Download MSecure Antivirus

Malware Secure Antivirus
User Manual
Introduction:
Welcome to Malware Secure antivirus home and business editions.
MSecure antivirus is a collection of high end technologies that work in perfect
synergy, having one common goal: to protect your system & network and
valuable data against computer viruses. It represents a best in class solution for
any Windows based workstation.
MSecure antivirus incorporates antivirus, anti-spyware antimalware & antirookit
technology, stupendous & sophisticated strong self protection capabilities to
ensure that your valuable data and programs are always protected.
This manual describes the MSecure antivirus installation and operation.
For further options and information, please visit our website:
www.msecuredatalabs.com
Your MSecure Team.
INSTALLATION:
Before starting installation:
 Make sure that no other virus protection solutions are installed. The
automatic protection functions of various security solutions may interfere
with each other.
 Establish an Internet connection for downloading the setup.
Install: The installation program runs in self-explanatory dialog mode. Every
window contains certain selection of buttons to control the installation process.
The most important buttons are assigned the following functions:
NEXT : Go to next step
BACK : Go to previous step
INSTALL: To process installation
FINISH: Action finished
Installing your AntiVirus program:
To complete the installation process it will be necessary to run the
“msetup.exe” installation file by giving double click on it.
Clicking “yes” will take you to the MSecure antivirus Setup screen:
Click “Next” and the installation wizard will then guide you through the rest of the
installation process.
First you will be asked to read about the minimum system requirements and then
to confirm you to agree to the end-user license conditions.
To continue, it is necessary to click on “I accept the agreement”, this enables
“Next” for further steps.
Click on “Next” will navigate you to destination selection window.
You will be asked to confirm the destination directory, i.e. where the program
files should be saved. The program will select this automatically or will create a
new directory if it doesn’t already exist. It is recommended to accept the default
destination directory and simply click on “next” to continue.
In the next screen, you will be asked to confirm the Update Definition Server
Source. The option suitable for most users is automatically selected as global
Update Server. Unless you wish to change to Network Update Server click on
“Next”
It will take you to the “select start menu folder” window to place the program’s
shortcuts. By default it will store in the “Malware Secure” folder, otherwise you
can browse the different location. Click on “Next” to continue.
Now the set up is ready to install the Malware Secure antivirus. Click on “install”
for installation process.
The installation process will be shown on display in green colored bar as shown in
the below screens.
The complete green colored bar confirms that installation has been successfully
completed and ensures you with “finish” setup wizard.
Click on “finish” to complete the process.
With this the installation task has been completed.
WORKING WITH AV:
After installation you will get shortcut icon of malware secure anti-virus in your
taskbar. To see the details of AV click on that icon.
If you give right click on that icon it will show options to view GUI, Update, and
Real-time protection options as shown below.
Main GUI will be as shown in figure with following features.
Protection:
Protection tab will show you the complete view of the system’s protection.
If Protection status is not in green color i.e. if it is in red color showing some kind
of risk then the system is not in the fully protected state.
If the four options are in green color then the system is having the Maximum
security as shown in the picture.
Protection tab will show when the last scan is carried out and auto updates are
for how many hours and the validation time.
Scan:
In the SCAN tab, we can scan the system in three ways.
Quick Scan means, it will scan the Registries.
Full Scan means, it will scan the whole system and it will take more time.
Custom Scan means, it will ask what has to be scan. If the interested device or
part of the system is selected then it will scan only the selected ones.
Finally, it will give the result like threats are found or 0 threads cleaned etc…
So, you have to choose one option to scan.
For example you selected Quick Scan, then click on “SCAN NOW” to process the
scanning.
Now the Scanning Process is going on your system.
It will scan only the registries but not whole system.
If you want to scan the whole system then select the option “Full”.
Then click on “SCAN NOW” to do the scanning process.
Full Scan takes more time. It will be in hours.
It will give the completed percentage of scanning process and infected objects
and what are the various viruses or warms infected those objects.
You have to do the actions if there are any threats.
You can stop/pause the scanning process in the middle of the process.
If you want to scan the external devices or some parts in your system then select
the option “Custom”.
Then click on “SCAN NOW” to do the scanning process.
You can also scan the files by giving right click on the file which shows you many
options. There click to scan with MSecure.
When you insert mass storage devices it shows you the alert to scan that device
as shown below.
After scan finished it shows you the alert that shows which type of scan finished,
how many objects scanned, number of threats and how much time it will take to
scan as shown in image.
Update:
If you want to update the antivirus version then we can update it in the “Update”
tab. The process to update is given in the below pictures. It will also shows virus
signature date and version and also kernel version.
You can update AV by manually also. Click on Browse option and find t3file
location to update through it and click on Apply Update will Update your AV as
shown in following images.
The AV manual update is finished.
Logs:
“Logs” tab shows all logs regarding the antivirus working.
You can see in the left side, there will be six tabs.
You can see all logs about the individual tabs.
If you want to clear the logs then you can clear all the logs in this “logs” tab.
Protection tab shows the logs regarding the system’s protection.
Scan tab gives the properties like when the scanning process was carried out and
what is the current version etc…
Update
tab
shows
all
the
logs
regarding
the
update
options.s
Device tab shows you the devices that are scanned i.e. external or internal
devices.
Event tab shows you the properties like whether the scanning process is
completed or not and whether the updating current version has done by manually
or automatically etc…
Quarantine tab shows you the malicious programs which infect the system like
trap doors, logic bombs, worms etc…
Settings:
Protection:
Now, the round symbol in the right side is Settings tab.
If you want to change the settings regarding the scanning options you can change
here. You can set the file size limit as your wish.
In the protection tab you can enable or disable the scanning options for the
interested devices.
You can include or exclude the scanning options regarding the external devices
when it is connected to the system.
You can set the scanning options for your current programs.
After your setting process is completed then click on “APPLY” to apply the
changes you have done.
For example if you disable code emulations it results in protection status of code
emulations at risk as shown below images.
Scanner:
In the Scanner tab, you can have more options about scanning.
If you want to change the scanning process settings you can change here.
You can include the extensions to scan automatically when the program is in
running.
After your setting process is completed then click on “APPLY” to apply the
modifications that you have made.
Update:
In Update tab, you can enable or disable the automatic updates.
You can set the Update source i.e. local or global.
You can set weather to use proxy server or not.
After your setting process is completed then click on “APPLY” to apply the
changes you have done.
Devices:
In the device tab, you can disable or enable the external devices.
You can give the permission to the external devices.
After your setting process is completed then click on “APPLY” to apply the
changes you have done.
Scheduler:
In the Scheduler tab you can schedule when will be the system scanning have to
be carried out. Here you can change the default scanning (full or custom scan).
If you want every day scanning to your system, then select all the days.
After your setting process is completed then click on “APPLY” to apply to save the
changes.
Logs:
In Logs tab you can change the settings regarding the logs.
If you want to delete the logs before 30 days you can set the option to 30 days.
Regarding malicious programs also you have choice to set the option.
After your setting process is completed then click on “APPLY” to apply the
changes you have done.
Notifications:
Notification tab will give the alert messages to the user.
If any malicious program enters into the system then it will give the alert message
to the user.
After your setting process is completed then click on “APPLY” to apply the
changes you have done.
Remote Console:
If your system is in a network and there is a server then Remote Console tab will
come into the picture.
If you have set a server IP and the port number then it will connected to that
particular network.
After your setting process is completed then click on “APPLY” to save the
necessary modifications you have made.
Password:
In the Password tab, you can set the password.
If you set the password then no one can change your settings regarding this
antivirus product.
Default password is empty.
After setting process is completed then click on “APPLY” to save the changes you
have done.
This is all about the installation and working features of the Malware Secure
Antivirus.
UNINSTALLING ANTI-VIRUS:
To uninstall the MSecure Network Update Server follow the below steps.
Click on the Start Menu button on the taskbar there go to Control Panel.
There you can see many settings, go to “programs” settings and click on “uninstall
a program”.
After clicking on that, it will navigate you to the all system programs that you are
installed. There select “Malware Secure Version 9.0.4.1” program and give right
click on that. Then it will show you the option to uninstall the program as shown
in below images.
Then click on Uninstall then it will show you confirmation window. If you still want
to uninstall the AV click on “yes”.
Then the process of un-installation will start and keep continue until the whole
green colored bar filled.
Uninstalling process will show that “the service has been stopped” in
command prompt.
After it has completed, un-installation successful acknowledge window will be
displayed.
Click on “ok” to close the window.
This is all about the uninstallation of MSecure Anti-Virus.