Download FLEXMATIC E - AET Flexible Space

Flexface E / Flexmatic E 2015
2.3 Eprom / Flash memory
The Eprom / flash is the device which stores the program the Flexface or Flexmatic E that
has to work with. It doesn’t store any user-settings - this is done by the device itself (in the
RAM and the Eprom). The version name and the number are printed on the Eprom / flash
label. The following Eproms / flashes are currently used for AET Flexible Space units (the
xxx is a placeholder for the actual version):
HVM Eprom........................................................................
Bit 1.00.xxx.......................................................................For Flexface E 24V AC
HVE 1.00.xxx Flash, 4 MBit, For Flexmatic E.
Figure 4 – Eprom (top) and Eprom Remover Tool
Power-off the device before mounting/dismounting the Eprom. Remove Eprom
only with a special tool; never use a screwdriver. For correct installation
direction, please refer to section 2.1 and Section 2.7.2 Flexmatic connection.
6|Page