Download User Manual - NBS Technologies
Transcript
Printing a Sample Card Once you completed creating your sample card, you are ready to print. Ensure your printer has a Javelin branded TrueColoursTM card printer ribbon cartridge installed. Refer to chapter 2 for instructions on installing the ribbon and loading the card. Print your sample card as follows: 1. Select file>print to open the print dialogue box. Ensure the following settings in the print dialogue box: Printer name: - Javelin J100i card printer Print to file: - Unchecked Page range: - All Number of copies: - 1 Collate: - Unchecked Print what?: - Document Print: - All pages in range Pages per sheet: - 1 page Scale to paper size: - No scaling 2. Click the OK button. 3. Feed in a card and start printing. The data download time will vary depending on the complexity of the card design and the processing speed of the computer. 4. Once the printing is completed, the card is ejected from the printer. 5. Check for any discrepancies. If the sample card is correct, your printer is ready to produce more cards. 18