Download LASER CONTROL PANNEL By:

SaleCNC.com carving cutter user’s manual
Press “Up” and “Down” keys to select 002, and press “Enter” key to go to the next interface:
Press “Enter” key again to go to the next interface:
Press “Enter” key again to write the file.
Progress bar
After the reading operation, press “Esc” to return to the previous interface.
Warning: If you cancel operation or shut down the system, or power supply fails in
the writing process, error may occur in the working process. It is suggested to read
it after deletion.
If the following interface is displayed,
It means that the flash disk is not properly inserted or the system’s flash disk transmission part fails. In
this case, press “Esc” key to return to the previous interface.
9
GuangZhou City,China
E-mail:[email protected]