Download Users Manual - About Projectors

Adjustments and functions (continued)
SET UP
Images and display positions can be adjusted from the SETUP menu.
Video signal input
RGB signal input
SETUP
INPUT
IMAGE
VOLUME
BRIGHT
CONTRAST
V POSIT
H POSIT
H PHASE
H SIZE
COLOR BAL R
COLOR BAL B
SETUP
O P T.
800
VOLUME
BRIGHT
(BRIGHTNESS)
CONTRAST
SHARPNESS
COLOR
TINT
IMAGE
O P T.
VOLUME
BRIGHT
CONTRAST
SHARPNESS
COLOR
TINT
COLOR BAL R
COLOR BAL B
100
100
Adjustment item
INPUT
Adjustment description
Volume decreases
Darker
Lower contrast
Softer image
Less
Redder
Volume increases
Brighter
Stronger contrast
Sharper image
More
Greener
V. POSIT
(V. POSITION)
Moves the image up and down.
H. POSIT
(H. POSITION)
Moves the image left and right.
H. PHASE
Eliminates blanking.
H. SIZE
Adjusts the horizontal size of the image.
COLOR BAL R
(COLOR BALANCE Red)
Less Red
More Red
COLOR BAL B
(COLOR BALANCE Blue)
Less Blue
More Blue
Using the SETUP Menu
Move the cursor to the item to be adjusted and move the MENU button of the projector or the DISK PA
button of the remote control to change the length of the bar display.
Caution
18
• The menu cannot be displayed while the initial screen (“No input is detected.” or “Sync is
out of range.”) is being displayed.
• Tint cannot be adjusted with PAL or SECAM video signal input.
• Tint, color and sharpness cannot be adjusted with RGB signal input.
• V. POSIT, H. POSIT, H. PHASE and H. SIZE cannot be adjusted with video signal input.
• The MAGNIFY or FREEZE function will be cancelled after the operation "Menu".
• Displaying the menu cancels magnify and freeze operations.