Download User Manual - Barcode Datalink

Display and Symbols
Meaning
Example. Storing the unit mass of the counting mode.
This is a display of zero point for the counting mode and
uses 20 pieces for the registration.
Example. Storing the unit mass of the counting mode.
The sign "-" means "weighing value is not zero".
Sample number is 10 pieces.
Example. Percentage mode.
This mode uses the registered 100% mass, and converts
the weighing value to a percentage. The unit is % .
Example. Display of the function table.
This function table sets parameters of items.
＜ key
Selecting an item.
∧ key
Selecting the parameter of an item.
ENTER key
Storing new parameters.
Example. Preset tare. Entering tare with digital input.
＜ key
Selecting a figure.
∧ key
Selecting a number.
ENTER key
Storing a new tare.
Fixed value
Example. Hold display
The hold display is set using f12 of the function table.
When the value is "nearly-zero" or changes more than
25% +30 digits, the hold is canceled.
Over load display.
Remove the mass from the weighing pan.
Weighing error.
Check the base unit and weighing pan.
Calibration error.
The calibration mass is too light.
Check the base unit and weighing pan.
Calibration error.
The calibration mass is too heavy.
Check the base unit and weighing pan.
The " nearly-zero " is within ±4 digits from zero point in the unit of kg.
HVG-WP Series
Page 13
6.1. Display and Symbols
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A