Download 2 Switch Access

Advanced Configuration
Options: Link Up/Link Down
Description: After port alarm is enabled, Link Up is displayed for a port
connected properly. Link Down is displayed for a port disconnected or
connected abnormally.
DT-RING Alarm
Options: Ring Open/Ring Close
Description: After ring alarm is enabled, Ring Open is displayed for an open
ring while Ring Close is displayed for a closed ring.
6.20 Port Traffic Alarm
6.20.1 Overview
With the port traffic alarm function, the switch generates an alarm if the traffic
rate of a port exceeds the specified threshold or a CRC error occurs.
Caution:
 The traffic alarm function is based on a port. An alarm is generated only if the
function is enabled on a port.
 The traffic alarm function is direction-specific. Incoming and outgoing traffic
corresponds to different alarms.
 If a CRC error occurs, then a CRC error alarm is generated.
6.20.2 Web Configuration
1. Configure port traffic alarm, as shown in the following figure.
Figure 120 Configuring Port Traffic Alarm
122