculates the curve. If the curve length (Len) is too large for a circle of the given radius, it is shortened. To ... Press ... switch between display screens [DSP] change HT [HOT] record points [ENT] TRIMBLE M1 DR TOTAL STATION USER GUIDE 78
