Download User`s manual

NVR-3304, NVR-3308, NVR-3326 User’s manual ver.1.0
- no network connection with the camera
- connection OK
Press right mouse button on added camera to open menu
Check network status with PING
Check if network connection is correct
Edit basic network settings ,IP address and port, username/password,
Remove camera configuration from channel
Advanced camera settings: camera name, time settings , stream settings.
Exchange camera configuration with other channel
FRONTSET menu gives you ability to manage the following camera settings :

BASIC - allows to configure basic settings like : channel name, time in camera, time
synchronization with NVR

ENCODING - settings for main and secondary stream (function is available for the selected
camera models) : Compression, code level, resolution, frame rate, bit rate control, quality,
I-frame interval

NETWORK - allows to change network settings in network (feature will be available in the
future)

SNAPSHOT - allow to change settings for capturing jpg images from video stream (feature will
be available in the future)

DETECTION - change motion detection settings (feature will be available in the future)
To add camera settings manually press HANDADD button. After entering camera data press OK or
APP button to save the settings.
To show current statistic about connected channels press STATUS button.
To remove camera form channel list press DELETE button.
All rights reserved © AAT Holding sp. z o.o.
26