Download - Wiedamark

0-10V OPERATION - WHITE LIGHT DIMMING
For 0-10v dimming operation DIP switch 10 must be ON, the Manual Dimming
Control on the side panel must be turned to minimum (fully counter
clockwise), and the RJ45 plug must be plugged into the right hand RJ45
socket on the side panel.
The illuminator can be dimmed from 0 (0 Volts DC) to 100% (10V DC) with a
receiving 0-10V signal.
0-10V OPERATION - DECORATIVE WHEEL CONTROL
For 0-10v wheel control DIP switch 10 must be ON, and the RJ45 plug must be
plugged into the left hand RJ45 socket on the side panel.
The illuminator decorative wheel can be controlled with a receiving 0-10V
signal as detailed in the following 0-10V value table.
Function
Value
Description
Color Wheel
Color Wheel
Color Wheel
Color Wheel
Color Wheel
Color Wheel
Color Wheel
Color Wheel
Color Wheel
Color Wheel
Color Wheel
Color Wheel
Color Wheel
Color Wheel
Color Wheel
0V
0.4V
0.8V
1.2V
1.6V
2V
2.3V
2.6V
3V
3.6V
4V
4.4V
4.6V
5.4V to 9.2V
9.3V to 10V
White (Color 1)
Yellow (Color 2)
Green (Color 3)
Orange (Color 4)
Magenta (Color 5)
Blue (Color 6)
Returns to White (Color 1)
Blue (Color 6)
Magenta (Color 5)
Orange (Color 4)
Green (Color 3)
Yellow (Color 2)
White (Color 1)
Slow to fast clockwise*
Fast counter clockwise*
NOTE:
For Twinkle wheel control use values marked*
Universal Fiber Optics
7