Download XL PRO - Legrand E

The “Quantity” field can be used to adjust the
number of products to be modified. Thus, if the
parts list of your panel contains several identical
products, it is possible to change only some of
them by adjusting the quantity required before
confirming the operation. By default, the quantity
is set to the total number of products.
Adding an auxiliary to a DPX MCB
To install an emergency circuit breaking device for
the entire panel, the main device must be fitted with
a release.
- Right-click on the line DPX 4P 4D 250 A MCB in the
active list
- Select Modify in the popup menu
In the same way, right-clicking on a cabling product
enables you, as with any other product, to Modify its
characteristics and also to Delete the association.
Details of how to select a distribution block/busbar
are given on pages 17 and 26.
C. Deletion
To delete one or more
products, select Delete in the
popup menu. In the window
that appears, adjust the
number of products you want
to remove then click on the
Delete button.
- In the Shunt & undervoltage auxiliaries column
select a Shunt 230V ac/dc coil
- Click on the
Confirm button.
If you return to the list of products in the Parts list
module and click on the
to the left of the MCB
you can see that the release has been added.
TIP
It is not possible to delete an associated product
or an accessory directly, as this operation would
delete the main product. The latter forms a whole
together with its associated products. The Modify
option must be used to perform this type of
operation.
WARNING
Remember to configure automatic saving in the
Study menu > Configure auto saving
19
XL PRO2 IN PRACTICE > Parts List module > I. Modifications
2. Changing a busbar
TIP