Download User Guide

The Zeroplus Logic Analyzer
User’s Manual Ver. 3.10
Tip:
When the mouse is placed at the name
of the current Bar, the Bus state data
which belong to the Bar in the current
position will be displayed. See the
image in the right column.(the data of A
Bar in the position of Port A, Port B, Port
C and Port D are respectively 0X0056,
0X0000, 0X0000 and 0X0000).
Fig3-117: Display the Bar State window
Tip:
The function of Bar Width and
Connection Settings can be used by the
Bar with the Ctrl key, and the way of
using those functions are the same as
the function of the file check in
WINDOWS. Click the Ctrl key and the
connected Bar synchronously, then
double-click the Bar; the Bar Width and
Connection Settings dialog box will
appear. And the Bar Connection
function can be activated by the dialog
box, and the width between bars can be
set as users’ requirements. After
finishing those operations, many bars
can be moved at the same time.
Fig-118: Bar Width and Connection Settings Dialog Box
Activate Connection: Select whether activate the
function of the Bar connection.
Activate Width: Set the width between the connected
bars, and the unit is set as ns.
Fig-3-119: Drag more than Two Bars (The widths
between A Bar and B Bar, A Bar and C Bar are set as
15ns.)
Note: When any of the three bars is dragged, the A Bar, B
Bar and C Bar will move synchronously.
64
FM07I4A