Download IP CAMERA User`s Manual

2.10
MOTION
Motion Detection Settings
Motion Detection 1~3
Select motion detection window
User can select 3 areas for motion detection
Name
Motion name
Enable
ON/OFF
Sensitivity
10% (low) ~ 100%(high)
Threshold
The smallest detectable sensation. 10% (easy to trigger) ~ 100% (hard to
trigger)
Alarm Picture
Enable
ON/OFF, if set to ON , it will save picture on SD memory card.
Alarm Video
Enable
ON/OFF, if set to ON , it will save video image on SD memory card.
Pre-Alarm
Set from 1 to 10 seconds , record video before motion trigger .
Post-Alarm Set from 1 to 10 seconds , record video after motion trigger .
Alarm Action
Alarm Mail
ON/OFF, if On is set, captured image or video clip will be sent to user’s
mail.
Alarm FTP
ON/OFF, if On is set, captured image or video clip will be sent to user’s
FTP.
DIO
GPIO output dwell time .
21