Download USER MANUAL - OPERATING GUIDE

Setting up
Connecting your devices
Be sure to read the manuals for devices before connecting them to the projector.
Make sure that all the devices are suitable to be connected with this product, and
prepare the cables required to connect.
Please refer to the following illustrations to connect them.
AUDIO OUT
RGB OUT
RS-232C
RGB OUT
AUDIO OUT
LAN
HDMI
USB-A
PC
USB storage
SD card
Remote
control
LAN
RGB1
RGB
OUT
Y
VIDEO
HDMI
CB/PB
CR/PR
AUDIO IN 1
AUDIO IN 2
Monitor
RGB2
G/Y B/CB/PB B/CR/PR
H
R
L AUDIO OUT
AUDIO IN 4
REMOTE
CONTROL
Speakers
(wiht an
amplifier)
V
USB
CONTROL
RGB IN
R
L
AUDO IN 3
AUDIO IN
S-VIDEO OUT
R
L
AUDO IN OUT
VIDEO OUT
R
L
AUDO IN OUT
Y
CB/PB
CR/PR
COMPONENT VIDEO OUT
R
L
AUDO IN OUT
VCR/DVD player
WARNING ►Do not disassemble or modify the projector.
►Be careful not to damage the cables, and do not use damaged cables.
CAUTION ►Turn off all devices and unplug their power cords prior to
connecting them to projector. Connecting a live device to the projector may
generate extremely loud noises or other abnormalities that may result in
malfunction or damage to the device and the projector.
►Use appropriate accessory or designated cables. Ask your dealer about nonaccessory cables which may be required a specific length or a ferrite core by
the regulations. For cables with a core only at one end, connect the end with the
core to the projector.
►Make sure that devices are connected to the correct ports. An incorrect
connection may result in malfunction or damage to the device and the projector.
►For safety, do not connect the LAN port to any network that might have
excessive voltage.
LX400 User Manual - Operating Guide
10
020-000169-03 Rev. 1 (11-2010)