Download User`s Manual

Command Reference Guide
17.2.Command Summary
Function
Command Syntax
Command Access Level
Admin. SuperUser
User
ViewOnly
Display
Plug/Contact Status
/S [s] [Enter]
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Network Configuration Summary /RN [Enter]
X
X
X
X
IP Alias Summary
/SA [Enter]
X
X
X
X
Alarm Status
/AS [Enter]
X
Help Menu
/H [Enter]
X
X
X
X
X
X
Port Diagnostics
Port Parameters (Who)
Plug Group Status
Network Status
Log Functions
Current Metering
Site ID / Unit Information
Control
Exit Command Mode
Boot Plug/Contact n
Turn Plug/Contact n On
Turn Plug/Contact n Off
Default All Plugs/Contacts
Connect to SetUp Port
Disconnect from Port
Send Parameter File
Send SSH Keys
Unlock Invalid Access
Outbound Telnet
Outbound SSH
Configuration
System Parameters
Serial Port Parameters
Plug/Contact Parameters
Plug Group Parameters
Network Configuration - IPv4
Network Configuration - IPv6
Reboot Options
Alarm Configuration
Reboot System
Upgrade Firmware
Test Network Configuration
/SD [Enter]
/W [n] [Enter]
/SG [Enter]
/SN [Enter]
/L [Enter]
/M [Enter] 
X
X
/J [*] [Enter]
X
X
X
X
/X [Enter]
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
/BOOT <s>[,Y] [Enter]
/ON <s>[,Y] [Enter]
/OFF <s>[,Y] [Enter]
/DPL[,Y] [Enter]
/C [n] [Enter]
/D [n] [Enter]
/U [Enter]
X
/K <k> [Enter]
X
/UL [Enter]
X
/TELNET <ip> [port] [raw] [Enter]
/SSH <ip> -l <username> [Enter]
/F [Enter]
/P [n] [Enter]
/PL [Enter]
/G [Enter]
/N [Enter]
/N6 [Enter]
/RB [Enter]
/AC [Enter]
/I [Enter]
/UF [Enter]
X
X
X

X

X

X

X

X

X

X

X
X
X
/TEST [Enter]
X

In Administrator Mode and SuperUser Mode, all CCM plugs and contacts are displayed. In User Mode and ViewOnly Mode,
the Plug Status Screen will only include the plugs and contacts allowed by your account.

In Administrator Mode, all Plug Groups are displayed. In SuperUser Mode, User Mode and ViewOnly Mode, the Plug Group
Status Screen will only include the Plug Groups allowed by the account.

In Administrator Mode, the Help Menus will list all CCM commands. In the SuperUser Mode, User Mode and ViewOnly
Mode, the Help Menus will only list the commands allowed by the access level.


Current and Metering functions are not available for the switched contacts.


The ",Y" argument can be included in the command line to suppress the command confirmation prompt.

In SuperUser Mode, configuration menus can be displayed, but parameters cannot be changed.
If the optional asterisk (*) argument is included in the command line, this command will also show model numbers, current
ratings and software versions for the CCM unit.
In order to invoke this command, Outbound Telnet/SSH and Outbound Service Access must be enabled for your account.
17-2