Download User Manual


Sensitivity – Adjusts window sensitivity from 0 (low) to 100 (high).

Trigger Threshold - Adjusts the amount of change allowed before
and event is triggered.
6. Click OK to save the changes and exit the popup.
Testing Detection Windows
1. Right-click the camera entry in the list of the Live View, then highlight and
click the VI Setup > General Motion Detection option.
2. Click Save Reference Image to have a reference image saved and the
system will use this saved image to compare with the live recording image
to see if there is any different; when the 2 images are different, the alarm
will be triggered.
3. Click the Begin Simulation button enable test detection. During testing a
red border will appear around any moving objects detected.
4. Click End Simulation to end the simulation.
5. Click OK to exit the popup.
Deleting a Detection Window
1. Right-click the camera entry in the Camera List below the Live View, then
highlight and click the VI Setup > General Motion Detection option.
2. Highlight an existing detection window.
3. Click the Clear button to delete the window.
4. Click OK to save the changes and exit the popup.
137