1
Download to view the file - Support On Line
Transcript
GCOS 7 System Operator's Guide
8.5.22
START_TERMINAL_OUTPUT (STO)
Purpose
Starts the printing of outputs on a terminal or pool of terminals; modifies the class
of outputs handled by a terminal. Only the owner of the object terminal or users
declared as Master Operators for the Generalized Terminal Writer may use this
command. Refer to the GTWriter User's Guide for a complete description.
Syntax
----------------------------{ START_TERMINAL_OUTPUT }
{ STO
}
{ TERM }
{
}
{ TN
}
=
name12
[SELCLASS = a[-a]]
Parameters
TERM
the name of the terminal or pool of terminals where
outputs are printed.
SELCLASS
specifies the class (SELCLASS = a) or range of classes
(SELCLASS = a-a) of outputs that can be printed on
the terminal or pool of terminals. If the terminal or
pool is already started, the selected classes are added to
the list of those that are eligible for printing on the
terminal or pool.
Rules
None.
Examples
8-130
STO POOL3
{Start printing on terminal pool POOL3.}
STO TERM3 A-Q
{Start printing on terminal TERM3 for classes A
through Q.}
47 A2 53US
